{
  "config": {
    "flow_title": "{name} ({host})",
    "step": {
      "user": {
        "data": {
          "username": "[%key:common::config_flow::data::username%]",
          "host": "[%key:common::config_flow::data::url%]",
          "password": "[%key:common::config_flow::data::password%]",
          "tls": "The TLS version of the ISY controller."
        },
        "description": "The host entry must be in full URL format, e.g., http://192.168.10.100:80",
        "title": "Connect to your ISY"
      },
      "reauth_confirm": {
        "description": "The credentials for {host} are no longer valid.",
        "title": "Reauthenticate your ISY",
        "data": {
          "username": "[%key:common::config_flow::data::username%]",
          "password": "[%key:common::config_flow::data::password%]"
        }
      }
    },
    "error": {
      "reauth_successful": "[%key:common::config_flow::abort::reauth_successful%]",
      "unknown": "[%key:common::config_flow::error::unknown%]",
      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
      "invalid_auth": "[%key:common::config_flow::error::invalid_auth%]",
      "invalid_host": "The host entry was not in full URL format, e.g., http://192.168.10.100:80"
    },
    "abort": {
      "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"
    }
  },
  "options": {
    "step": {
      "init": {
        "title": "ISY Options",
        "description": "Set the options for the ISY Integration: \n • Node Sensor String: Any device or folder that contains 'Node Sensor String' in the name will be treated as a sensor or binary sensor. \n • Ignore String: Any device with 'Ignore String' in the name will be ignored. \n • Variable Sensor String: Any variable that contains 'Variable Sensor String' will be added as a sensor. \n • Restore Light Brightness: If enabled, the previous brightness will be restored when turning on a light instead of the device's built-in On-Level.",
        "data": {
          "sensor_string": "Node Sensor String",
          "ignore_string": "Ignore String",
          "variable_sensor_string": "Variable Sensor String",
          "restore_light_state": "Restore Light Brightness"
        }
      }
    }
  },
  "system_health": {
    "info": {
      "host_reachable": "Host Reachable",
      "device_connected": "ISY Connected",
      "last_heartbeat": "Last Heartbeat Time",
      "websocket_status": "Event Socket Status"
    }
  },
  "services": {
    "send_raw_node_command": {
      "name": "Send raw node command",
      "description": "[%key:component::isy994::options::step::init::description%]",
      "fields": {
        "command": {
          "name": "Command",
          "description": "The ISY REST Command to be sent to the device."
        },
        "value": {
          "name": "Value",
          "description": "The integer value to be sent with the command."
        },
        "parameters": {
          "name": "Parameters",
          "description": "A dict of parameters to be sent in the query string (e.g. for controlling colored bulbs)."
        },
        "unit_of_measurement": {
          "name": "Unit of measurement",
          "description": "The ISY Unit of Measurement (UOM) to send with the command, if required."
        }
      }
    },
    "send_node_command": {
      "name": "Send node command",
      "description": "Sends a command to an ISY Device using its Home Assistant entity ID. Valid commands are: beep, brighten, dim, disable, enable, fade_down, fade_stop, fade_up, fast_off, fast_on, and query.",
      "fields": {
        "command": {
          "name": "Command",
          "description": "The command to be sent to the device."
        }
      }
    },
    "get_zwave_parameter": {
      "name": "Get Z-Wave Parameter",
      "description": "Requests a Z-Wave Device parameter via the ISY. The parameter value will be returned as a entity extra state attribute with the name \"ZW_#\" where \"#\" is the parameter number.",
      "fields": {
        "parameter": {
          "name": "Parameter",
          "description": "The parameter number to retrieve from the device."
        }
      }
    },
    "set_zwave_parameter": {
      "name": "Set Z-Wave Parameter",
      "description": "Updates a Z-Wave Device parameter via the ISY. The parameter value will also be returned as a entity extra state attribute with the name \"ZW_#\" where \"#\" is the parameter number.",
      "fields": {
        "parameter": {
          "name": "[%key:component::isy994::services::get_zwave_parameter::fields::parameter::name%]",
          "description": "The parameter number to set on the end device."
        },
        "value": {
          "name": "Value",
          "description": "The value to set for the parameter. May be an integer or byte string (e.g. \"0xFFFF\")."
        },
        "size": {
          "name": "Size",
          "description": "The size of the parameter, either 1, 2, or 4 bytes."
        }
      }
    },
    "set_zwave_lock_user_code": {
      "name": "Set Z-Wave Lock User Code",
      "description": "Sets a Z-Wave Lock User Code via the ISY.",
      "fields": {
        "user_num": {
          "name": "User Number",
          "description": "The user slot number on the lock."
        },
        "code": {
          "name": "Code",
          "description": "The code to set for the user."
        }
      }
    },
    "delete_zwave_lock_user_code": {
      "name": "Delete Z-Wave Lock User Code",
      "description": "Delete a Z-Wave Lock User Code via the ISY.",
      "fields": {
        "user_num": {
          "name": "[%key:component::isy994::services::set_zwave_lock_user_code::fields::user_num::name%]",
          "description": "[%key:component::isy994::services::set_zwave_lock_user_code::fields::user_num::description%]"
        }
      }
    },
    "rename_node": {
      "name": "Rename Node on ISY",
      "description": "Renames a node or group (scene) on the ISY. Note: this will not automatically change the Home Assistant Entity Name or Entity ID to match. The entity name and ID will only be updated after calling `isy994.reload` or restarting Home Assistant, and ONLY IF you have not already customized the name within Home Assistant.",
      "fields": {
        "name": {
          "name": "New Name",
          "description": "The new name to use within the ISY."
        }
      }
    },
    "send_program_command": {
      "name": "Send program command",
      "description": "Sends a command to control an ISY program or folder. Valid commands are run, run_then, run_else, stop, enable, disable, enable_run_at_startup, and disable_run_at_startup.",
      "fields": {
        "address": {
          "name": "Address",
          "description": "The address of the program to control (use either address or name)."
        },
        "name": {
          "name": "[%key:common::config_flow::data::name%]",
          "description": "The name of the program to control (use either address or name)."
        },
        "command": {
          "name": "Command",
          "description": "The ISY Program Command to be sent."
        },
        "isy": {
          "name": "ISY",
          "description": "If you have more than one ISY connected, provide the name of the ISY to query (as shown on the Device Registry or as the top-first node in the ISY Admin Console).  If you have the same program name or address on multiple ISYs, omitting this will run the command on them all."
        }
      }
    }
  }
}