* Improve gateway tests
* Harmonize all tests to use the same gateway initialization method
* Improve scene tests
* Add gateway resync call to platform tests
* Forgot to change switch tests to use common gateway method
* Improve event tests
* Improve binary sensor tests
* Fix sensor tests
* Improve readability of binary sensor
* Fix climate tests
Fix sensor platform not loading climate devices as sensors
* Add test to verify adding new sensor after start up
* Improve configure service tests
* Add refresh device service test
* Add tests for setup and unload services
* Remove refresh device test from test_init
* Extra verification of deconz services existance in hass.data
* Early draft
* Getting there
* Working fully with Hue dimmer remote
* Fix Balloobs comments
* No side effects in constructor
* Improve hue dimmer
* Add Ikea remote control
* Add xiaomi button support
* Refactor getting deconz event
* Added xiaomi devices and tradfri wireless dimmer
* Resolve unique id from device id
* Add Hue Tap and Tradfri on off switch
* More triggers for ikea on off switch and Aqara double wall switch
* Add support for Tradfri open close remote
* Fix changes after rebase
* Initial test
* Change id to event_id
* Fix translations and add subtypes
* Try if tests pass without the new tests
* Revert disabling tests
Add new exception InvalidDeviceAutomationConfig
* Ignore places calling remotes
* Enable all gateway tests
* Found the issue, now to identify which test creates it
* Remove block till done
* See if device automation test passes in azure
* Register event to device registry
* Enable test sensors
* Skip deconz event tests currently failing
* Added reason why skipping tests
* First draft
* Support enabling disabled entities
* Clean up
* Move import
* Local entity enabled replaced during rebase
* Add option flow test
* Mark options properties with option
* Fixed logger name to allow selective logging
* Fixed thermostat mode ('off' and 'heat' modes were not consistent with Eurotronic Spirit Zigbee Thermostat state) and added 'auto' to supported mode
* Added required blank lines in code
* Black formatting
* Revert logging code added to each files. Instead, only replaced "." by __package__ in const.py
* Added a test on self._device.state_on to determine hvac_mode
* Black formatting
* Added debug message when unsupported hvac_mode is encountered
* Applied formatting recommandations
* Updated tests for 'auto' hvac_mode
* fix(hue): Load the SSDP component only when it's needed
* fix(deconz): Don't load the SSDP component when it's not needed
* Update config_flow.py
* Update test_config_flow.py
* Migrate deCONZ to use new SSDP discovery
Add new discovery info manufacturer URL to be able to separate Hue and deCONZ bridges
* Mark deCONZ as migrated in Discovery component
* Fix tests
* Fix Hue discovery ignore deCONZ bridge
* Less snake more badger
* Mushroom
* Fix indentation
* Config flow ignore manufacturer url that is not philips
* Improved sensors
* Lib update signalling
* Replace reason with changed
* Move imports to top of file
* Add support for secondary temperature reported by some Xiaomi devices
* Bump dependency to v59
* Update config flow to support updating host address
Improve tests
* Update gateway to handle new address signal
* Improve description why whe need to keep step_init
* Store gateways inside a dict in deconz domain
* Make reachable events gateway specific
* Gateway shall always exist
* Adapt new device signalling to support multiple gateways
* Services follow gateway master
* Working on unload entry
* Make unload and master handover work
Improve tests for init
* Fix config flow
* Fix linting
* Clean up init tests
* Clean up hassio discovery to fit with the rest
* Store gateways inside a dict in deconz domain
* Make reachable events gateway specific
* Gateway shall always exist
* Adapt new device signalling to support multiple gateways
* Services follow gateway master
* Working on unload entry
* Make unload and master handover work
Improve tests for init
* Fix config flow
* Fix linting
* Clean up init tests
* Clean up hassio discovery to fit with the rest
* Add support for services to specify bridgeid
* Add config flow step for manual input
Remove support for loading discovery config from json file
* Small cleanup
Fix all translations to step user instead of step init
* Revert to using step_init
* Small cleanup
Add test_gateway that was forgotten in a previous PR
* Fix hound comment
* Fix empty pydocstring
* New service to load new devices from deCONZ without restarting HASS
* Do not use len to check if list is empty
* Add support for scenes to be updated as well
* Rework refresh devices method
* Fix test
* Allow device registry to optionally store config entries
* Connections and identifiers are now sets with tupels
* Make config entries mandatory
* Fix duplicate keys in test
* Rename device to device_info
* Entity platform should only create device entries if config_entry_id exists
* Fix Soundtouch tests
* Revert soundtouch to use self.device
* Fix baloobs comments
* Correct type in test
* Refactoring data_entry_flow and config_entry_flow
Move SOURCE_* to config_entries
Change data_entry_flow.FlowManager.async_init() source param default
to None
Change this first step_id as source or init if source is None
_BaseFlowManagerView pass in SOURCE_USER as default source
* First step of data entry flow decided by _async_create_flow() now
* Lint
* Change helpers.config_entry_flow.DiscoveryFlowHandler default step
* Change FlowManager.async_init source param to context dict param
* Initial commit for deCONZ switch support
* Fix hound comment
* Fix martins comment; platforms shouldn't depend on another platform
* Fix existing tests
* New tests
* Clean up unnecessary methods
* Bump requirement to v43
* Added device state attributes to light
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
* Option to load or not to load clip sensors on start
* Full flow
* Fix config flow and add tests
* Fix attribute dark reporting properly
* Imported and properly configured deCONZ shouldn't need extra input to create config entry
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Working but incomplete
* Remove events on unload
* Add unload test
* Fix failing sensor test
* Improve unload test
* Move DeconzEvent to init
* Fix visual under-indentation
* Use forward entry setup with light platform
* Move sensor to forward entry setup
* Use forward entry setup with binary sensors
* Use forward entry setup with scene platform
* Remove import of unused functionality
* Move deconz setup in to setup entry
Create initial negative tests for setup entry
* Fix hound comment
* Improved tests
* Add test for scene platform
* Add test for binary sensor platform
* Add test for light platform
* Add test for light platform
* Add test for sensor platform
* Fix hound comment
* More asserts on sensor types
* Initial working config entry with discovery
* No need for else
* Make sure that imported config doesnt exist as a config entry
* Improve checks to make sure there is only instance of deconz
* Fix tests and add new tests
* Follow upstream changes
Fix case when discovery started ongoing config entry and user completes setup from other path it was possible to complete discovered config entry as well
* Add test to make sure link doesn't bypass any check for only allowing one config entry
* Dont use len to determine an empty sequence
* Cleanup
* Allways get bridgeid to use as unique identifier for bridge
* Try config entries
* Testing
* Working flow
* Config entry text strings
* Removed manual inputs for config flow
* Support unloading of config entry
* Bump requirement to v33
* Fix comments from test
* Make sure that only one deCONZ instance can be set up
* Hass doesn't support unloading platforms yet
* Modify get_api_key to be testable
* Fix hound comments
* Add test dependency
* Add test for no key
* Bump requirement to v35
Add pydeconz to list of test components
* Don't have a check in async_setup that domain exists in hass.data
* Fix a problem with calling `deconz.close`
The event object (`EVENT_HOMEASSISTANT_STOP`) is sent as an argument to
the callable passed to `async_listen_once`. However, `deconz.close` is a bound method
that takes no arguments. Therefore, it needs a wrapper to discard the event
object.
* Removed unnecessary code and added a docstring.
* Fix the docstring according to guidelines.
* Removed unnecessary whitespace.
* Improve service by allowing to reference entity id instead of deconz id
* Change from having access to full entities to only store entity id together with deconz id
* Don't use eval, there is a dict type for voluptuous
* Use entity registry instead of keeping a local registry over entity ids
* Removed old code
* Add test for get_entry
* Bump dependency to v28
Fixed call to protected member
* Use chain to iterate over dict values
* Cleanup
* Fix hound comment
* Cleanup
* Follow refactoring of entity
* Revert to using a local registry
* Remove unused import
* self.hass is automatically available when entity is registered in hass
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
HomeAssistant Azure
Robert Svensson
HomeAssistant Azure
Paulus Schoutsen
Franck Nijhof
5mauggy
Nikolay Vasilchuk
Pascal Vizeli
Julien Brochet
Penny Wood
cgtobi
Paulus Schoutsen
Pascal Vizeli
Fabian Affolter
Akın Ömeroğlu
Leonardo Brondani Schenkel
Ville Skyttä
Jason Hu
Paulus Schoutsen
Lev Aronsky
Anders Melchiorsen