97bbc52c75
Bump async-upnp-client to 0.33.2 ( #93329 )
...
* Bump async-upnp-client to 0.33.2
* Fix tests
2023-05-23 21:51:09 +02:00
1a0035798b
Add support for Yale Home brand to august ( #93214 )
2023-05-23 21:51:06 +02:00
65c5e70064
Disconnect yale access locks at the stop event ( #93192 )
2023-05-23 21:51:02 +02:00
9bfd636ade
Add Fan and Dry HVAC modes to Advantage Air MyTemp preset ( #93189 )
2023-05-23 21:50:59 +02:00
8ebd827667
Fix china login for bmw_connected_drive ( #93180 )
...
* Bump bimmer_connected to 0.13.5
* Fix snapshots after dependency bump
* Load gcid from config entry if available
* Add tests
---------
Co-authored-by: rikroe <rikroe@users.noreply.github.com>
2023-05-23 21:50:55 +02:00
94130b7134
Bump pyatv to 0.11.0 ( #93172 )
2023-05-23 21:50:52 +02:00
0d432a4dd3
Bump `regenmaschine` to 2023.05.1 ( #93139 )
2023-05-23 21:50:49 +02:00
fab670434e
Better handling of source sensor unavailability in Riemman Integration ( #93137 )
...
* refactor and increase coverage
* fix log order
2023-05-23 21:50:45 +02:00
40c0447292
Bump `accuweather` to version 0.5.2 ( #93130 )
2023-05-23 21:50:42 +02:00
397864c497
Fix last imap message is not reset on empty search ( #93119 )
2023-05-23 21:50:39 +02:00
fa6834347a
Bump pyunifiprotect to 4.9.0 ( #93106 )
...
changelog: https://github.com/AngellusMortis/pyunifiprotect/compare/v4.8.3...v4.9.0
2023-05-23 21:50:35 +02:00
a9afccb406
Fix ONVIF cameras that change the xaddr for the pull point service ( #93104 )
2023-05-23 21:50:32 +02:00
c200c9fb4b
Increase timeout to 30 seconds for homeassistant_alerts integration ( #93089 )
2023-05-23 21:50:29 +02:00
ce98324da3
Fix NWS error with no observation ( #92997 )
...
Co-authored-by: epenet <6771947+epenet@users.noreply.github.com>
2023-05-23 21:50:26 +02:00
cd195b7f50
Update solax state class for sensors with no units ( #92914 )
...
Update sensor.py
Units.NONE is used for text entities which are not measurements.
Marking them so breaks their history.
2023-05-23 21:50:23 +02:00
367198a20c
Fix onvif cameras that cannot parse relative time ( #92711 )
...
* Fix onvif cameras that cannot parse relative time
The spec requires that the camera can parse relative or absolute timestamps
However there are many cameras that cannot parse time correctly.
Much of the event code has been offloaded to the library and
support to determine if the camera has broken time and switch
to absolute timestamps is now built into the library
* adjust verison
* fixes
* bump
* bump
* bump
* more fixes
* preen
* fix resume
* one more fix
* fix race in webhook setup
* bump to 3.1.3 which has more fixes for broken camera firmwares
* bump 3.1.4 for more fixes
* fix
* fix comment
* bump
* fix url limit
* bump
* more fixes
* old hik uses -s
2023-05-23 21:50:20 +02:00
5b0d53389c
Fix weather handling in zamg ( #85635 )
...
* TypeError handling in weather
* Check for None
* Use walrus operator as proposed
2023-05-23 21:50:05 +02:00
f09abb0f2e
Fix race in tracking pending writes in recorder ( #93414 )
2023-05-23 21:47:31 +02:00
f6e7b727b0
Add Fan and Dry HVAC modes to Advantage Air MyTemp preset ( #93189 )
2023-05-23 21:32:47 +02:00
56d2048ffa
Bump Matter server library to 3.4.1 and address changes ( #93411 )
...
* bump python matter server to 3.4.1
* address renamed attribute names in sdk 1.1
* ignore AllClustersAppServerExample
* clusters.ColorControl.Bitmaps.ColorCapabilities
* address discovery schemas
* fix all fixtures due to attribute rename
* bump python matter server to 3.4.1
* address renamed attribute names in sdk 1.1
* ignore AllClustersAppServerExample
* clusters.ColorControl.Bitmaps.ColorCapabilities
* address discovery schemas
* fix all fixtures due to attribute rename
* lint
* update requirements_all
2023-05-23 20:42:09 +02:00
46103f56c4
Fix trusted_users group schema ( #92847 )
...
* Fix trusted_users group schema
* Add tests for CONFIG_SCHEMA
2023-05-23 20:11:25 +02:00
fa366e59e0
Improve dwd_weather_warnings code quality ( #92738 )
...
Improve code quality by removing unnecessary data
2023-05-23 19:34:47 +02:00
160fce781d
Bump httpx to 0.24.1 ( #93396 )
2023-05-23 12:31:03 -05:00
8edb253ace
Add Airzone Cloud integration ( #93238 )
...
* airzone-cloud: add new integration
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Add missing aioairzone-cloud to test requirements
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Update aioairzone-cloud to v0.0.4
Allows to handle TooManyRequests exception on coordinator.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* aioairzone_cloud: reduce API requests
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone_cloud: remove system_zone_id
As opposed to the Local API of Airzone devices, the Cloud API provides unique
IDs for both systems and zones, so we can remove the system_zone_id copied from
the Local API integration.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone_cloud: minor improvements
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tests: airzone_cloud: simplify mock_get_webserver
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Update aioairzone to v0.0.5
- Add token refresh and relogin support.
- Improve fetching installation devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone_cloud: add to strict typing
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Update aioairzone to v0.0.7
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* trigger CI
* airzone_cloud: remove unneeded api_get_user call
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Add Airzone brand
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Update aioairzone to v0.1.1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone_cloud: use unique_id instead of entry_id
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone_cloud: remove special handling of TooManyRequests
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone_cloud: bump coordinator timeout to 30s
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone_cloud: make AirzoneEntity an ABC
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* airzone_cloud: fix strings typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tests: airzone_cloud: simplify webserver mock
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* Update aioairzone-cloud to v0.1.2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---------
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-05-23 19:22:50 +02:00
8bf22014ce
Update solax state class for sensors with no units ( #92914 )
...
Update sensor.py
Units.NONE is used for text entities which are not measurements.
Marking them so breaks their history.
2023-05-23 19:20:04 +02:00
942089d590
Add QNAP QSW firmware update support ( #92869 )
...
* qnap_qsw: add firmware update support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tests: qnap_qsw: remove backup leftovers
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tests: qnap_qsw: remove backup leftovers v2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---------
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-05-23 19:10:33 +02:00
9672db0354
Add new preset to Tado to enable geofencing mode ( #92877 )
...
* Add new preset to Tado to enable geofencing mode
Add new 'auto' preset mode to enable Tado to be set to auto geofencing
mode. The existing ‘home’ and ‘away’ presets switched Tado into manual
geofencing mode and there was no way to restore it to auto mode.
Note 1: Since preset modes (home, away and auto) apply to the Tado home
holistically, irrespective of the Tado climate entity used to select
the preset, three new sensors have been added to display the state of
the Tado home
Note 2: Auto mode is only supported if the Auto Assist skill is enabled
in the owner's Tado home. Various checks have been added to ensure the
Tado supports auto geofencing and if it is not supported, the preset is
not listed in the preset modes available
* Update codeowners in manifest.json
* Update main codeowners file for Tado component
2023-05-23 19:08:00 +02:00
761943e1e6
Fix non threadsafe call xiaomi_aqara ( #93405 )
2023-05-23 18:56:27 +02:00
fdf40fd1e5
Remove @bachya as a Slack codeowner ( #93408 )
...
* Remove @bachya as a Slack codeowner
* Manifest
2023-05-23 18:55:55 +02:00
e2fb1de0d9
Clean up Insteon config_flow ( #93004 )
...
* Clean up config_flow
* Remove unnecessary logging
* Remove logger
* Add more tests
* Test closing modem connection
* Simplify patching
2023-05-23 17:31:17 +02:00
d62cdf3d65
Improve error message for sensors with a non-numeric value ( #93399 )
...
* Improve error message for sensors with a non-numeric value
* Address review comment
2023-05-23 15:54:24 +02:00
f8f83906f8
Add climate on/off for supported BMW vehicles ( #92962 )
...
* Add switch platform
* Add tests
* Remove separate button
* Bump coverage
---------
Co-authored-by: rikroe <rikroe@users.noreply.github.com>
2023-05-23 15:21:29 +02:00
28fa6f541f
Bump ifaddr to 0.2.0 ( #93377 )
2023-05-23 14:18:26 +02:00
bb8dfc9470
Bump protobuf to 4.23.1 ( #93338 )
2023-05-23 13:16:20 +02:00
497fa1980b
Add Ezviz update entity ( #85377 )
...
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
2023-05-23 12:32:14 +02:00
c23718d13d
Cleanup samsungtv strings ( #93395 )
2023-05-23 12:06:19 +02:00
2721874f13
Get kostal plenticore hostname id from get_settings ( #93008 )
...
* Get hostname id from get_settings
* Add try except in get_hostname_id function
* Update tests after adding get_hostname_id function
* Revert "Update tests after adding get_hostname_id function"
This reverts commit 5fa4e533cb059f5bd9b4
2023-05-23 11:42:54 +02:00
1dccb8a9a9
Cleanup deprecated YAML from samsungtv ( #93392 )
2023-05-23 11:33:51 +02:00
d0d74eb30e
Bump mystrom to 2.2.0 ( #93389 )
2023-05-23 11:28:33 +02:00
7e1a946705
Support Airzone temperature ranges (HEAT_COOL) ( #93110 )
...
* airzone: climate: add Temperature range support
This is useful for HEAT_COOL climate mode (Airzone AUTO).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* trigger CI
---------
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-05-23 11:23:32 +02:00
86ad5ad113
Change snapcast to local_push ( #93113 )
2023-05-23 11:21:50 +02:00
e100bcfaea
Better handling of source sensor unavailability in Riemman Integration ( #93137 )
...
* refactor and increase coverage
* fix log order
2023-05-23 11:19:29 +02:00
b754f03eb1
Add WS command for getting a config entry ( #93387 )
...
* Add WS command for getting a config entry
* Update tests
2023-05-23 10:44:02 +02:00
657d285e8f
Bump glances_api to 0.4.2 ( #93352 )
2023-05-22 23:15:01 +02:00
400263cf04
Plugwise binary_sensor typing improvement ( #93371 )
...
Typing miss correction (spotted by epenet)
2023-05-22 23:02:42 +02:00
af3bbdee82
Plugwise add value_fn for switch ( #93345 )
...
* Plugwise add value_fn for switch
* Skip none as suggested
2023-05-22 22:15:02 +02:00
71466e5012
Add new sensors to AccuWeather ( #93362 )
...
* Add solar irradiance and condition sensors
* Use entity_registry_enabled_by_default fixture
2023-05-22 21:55:54 +02:00
d2a39e0e6f
Update requests to 2.31.0 ( #93363 )
2023-05-22 20:48:56 +02:00
91da7516d0
Use snapshots in devolo_home_control tests ( #93202 )
2023-05-22 18:16:57 +02:00
b10e73e2d4
Configurable KNX Telegram history size ( #93248 )
...
* Configurable KNX Telegram history size
* Add maximum value to description
2023-05-22 18:09:59 +02:00
Steven Looman
J. Nick Koston
Brett Adams
rikroe
Aaron Bach
Diogo Gomes
Maciej Bieniek
Jan Bouwhuis
Nerdix
MatthewFlamm
Michael Mraka
Daniel Gangl
Marcel van der Veldt
Patrick Li
andarotajo
epenet
Álvaro Fernández Rojas
chiefdragon
Tom Harris
Erik Montnemery
RenierM26
erikbadman
Paul Frank
luar123
Dominik
Tom
Franck Nijhof
Guido Schmitz
Matthias Alphart