460 lines
15 KiB
Python
460 lines
15 KiB
Python
"""Support for Honeywell (US) Total Connect Comfort climate systems."""
|
|
import datetime
|
|
import logging
|
|
from typing import Any, Dict, List, Optional
|
|
|
|
import requests
|
|
import somecomfort
|
|
import voluptuous as vol
|
|
|
|
from homeassistant.components.climate import PLATFORM_SCHEMA, ClimateDevice
|
|
from homeassistant.components.climate.const import (
|
|
ATTR_TARGET_TEMP_HIGH,
|
|
ATTR_TARGET_TEMP_LOW,
|
|
CURRENT_HVAC_COOL,
|
|
CURRENT_HVAC_FAN,
|
|
CURRENT_HVAC_HEAT,
|
|
CURRENT_HVAC_IDLE,
|
|
FAN_AUTO,
|
|
FAN_DIFFUSE,
|
|
FAN_ON,
|
|
HVAC_MODE_COOL,
|
|
HVAC_MODE_HEAT,
|
|
HVAC_MODE_HEAT_COOL,
|
|
HVAC_MODE_OFF,
|
|
PRESET_AWAY,
|
|
PRESET_NONE,
|
|
SUPPORT_AUX_HEAT,
|
|
SUPPORT_FAN_MODE,
|
|
SUPPORT_PRESET_MODE,
|
|
SUPPORT_TARGET_HUMIDITY,
|
|
SUPPORT_TARGET_TEMPERATURE,
|
|
SUPPORT_TARGET_TEMPERATURE_RANGE,
|
|
)
|
|
from homeassistant.const import (
|
|
ATTR_TEMPERATURE,
|
|
CONF_PASSWORD,
|
|
CONF_REGION,
|
|
CONF_USERNAME,
|
|
TEMP_CELSIUS,
|
|
TEMP_FAHRENHEIT,
|
|
)
|
|
import homeassistant.helpers.config_validation as cv
|
|
|
|
_LOGGER = logging.getLogger(__name__)
|
|
|
|
ATTR_FAN_ACTION = "fan_action"
|
|
|
|
CONF_COOL_AWAY_TEMPERATURE = "away_cool_temperature"
|
|
CONF_HEAT_AWAY_TEMPERATURE = "away_heat_temperature"
|
|
|
|
DEFAULT_COOL_AWAY_TEMPERATURE = 88
|
|
DEFAULT_HEAT_AWAY_TEMPERATURE = 61
|
|
DEFAULT_REGION = "eu"
|
|
REGIONS = ["eu", "us"]
|
|
|
|
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
|
|
{
|
|
vol.Required(CONF_USERNAME): cv.string,
|
|
vol.Required(CONF_PASSWORD): cv.string,
|
|
vol.Optional(
|
|
CONF_COOL_AWAY_TEMPERATURE, default=DEFAULT_COOL_AWAY_TEMPERATURE
|
|
): vol.Coerce(int),
|
|
vol.Optional(
|
|
CONF_HEAT_AWAY_TEMPERATURE, default=DEFAULT_HEAT_AWAY_TEMPERATURE
|
|
): vol.Coerce(int),
|
|
vol.Optional(CONF_REGION, default=DEFAULT_REGION): vol.In(REGIONS),
|
|
}
|
|
)
|
|
|
|
HVAC_MODE_TO_HW_MODE = {
|
|
"SwitchOffAllowed": {HVAC_MODE_OFF: "off"},
|
|
"SwitchAutoAllowed": {HVAC_MODE_HEAT_COOL: "auto"},
|
|
"SwitchCoolAllowed": {HVAC_MODE_COOL: "cool"},
|
|
"SwitchHeatAllowed": {HVAC_MODE_HEAT: "heat"},
|
|
}
|
|
HW_MODE_TO_HVAC_MODE = {
|
|
"off": HVAC_MODE_OFF,
|
|
"emheat": HVAC_MODE_HEAT,
|
|
"heat": HVAC_MODE_HEAT,
|
|
"cool": HVAC_MODE_COOL,
|
|
"auto": HVAC_MODE_HEAT_COOL,
|
|
}
|
|
HW_MODE_TO_HA_HVAC_ACTION = {
|
|
"off": CURRENT_HVAC_IDLE,
|
|
"fan": CURRENT_HVAC_FAN,
|
|
"heat": CURRENT_HVAC_HEAT,
|
|
"cool": CURRENT_HVAC_COOL,
|
|
}
|
|
FAN_MODE_TO_HW = {
|
|
"fanModeOnAllowed": {FAN_ON: "on"},
|
|
"fanModeAutoAllowed": {FAN_AUTO: "auto"},
|
|
"fanModeCirculateAllowed": {FAN_DIFFUSE: "circulate"},
|
|
}
|
|
HW_FAN_MODE_TO_HA = {
|
|
"on": FAN_ON,
|
|
"auto": FAN_AUTO,
|
|
"circulate": FAN_DIFFUSE,
|
|
"follow schedule": FAN_AUTO,
|
|
}
|
|
|
|
|
|
def setup_platform(hass, config, add_entities, discovery_info=None):
|
|
"""Set up the Honeywell thermostat."""
|
|
username = config.get(CONF_USERNAME)
|
|
password = config.get(CONF_PASSWORD)
|
|
|
|
if config.get(CONF_REGION) == "us":
|
|
try:
|
|
client = somecomfort.SomeComfort(username, password)
|
|
except somecomfort.AuthError:
|
|
_LOGGER.error("Failed to login to honeywell account %s", username)
|
|
return
|
|
except somecomfort.SomeComfortError:
|
|
_LOGGER.error(
|
|
"Failed to initialize the Honeywell client: "
|
|
"Check your configuration (username, password), "
|
|
"or maybe you have exceeded the API rate limit?"
|
|
)
|
|
return
|
|
|
|
dev_id = config.get("thermostat")
|
|
loc_id = config.get("location")
|
|
cool_away_temp = config.get(CONF_COOL_AWAY_TEMPERATURE)
|
|
heat_away_temp = config.get(CONF_HEAT_AWAY_TEMPERATURE)
|
|
|
|
add_entities(
|
|
[
|
|
HoneywellUSThermostat(
|
|
client, device, cool_away_temp, heat_away_temp, username, password
|
|
)
|
|
for location in client.locations_by_id.values()
|
|
for device in location.devices_by_id.values()
|
|
if (
|
|
(not loc_id or location.locationid == loc_id)
|
|
and (not dev_id or device.deviceid == dev_id)
|
|
)
|
|
]
|
|
)
|
|
return
|
|
|
|
_LOGGER.warning(
|
|
"The honeywell component has been deprecated for EU (i.e. non-US) "
|
|
"systems. For EU-based systems, use the evohome component, "
|
|
"see: https://home-assistant.io/integrations/evohome"
|
|
)
|
|
|
|
|
|
class HoneywellUSThermostat(ClimateDevice):
|
|
"""Representation of a Honeywell US Thermostat."""
|
|
|
|
def __init__(
|
|
self, client, device, cool_away_temp, heat_away_temp, username, password
|
|
):
|
|
"""Initialize the thermostat."""
|
|
self._client = client
|
|
self._device = device
|
|
self._cool_away_temp = cool_away_temp
|
|
self._heat_away_temp = heat_away_temp
|
|
self._away = False
|
|
self._username = username
|
|
self._password = password
|
|
|
|
_LOGGER.debug("latestData = %s ", device._data)
|
|
|
|
# not all honeywell HVACs support all modes
|
|
mappings = [v for k, v in HVAC_MODE_TO_HW_MODE.items() if device.raw_ui_data[k]]
|
|
self._hvac_mode_map = {k: v for d in mappings for k, v in d.items()}
|
|
|
|
self._supported_features = (
|
|
SUPPORT_PRESET_MODE
|
|
| SUPPORT_TARGET_TEMPERATURE
|
|
| SUPPORT_TARGET_TEMPERATURE_RANGE
|
|
)
|
|
|
|
if device._data["canControlHumidification"]:
|
|
self._supported_features |= SUPPORT_TARGET_HUMIDITY
|
|
|
|
if device.raw_ui_data["SwitchEmergencyHeatAllowed"]:
|
|
self._supported_features |= SUPPORT_AUX_HEAT
|
|
|
|
if not device._data["hasFan"]:
|
|
return
|
|
|
|
# not all honeywell fans support all modes
|
|
mappings = [v for k, v in FAN_MODE_TO_HW.items() if device.raw_fan_data[k]]
|
|
self._fan_mode_map = {k: v for d in mappings for k, v in d.items()}
|
|
|
|
self._supported_features |= SUPPORT_FAN_MODE
|
|
|
|
@property
|
|
def name(self) -> Optional[str]:
|
|
"""Return the name of the honeywell, if any."""
|
|
return self._device.name
|
|
|
|
@property
|
|
def device_state_attributes(self) -> Dict[str, Any]:
|
|
"""Return the device specific state attributes."""
|
|
data = {}
|
|
data[ATTR_FAN_ACTION] = "running" if self._device.fan_running else "idle"
|
|
if self._device.raw_dr_data:
|
|
data["dr_phase"] = self._device.raw_dr_data.get("Phase")
|
|
return data
|
|
|
|
@property
|
|
def supported_features(self) -> int:
|
|
"""Return the list of supported features."""
|
|
return self._supported_features
|
|
|
|
@property
|
|
def min_temp(self) -> float:
|
|
"""Return the minimum temperature."""
|
|
if self.hvac_mode in [HVAC_MODE_COOL, HVAC_MODE_HEAT_COOL]:
|
|
return self._device.raw_ui_data["CoolLowerSetptLimit"]
|
|
if self.hvac_mode == HVAC_MODE_HEAT:
|
|
return self._device.raw_ui_data["HeatLowerSetptLimit"]
|
|
return None
|
|
|
|
@property
|
|
def max_temp(self) -> float:
|
|
"""Return the maximum temperature."""
|
|
if self.hvac_mode == HVAC_MODE_COOL:
|
|
return self._device.raw_ui_data["CoolUpperSetptLimit"]
|
|
if self.hvac_mode in [HVAC_MODE_HEAT, HVAC_MODE_HEAT_COOL]:
|
|
return self._device.raw_ui_data["HeatUpperSetptLimit"]
|
|
return None
|
|
|
|
@property
|
|
def temperature_unit(self) -> str:
|
|
"""Return the unit of measurement."""
|
|
return TEMP_CELSIUS if self._device.temperature_unit == "C" else TEMP_FAHRENHEIT
|
|
|
|
@property
|
|
def current_humidity(self) -> Optional[int]:
|
|
"""Return the current humidity."""
|
|
return self._device.current_humidity
|
|
|
|
@property
|
|
def hvac_mode(self) -> str:
|
|
"""Return hvac operation ie. heat, cool mode."""
|
|
return HW_MODE_TO_HVAC_MODE[self._device.system_mode]
|
|
|
|
@property
|
|
def hvac_modes(self) -> List[str]:
|
|
"""Return the list of available hvac operation modes."""
|
|
return list(self._hvac_mode_map)
|
|
|
|
@property
|
|
def hvac_action(self) -> Optional[str]:
|
|
"""Return the current running hvac operation if supported."""
|
|
if self.hvac_mode == HVAC_MODE_OFF:
|
|
return None
|
|
return HW_MODE_TO_HA_HVAC_ACTION[self._device.equipment_output_status]
|
|
|
|
@property
|
|
def current_temperature(self) -> Optional[float]:
|
|
"""Return the current temperature."""
|
|
return self._device.current_temperature
|
|
|
|
@property
|
|
def target_temperature(self) -> Optional[float]:
|
|
"""Return the temperature we try to reach."""
|
|
if self.hvac_mode == HVAC_MODE_COOL:
|
|
return self._device.setpoint_cool
|
|
if self.hvac_mode == HVAC_MODE_HEAT:
|
|
return self._device.setpoint_heat
|
|
return None
|
|
|
|
@property
|
|
def target_temperature_high(self) -> Optional[float]:
|
|
"""Return the highbound target temperature we try to reach."""
|
|
if self.hvac_mode == HVAC_MODE_HEAT_COOL:
|
|
return self._device.setpoint_cool
|
|
return None
|
|
|
|
@property
|
|
def target_temperature_low(self) -> Optional[float]:
|
|
"""Return the lowbound target temperature we try to reach."""
|
|
if self.hvac_mode == HVAC_MODE_HEAT_COOL:
|
|
return self._device.setpoint_heat
|
|
return None
|
|
|
|
@property
|
|
def preset_mode(self) -> Optional[str]:
|
|
"""Return the current preset mode, e.g., home, away, temp."""
|
|
return PRESET_AWAY if self._away else None
|
|
|
|
@property
|
|
def preset_modes(self) -> Optional[List[str]]:
|
|
"""Return a list of available preset modes."""
|
|
return [PRESET_NONE, PRESET_AWAY]
|
|
|
|
@property
|
|
def is_aux_heat(self) -> Optional[str]:
|
|
"""Return true if aux heater."""
|
|
return self._device.system_mode == "emheat"
|
|
|
|
@property
|
|
def fan_mode(self) -> Optional[str]:
|
|
"""Return the fan setting."""
|
|
return HW_FAN_MODE_TO_HA[self._device.fan_mode]
|
|
|
|
@property
|
|
def fan_modes(self) -> Optional[List[str]]:
|
|
"""Return the list of available fan modes."""
|
|
return list(self._fan_mode_map)
|
|
|
|
def _set_temperature(self, **kwargs) -> None:
|
|
"""Set new target temperature."""
|
|
temperature = kwargs.get(ATTR_TEMPERATURE)
|
|
if temperature is None:
|
|
return
|
|
try:
|
|
# Get current mode
|
|
mode = self._device.system_mode
|
|
# Set hold if this is not the case
|
|
if getattr(self._device, f"hold_{mode}") is False:
|
|
# Get next period key
|
|
next_period_key = f"{mode.capitalize()}NextPeriod"
|
|
# Get next period raw value
|
|
next_period = self._device.raw_ui_data.get(next_period_key)
|
|
# Get next period time
|
|
hour, minute = divmod(next_period * 15, 60)
|
|
# Set hold time
|
|
setattr(self._device, f"hold_{mode}", datetime.time(hour, minute))
|
|
# Set temperature
|
|
setattr(self._device, f"setpoint_{mode}", temperature)
|
|
except somecomfort.SomeComfortError:
|
|
_LOGGER.error("Temperature %.1f out of range", temperature)
|
|
|
|
def set_temperature(self, **kwargs) -> None:
|
|
"""Set new target temperature."""
|
|
if {HVAC_MODE_COOL, HVAC_MODE_HEAT} & set(self._hvac_mode_map):
|
|
self._set_temperature(**kwargs)
|
|
|
|
try:
|
|
if HVAC_MODE_HEAT_COOL in self._hvac_mode_map:
|
|
temperature = kwargs.get(ATTR_TARGET_TEMP_HIGH)
|
|
if temperature:
|
|
self._device.setpoint_cool = temperature
|
|
temperature = kwargs.get(ATTR_TARGET_TEMP_LOW)
|
|
if temperature:
|
|
self._device.setpoint_heat = temperature
|
|
except somecomfort.SomeComfortError as err:
|
|
_LOGGER.error("Invalid temperature %s: %s", temperature, err)
|
|
|
|
def set_fan_mode(self, fan_mode: str) -> None:
|
|
"""Set new target fan mode."""
|
|
self._device.fan_mode = self._fan_mode_map[fan_mode]
|
|
|
|
def set_hvac_mode(self, hvac_mode: str) -> None:
|
|
"""Set new target hvac mode."""
|
|
self._device.system_mode = self._hvac_mode_map[hvac_mode]
|
|
|
|
def _turn_away_mode_on(self) -> None:
|
|
"""Turn away on.
|
|
|
|
Somecomfort does have a proprietary away mode, but it doesn't really
|
|
work the way it should. For example: If you set a temperature manually
|
|
it doesn't get overwritten when away mode is switched on.
|
|
"""
|
|
self._away = True
|
|
try:
|
|
# Get current mode
|
|
mode = self._device.system_mode
|
|
except somecomfort.SomeComfortError:
|
|
_LOGGER.error("Can not get system mode")
|
|
return
|
|
try:
|
|
|
|
# Set permanent hold
|
|
setattr(self._device, f"hold_{mode}", True)
|
|
# Set temperature
|
|
setattr(
|
|
self._device, f"setpoint_{mode}", getattr(self, f"_{mode}_away_temp")
|
|
)
|
|
except somecomfort.SomeComfortError:
|
|
_LOGGER.error(
|
|
"Temperature %.1f out of range", getattr(self, f"_{mode}_away_temp")
|
|
)
|
|
|
|
def _turn_away_mode_off(self) -> None:
|
|
"""Turn away off."""
|
|
self._away = False
|
|
try:
|
|
# Disabling all hold modes
|
|
self._device.hold_cool = False
|
|
self._device.hold_heat = False
|
|
except somecomfort.SomeComfortError:
|
|
_LOGGER.error("Can not stop hold mode")
|
|
|
|
def set_preset_mode(self, preset_mode: str) -> None:
|
|
"""Set new preset mode."""
|
|
if preset_mode == PRESET_AWAY:
|
|
self._turn_away_mode_on()
|
|
else:
|
|
self._turn_away_mode_off()
|
|
|
|
def turn_aux_heat_on(self) -> None:
|
|
"""Turn auxiliary heater on."""
|
|
self._device.system_mode = "emheat"
|
|
|
|
def turn_aux_heat_off(self) -> None:
|
|
"""Turn auxiliary heater off."""
|
|
if HVAC_MODE_HEAT in self.hvac_modes:
|
|
self.set_hvac_mode(HVAC_MODE_HEAT)
|
|
else:
|
|
self.set_hvac_mode(HVAC_MODE_OFF)
|
|
|
|
def _retry(self) -> bool:
|
|
"""Recreate a new somecomfort client.
|
|
|
|
When we got an error, the best way to be sure that the next query
|
|
will succeed, is to recreate a new somecomfort client.
|
|
"""
|
|
try:
|
|
self._client = somecomfort.SomeComfort(self._username, self._password)
|
|
except somecomfort.AuthError:
|
|
_LOGGER.error("Failed to login to honeywell account %s", self._username)
|
|
return False
|
|
except somecomfort.SomeComfortError as ex:
|
|
_LOGGER.error("Failed to initialize honeywell client: %s", str(ex))
|
|
return False
|
|
|
|
devices = [
|
|
device
|
|
for location in self._client.locations_by_id.values()
|
|
for device in location.devices_by_id.values()
|
|
if device.name == self._device.name
|
|
]
|
|
|
|
if len(devices) != 1:
|
|
_LOGGER.error("Failed to find device %s", self._device.name)
|
|
return False
|
|
|
|
self._device = devices[0]
|
|
return True
|
|
|
|
def update(self) -> None:
|
|
"""Update the state."""
|
|
retries = 3
|
|
while retries > 0:
|
|
try:
|
|
self._device.refresh()
|
|
break
|
|
except (
|
|
somecomfort.client.APIRateLimited,
|
|
OSError,
|
|
requests.exceptions.ReadTimeout,
|
|
) as exp:
|
|
retries -= 1
|
|
if retries == 0:
|
|
raise exp
|
|
if not self._retry():
|
|
raise exp
|
|
_LOGGER.error("SomeComfort update failed, Retrying - Error: %s", exp)
|
|
|
|
_LOGGER.debug(
|
|
"latestData = %s ", self._device._data # pylint: disable=protected-access
|
|
)
|