# Describes the format for available services for KEBA charging staitons

request_data:
  description: >
    Request new data from the charging station.

authorize:
  description: >
    Authorizes a charging process with the predefined RFID tag of the configuration file.

deauthorize:
  description: >
    Deauthorizes the running charging process with the predefined RFID tag of the configuration file.

set_energy:
  description: Sets the energy target after which the charging process stops.
  fields:
    energy:
      description: >
        The energy target to stop charging in kWh. Setting 0 disables the limit.
      example: 10.0

set_current:
  description: Sets the maximum current for charging processes.
  fields:
    current:
      description: >
        The maximum current used for the charging process in A. Allowed are values between
        6 A and 63 A. Invalid values are discardedand the default is set to 6 A.
        The value is also depending on the DIP-switchsettings and the used cable of the
        charging station
      example: 16
enable:
  description: >
    Starts a charging process if charging station is authorized.

disable:
  description: >
    Stops the charging process if charging station is authorized.

set_failsafe:
  description: >
    Set the failsafe mode of the charging station. If all parameters are 0, the failsafe mode will be disabled.
  fields:
    failsafe_timeout:
      description: >
        Timeout in seconds after which the failsafe mode is triggered, if set_current was not executed during this time.
      example: 30
    failsafe_fallback:
      description: >
        Fallback current in A to be set after timeout.
      example: 6
    failsafe_persist:
      description: >
        If failsafe_persist is 0, the failsafe option is only until charging station reboot. If failsafe_persist is 1, the failsafe option will survive a reboot.
      example: 0