"""Support for Venstar WiFi Thermostats."""
import logging

import voluptuous as vol

from homeassistant.components.climate import ClimateDevice, PLATFORM_SCHEMA
from homeassistant.components.climate.const import (
    ATTR_HVAC_MODE,
    ATTR_TARGET_TEMP_HIGH,
    ATTR_TARGET_TEMP_LOW,
    HVAC_MODE_AUTO,
    HVAC_MODE_COOL,
    HVAC_MODE_HEAT,
    HVAC_MODE_OFF,
    CURRENT_HVAC_HEAT,
    CURRENT_HVAC_COOL,
    CURRENT_HVAC_IDLE,
    CURRENT_HVAC_OFF,
    SUPPORT_FAN_MODE,
    FAN_ON,
    FAN_AUTO,
    SUPPORT_TARGET_HUMIDITY,
    SUPPORT_PRESET_MODE,
    SUPPORT_TARGET_TEMPERATURE,
    PRESET_AWAY,
    PRESET_NONE,
    SUPPORT_TARGET_TEMPERATURE_RANGE,
)
from homeassistant.const import (
    ATTR_TEMPERATURE,
    CONF_HOST,
    CONF_PASSWORD,
    CONF_SSL,
    CONF_TIMEOUT,
    CONF_USERNAME,
    PRECISION_WHOLE,
    STATE_ON,
    TEMP_CELSIUS,
    TEMP_FAHRENHEIT,
)
import homeassistant.helpers.config_validation as cv

_LOGGER = logging.getLogger(__name__)

ATTR_FAN_STATE = "fan_state"
ATTR_HVAC_STATE = "hvac_mode"

CONF_HUMIDIFIER = "humidifier"

DEFAULT_SSL = False

VALID_FAN_STATES = [STATE_ON, HVAC_MODE_AUTO]
VALID_THERMOSTAT_MODES = [HVAC_MODE_HEAT, HVAC_MODE_COOL, HVAC_MODE_OFF, HVAC_MODE_AUTO]

HOLD_MODE_OFF = "off"
HOLD_MODE_TEMPERATURE = "temperature"

PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
    {
        vol.Required(CONF_HOST): cv.string,
        vol.Optional(CONF_PASSWORD): cv.string,
        vol.Optional(CONF_HUMIDIFIER, default=True): cv.boolean,
        vol.Optional(CONF_SSL, default=DEFAULT_SSL): cv.boolean,
        vol.Optional(CONF_TIMEOUT, default=5): vol.All(
            vol.Coerce(int), vol.Range(min=1)
        ),
        vol.Optional(CONF_USERNAME): cv.string,
    }
)


def setup_platform(hass, config, add_entities, discovery_info=None):
    """Set up the Venstar thermostat."""
    import venstarcolortouch

    username = config.get(CONF_USERNAME)
    password = config.get(CONF_PASSWORD)
    host = config.get(CONF_HOST)
    timeout = config.get(CONF_TIMEOUT)
    humidifier = config.get(CONF_HUMIDIFIER)

    if config.get(CONF_SSL):
        proto = "https"
    else:
        proto = "http"

    client = venstarcolortouch.VenstarColorTouch(
        addr=host, timeout=timeout, user=username, password=password, proto=proto
    )

    add_entities([VenstarThermostat(client, humidifier)], True)


class VenstarThermostat(ClimateDevice):
    """Representation of a Venstar thermostat."""

    def __init__(self, client, humidifier):
        """Initialize the thermostat."""
        self._client = client
        self._humidifier = humidifier

    def update(self):
        """Update the data from the thermostat."""
        info_success = self._client.update_info()
        sensor_success = self._client.update_sensors()
        if not info_success or not sensor_success:
            _LOGGER.error("Failed to update data")

    @property
    def supported_features(self):
        """Return the list of supported features."""
        features = SUPPORT_TARGET_TEMPERATURE | SUPPORT_FAN_MODE | SUPPORT_PRESET_MODE

        if self._client.mode == self._client.MODE_AUTO:
            features |= SUPPORT_TARGET_TEMPERATURE_RANGE

        if self._humidifier and hasattr(self._client, "hum_active"):
            features |= SUPPORT_TARGET_HUMIDITY

        return features

    @property
    def name(self):
        """Return the name of the thermostat."""
        return self._client.name

    @property
    def precision(self):
        """Return the precision of the system.

        Venstar temperature values are passed back and forth in the
        API as whole degrees C or F.
        """
        return PRECISION_WHOLE

    @property
    def temperature_unit(self):
        """Return the unit of measurement, as defined by the API."""
        if self._client.tempunits == self._client.TEMPUNITS_F:
            return TEMP_FAHRENHEIT
        return TEMP_CELSIUS

    @property
    def fan_modes(self):
        """Return the list of available fan modes."""
        return VALID_FAN_STATES

    @property
    def hvac_modes(self):
        """Return the list of available operation modes."""
        return VALID_THERMOSTAT_MODES

    @property
    def current_temperature(self):
        """Return the current temperature."""
        return self._client.get_indoor_temp()

    @property
    def current_humidity(self):
        """Return the current humidity."""
        return self._client.get_indoor_humidity()

    @property
    def hvac_mode(self):
        """Return current operation mode ie. heat, cool, auto."""
        if self._client.mode == self._client.MODE_HEAT:
            return HVAC_MODE_HEAT
        if self._client.mode == self._client.MODE_COOL:
            return HVAC_MODE_COOL
        if self._client.mode == self._client.MODE_AUTO:
            return HVAC_MODE_AUTO
        return HVAC_MODE_OFF

    @property
    def hvac_action(self):
        """Return current operation mode ie. heat, cool, auto."""
        if self._client.state == self._client.STATE_IDLE:
            return CURRENT_HVAC_IDLE
        if self._client.state == self._client.STATE_HEATING:
            return CURRENT_HVAC_HEAT
        if self._client.state == self._client.STATE_COOLING:
            return CURRENT_HVAC_COOL
        return CURRENT_HVAC_OFF

    @property
    def fan_mode(self):
        """Return the current fan mode."""
        if self._client.fan == self._client.FAN_ON:
            return FAN_ON
        return FAN_AUTO

    @property
    def device_state_attributes(self):
        """Return the optional state attributes."""
        return {
            ATTR_FAN_STATE: self._client.fanstate,
            ATTR_HVAC_STATE: self._client.state,
        }

    @property
    def target_temperature(self):
        """Return the target temperature we try to reach."""
        if self._client.mode == self._client.MODE_HEAT:
            return self._client.heattemp
        if self._client.mode == self._client.MODE_COOL:
            return self._client.cooltemp
        return None

    @property
    def target_temperature_low(self):
        """Return the lower bound temp if auto mode is on."""
        if self._client.mode == self._client.MODE_AUTO:
            return self._client.heattemp
        return None

    @property
    def target_temperature_high(self):
        """Return the upper bound temp if auto mode is on."""
        if self._client.mode == self._client.MODE_AUTO:
            return self._client.cooltemp
        return None

    @property
    def target_humidity(self):
        """Return the humidity we try to reach."""
        return self._client.hum_setpoint

    @property
    def min_humidity(self):
        """Return the minimum humidity. Hardcoded to 0 in API."""
        return 0

    @property
    def max_humidity(self):
        """Return the maximum humidity. Hardcoded to 60 in API."""
        return 60

    @property
    def preset_mode(self):
        """Return current preset."""
        if self._client.away:
            return PRESET_AWAY
        if self._client.schedule == 0:
            return HOLD_MODE_TEMPERATURE

    @property
    def preset_modes(self):
        """Return valid preset modes."""
        return [PRESET_NONE, PRESET_AWAY, HOLD_MODE_TEMPERATURE]

    def _set_operation_mode(self, operation_mode):
        """Change the operation mode (internal)."""
        if operation_mode == HVAC_MODE_HEAT:
            success = self._client.set_mode(self._client.MODE_HEAT)
        elif operation_mode == HVAC_MODE_COOL:
            success = self._client.set_mode(self._client.MODE_COOL)
        elif operation_mode == HVAC_MODE_AUTO:
            success = self._client.set_mode(self._client.MODE_AUTO)
        else:
            success = self._client.set_mode(self._client.MODE_OFF)

        if not success:
            _LOGGER.error("Failed to change the operation mode")
        return success

    def set_temperature(self, **kwargs):
        """Set a new target temperature."""
        set_temp = True
        operation_mode = kwargs.get(ATTR_HVAC_MODE, self._client.mode)
        temp_low = kwargs.get(ATTR_TARGET_TEMP_LOW)
        temp_high = kwargs.get(ATTR_TARGET_TEMP_HIGH)
        temperature = kwargs.get(ATTR_TEMPERATURE)

        if operation_mode != self._client.mode:
            set_temp = self._set_operation_mode(operation_mode)

        if set_temp:
            if operation_mode == self._client.MODE_HEAT:
                success = self._client.set_setpoints(temperature, self._client.cooltemp)
            elif operation_mode == self._client.MODE_COOL:
                success = self._client.set_setpoints(self._client.heattemp, temperature)
            elif operation_mode == self._client.MODE_AUTO:
                success = self._client.set_setpoints(temp_low, temp_high)
            else:
                success = False
                _LOGGER.error(
                    "The thermostat is currently not in a mode "
                    "that supports target temperature: %s",
                    operation_mode,
                )

            if not success:
                _LOGGER.error("Failed to change the temperature")

    def set_fan_mode(self, fan_mode):
        """Set new target fan mode."""
        if fan_mode == STATE_ON:
            success = self._client.set_fan(self._client.FAN_ON)
        else:
            success = self._client.set_fan(self._client.FAN_AUTO)

        if not success:
            _LOGGER.error("Failed to change the fan mode")

    def set_hvac_mode(self, hvac_mode):
        """Set new target operation mode."""
        self._set_operation_mode(hvac_mode)

    def set_humidity(self, humidity):
        """Set new target humidity."""
        success = self._client.set_hum_setpoint(humidity)

        if not success:
            _LOGGER.error("Failed to change the target humidity level")

    def set_preset_mode(self, preset_mode):
        """Set the hold mode."""
        if preset_mode == PRESET_AWAY:
            success = self._client.set_away(self._client.AWAY_AWAY)
        elif preset_mode == HOLD_MODE_TEMPERATURE:
            success = self._client.set_schedule(0)
        elif preset_mode == PRESET_NONE:
            success = False
            if self._client.away:
                success = self._client.set_away(self._client.AWAY_HOME)
            if self._client.schedule == 0:
                success = success and self._client.set_schedule(1)
        else:
            _LOGGER.error("Unknown hold mode: %s", preset_mode)
            success = False

        if not success:
            _LOGGER.error("Failed to change the schedule/hold state")