57 lines
3.6 KiB
JSON
57 lines
3.6 KiB
JSON
{
|
|
"config": {
|
|
"flow_title": "{name} {manufacturer} {model}",
|
|
"step": {
|
|
"user": {
|
|
"description": "Choose a device to set up",
|
|
"data": {
|
|
"address": "[%key:common::config_flow::data::device%]"
|
|
}
|
|
},
|
|
"bluetooth_confirm": {
|
|
"description": "Do you want to set up {name}?"
|
|
},
|
|
"multiple_adapters": {
|
|
"description": "Select a Bluetooth adapter to set up",
|
|
"data": {
|
|
"adapter": "Adapter"
|
|
}
|
|
},
|
|
"single_adapter": {
|
|
"description": "Do you want to set up the Bluetooth adapter {name} {manufacturer} {model}?"
|
|
}
|
|
},
|
|
"abort": {
|
|
"already_configured": "[%key:common::config_flow::abort::already_configured_service%]",
|
|
"no_adapters": "No unconfigured Bluetooth adapters found."
|
|
}
|
|
},
|
|
"options": {
|
|
"step": {
|
|
"init": {
|
|
"data": {
|
|
"passive": "Passive scanning"
|
|
}
|
|
}
|
|
},
|
|
"abort": {
|
|
"remote_adapters_not_supported": "Bluetooth configuration for remote adapters is not supported.",
|
|
"local_adapters_no_passive_support": "Local Bluetooth adapters that do not support passive scanning cannot be configured."
|
|
}
|
|
},
|
|
"issues": {
|
|
"bluetooth_adapter_missing_permissions": {
|
|
"title": "Bluetooth adapter requires additional permissions",
|
|
"description": "The Bluetooth adapter **{adapter}** ({model}) is operating in degraded mode because your container needs additional permissions to fully access Bluetooth hardware.\n\nPlease follow the instructions in our documentation to add the required permissions:\n[Bluetooth permissions for Docker]({docs_url})\n\nAfter adding these permissions, restart your Home Assistant container for the changes to take effect."
|
|
},
|
|
"bluetooth_adapter_passive_mode_usb": {
|
|
"title": "Bluetooth USB adapter requires manual power cycle",
|
|
"description": "The Bluetooth adapter **{adapter}** ({model}) is stuck in passive scanning mode despite requesting active scanning mode. **Automatic recovery was attempted but failed.** This is likely a kernel, firmware, or operating system issue, and the adapter requires a manual power cycle to recover.\n\nIn passive mode, the adapter can only receive advertisements but cannot request additional data from devices, which will affect device discovery and functionality.\n\n**Manual intervention required:**\n1. **Unplug the USB adapter**\n2. Wait 5 seconds\n3. **Plug it back in**\n4. Wait for Home Assistant to detect the adapter\n\nIf the issue persists after power cycling:\n- Try a different USB port\n- Check for kernel/firmware updates\n- Consider using a different Bluetooth adapter"
|
|
},
|
|
"bluetooth_adapter_passive_mode_uart": {
|
|
"title": "Bluetooth adapter requires system power cycle",
|
|
"description": "The Bluetooth adapter **{adapter}** ({model}) is stuck in passive scanning mode despite requesting active scanning mode. **Automatic recovery was attempted but failed.** This is likely a kernel, firmware, or operating system issue, and the system requires a complete power cycle to recover the adapter.\n\nIn passive mode, the adapter can only receive advertisements but cannot request additional data from devices, which will affect device discovery and functionality.\n\n**Manual intervention required:**\n1. **Shut down the system completely** (not just a reboot)\n2. **Remove power** (unplug or turn off at the switch)\n3. Wait 10 seconds\n4. Restore power and boot the system\n\nIf the issue persists after power cycling:\n- Check for kernel/firmware updates\n- The onboard Bluetooth adapter may have hardware issues"
|
|
}
|
|
}
|
|
}
|