"""Support for BME280 temperature, humidity and pressure sensor."""
from functools import partial
import logging

from bme280spi import BME280 as BME280_spi  # pylint: disable=import-error
from i2csense.bme280 import BME280 as BME280_i2c  # pylint: disable=import-error
import smbus

from homeassistant.components.sensor import (
    DOMAIN as SENSOR_DOMAIN,
    SensorEntity,
    SensorEntityDescription,
)
from homeassistant.const import CONF_MONITORED_CONDITIONS, CONF_NAME, CONF_SCAN_INTERVAL
from homeassistant.helpers.update_coordinator import (
    CoordinatorEntity,
    DataUpdateCoordinator,
    UpdateFailed,
)

from .const import (
    CONF_DELTA_TEMP,
    CONF_FILTER_MODE,
    CONF_I2C_ADDRESS,
    CONF_I2C_BUS,
    CONF_OPERATION_MODE,
    CONF_OVERSAMPLING_HUM,
    CONF_OVERSAMPLING_PRES,
    CONF_OVERSAMPLING_TEMP,
    CONF_SPI_BUS,
    CONF_SPI_DEV,
    CONF_T_STANDBY,
    DOMAIN,
    MIN_TIME_BETWEEN_UPDATES,
    SENSOR_HUMID,
    SENSOR_PRESS,
    SENSOR_TEMP,
    SENSOR_TYPES,
)

_LOGGER = logging.getLogger(__name__)


async def async_setup_platform(hass, config, async_add_entities, discovery_info=None):
    """Set up the BME280 sensor."""
    if discovery_info is None:
        return
    sensor_conf = discovery_info[SENSOR_DOMAIN]
    name = sensor_conf[CONF_NAME]
    scan_interval = max(sensor_conf[CONF_SCAN_INTERVAL], MIN_TIME_BETWEEN_UPDATES)
    if CONF_SPI_BUS in sensor_conf and CONF_SPI_DEV in sensor_conf:
        spi_dev = sensor_conf[CONF_SPI_DEV]
        spi_bus = sensor_conf[CONF_SPI_BUS]
        _LOGGER.debug("BME280 sensor initialize at %s.%s", spi_bus, spi_dev)
        sensor = await hass.async_add_executor_job(
            partial(
                BME280_spi,
                t_mode=sensor_conf[CONF_OVERSAMPLING_TEMP],
                p_mode=sensor_conf[CONF_OVERSAMPLING_PRES],
                h_mode=sensor_conf[CONF_OVERSAMPLING_HUM],
                standby=sensor_conf[CONF_T_STANDBY],
                filter=sensor_conf[CONF_FILTER_MODE],
                spi_bus=sensor_conf[CONF_SPI_BUS],
                spi_dev=sensor_conf[CONF_SPI_DEV],
            )
        )
        if not sensor.sample_ok:
            _LOGGER.error("BME280 sensor not detected at %s.%s", spi_bus, spi_dev)
            return
    else:
        i2c_address = sensor_conf[CONF_I2C_ADDRESS]
        bus = smbus.SMBus(sensor_conf[CONF_I2C_BUS])
        sensor = await hass.async_add_executor_job(
            partial(
                BME280_i2c,
                bus,
                i2c_address,
                osrs_t=sensor_conf[CONF_OVERSAMPLING_TEMP],
                osrs_p=sensor_conf[CONF_OVERSAMPLING_PRES],
                osrs_h=sensor_conf[CONF_OVERSAMPLING_HUM],
                mode=sensor_conf[CONF_OPERATION_MODE],
                t_sb=sensor_conf[CONF_T_STANDBY],
                filter_mode=sensor_conf[CONF_FILTER_MODE],
                delta_temp=sensor_conf[CONF_DELTA_TEMP],
            )
        )
        if not sensor.sample_ok:
            _LOGGER.error("BME280 sensor not detected at %s", i2c_address)
            return

    async def async_update_data():
        await hass.async_add_executor_job(sensor.update)
        if not sensor.sample_ok:
            raise UpdateFailed(f"Bad update of sensor {name}")
        return sensor

    coordinator = DataUpdateCoordinator(
        hass,
        _LOGGER,
        name=DOMAIN,
        update_method=async_update_data,
        update_interval=scan_interval,
    )
    await coordinator.async_refresh()
    monitored_conditions = sensor_conf[CONF_MONITORED_CONDITIONS]
    entities = [
        BME280Sensor(name, coordinator, description)
        for description in SENSOR_TYPES
        if description.key in monitored_conditions
    ]
    async_add_entities(entities, True)


class BME280Sensor(CoordinatorEntity, SensorEntity):
    """Implementation of the BME280 sensor."""

    def __init__(self, name, coordinator, description: SensorEntityDescription):
        """Initialize the sensor."""
        super().__init__(coordinator)
        self.entity_description = description
        self._attr_name = f"{name} {description.name}"

    @property
    def native_value(self):
        """Return the state of the sensor."""
        sensor_type = self.entity_description.key
        if sensor_type == SENSOR_TEMP:
            temperature = round(self.coordinator.data.temperature, 1)
            state = temperature
        elif sensor_type == SENSOR_HUMID:
            state = round(self.coordinator.data.humidity, 1)
        elif sensor_type == SENSOR_PRESS:
            state = round(self.coordinator.data.pressure, 1)
        return state

    @property
    def should_poll(self) -> bool:
        """Return False if entity should not poll."""
        return False