{
  "config": {
    "step": {
      "type": {
        "description": "Please enter the connection type we should use for your KNX connection. \n AUTOMATIC - The integration takes care of the connectivity to your KNX Bus by performing a gateway scan. \n TUNNELING - The integration will connect to your KNX bus via tunneling. \n ROUTING - The integration will connect to your KNX bus via routing.",
        "data": {
          "connection_type": "KNX Connection Type"
        }
      },
      "tunnel": {
        "description": "Please select a gateway from the list.",
        "data": {
          "gateway": "KNX Tunnel Connection"
        }
      },
      "manual_tunnel": {
        "description": "Please enter the connection information of your tunneling device.",
        "data": {
          "port": "[%key:common::config_flow::data::port%]",
          "host": "[%key:common::config_flow::data::host%]",
          "individual_address": "Individual address for the connection",
          "route_back": "Route Back / NAT Mode",
          "local_ip": "Local IP of Home Assistant (leave empty for automatic detection)"
        }
      },
      "routing": {
        "description": "Please configure the routing options.",
        "data": {
          "individual_address": "Individual address for the routing connection",
          "multicast_group": "The multicast group used for routing",
          "multicast_port": "The multicast port used for routing",
          "local_ip": "Local IP of Home Assistant (leave empty for automatic detection)"
        }
      }
    },
    "abort": {
      "already_configured": "[%key:common::config_flow::abort::already_configured_service%]",
      "single_instance_allowed": "[%key:common::config_flow::abort::single_instance_allowed%]"
    },
    "error": {
      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]"
    }
  },
  "options": {
    "step": {
      "init": {
        "data": {
          "connection_type": "KNX Connection Type",
          "individual_address": "Default individual address",
          "multicast_group": "Multicast group used for routing and discovery",
          "multicast_port": "Multicast port used for routing and discovery",
          "local_ip": "Local IP of Home Assistant (use 0.0.0.0 for automatic detection)",
          "state_updater": "Globally enable reading states from the KNX Bus",
          "rate_limit": "Maximum outgoing telegrams per second"
        }
      },
      "tunnel": {
        "data": {
          "port": "[%key:common::config_flow::data::port%]",
          "host": "[%key:common::config_flow::data::host%]",
          "route_back": "Route Back / NAT Mode"
        }
      }
    }
  }
}