* light.sensehat: adding plugin to control the 8x8 LED matrix on a Sense Hat
* add new .coveragerc entry
* light.sensehat: formatting and removing unused import
* light.sensehat: add to requirements list
* light.sensehat: update docstrings to the linter's specs
* light.sensehat: add a bit more docstring
* Remove global limit on white light temperature
Here are the supported temperatures of some popular bulbs:
Philips Hue: 2000K-6500K (the current 500-154 mired range)
LIFX Color 1000: 2500K-9000K
IKEA TRÅDFRI: 2200K, 2700K, 4000K
Obviously, Home Assistant cannot enforce a global limit and work properly
with all of these bulbs. So just remove the limit and leave it up to each
platform to work it out.
This commit updates the existing users and adds a clamp to Hue (where the
limit appears to have originated). It does not attempt to update other
platforms that might need extra handling of the larger range that is now
possible.
* Add min_mireds/max_mireds state attributes to lights
* Support min_mireds/max_mireds with LIFX lights
This makes more sense because the input and output brightness is the same.
We currently convert through RGB which does contain a brightness so we supply
an arbitrary value as input and discard the output.
* Default to white when setting LIFX temperature
Changing the temperature of a saturated color is possible but not very
interesting. So assume that a change of the temperature implies setting
the color to white, unless a different color is actually specified.
This makes the frontend temperature picker much more useful because it can
now be used to get away from a colored light.
* Default to a neutral white temperature when setting LIFX colors
This means that setting a particular color will always give the same output,
no matter what the temperature was previously at.
* Find brightness after colors
Now the color_temp logic will not see a changed color when setting
temperature+brightness and thus we will actually get a white light in
this situation.
The XY conversion can then not use brightness as input. This is not
an issue because XY only affects hue and saturation, not brightness. So
we can just use an arbitrary value as brightness input.
* Add a simple comment to a complex conditional
* Add support for Zigbee Home Automation
* Fewer magic numbers
* Make optional device config work
* Remove non-zha device_tracker stuff
* Always return boolean from is_on
* Only pass through JSON serializable discovery_info
* Update to bellows 0.2.4
* Fewer magic numbers in binary sensor
* Populate const structures from a function
* Update bellows to 0.2.6
* Fewer magic numbers in light
* Take all possible clusters when overriding
* Update bellows to 0.2.7
* Added initial support for tradfri group control
* Tried to keep original variable structure
* pylint and pep8 fixes
* Fixed lint error about docstring
* Removed unneeded stuff, renamed _light. Needs to be released pytradfri version.
* Better naming of variables inside add_devices call.
* avion light: Bump python-avion dependency version
The dependencies in python-avion weren't sufficiently strict. This is now
fixed, but means we need to depend on a new version.
* decora light: Bump python-decora dependency
There's a new version of python-decora with a reliability fix, so depend on
that.
* Refactor into find_hsbk
This will be useful for new methods that also have to find passed in colors.
* Add AwaitAioLIFX
This encapsulates the callback and Event that aiolifx needs and thus avoids an
explosion of those when new calls are added.
The refresh_state is now generally useful, so move it into its own method.
* Initial effects support for LIFX
These effects are useful as notifications. They mimic the breathe and pulse
effects from the LIFX HTTP API:
https://api.developer.lifx.com/docs/breathe-effecthttps://api.developer.lifx.com/docs/pulse-effect
However, this implementation runs locally with the LIFX LAN protocol.
* Saturate LIFX no color value
Now the color is "full saturation, no brightness". This avoids a lot of
temporary white when fading from the "no color" value and into a real color.
* Organize LIFX effects in classes
This is to move the setup/restore away from the actual effect, making it quite
simple to add additional effects.
* Stop running LIFX effects on conflicting service calls
Turning the light on/off or starting a new effect will now stop the running
effect.
* Present default LIFX effects as light.turn_on effects
This makes the effects (with default parameters) easily accessible from
the UI.
* Add LIFX colorloop effect
This cycles the HSV colors, so that is added as an internal way to set a
color.
* Move lifx to its own package and split effects into a separate file
* Always show LIFX light name in logs
The name is actually the easiest way to identify a bulb so just using it
as a fallback was a bit odd.
* Compact effect getter
* Always use full brightness for random flash color
This is a stopgap. When a bit more infrastructure is in place, the intention
is to turn the current hue some degrees. This will guarantee a flash color
that is both unlike the current color and unlike white.
* Clear effects concurrently
We have to wait for the bulbs, so let us wait for all of them at once.
* Add lifx_effect_stop
The colorloop effect is most impressive if run on many lights. Testing
this has revealed the need for an easy way to stop effects on all lights
and return to the initial state of each bulb. This new call does just that.
Calling turn_on/turn_off could also stop the effect but that would not
restore the initial state.
* Always calculate the initial effect color
To fade nicely from power off, the breathe effect needs to keep an
unchanging hue. So give up on using a static start color and just find the
correct hue from the target color.
The colorloop effect can start from anything but we use a random color
just to keep things a little interesting during power on.
* Fix lint
* Update .coveragerc
* Fixes issue with id mismatch when multiple devices are connected to the lutron bridge
* Updates labels
* removes no longer needed config values.
* removes no longer needed imports
* Add support for tradfri color temp
* Only return rgb_color if supported features indicate support.
* Return color_temp if supported features indicate support and dict
with allowed color temperatures exist for manufacturer.
* Add manufacturer specific supported features, with default.
* Color temperature is set from a dict of allowed pairs per
manufacturer, where kelvin is mapped to hex_color. When a user sets a
color temperature, the closest matching temperature is selected and
set.
* Clean up
* Cache the name of LIFX lights
After #7031 the LIFX device will change during an unregister/register
transition. This has the user-visible effect of the new device missing
a friendly name until the next poll.
We now cache the name internally and it will then transfer to the new
device when it registers.
* Allow LIFX logging even without an available device
This will allow us to set the device to None when it unregisters.
* Calculate LIFX availability from the existence of a device
This has become possible because the device is no longer needed
to provide the name of the light when it is unavailable.
We just have to forget the device when it unregisters.
* Make Tradfri discoverable
* Fix lint errors
* Fix bugs and clean up calls to light_control
* Add more color util tests
* Add coap client to dockerfile
* After rebase and all fixes
* Added color_rgb_to_hex to util.color
* Added test_color_rgb_to_hex
* Changed reference to color_rgb_to_hex
* Bumped to pytradfri 0.5, having support for retry
* Bumped to pytradfri 0.5, having support for retry
* Bumped to pytradfri 0.5, having support for retry
* Bumped to pytradfri 0.5, having support for retry
* Rolled back to 0.4
* Rolled back to 0.4
* Added initial support for IKEA Tradfri Gateway
* Pinned requirement
* Fixed lint-errors
* Added file to .coveragerc
* Trying to fix commit
* Fixed requirements_all again
* Minor reorder of code
* Minor reorder of code
* Made the changes suggested by @balloob
* Made the changes suggested by @balloob and removed debug
* Update tradfri.py
* Plug file leak on LIFX unregister
The aiolifx 0.4.4 release closes its socket when the unregister callback is
called. This plugs a file descriptor leak but also means that we must be
careful to not use the device after it goes unavailable.
Also, when a light reappears, it has a new device that must be used.
* Do not test self.available in service calls
The core will learn to handle that.
* Fire EVENT_HOMEASSISTANT_START automations off right away while starting
* Actually have core state be set to 'starting' during boot
* Fix correct start implementation
* Test and deprecate event automation platform on start
* Fix doc strings
* Remove shutting down exception
* More strict when to mark an instance as finished
* Add automation platform to listen for start/shutdown
* When we stop we should wait till it's all done
* Fix testing
* Fix async bugs in tests
* Only set UVLOOP when hass starts from CLI
* This hangs normal asyncio event loop
* Clean up Z-Wave node entity test
Alok Saboo
Wojciech Bederski
Gergely Imreh
Paulus Schoutsen
onsmam
Anders Melchiorsen
Daniel Høyer Iversen
Russell Cloran
Ron Klinkien
Fabian Affolter
Matthew Garrett
Martin Hjelmare
Sören Oldag
Mitesh Patel
Kevin
Adam Mills
Patrik
Pascal Vizeli
Teemu R
Jeff Wilson
Greg Dowling
David McNett
Craig J. Ward