sync_clock:
  name: Sync clock
  description: Sync the velbus modules clock to the Home Assistant clock, this is the same as the 'sync clock' from VelbusLink
  fields:
    interface:
      name: Interface
      description: The velbus interface to send the command to, this will be the same value as used during configuration
      required: true
      example: "192.168.1.5:27015"
      default: ''
      selector:
        text:

scan:
  name: Scan
  description: Scan the velbus modules, this will be need if you see unknown module warnings in the logs, or when you added new modules
  fields:
    interface:
      name: Interface
      description: The velbus interface to send the command to, this will be the same value as used during configuration
      required: true
      example: "192.168.1.5:27015"
      default: ''
      selector:
        text:

set_memo_text:
  name: Set memo text
  description: >
    Set the memo text to the display of modules like VMBGPO, VMBGPOD
    Be sure the page(s) of the module is configured to display the memo text.
  fields:
    interface:
      name: Interface
      description: The velbus interface to send the command to, this will be the same value as used during configuration
      required: true
      example: "192.168.1.5:27015"
      default: ''
      selector:
        text:
    address:
      name: Address
      description: >
        The module address in decimal format.
        The decimal addresses are displayed in front of the modules listed at the integration page.
      required: true
      selector:
        number:
          min: 1
          max: 254
    memo_text:
      name: Memo text
      description: >
        The actual text to be displayed.
        Text is limited to 64 characters.
      example: "Do not forget trash"
      default: ''
      selector:
        text: