57 lines
1.9 KiB
YAML
57 lines
1.9 KiB
YAML
# Describes the format for available services for KEBA charging staitons
|
|
|
|
request_data:
|
|
description: >
|
|
Request new data from the charging station.
|
|
|
|
authorize:
|
|
description: >
|
|
Authorizes a charging process with the predefined RFID tag of the configuration file.
|
|
|
|
deauthorize:
|
|
description: >
|
|
Deauthorizes the running charging process with the predefined RFID tag of the configuration file.
|
|
|
|
set_energy:
|
|
description: Sets the energy target after which the charging process stops.
|
|
fields:
|
|
energy:
|
|
description: >
|
|
The energy target to stop charging in kWh. Setting 0 disables the limit.
|
|
example: 10.0
|
|
|
|
set_current:
|
|
description: Sets the maximum current for charging processes.
|
|
fields:
|
|
current:
|
|
description: >
|
|
The maximum current used for the charging process in A. Allowed are values between
|
|
6 A and 63 A. Invalid values are discardedand the default is set to 6 A.
|
|
The value is also depending on the DIP-switchsettings and the used cable of the
|
|
charging station
|
|
example: 16
|
|
enable:
|
|
description: >
|
|
Starts a charging process if charging station is authorized.
|
|
|
|
disable:
|
|
description: >
|
|
Stops the charging process if charging station is authorized.
|
|
|
|
set_failsafe:
|
|
description: >
|
|
Set the failsafe mode of the charging station. If all parameters are 0, the failsafe mode will be disabled.
|
|
fields:
|
|
failsafe_timeout:
|
|
description: >
|
|
Timeout in seconds after which the failsafe mode is triggered, if set_current was not executed during this time.
|
|
example: 30
|
|
failsafe_fallback:
|
|
description: >
|
|
Fallback current in A to be set after timeout.
|
|
example: 6
|
|
failsafe_persist:
|
|
description: >
|
|
If failsafe_persist is 0, the failsafe option is only until charging station reboot. If failsafe_persist is 1, the failsafe option will survive a reboot.
|
|
example: 0
|