{
    "config": {
        "abort": {
            "address_already_configured": "An ElkM1 with this address is already configured",
            "already_configured": "An ElkM1 with this prefix is already configured",
            "already_in_progress": "Configuration flow is already in progress",
            "cannot_connect": "Failed to connect",
            "invalid_auth": "Invalid authentication",
            "unknown": "Unexpected error"
        },
        "error": {
            "cannot_connect": "Failed to connect",
            "invalid_auth": "Invalid authentication",
            "unknown": "Unexpected error"
        },
        "flow_title": "{mac_address} ({host})",
        "step": {
            "discovered_connection": {
                "data": {
                    "password": "Password",
                    "protocol": "Protocol",
                    "temperature_unit": "The temperature unit ElkM1 uses.",
                    "username": "Username"
                },
                "description": "Connect to the discovered system: {mac_address} ({host})",
                "title": "Connect to Elk-M1 Control"
            },
            "manual_connection": {
                "data": {
                    "address": "The IP address or domain or serial port if connecting via serial.",
                    "password": "Password",
                    "prefix": "A unique prefix (leave blank if you only have one ElkM1).",
                    "protocol": "Protocol",
                    "temperature_unit": "The temperature unit ElkM1 uses.",
                    "username": "Username"
                },
                "description": "The address string must be in the form 'address[:port]' for 'secure' and 'non-secure'. Example: '192.168.1.1'. The port is optional and defaults to 2101 for 'non-secure' and 2601 for 'secure'. For the serial protocol, the address must be in the form 'tty[:baud]'. Example: '/dev/ttyS1'. The baud is optional and defaults to 115200.",
                "title": "Connect to Elk-M1 Control"
            },
            "user": {
                "data": {
                    "device": "Device"
                },
                "description": "Choose a discovered system or 'Manual Entry' if no devices have been discovered.",
                "title": "Connect to Elk-M1 Control"
            }
        }
    }
}