{
  "config": {
    "step": {
      "user": {
        "description": "Set up new Intergas InComfort Lan2RF Gateway, some older systems might not need credentials to be set up. For newer devices authentication is required.",
        "data": {
          "host": "[%key:common::config_flow::data::host%]",
          "username": "[%key:common::config_flow::data::username%]",
          "password": "[%key:common::config_flow::data::password%]"
        },
        "data_description": {
          "host": "Hostname or IP-address of the Intergas InComfort Lan2RF Gateway.",
          "username": "The username to log into the gateway. This is `admin` in most cases.",
          "password": "The password to log into the gateway, is printed at the bottom of the Lan2RF Gateway or is `intergas` for some older devices."
        }
      }
    },
    "abort": {
      "already_configured": "[%key:common::config_flow::abort::already_configured_service%]",
      "auth_error": "Invalid credentials.",
      "no_heaters": "No heaters found.",
      "not_found": "No Lan2RF gateway found.",
      "timeout_error": "Time out when connection to Lan2RF gateway.",
      "unknown": "Unknown error when connection to Lan2RF gateway."
    },
    "error": {
      "auth_error": "[%key:component::incomfort::config::abort::auth_error%]",
      "no_heaters": "[%key:component::incomfort::config::abort::no_heaters%]",
      "not_found": "[%key:component::incomfort::config::abort::not_found%]",
      "timeout_error": "[%key:component::incomfort::config::abort::timeout_error%]",
      "unknown": "[%key:component::incomfort::config::abort::unknown%]"
    }
  },
  "issues": {
    "deprecated_yaml_import_issue_unknown": {
      "title": "YAML import failed with unknown error",
      "description": "Configuring {integration_title} using YAML is being removed but there was an unknown error while importing your existing configuration.\nSetup will not proceed.\n\nVerify that your {integration_title} is operating correctly and restart Home Assistant to attempt the import again.\n\nAlternatively, you may remove the `{domain}` configuration from your configuration.yaml entirely, restart Home Assistant, and add the {integration_title} integration manually."
    },
    "deprecated_yaml_import_issue_auth_error": {
      "title": "YAML import failed due to an authentication error",
      "description": "Configuring {integration_title} using YAML is being removed but there was an authentication error while importing your existing configuration.\nSetup will not proceed.\n\nVerify that your {integration_title} is operating correctly and restart Home Assistant to attempt the import again.\n\nAlternatively, you may remove the `{domain}` configuration from your configuration.yaml entirely, restart Home Assistant, and add the {integration_title} integration manually."
    },
    "deprecated_yaml_import_issue_no_heaters": {
      "title": "YAML import failed because no heaters were found",
      "description": "Configuring {integration_title} using YAML is being removed but no heaters were found while importing your existing configuration.\nSetup will not proceed.\n\nVerify that your {integration_title} is operating correctly and restart Home Assistant to attempt the import again.\n\nAlternatively, you may remove the `{domain}` configuration from your configuration.yaml entirely, restart Home Assistant, and add the {integration_title} integration manually."
    },
    "deprecated_yaml_import_issue_not_found": {
      "title": "YAML import failed because no gateway was found",
      "description": "Configuring {integration_title} using YAML is being removed but no Lan2RF gateway was found while importing your existing configuration.\nSetup will not proceed.\n\nVerify that your {integration_title} is operating correctly and restart Home Assistant to attempt the import again.\n\nAlternatively, you may remove the `{domain}` configuration from your configuration.yaml entirely, restart Home Assistant, and add the {integration_title} integration manually."
    },
    "deprecated_yaml_import_issue_timeout_error": {
      "title": "YAML import failed because of timeout issues",
      "description": "Configuring {integration_title} using YAML is being removed but there was a timeout while connecting to your {integration_title} while importing your existing configuration.\nSetup will not proceed.\n\nVerify that your {integration_title} is operating correctly and restart Home Assistant to attempt the import again.\n\nAlternatively, you may remove the `{domain}` configuration from your configuration.yaml entirely, restart Home Assistant, and add the {integration_title} integration manually."
    }
  },
  "entity": {
    "binary_sensor": {
      "fault": {
        "name": "Fault",
        "state_attributes": {
          "fault_code": {
            "state": {
              "none": "None"
            }
          }
        }
      },
      "is_burning": {
        "name": "Burner"
      },
      "is_pumping": {
        "name": "Pump"
      },
      "is_tapping": {
        "name": "Hot water tap"
      }
    },
    "sensor": {
      "tap_temperature": {
        "name": "Tap temperature"
      }
    },
    "water_heater": {
      "boiler": {
        "state": {
          "unknown": "Unknown",
          "opentherm": "OpenTherm",
          "boiler_ext": "Boiler external",
          "frost": "Frost protection",
          "central_heating_rf": "Central heating rf",
          "tapwater_int": "Tap water internal",
          "sensor_test": "Sensor test",
          "central_heating": "Central heating",
          "standby": "Stand-by",
          "postrun_boyler": "Post run boiler",
          "service": "Service",
          "tapwater": "Tap water",
          "postrun_ch": "Post run central heating",
          "boiler_int": "Boiler internal",
          "buffer": "Buffer",
          "sensor_fault_after_self_check_e0": "Sensor fault after self check",
          "cv_temperature_too_high_e1": "Temperature too high",
          "s1_and_s2_interchanged_e2": "S1 and S2 interchanged",
          "no_flame_signal_e4": "No flame signal",
          "poor_flame_signal_e5": "Poor flame signal",
          "flame_detection_fault_e6": "Flame detection fault",
          "incorrect_fan_speed_e8": "Incorrect fan speed",
          "sensor_fault_s1_e10": "Sensor fault S1",
          "sensor_fault_s1_e11": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s1_e10%]",
          "sensor_fault_s1_e12": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s1_e10%]",
          "sensor_fault_s1_e13": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s1_e10%]",
          "sensor_fault_s1_e14": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s1_e10%]",
          "sensor_fault_s2_e20": "Sensor fault S2",
          "sensor_fault_s2_e21": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s2_e20%]",
          "sensor_fault_s2_e22": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s2_e20%]",
          "sensor_fault_s2_e23": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s2_e20%]",
          "sensor_fault_s2_e24": "[%key:component::incomfort::entity::water_heater::boiler::state::sensor_fault_s2_e20%]",
          "shortcut_outside_sensor_temperature_e27": "Shortcut outside sensor temperature",
          "gas_valve_relay_faulty_e29": "Gas valve relay faulty",
          "gas_valve_relay_faulty_e30": "[%key:component::incomfort::entity::water_heater::boiler::state::gas_valve_relay_faulty_e29%]"
        }
      }
    }
  }
}