{ "config": { "flow_title": "{name}", "step": { "choose_serial_port": { "title": "Select a Serial Port", "data": { "path": "Serial Device Path" }, "description": "Select the serial port for your Zigbee radio" }, "confirm": { "description": "Do you want to set up {name}?" }, "confirm_hardware": { "description": "Do you want to set up {name}?" }, "manual_pick_radio_type": { "data": { "radio_type": "Radio Type" }, "title": "[%key:component::zha::config::step::manual_pick_radio_type::data::radio_type%]", "description": "Pick your Zigbee radio type" }, "manual_port_config": { "title": "Serial Port Settings", "description": "Enter the serial port settings", "data": { "path": "Serial device path", "baudrate": "Port speed", "flow_control": "Data flow control" } }, "verify_radio": { "title": "Radio is not recommended", "description": "The radio you are using ({name}) is not recommended and support for it may be removed in the future. Please see the Zigbee Home Automation integration's documentation for [a list of recommended adapters]({docs_recommended_adapters_url})." }, "choose_formation_strategy": { "title": "Network Formation", "description": "Choose the network settings for your radio.", "menu_options": { "form_new_network": "Erase network settings and create a new network", "form_initial_network": "Create a network", "reuse_settings": "Keep radio network settings", "choose_automatic_backup": "Restore an automatic backup", "upload_manual_backup": "Upload a manual backup" } }, "choose_automatic_backup": { "title": "Restore Automatic Backup", "description": "Restore your network settings from an automatic backup", "data": { "choose_automatic_backup": "Choose an automatic backup" } }, "upload_manual_backup": { "title": "Upload a Manual Backup", "description": "Restore your network settings from an uploaded backup JSON file. You can download one from a different ZHA installation from **Network Settings**, or use a Zigbee2MQTT `coordinator_backup.json` file.", "data": { "uploaded_backup_file": "Upload a file" } }, "maybe_confirm_ezsp_restore": { "title": "Overwrite Radio IEEE Address", "description": "Your backup has a different IEEE address than your radio. For your network to function properly, the IEEE address of your radio should also be changed.\n\nThis is a permanent operation.", "data": { "overwrite_coordinator_ieee": "Permanently replace the radio IEEE address" } } }, "error": { "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]", "invalid_backup_json": "Invalid backup JSON" }, "abort": { "single_instance_allowed": "[%key:common::config_flow::abort::single_instance_allowed%]", "not_zha_device": "This device is not a zha device", "usb_probe_failed": "Failed to probe the usb device", "wrong_firmware_installed": "Your device is running the wrong firmware and cannot be used with ZHA until the correct firmware is installed. [A repair has been created]({repair_url}) with more information and instructions for how to fix this.", "invalid_zeroconf_data": "The coordinator has invalid zeroconf service info and cannot be identified by ZHA" } }, "options": { "flow_title": "[%key:component::zha::config::flow_title%]", "step": { "init": { "title": "Reconfigure ZHA", "description": "ZHA will be stopped. Do you wish to continue?" }, "prompt_migrate_or_reconfigure": { "title": "Migrate or re-configure", "description": "Are you migrating to a new radio or re-configuring the current radio?", "menu_options": { "intent_migrate": "Migrate to a new radio", "intent_reconfigure": "Re-configure the current radio" } }, "intent_migrate": { "title": "[%key:component::zha::options::step::prompt_migrate_or_reconfigure::menu_options::intent_migrate%]", "description": "Before plugging in your new radio, your old radio needs to be reset. An automatic backup will be performed. If you are using a combined Z-Wave and Zigbee adapter like the HUSBZB-1, this will only reset the Zigbee portion.\n\n*Note: if you are migrating from a **ConBee/RaspBee**, make sure it is running firmware `0x26720700` or newer! Otherwise, some devices may not be controllable after migrating until they are power cycled.*\n\nDo you wish to continue?" }, "instruct_unplug": { "title": "Unplug your old radio", "description": "Your old radio has been reset. If the hardware is no longer needed, you can now unplug it.\n\nYou can now plug in your new radio." }, "choose_serial_port": { "title": "[%key:component::zha::config::step::choose_serial_port::title%]", "data": { "path": "[%key:component::zha::config::step::choose_serial_port::data::path%]" }, "description": "[%key:component::zha::config::step::choose_serial_port::description%]" }, "manual_pick_radio_type": { "data": { "radio_type": "[%key:component::zha::config::step::manual_pick_radio_type::data::radio_type%]" }, "title": "[%key:component::zha::config::step::manual_pick_radio_type::data::radio_type%]", "description": "[%key:component::zha::config::step::manual_pick_radio_type::description%]" }, "manual_port_config": { "title": "[%key:component::zha::config::step::manual_port_config::title%]", "description": "[%key:component::zha::config::step::manual_port_config::description%]", "data": { "path": "[%key:component::zha::config::step::manual_port_config::data::path%]", "baudrate": "[%key:component::zha::config::step::manual_port_config::data::baudrate%]", "flow_control": "[%key:component::zha::config::step::manual_port_config::data::flow_control%]" } }, "verify_radio": { "title": "[%key:component::zha::config::step::verify_radio::title%]", "description": "[%key:component::zha::config::step::verify_radio::description%]" }, "choose_formation_strategy": { "title": "[%key:component::zha::config::step::choose_formation_strategy::title%]", "description": "[%key:component::zha::config::step::choose_formation_strategy::description%]", "menu_options": { "form_new_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::form_new_network%]", "form_initial_network": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::form_initial_network%]", "reuse_settings": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::reuse_settings%]", "choose_automatic_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::choose_automatic_backup%]", "upload_manual_backup": "[%key:component::zha::config::step::choose_formation_strategy::menu_options::upload_manual_backup%]" } }, "choose_automatic_backup": { "title": "[%key:component::zha::config::step::choose_automatic_backup::title%]", "description": "[%key:component::zha::config::step::choose_automatic_backup::description%]", "data": { "choose_automatic_backup": "[%key:component::zha::config::step::choose_automatic_backup::data::choose_automatic_backup%]" } }, "upload_manual_backup": { "title": "[%key:component::zha::config::step::upload_manual_backup::title%]", "description": "[%key:component::zha::config::step::upload_manual_backup::description%]", "data": { "uploaded_backup_file": "[%key:component::zha::config::step::upload_manual_backup::data::uploaded_backup_file%]" } }, "maybe_confirm_ezsp_restore": { "title": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::title%]", "description": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::description%]", "data": { "overwrite_coordinator_ieee": "[%key:component::zha::config::step::maybe_confirm_ezsp_restore::data::overwrite_coordinator_ieee%]" } } }, "error": { "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]", "invalid_backup_json": "[%key:component::zha::config::error::invalid_backup_json%]" }, "abort": { "single_instance_allowed": "[%key:common::config_flow::abort::single_instance_allowed%]", "not_zha_device": "[%key:component::zha::config::abort::not_zha_device%]", "usb_probe_failed": "[%key:component::zha::config::abort::usb_probe_failed%]", "wrong_firmware_installed": "[%key:component::zha::config::abort::wrong_firmware_installed%]" } }, "config_panel": { "zha_options": { "title": "Global Options", "enhanced_light_transition": "Enable enhanced light color/temperature transition from an off-state", "light_transitioning_flag": "Enable enhanced brightness slider during light transition", "group_members_assume_state": "Group members assume state of group", "enable_identify_on_join": "Enable identify effect when devices join the network", "default_light_transition": "Default light transition time (seconds)", "consider_unavailable_mains": "Consider mains powered devices unavailable after (seconds)", "enable_mains_startup_polling": "Refresh state for mains powered devices on startup", "consider_unavailable_battery": "Consider battery powered devices unavailable after (seconds)" }, "zha_alarm_options": { "title": "Alarm Control Panel Options", "alarm_master_code": "Master code for the alarm control panel(s)", "alarm_failed_tries": "The number of consecutive failed code entries to trigger an alarm", "alarm_arm_requires_code": "Code required for arming actions" } }, "device_automation": { "action_type": { "squawk": "Squawk", "warn": "Warn", "issue_all_led_effect": "Issue effect for all LEDs", "issue_individual_led_effect": "Issue effect for individual LED" }, "trigger_type": { "remote_button_short_press": "\"{subtype}\" pressed", "remote_button_short_release": "\"{subtype}\" released", "remote_button_long_press": "\"{subtype}\" continuously pressed", "remote_button_long_release": "\"{subtype}\" released after long press", "remote_button_double_press": "\"{subtype}\" double clicked", "remote_button_triple_press": "\"{subtype}\" triple clicked", "remote_button_quadruple_press": "\"{subtype}\" quadruple clicked", "remote_button_quintuple_press": "\"{subtype}\" quintuple clicked", "remote_button_alt_short_press": "\"{subtype}\" pressed (Alternate mode)", "remote_button_alt_short_release": "\"{subtype}\" released (Alternate mode)", "remote_button_alt_long_press": "\"{subtype}\" continuously pressed (Alternate mode)", "remote_button_alt_long_release": "\"{subtype}\" released after long press (Alternate mode)", "remote_button_alt_double_press": "\"{subtype}\" double clicked (Alternate mode)", "remote_button_alt_triple_press": "\"{subtype}\" triple clicked (Alternate mode)", "remote_button_alt_quadruple_press": "\"{subtype}\" quadruple clicked (Alternate mode)", "remote_button_alt_quintuple_press": "\"{subtype}\" quintuple clicked (Alternate mode)", "device_rotated": "Device rotated \"{subtype}\"", "device_shaken": "Device shaken", "device_slid": "Device slid \"{subtype}\"", "device_tilted": "Device tilted", "device_knocked": "Device knocked \"{subtype}\"", "device_dropped": "Device dropped", "device_flipped": "Device flipped \"{subtype}\"", "device_offline": "Device offline" }, "trigger_subtype": { "turn_on": "[%key:common::action::turn_on%]", "turn_off": "[%key:common::action::turn_off%]", "dim_up": "Dim up", "dim_down": "Dim down", "left": "Left", "right": "Right", "open": "[%key:common::action::open%]", "close": "[%key:common::action::close%]", "both_buttons": "Both buttons", "button": "Button", "button_1": "First button", "button_2": "Second button", "button_3": "Third button", "button_4": "Fourth button", "button_5": "Fifth button", "button_6": "Sixth button", "face_any": "With any/specified face(s) activated", "face_1": "With face 1 activated", "face_2": "With face 2 activated", "face_3": "With face 3 activated", "face_4": "With face 4 activated", "face_5": "With face 5 activated", "face_6": "With face 6 activated" }, "extra_fields": { "color": "Color hue", "duration": "Duration in seconds", "effect_type": "Effect type", "led_number": "LED number", "level": "Brightness (%)" } }, "services": { "permit": { "name": "Permit", "description": "Allows nodes to join the Zigbee network.", "fields": { "duration": { "name": "Duration", "description": "Time to permit joins." }, "ieee": { "name": "IEEE", "description": "IEEE address of the node permitting new joins." }, "source_ieee": { "name": "Source IEEE", "description": "IEEE address of the joining device (must be used with the install code)." }, "install_code": { "name": "Install code", "description": "Install code of the joining device (must be used with the source_ieee)." }, "qr_code": { "name": "QR code", "description": "Value of the QR install code (different between vendors)." } } }, "remove": { "name": "Remove", "description": "Removes a node from the Zigbee network.", "fields": { "ieee": { "name": "[%key:component::zha::services::permit::fields::ieee::name%]", "description": "IEEE address of the node to remove." } } }, "reconfigure_device": { "name": "Reconfigure device", "description": "Reconfigures a ZHA device (heal device). Use this if you are having issues with the device. If the device in question is a battery-powered device, ensure it is awake and accepting commands when you use this action.", "fields": { "ieee": { "name": "[%key:component::zha::services::permit::fields::ieee::name%]", "description": "IEEE address of the device to reconfigure." } } }, "set_zigbee_cluster_attribute": { "name": "Set zigbee cluster attribute", "description": "Sets an attribute value for the specified cluster on the specified entity.", "fields": { "ieee": { "name": "[%key:component::zha::services::permit::fields::ieee::name%]", "description": "IEEE address for the device." }, "endpoint_id": { "name": "Endpoint ID", "description": "Endpoint ID for the cluster." }, "cluster_id": { "name": "Cluster ID", "description": "ZCL cluster to retrieve attributes for." }, "cluster_type": { "name": "Cluster Type", "description": "Type of the cluster." }, "attribute": { "name": "Attribute", "description": "ID of the attribute to set." }, "value": { "name": "Value", "description": "Value to write to the attribute." }, "manufacturer": { "name": "Manufacturer", "description": "Manufacturer code. Use a value of \"-1\" to force no code to be set." } } }, "issue_zigbee_cluster_command": { "name": "Issue zigbee cluster command", "description": "Issues a command on the specified cluster on the specified entity.", "fields": { "ieee": { "name": "[%key:component::zha::services::permit::fields::ieee::name%]", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]" }, "endpoint_id": { "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::endpoint_id::name%]", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::endpoint_id::description%]" }, "cluster_id": { "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::name%]", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::description%]" }, "cluster_type": { "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::name%]", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::description%]" }, "command": { "name": "Command", "description": "ID of the command to execute." }, "command_type": { "name": "Command Type", "description": "Type of the command to execute." }, "args": { "name": "Args", "description": "Arguments to pass to the command." }, "params": { "name": "Params", "description": "Parameters to pass to the command." }, "manufacturer": { "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::name%]", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::description%]" } } }, "issue_zigbee_group_command": { "name": "Issue zigbee group command", "description": "Issue command on the specified cluster on the specified group.", "fields": { "group": { "name": "Group", "description": "Hexadecimal address of the group." }, "cluster_id": { "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_id::name%]", "description": "ZCL cluster to send command to." }, "cluster_type": { "name": "Cluster type", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::cluster_type::description%]" }, "command": { "name": "Command", "description": "[%key:component::zha::services::issue_zigbee_cluster_command::fields::command::description%]" }, "args": { "name": "Args", "description": "[%key:component::zha::services::issue_zigbee_cluster_command::fields::args::description%]" }, "manufacturer": { "name": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::name%]", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::manufacturer::description%]" } } }, "warning_device_squawk": { "name": "Warning device squawk", "description": "This action uses the WD capabilities to emit a quick audible/visible pulse called a \"squawk\". The squawk command has no effect if the WD is currently active (warning in progress).", "fields": { "ieee": { "name": "[%key:component::zha::services::permit::fields::ieee::name%]", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]" }, "mode": { "name": "[%key:common::config_flow::data::mode%]", "description": "The Squawk Mode field is used as a 4-bit enumeration, and can have one of the values shown in Table 8-24 of the ZCL spec - Squawk Mode Field. The exact operation of each mode (how the WD “squawks”) is implementation specific." }, "strobe": { "name": "Strobe", "description": "The strobe field is used as a Boolean, and determines if the visual indication is also required in addition to the audible squawk, as shown in Table 8-25 of the ZCL spec - Strobe Bit." }, "level": { "name": "Level", "description": "The squawk level field is used as a 2-bit enumeration, and determines the intensity of audible squawk sound as shown in Table 8-26 of the ZCL spec - Squawk Level Field Values." } } }, "warning_device_warn": { "name": "Warning device starts alert", "description": "This action starts the operation of the warning device. The warning device alerts the surrounding area by audible (siren) and visual (strobe) signals.", "fields": { "ieee": { "name": "[%key:component::zha::services::permit::fields::ieee::name%]", "description": "[%key:component::zha::services::set_zigbee_cluster_attribute::fields::ieee::description%]" }, "mode": { "name": "[%key:common::config_flow::data::mode%]", "description": "The Warning Mode field is used as a 4-bit enumeration, can have one of the values 0-6 defined below in table 8-20 of the ZCL spec. The exact behavior of the warning device in each mode is according to the relevant security standards." }, "strobe": { "name": "[%key:component::zha::services::warning_device_squawk::fields::strobe::name%]", "description": "The Strobe field is used as a 2-bit enumeration, and determines if the visual indication is required in addition to the audible siren, as indicated in Table 8-21 of the ZCL spec. \"0\" means no strobe, \"1\" means strobe. If the strobe field is “1” and the Warning Mode is “0” (“Stop”), then only the strobe is activated." }, "level": { "name": "Level", "description": "The Siren Level field is used as a 2-bit enumeration, and indicates the intensity of audible squawk sound as shown in Table 8-22 of the ZCL spec." }, "duration": { "name": "Duration", "description": "Requested duration of warning, in seconds (16 bit). If both Strobe and Warning Mode are \"0\" this field is ignored." }, "duty_cycle": { "name": "Duty cycle", "description": "Indicates the length of the flash cycle. This allows you to vary the flash duration for different alarm types (e.g., fire, police, burglar). The valid range is 0-100 in increments of 10. All other values must be rounded to the nearest valid value. Strobe calculates a duty cycle over a duration of one second. The ON state must precede the OFF state. For example, if the Strobe Duty Cycle field specifies “40,”, then the strobe flashes ON for 4/10ths of a second and then turns OFF for 6/10ths of a second." }, "intensity": { "name": "Intensity", "description": "Indicates the intensity of the strobe as shown in Table 8-23 of the ZCL spec. This attribute is designed to vary the output of the strobe (i.e., brightness) and not its frequency, which is detailed in section 8.4.2.3.1.6 of the ZCL spec." } } }, "clear_lock_user_code": { "name": "Clear lock user", "description": "Clears a user code from a lock.", "fields": { "code_slot": { "name": "Code slot", "description": "Code slot to clear code from." } } }, "enable_lock_user_code": { "name": "Enable lock user", "description": "Enables a user code on a lock.", "fields": { "code_slot": { "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]", "description": "Code slot to enable." } } }, "disable_lock_user_code": { "name": "Disable lock user", "description": "Disables a user code on a lock.", "fields": { "code_slot": { "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]", "description": "Code slot to disable." } } }, "set_lock_user_code": { "name": "Set lock user code", "description": "Sets a user code on a lock.", "fields": { "code_slot": { "name": "[%key:component::zha::services::clear_lock_user_code::fields::code_slot::name%]", "description": "Code slot to set the code in." }, "user_code": { "name": "Code", "description": "Code to set." } } } }, "issues": { "wrong_silabs_firmware_installed_nabucasa": { "title": "Zigbee radio with multiprotocol firmware detected", "description": "Your Zigbee radio was previously used with multiprotocol (Zigbee and Thread) and still has multiprotocol firmware installed: ({firmware_type}). \n Option 1: To run your radio exclusively with ZHA, you need to install the Zigbee firmware:\n - Open the documentation by selecting the link under \"Learn More\".\n - Follow the instructions described in Step 2 (and Step 2 only) to 'Flash the Silicon Labs radio Zigbee firmware'.\n Option 2: To run your radio with multiprotocol, follow these steps: \n - Go to Settings > System > Hardware, select the device and select Configure. \n - Select the Configure IEEE 802.15.4 radio multiprotocol support option. \n - Select the checkbox and select Submit. \n - Once installed, configure the newly discovered ZHA integration." }, "wrong_silabs_firmware_installed_other": { "title": "[%key:component::zha::issues::wrong_silabs_firmware_installed_nabucasa::title%]", "description": "Your Zigbee radio was previously used with multiprotocol (Zigbee and Thread) and still has multiprotocol firmware installed: ({firmware_type}). To run your radio exclusively with ZHA, you need to install Zigbee firmware. Follow your Zigbee radio manufacturer's instructions for how to do this." }, "inconsistent_network_settings": { "title": "Zigbee network settings have changed", "fix_flow": { "step": { "init": { "title": "[%key:component::zha::issues::inconsistent_network_settings::title%]", "description": "Your Zigbee radio's network settings are inconsistent with the most recent network backup. This usually happens if another Zigbee integration (e.g. Zigbee2MQTT or deCONZ) has overwritten them.\n\n{diff}\n\nIf you did not intentionally change your network settings, restore from the most recent backup: your devices will not work otherwise.", "menu_options": { "use_new_settings": "Keep the new settings", "restore_old_settings": "Restore backup (recommended)" } } } } } }, "entity": { "alarm_control_panel": { "alarm_control_panel": { "name": "[%key:component::alarm_control_panel::title%]" } }, "binary_sensor": { "accelerometer": { "name": "Accelerometer" }, "binary_input": { "name": "Binary input" }, "frost_lock": { "name": "Frost lock" }, "replace_filter": { "name": "Replace filter" }, "consumer_connected": { "name": "Consumer connected" }, "valve_alarm": { "name": "Valve alarm" }, "calibrated": { "name": "Calibrated" }, "external_sensor": { "name": "External sensor" }, "linkage_alarm_state": { "name": "Linkage alarm state" }, "ias_zone": { "name": "IAS zone" }, "hand_open": { "name": "Opened by hand" }, "mounting_mode_active": { "name": "Mounting mode active" }, "heat_required": { "name": "Heat required" }, "preheat_status": { "name": "Pre-heat status" } }, "button": { "reset_frost_lock": { "name": "Frost lock reset" }, "reset_no_presence_status": { "name": "Presence status reset" }, "feed": { "name": "Feed" }, "self_test": { "name": "Self-test" }, "reset_summation_delivered": { "name": "Reset summation delivered" }, "restart_device": { "name": "Restart device" } }, "climate": { "thermostat": { "name": "[%key:component::climate::entity_component::_::name%]" } }, "cover": { "cover": { "name": "[%key:component::cover::title%]" }, "shade": { "name": "[%key:component::cover::entity_component::shade::name%]" }, "keen_vent": { "name": "Keen vent" } }, "fan": { "fan": { "name": "[%key:component::fan::title%]" }, "fan_group": { "name": "Fan group" } }, "light": { "light": { "name": "[%key:component::light::title%]" }, "light_group": { "name": "Light group" } }, "lock": { "door_lock": { "name": "Door lock" } }, "number": { "number": { "name": "[%key:component::number::title%]" }, "detection_interval": { "name": "Detection interval" }, "on_level": { "name": "On level" }, "on_off_transition_time": { "name": "On/Off transition time" }, "on_transition_time": { "name": "On transition time" }, "off_transition_time": { "name": "Off transition time" }, "default_move_rate": { "name": "Default move rate" }, "start_up_current_level": { "name": "Start-up current level" }, "start_up_color_temperature": { "name": "Start-up color temperature" }, "timer_duration": { "name": "Timer duration" }, "filter_life_time": { "name": "Filter life time" }, "transmit_power": { "name": "Transmit power" }, "dimming_speed_up_remote": { "name": "Remote dimming up speed" }, "button_delay": { "name": "Button delay" }, "dimming_speed_up_local": { "name": "Local dimming up speed" }, "ramp_rate_off_to_on_local": { "name": "Local ramp rate off to on" }, "ramp_rate_off_to_on_remote": { "name": "Remote ramp rate off to on" }, "dimming_speed_down_remote": { "name": "Remote dimming down speed" }, "dimming_speed_down_local": { "name": "Local dimming down speed" }, "ramp_rate_on_to_off_local": { "name": "Local ramp rate on to off" }, "ramp_rate_on_to_off_remote": { "name": "Remote ramp rate on to off" }, "minimum_level": { "name": "Minimum load dimming level" }, "maximum_level": { "name": "Maximum load dimming level" }, "default_level_local": { "name": "Local default dimming level" }, "default_level_remote": { "name": "Remote default dimming level" }, "state_after_power_restored": { "name": "Start-up default dimming level" }, "auto_off_timer": { "name": "Automatic switch shutoff timer" }, "load_level_indicator_timeout": { "name": "Load level indicator timeout" }, "led_color_when_on": { "name": "Default all LED on color" }, "led_color_when_off": { "name": "Default all LED off color" }, "led_intensity_when_on": { "name": "Default all LED on intensity" }, "led_intensity_when_off": { "name": "Default all LED off intensity" }, "double_tap_up_level": { "name": "Double tap up level" }, "double_tap_down_level": { "name": "Double tap down level" }, "serving_size": { "name": "Serving to dispense" }, "portion_weight": { "name": "Portion weight" }, "away_preset_temperature": { "name": "Away preset temperature" }, "quick_start_time": { "name": "Quick start time" }, "local_temperature_calibration": { "name": "Local temperature offset" }, "presence_detection_timeout": { "name": "Presence detection timeout" }, "max_heat_setpoint_limit": { "name": "Max heat setpoint limit" }, "min_heat_setpoint_limit": { "name": "Min heat setpoint limit" }, "exercise_trigger_time": { "name": "Exercise start time" }, "external_temperature_sensor": { "name": "External temperature sensor" }, "load_room_mean": { "name": "Load room mean" }, "regulation_setpoint_offset": { "name": "Regulation setpoint offset" }, "irrigation_cycles": { "name": "Irrigation cycles" }, "irrigation_target": { "name": "Irrigation target" }, "irrigation_interval": { "name": "Irrigation interval" }, "valve_countdown_1": { "name": "Irrigation time 1" }, "valve_countdown_2": { "name": "Irrigation time 2" }, "on_led_intensity": { "name": "On LED intensity" }, "off_led_intensity": { "name": "Off LED intensity" }, "frost_protection_temperature": { "name": "Frost protection temperature" }, "valve_opening_degree": { "name": "Valve opening degree" }, "valve_closing_degree": { "name": "Valve closing degree" }, "siren_time": { "name": "Siren time" }, "timer_time_left": { "name": "Timer time left" }, "approach_distance": { "name": "Approach distance" } }, "select": { "default_siren_tone": { "name": "Default siren tone" }, "default_siren_level": { "name": "Default siren level" }, "default_strobe_level": { "name": "Default strobe level" }, "default_strobe": { "name": "Default strobe" }, "start_up_on_off": { "name": "Start-up behavior" }, "power_on_state": { "name": "Power on state" }, "backlight_mode": { "name": "Backlight mode" }, "motion_sensitivity": { "name": "Motion sensitivity" }, "monitoring_mode": { "name": "Monitoring mode" }, "approach_distance": { "name": "Approach distance" }, "window_covering_mode": { "name": "Curtain mode" }, "output_mode": { "name": "Output mode" }, "switch_type": { "name": "Switch type" }, "led_scaling_mode": { "name": "Led scaling mode" }, "smart_fan_led_display_levels": { "name": "Smart fan led display levels" }, "increased_non_neutral_output": { "name": "Non neutral output" }, "leading_or_trailing_edge": { "name": "Dimming mode" }, "feeding_mode": { "name": "Mode" }, "preset": { "name": "Preset" }, "detection_distance": { "name": "Detection distance" }, "switch_mode": { "name": "Switch mode" }, "decoupled_mode": { "name": "Decoupled mode" }, "detection_sensitivity": { "name": "Detection Sensitivity" }, "keypad_lockout": { "name": "Keypad lockout" }, "exercise_day_of_week": { "name": "Exercise day of the week" }, "valve_orientation": { "name": "Valve orientation" }, "adaptation_run_command": { "name": "Adaptation run command" }, "viewing_direction": { "name": "Viewing direction" }, "setpoint_response_time": { "name": "Setpoint response time" }, "irrigation_mode": { "name": "Irrigation mode" }, "weather_delay": { "name": "Weather delay" }, "on_led_color": { "name": "On LED color" }, "off_led_color": { "name": "Off LED color" }, "external_trigger_mode": { "name": "External trigger mode" } }, "sensor": { "analog_input": { "name": "Analog input" }, "ac_frequency": { "name": "AC frequency" }, "soil_moisture": { "name": "Soil moisture" }, "leaf_wetness": { "name": "Leaf wetness" }, "instantaneous_demand": { "name": "Instantaneous demand" }, "summation_delivered": { "name": "Summation delivered" }, "tier1_summation_delivered": { "name": "Tier 1 summation delivered" }, "tier2_summation_delivered": { "name": "Tier 2 summation delivered" }, "tier3_summation_delivered": { "name": "Tier 3 summation delivered" }, "tier4_summation_delivered": { "name": "Tier 4 summation delivered" }, "tier5_summation_delivered": { "name": "Tier 5 summation delivered" }, "tier6_summation_delivered": { "name": "Tier 6 summation delivered" }, "summation_received": { "name": "Summation received" }, "device_temperature": { "name": "Device temperature" }, "internal_temp_monitor": { "name": "Internal temperature" }, "overheated": { "name": "Overheat protection" }, "formaldehyde": { "name": "Formaldehyde concentration" }, "hvac_action": { "name": "HVAC action" }, "rssi": { "name": "RSSI" }, "lqi": { "name": "LQI" }, "timer_time_left": { "name": "Time left" }, "device_run_time": { "name": "Device run time" }, "filter_run_time": { "name": "Filter run time" }, "last_feeding_source": { "name": "Last feeding source" }, "last_feeding_size": { "name": "Last feeding size" }, "portions_dispensed_today": { "name": "Portions dispensed today" }, "weight_dispensed_today": { "name": "Weight dispensed today" }, "smoke_density": { "name": "Smoke density" }, "last_illumination_state": { "name": "Last illumination state" }, "pi_heating_demand": { "name": "Pi heating demand" }, "setpoint_change_source": { "name": "Setpoint change source" }, "power_source": { "name": "Power source" }, "window_covering_type": { "name": "Window covering type" }, "hooks_state": { "name": "Hooks state" }, "open_window_detected": { "name": "Open window detected" }, "load_estimate": { "name": "Load estimate" }, "adaptation_run_status": { "name": "Adaptation run status", "state": { "nothing": "Idle", "something": "State" }, "state_attributes": { "in_progress": { "name": "In progress" }, "run_successful": { "name": "Run successful" }, "valve_characteristic_lost": { "name": "Valve characteristic lost" } } }, "preheat_time": { "name": "Pre-heat time" }, "software_error": { "name": "Software error", "state": { "nothing": "Good", "something": "Error" }, "state_attributes": { "top_pcb_sensor_error": { "name": "Top PCB sensor error" }, "side_pcb_sensor_error": { "name": "Side PCB sensor error" }, "non_volatile_memory_error": { "name": "Non-volatile memory error" }, "unknown_hw_error": { "name": "Unknown HW error" }, "motor_error": { "name": "Motor error" }, "invalid_internal_communication": { "name": "Invalid internal communication" }, "invalid_clock_information": { "name": "Invalid clock information" }, "radio_communication_error": { "name": "Radio communication error" }, "encoder_jammed": { "name": "Encoder jammed" }, "low_battery": { "name": "Low battery" }, "critical_low_battery": { "name": "Critical low battery" } } }, "motor_stepcount": { "name": "Motor stepcount" }, "irrigation_duration": { "name": "Last irrigation duration" }, "irrigation_start_time": { "name": "Irrigation start time" }, "irrigation_end_time": { "name": "Irrigation end time" }, "irrigation_duration_1": { "name": "Irrigation duration 1" }, "irriation_duration_2": { "name": "Irrigation duration 2" }, "valve_status_1": { "name": "Status 1" }, "valve_status_2": { "name": "Status 2" }, "timer_state": { "name": "Timer state" }, "last_valve_open_duration": { "name": "Last valve open duration" }, "motion_distance": { "name": "Motion distance" } }, "switch": { "switch": { "name": "[%key:component::switch::title%]" }, "window_detection_function": { "name": "Invert window detection" }, "trigger_indicator": { "name": "LED trigger indicator" }, "power_outage_memory": { "name": "Power outage memory" }, "child_lock": { "name": "Child lock" }, "disable_led": { "name": "Disable LED" }, "invert_switch": { "name": "Invert switch" }, "inverted": { "name": "Inverted" }, "hooks_locked": { "name": "Hooks locked" }, "smart_bulb_mode": { "name": "Smart bulb mode" }, "smart_fan_mode": { "name": "Smart fan mode" }, "double_tap_up_enabled": { "name": "Double tap up enabled" }, "double_tap_down_enabled": { "name": "Double tap down enabled" }, "aux_switch_scenes": { "name": "Aux switch scenes" }, "binding_off_to_on_sync_level": { "name": "Binding off to on sync level" }, "local_protection": { "name": "Local protection" }, "one_led_mode": { "name": "Only 1 LED mode" }, "firmware_progress_led": { "name": "Firmware progress LED" }, "relay_click_in_on_off_mode": { "name": "Disable relay click in on off mode" }, "disable_clear_notifications_double_tap": { "name": "Disable config 2x tap to clear notifications" }, "led_indicator": { "name": "LED indicator" }, "window_detection": { "name": "Window detection" }, "valve_detection": { "name": "Valve detection" }, "heartbeat_indicator": { "name": "Heartbeat indicator" }, "linkage_alarm": { "name": "Linkage alarm" }, "buzzer_manual_mute": { "name": "Buzzer manual mute" }, "buzzer_manual_alarm": { "name": "Buzzer manual alarm" }, "external_window_sensor": { "name": "External window sensor" }, "use_internal_window_detection": { "name": "Use internal window detection" }, "mounting_mode": { "name": "Mounting mode" }, "prioritize_external_temperature_sensor": { "name": "Prioritize external temperature sensor" }, "heat_available": { "name": "Heat available" }, "use_load_balancing": { "name": "Use load balancing" }, "adaptation_run_enabled": { "name": "Adaptation run enabled" }, "valve_on_off_1": { "name": "Valve 1" }, "valve_on_off_2": { "name": "Valve 2" }, "double_up_full": { "name": "Double tap on - full" }, "open_window": { "name": "Open window" }, "turbo_mode": { "name": "Turbo mode" }, "detach_relay": { "name": "Detach relay" }, "enable_siren": { "name": "Enable siren" } } } }