"""Support for Modbus.""" from __future__ import annotations import logging import voluptuous as vol from homeassistant.components.binary_sensor import ( DEVICE_CLASSES_SCHEMA as BINARY_SENSOR_DEVICE_CLASSES_SCHEMA, ) from homeassistant.components.cover import ( DEVICE_CLASSES_SCHEMA as COVER_DEVICE_CLASSES_SCHEMA, ) from homeassistant.components.sensor import ( DEVICE_CLASSES_SCHEMA as SENSOR_DEVICE_CLASSES_SCHEMA, ) from homeassistant.components.switch import ( DEVICE_CLASSES_SCHEMA as SWITCH_DEVICE_CLASSES_SCHEMA, ) from homeassistant.const import ( CONF_ADDRESS, CONF_BINARY_SENSORS, CONF_COMMAND_OFF, CONF_COMMAND_ON, CONF_COUNT, CONF_COVERS, CONF_DELAY, CONF_DEVICE_CLASS, CONF_HOST, CONF_LIGHTS, CONF_METHOD, CONF_NAME, CONF_OFFSET, CONF_PORT, CONF_SCAN_INTERVAL, CONF_SENSORS, CONF_SLAVE, CONF_STRUCTURE, CONF_SWITCHES, CONF_TEMPERATURE_UNIT, CONF_TIMEOUT, CONF_TYPE, CONF_UNIT_OF_MEASUREMENT, ) import homeassistant.helpers.config_validation as cv from .const import ( ATTR_ADDRESS, ATTR_HUB, ATTR_STATE, ATTR_UNIT, ATTR_VALUE, CALL_TYPE_COIL, CALL_TYPE_DISCRETE, CALL_TYPE_REGISTER_HOLDING, CALL_TYPE_REGISTER_INPUT, CALL_TYPE_X_COILS, CALL_TYPE_X_REGISTER_HOLDINGS, CONF_BAUDRATE, CONF_BYTESIZE, CONF_CLIMATES, CONF_CLOSE_COMM_ON_ERROR, CONF_DATA_COUNT, CONF_DATA_TYPE, CONF_FANS, CONF_INPUT_TYPE, CONF_MAX_TEMP, CONF_MIN_TEMP, CONF_MSG_WAIT, CONF_PARITY, CONF_PRECISION, CONF_RETRIES, CONF_RETRY_ON_EMPTY, CONF_REVERSE_ORDER, CONF_RTUOVERTCP, CONF_SCALE, CONF_SERIAL, CONF_STATE_CLOSED, CONF_STATE_CLOSING, CONF_STATE_OFF, CONF_STATE_ON, CONF_STATE_OPEN, CONF_STATE_OPENING, CONF_STATUS_REGISTER, CONF_STATUS_REGISTER_TYPE, CONF_STEP, CONF_STOPBITS, CONF_SWAP, CONF_SWAP_BYTE, CONF_SWAP_NONE, CONF_SWAP_WORD, CONF_SWAP_WORD_BYTE, CONF_TARGET_TEMP, CONF_TCP, CONF_UDP, CONF_VERIFY, CONF_WRITE_TYPE, DATA_TYPE_CUSTOM, DATA_TYPE_FLOAT, DATA_TYPE_FLOAT16, DATA_TYPE_FLOAT32, DATA_TYPE_FLOAT64, DATA_TYPE_INT, DATA_TYPE_INT16, DATA_TYPE_INT32, DATA_TYPE_INT64, DATA_TYPE_STRING, DATA_TYPE_UINT, DATA_TYPE_UINT16, DATA_TYPE_UINT32, DATA_TYPE_UINT64, DEFAULT_HUB, DEFAULT_SCAN_INTERVAL, DEFAULT_TEMP_UNIT, MODBUS_DOMAIN as DOMAIN, ) from .modbus import async_modbus_setup from .validators import number_validator, scan_interval_validator, struct_validator _LOGGER = logging.getLogger(__name__) BASE_SCHEMA = vol.Schema({vol.Optional(CONF_NAME, default=DEFAULT_HUB): cv.string}) BASE_COMPONENT_SCHEMA = vol.Schema( { vol.Required(CONF_NAME): cv.string, vol.Required(CONF_ADDRESS): cv.positive_int, vol.Optional(CONF_SLAVE): cv.positive_int, vol.Optional( CONF_SCAN_INTERVAL, default=DEFAULT_SCAN_INTERVAL ): cv.positive_int, } ) BASE_STRUCT_SCHEMA = BASE_COMPONENT_SCHEMA.extend( { vol.Optional(CONF_INPUT_TYPE, default=CALL_TYPE_REGISTER_HOLDING): vol.In( [ CALL_TYPE_REGISTER_HOLDING, CALL_TYPE_REGISTER_INPUT, ] ), vol.Optional(CONF_COUNT): cv.positive_int, vol.Optional(CONF_DATA_TYPE, default=DATA_TYPE_INT): vol.In( [ DATA_TYPE_INT16, DATA_TYPE_INT32, DATA_TYPE_INT64, DATA_TYPE_UINT16, DATA_TYPE_UINT32, DATA_TYPE_UINT64, DATA_TYPE_FLOAT16, DATA_TYPE_FLOAT32, DATA_TYPE_FLOAT64, DATA_TYPE_STRING, DATA_TYPE_INT, DATA_TYPE_UINT, DATA_TYPE_FLOAT, DATA_TYPE_STRING, DATA_TYPE_CUSTOM, ] ), vol.Optional(CONF_STRUCTURE): cv.string, vol.Optional(CONF_SCALE, default=1): number_validator, vol.Optional(CONF_OFFSET, default=0): number_validator, vol.Optional(CONF_PRECISION, default=0): cv.positive_int, vol.Optional(CONF_SWAP, default=CONF_SWAP_NONE): vol.In( [ CONF_SWAP_NONE, CONF_SWAP_BYTE, CONF_SWAP_WORD, CONF_SWAP_WORD_BYTE, ] ), } ) BASE_SWITCH_SCHEMA = BASE_COMPONENT_SCHEMA.extend( { vol.Optional(CONF_WRITE_TYPE, default=CALL_TYPE_REGISTER_HOLDING): vol.In( [ CALL_TYPE_REGISTER_HOLDING, CALL_TYPE_COIL, CALL_TYPE_X_COILS, CALL_TYPE_X_REGISTER_HOLDINGS, ] ), vol.Optional(CONF_COMMAND_OFF, default=0x00): cv.positive_int, vol.Optional(CONF_COMMAND_ON, default=0x01): cv.positive_int, vol.Optional(CONF_VERIFY): vol.Maybe( { vol.Optional(CONF_ADDRESS): cv.positive_int, vol.Optional(CONF_INPUT_TYPE): vol.In( [ CALL_TYPE_REGISTER_HOLDING, CALL_TYPE_DISCRETE, CALL_TYPE_REGISTER_INPUT, CALL_TYPE_COIL, CALL_TYPE_X_COILS, CALL_TYPE_X_REGISTER_HOLDINGS, ] ), vol.Optional(CONF_STATE_OFF): cv.positive_int, vol.Optional(CONF_STATE_ON): cv.positive_int, vol.Optional(CONF_DELAY, default=0): cv.positive_int, } ), } ) CLIMATE_SCHEMA = vol.All( cv.deprecated(CONF_DATA_COUNT, replacement_key=CONF_COUNT), BASE_STRUCT_SCHEMA.extend( { vol.Required(CONF_TARGET_TEMP): cv.positive_int, vol.Optional(CONF_MAX_TEMP, default=35): cv.positive_int, vol.Optional(CONF_MIN_TEMP, default=5): cv.positive_int, vol.Optional(CONF_STEP, default=0.5): vol.Coerce(float), vol.Optional(CONF_TEMPERATURE_UNIT, default=DEFAULT_TEMP_UNIT): cv.string, } ), ) COVERS_SCHEMA = BASE_COMPONENT_SCHEMA.extend( { vol.Optional(CONF_INPUT_TYPE, default=CALL_TYPE_REGISTER_HOLDING,): vol.In( [ CALL_TYPE_REGISTER_HOLDING, CALL_TYPE_COIL, ] ), vol.Optional(CONF_DEVICE_CLASS): COVER_DEVICE_CLASSES_SCHEMA, vol.Optional(CONF_STATE_CLOSED, default=0): cv.positive_int, vol.Optional(CONF_STATE_CLOSING, default=3): cv.positive_int, vol.Optional(CONF_STATE_OPEN, default=1): cv.positive_int, vol.Optional(CONF_STATE_OPENING, default=2): cv.positive_int, vol.Optional(CONF_STATUS_REGISTER): cv.positive_int, vol.Optional( CONF_STATUS_REGISTER_TYPE, default=CALL_TYPE_REGISTER_HOLDING, ): vol.In([CALL_TYPE_REGISTER_HOLDING, CALL_TYPE_REGISTER_INPUT]), } ) SWITCH_SCHEMA = BASE_SWITCH_SCHEMA.extend( { vol.Optional(CONF_DEVICE_CLASS): SWITCH_DEVICE_CLASSES_SCHEMA, } ) LIGHT_SCHEMA = BASE_SWITCH_SCHEMA.extend({}) FAN_SCHEMA = BASE_SWITCH_SCHEMA.extend({}) SENSOR_SCHEMA = vol.All( cv.deprecated(CONF_REVERSE_ORDER), BASE_STRUCT_SCHEMA.extend( { vol.Optional(CONF_DEVICE_CLASS): SENSOR_DEVICE_CLASSES_SCHEMA, vol.Optional(CONF_UNIT_OF_MEASUREMENT): cv.string, vol.Optional(CONF_REVERSE_ORDER): cv.boolean, } ), ) BINARY_SENSOR_SCHEMA = BASE_COMPONENT_SCHEMA.extend( { vol.Optional(CONF_DEVICE_CLASS): BINARY_SENSOR_DEVICE_CLASSES_SCHEMA, vol.Optional(CONF_INPUT_TYPE, default=CALL_TYPE_COIL): vol.In( [CALL_TYPE_COIL, CALL_TYPE_DISCRETE] ), } ) MODBUS_SCHEMA = vol.Schema( { vol.Optional(CONF_NAME, default=DEFAULT_HUB): cv.string, vol.Optional(CONF_TIMEOUT, default=3): cv.socket_timeout, vol.Optional(CONF_CLOSE_COMM_ON_ERROR, default=True): cv.boolean, vol.Optional(CONF_DELAY, default=0): cv.positive_int, vol.Optional(CONF_RETRIES, default=3): cv.positive_int, vol.Optional(CONF_RETRY_ON_EMPTY, default=False): cv.boolean, vol.Optional(CONF_MSG_WAIT): cv.positive_int, vol.Optional(CONF_BINARY_SENSORS): vol.All( cv.ensure_list, [BINARY_SENSOR_SCHEMA] ), vol.Optional(CONF_CLIMATES): vol.All( cv.ensure_list, [vol.All(CLIMATE_SCHEMA, struct_validator)] ), vol.Optional(CONF_COVERS): vol.All(cv.ensure_list, [COVERS_SCHEMA]), vol.Optional(CONF_LIGHTS): vol.All(cv.ensure_list, [LIGHT_SCHEMA]), vol.Optional(CONF_SENSORS): vol.All( cv.ensure_list, [vol.All(SENSOR_SCHEMA, struct_validator)] ), vol.Optional(CONF_SWITCHES): vol.All(cv.ensure_list, [SWITCH_SCHEMA]), vol.Optional(CONF_FANS): vol.All(cv.ensure_list, [FAN_SCHEMA]), } ) SERIAL_SCHEMA = MODBUS_SCHEMA.extend( { vol.Required(CONF_TYPE): CONF_SERIAL, vol.Required(CONF_BAUDRATE): cv.positive_int, vol.Required(CONF_BYTESIZE): vol.Any(5, 6, 7, 8), vol.Required(CONF_METHOD): vol.Any("rtu", "ascii"), vol.Required(CONF_PORT): cv.string, vol.Required(CONF_PARITY): vol.Any("E", "O", "N"), vol.Required(CONF_STOPBITS): vol.Any(1, 2), } ) ETHERNET_SCHEMA = MODBUS_SCHEMA.extend( { vol.Required(CONF_HOST): cv.string, vol.Required(CONF_PORT): cv.port, vol.Required(CONF_TYPE): vol.Any(CONF_TCP, CONF_UDP, CONF_RTUOVERTCP), } ) CONFIG_SCHEMA = vol.Schema( { DOMAIN: vol.All( cv.ensure_list, scan_interval_validator, [ vol.Any(SERIAL_SCHEMA, ETHERNET_SCHEMA), ], ), }, extra=vol.ALLOW_EXTRA, ) SERVICE_WRITE_REGISTER_SCHEMA = vol.Schema( { vol.Optional(ATTR_HUB, default=DEFAULT_HUB): cv.string, vol.Required(ATTR_UNIT): cv.positive_int, vol.Required(ATTR_ADDRESS): cv.positive_int, vol.Required(ATTR_VALUE): vol.Any( cv.positive_int, vol.All(cv.ensure_list, [cv.positive_int]) ), } ) SERVICE_WRITE_COIL_SCHEMA = vol.Schema( { vol.Optional(ATTR_HUB, default=DEFAULT_HUB): cv.string, vol.Required(ATTR_UNIT): cv.positive_int, vol.Required(ATTR_ADDRESS): cv.positive_int, vol.Required(ATTR_STATE): vol.Any( cv.boolean, vol.All(cv.ensure_list, [cv.boolean]) ), } ) async def async_setup(hass, config): """Set up Modbus component.""" return await async_modbus_setup( hass, config, SERVICE_WRITE_REGISTER_SCHEMA, SERVICE_WRITE_COIL_SCHEMA )