fd27e4fc7d
Merge pull request #1550 from balloob/restructure_vera
...
Refactor vera into a platform.
2016-03-16 09:28:27 +00:00
9fc73fa644
Refactor vera into a platform.
2016-03-16 09:03:56 +00:00
a855a9bfcd
provide sms notifications via messagebird
2016-03-15 18:09:19 +01:00
cf285e0a0a
Merge pull request #1548 from bradsk88/wink063
...
Upgrading python-wink to 0.6.3
2016-03-14 20:16:55 -07:00
8a6cc49438
Upgrading python-wink to 0.6.3
...
This corrects a bug where multi-sensors' internal states were rendered null when downloading state updates from the Wink API.
2016-03-14 19:16:54 -06:00
d6344d6492
Fixed close connection issue with rfxtrx device and update rfxtrx lib
2016-03-14 08:33:59 +01:00
7099030cd7
Merge pull request #1529 from stefan-jonasson/tellstick-rewrite
...
Rewrite of the tellstick module. It now uses a common base for all sh…
2016-03-13 15:56:54 -07:00
eb9ed5ccfe
Rewrite of the tellstick module. It now uses a common base for all shared functionality.
...
The rewrite addresses a problem with the tellstick hardware dropping
commands when too many simultaneous calls is being made from HA. Also fixes a bug when the dim level was changed externally.
This breaks previous configurations.
The new config for tellstick is
```yaml
tellstick:
signal_repetitions: X
```
Lights and Switches are detected automatically.
Sensors work like before because they do not share any functionality with the other devices and they also needs a complete other configuration.
2016-03-13 19:28:42 +01:00
8386bda4e4
MQTT: Start embedded server if no config given
2016-03-12 21:42:47 -08:00
1fbf7afc6a
changed the powerview version
2016-03-11 06:44:04 +01:00
fd5e2d1321
change module name to correct brand name "douglas" to "hunterdouglas"
2016-03-08 11:59:46 +01:00
20dd782d9e
Rename powerview to douglas_powerview
2016-03-07 22:43:38 -08:00
40be9f4e0c
Powerview hub implementation
2016-03-07 21:07:38 +01:00
a687a3decb
Update pychromecast 0.7.2
2016-03-03 21:59:27 -08:00
88c834fdd3
Merge pull request #1466 from balloob/tests_rfxtrx_device
...
Tests rfxtrx device
2016-03-03 09:11:50 -08:00
feb1a15489
update rfxtrx lib to ver 0.5
2016-03-03 17:47:50 +01:00
2fd0b28c53
Added tests for RFxtrx device, updated rfxtrx to ver 0.5, fixed bug in setting brightness for rfxtrx light
2016-03-02 20:36:41 +01:00
bbd3a43585
Update netdisco to 0.5.4
2016-03-01 23:25:18 -05:00
be04ebf9ed
Give mFi options to control TLS usage
...
The default configuration of the mFi controller generates self-signed
certificates which are valid for short periods of time, and which are
regnerated on start or as needed. This makes requests mad. Since most
people will be using the self-signed certificates anyway, add options
to let them choose non-TLS, or unverified connections if they want/need.
This bumps the mficlient requirement to 0.3.0 for proper handling of
verify=False.
2016-02-29 17:37:41 -08:00
5449d53e07
Update netdisco to 0.5.3
2016-02-28 15:32:11 -08:00
014b11c61d
Upgrade to psutil 4.0.0
2016-02-28 16:34:06 +01:00
b70a455a13
Upgrade py-cpuinfo to 0.2.3
2016-02-28 16:16:03 +01:00
afb51d14b8
Merge pull request #1302 from persandstrom/vsure_maintenace
...
updated verisure reconnect
2016-02-27 14:50:24 -08:00
9b371a8c66
Add SendGrid notify component
2016-02-27 15:00:52 -07:00
d7e3c6a442
verisure refactoring and fix reconnect
2016-02-27 21:50:19 +01:00
5a64ef2c98
Moved Wink binary sensors to a binary sensor class
2016-02-25 14:03:02 -05:00
dc02370b43
Merge pull request #1355 from deisi/deutsche_bahn
...
New deutsche_bahn component
2016-02-25 08:31:47 -08:00
b096004449
New deutsche_bahn component
...
Uses the (schiene)[https://pypi.python.org/pypi/schiene/0.14 ] API to communicate with the webserver of bahn.de
and pulls iformation about a specific connection from the (bahn.de)[http://www.bahn.de/p/view/index.shtml ]
webpage. The departure time of the next train for the given connection is shown.
In case of delay, the delay is also shown. Additional `ATTRIBUTES` are used to
inform about e.g. the type of the train, price and if it is ontime.
Usage:
sensor:
platform: deutsche_bahn
from: name_of_start_station
to: name_of_final_station
Problems:
I'm testing it for quite some time, but I have never seen the `ATTRIBUTES` in case
of a delayed train. The `ATTRIBUTES` are directly passed from the `schiene` API. So this
usecase has not been tested yet.
deutsche_bahn ist not supporting the `schiene` api unlike in the swiss_public_transport case.
It's not guaranteed that `schiene` will work forever, infact it can happen that Bahn AG will
intentionally brake the API at some point. In the past Bahn AG has not allways been very supportive
to the opensource community.
2016-02-24 17:35:00 +01:00
2b839de854
Merge pull request #1372 from balloob/rfxtrx_bug_fix
...
Fix issue #1301
2016-02-23 23:40:17 -08:00
8dc6443d14
Merge pull request #1364 from GreenTurtwig/steam
...
Added a Steam sensor
2016-02-23 21:31:27 -08:00
532d807771
Add Steam sensor
2016-02-23 09:35:27 +00:00
590512916a
Add tests for camera.uvc and fix bugs found in the process
...
This adds tests for the uvc camera module. It's a good thing too,
because I found a few bugs which are fixed here as well:
- Graceful handling of non-integer port
- Failure to take the first host that works when probing host,internalHost
- Failure to detect if neither of them actually work
This also converts the code to only call add_devices once with a listcomp.
2016-02-22 14:37:57 -08:00
1f842140ef
Fix issue #1301
2016-02-22 13:45:01 +01:00
afe564fb3f
Move WeMo discovery into a common component
2016-02-21 22:23:00 -05:00
3da554a198
Update wink version
2016-02-21 12:01:32 -05:00
2f66528595
Added support for d-link W215 smart plug
2016-02-21 08:34:07 +01:00
27f456ca70
Add Ubiquiti Unifi device tracker
...
Ubiquiti's Unifi WAP infrastructure has a central controller (like mfi and uvc)
that can be queried for client status. This adds a device_tracker module that
can report the state of any client connected to the controller.
2016-02-19 15:24:00 -08:00
98d18c3060
Bump pywemo version.
2016-02-18 19:32:30 +00:00
bb37708716
Merge pull request #1296 from kk7ds/honeywell-no-fan
...
Fix #1287 for honeywell US systems with no fan
2016-02-17 12:18:10 -08:00
99ac4524b9
update vsure to 0.5.1
2016-02-17 19:28:26 +01:00
96dde18ae3
Fix alarmdotcom requirement 0.0.7 removed
...
Looks like alarmdotcom just released 0.1.1 and deleted 0.0.7 which is
breaking our build.
2016-02-17 08:41:46 -08:00
9aa4028718
Fix #1287 for honeywell US systems with no fan
...
This bumps the somecomfort requirement to 0.2.1 to pull in a change
that makes handling no-fan systems graceful. Adds a test that should
prove it gives us what we want.
If no fan, then fan is always idle and fanmode is None.
2016-02-17 08:16:02 -08:00
b7c4370e2b
Merge pull request #1271 from kk7ds/nx584-sensors
...
Add nx584 as a sensor platform
2016-02-16 20:40:15 -08:00
22865e5d96
Add nx584 as a sensor platform
...
This allows you to get every door, window, smoke, etc zone from your security
panel into HA. This uses the live eventing feature of pynx584, which means you
get instantaneous signaling into HA when a door opens or something happens,
which is handy for automating lights on when doors open after dark, etc.
Requires update to pynx584 0.2
2016-02-16 20:24:32 -08:00
16865b82d3
initial commit of the neurio_energy sensor
2016-02-15 15:54:07 -08:00
263839a336
Handle connection errors talking to UVC cameras during image fetch
...
This requires uvcclient==0.6 which breaks out exceptions for us.
Fixes #1244
2016-02-14 17:27:26 +00:00
c51dd64bd8
Convert Honeywell platform to use somecomfort library
2016-02-13 23:13:33 +00:00
77b141a355
Update Wink to 0.6
2016-02-13 08:17:38 -08:00
938c9888a6
Merge pull request #918 from happyleavesaoc/snapcast
...
snapcast media player
2016-02-12 19:31:07 -08:00
13b0beee31
snapcast
2016-02-12 18:35:32 -05:00
940799d0da
Update pymysensors version to 0.5
2016-02-12 21:59:24 +01:00
75d3d25969
Merge pull request #1129 from nkgilley/speedtest
...
Speedtest.net component
2016-02-12 08:59:19 -08:00
3c582d1e3c
Merge pull request #1143 from balloob/rfxtrx
...
Rfxtrx
2016-02-11 23:30:34 -08:00
4cfa14c29d
Support manually-defined WeMo devices
...
This is extremely useful if you want to support wemos that are on
another subnet or across a VPN. It also lets you sidestep the discovery
process, which is problematic for a lot of people and situations.
In order for this to work, we need to bump the pywemo requirement to
0.3.10, which includes my changes to make this possible.
WeMo devices can be manually configured by adding a static section to
the config, like this:
switch:
platform: wemo
static:
- 192.168.100.5
- 192.168.100.6
2016-02-11 17:23:20 +00:00
4ce1a67c13
Merge pull request #1077 from xrolfex/wink_garage_door_support
...
Wink Garage Door Support
2016-02-11 07:59:57 -08:00
f464d591c9
Update python wink requirement
2016-02-11 08:49:07 -05:00
06cb97adee
Merge branch 'wink_garage_door_support' of https://github.com/xrolfex/home-assistant into wink_garage_door_support
2016-02-11 08:39:20 -05:00
cab46b91e3
Updated Requirements All.
2016-02-11 08:38:05 -05:00
89f6ef9f6c
Updated requirements_all.txt
2016-02-11 08:37:16 -05:00
d2ad0620ee
Wink Garage Door Support
2016-02-11 08:37:16 -05:00
f938134069
updated rfxtrx lib
2016-02-11 14:15:51 +01:00
bb8981b611
Add apcupsd component.
2016-02-11 06:33:23 +00:00
cdf0e80773
Improve the robustness of the rfxtrx module, and solve issue #1116
2016-02-10 08:44:34 +01:00
66c5d96b43
Upgrade influxdb to 2.12.0
2016-02-09 16:32:05 +01:00
c113997609
Tweak mFi switch behavior to avoid false states
...
When we update the mFi server for the state of a switch, the new
state is not always reported immediately if we update right after
the action (the server is not RESTful).
This patch adds some internal target-state handling to report the
desired state on the next poll, allowing any subsequent polls to
override that state.
Also, bump the version requirement for mficlient to 0.2.2 to absorb
a bug fix.
2016-02-07 20:48:51 +00:00
428750eeda
Merge pull request #1151 from kk7ds/add-mfi
...
Add support for Ubiquiti mFi sensors and switches
2016-02-06 20:11:53 -08:00
0ae36e1d28
Merge pull request #1140 from kk7ds/add-nx584-alarm
...
Add Caddx/GE/Interlogix NetworX alarm panel support
2016-02-06 20:09:25 -08:00
3575ddb6ef
Add Caddx/GE/Interlogix NetworX alarm panel support
...
This adds support for NetworX-based alarm panels and should work for
any such panel equipped with a NX584 serial interface module. This
includes NX-4/6/8/8E, where the NX8E has this interface built-in.
It requires the pynx584 module, and requires running the server
component somewhere that has connectivity to the panel via serial,
which may include a serial-over-lan connection.
2016-02-07 03:06:58 +00:00
ffc4822f50
Add support for Ubiquiti mFi switchable devices
...
This adds support for mFi devices that are swichable,
such as the mFi Outlet device.
2016-02-07 03:02:49 +00:00
a147304be9
Add support for Ubiquiti mFi sensors
...
This adds support for sensors based on Ubiquiti's mFi platform.
All ports/sensors are detected from the mFi controller and exposed.
2016-02-07 02:58:04 +00:00
7eef831ff3
Merge pull request #1141 from kk7ds/add-uvc-cameras
...
Add Ubiquiti Unifi Video Camera support
2016-02-06 18:21:44 -08:00
d773ad1ecb
Fix mysensors version errors
...
* The application of the version check in unit_of_measurement was
messed up after the last refactor. Fix that again.
* An error could occur in device_state_attributes if there was a
mismatch between used value_type in the device and mysensors
version in config. Add try... except to handle that.
Bump pyvera version.
Bump pywemo version.
Add unavailable status before properly initialised for maker and insight.
2016-02-07 00:28:12 +00:00
cab1100a51
Add Ubiquiti Unifi Video Camera support
...
This adds support for Ubiquiti's UniFi Video cameras via their
NVR device (or service). By configuring just the address of the
NVR and a valid API key, all cameras are discovered and enabled,
including direct-to-camera image snapshot-based video support.
2016-02-06 22:57:44 +00:00
6e69737e88
Updating to python-wink 0.5.0
...
Major bugfix. ``` get_bulbs ``` and similar methods were always returning empty lists.
Better unit tests have been added to https://github.com/bradsk88/python-wink to avoid this regression.
2016-02-06 14:22:46 -06:00
7ef2075520
Updated requirements_all.txt
2016-02-05 14:20:06 -05:00
fbd0dbf8ee
Wink Garage Door Support
2016-02-05 12:53:57 -05:00
d469970e5a
Speedtest.net component
2016-02-04 18:21:37 -05:00
e91c8e4143
ssh aruba.py
...
req pexpect
2016-02-02 21:49:11 +00:00
031e7a4013
New liffylights release improves device detection
...
Increase device polling to 30 seconds
2016-02-02 00:15:38 +00:00
525b206e1b
Fix gen_requirements_all
2016-01-31 23:55:02 -08:00
c725f7883a
Merge pull request #1063 from stefan-jonasson/samsungtv
...
Added a new media_player platform for controlling Samsung TVs
2016-01-31 16:57:11 -08:00
5719743ec7
Fixed .coveragerc and requirements_all.txt
2016-01-31 20:02:51 +01:00
3f03fefd35
vsure 0.5.0
2016-01-31 19:23:53 +01:00
6a4b63f807
Merge pull request #1056 from flavio/scsgate
...
Add support for the SCSGate device
2016-01-31 09:34:07 -08:00
8eef978241
Add support for the SCSGate device
...
Support the SCSGate device. This will allow home-assistant to interact
with BTicino/Legrand MyHome system.
Signed-off-by: Flavio Castelli <flavio@castelli.me>
2016-01-31 18:30:43 +01:00
b21be63220
Merge pull request #1066 from TangoAlpha/dev
...
Update for new liffylights release
2016-01-31 08:32:51 -08:00
e6a8746dba
Update requirements_all
2016-01-31 15:07:06 +00:00
bd475f5db1
Added a new media_player platform for controlling Samsung TVs with a lan interface.
...
Configured like this
media_player:
platform: samsungtv
host: <IP OF TV>
name: <Name of the tv>
2016-01-31 10:06:39 +01:00
3e35bc06fc
Merge pull request #1055 from TangoAlpha/dev
...
Update to new release of liffylights
2016-01-30 12:56:22 -08:00
f76dee8a05
Update to new release of liffylights
2016-01-30 20:48:57 +00:00
75232c43ce
Merge pull request #1044 from w1ll1am23/googlevoice
...
Google Voice SMS notification support
2016-01-29 19:32:23 -08:00
a6720f54b3
Fixed style errors
2016-01-29 16:48:01 -05:00
f87c7d6732
Merge pull request #1023 from flyte/zigbee-pr
...
Add ZigBee integration and components.
2016-01-29 09:18:10 -08:00
cbc6323438
Fix imports
2016-01-28 21:45:26 -08:00
dda4f84150
Add zigbee components.
2016-01-28 13:18:29 +00:00
ee33aa73e1
Merge pull request #1017 from fabaff/psutil-upgrade
...
Upgrade psutil to 3.4.2
2016-01-27 08:08:21 -08:00
ef4661f1e6
Upgrade psutil to 3.4.2
2016-01-27 12:26:38 +01:00
b4070cfb78
Upgrade py-cpuinfo to 0.1.8
2016-01-27 11:43:49 +01:00
537a7789fd
Merge pull request #1005 from fabaff/astral-upgrade
...
Updgrade to astral 0.9
2016-01-26 17:48:14 -08:00
80d1ab78dd
Merge pull request #1006 from fabaff/influxdb-upgrade
...
Upgrade influxdb to 2.11.0
2016-01-26 17:47:59 -08:00
821238f889
Merge pull request #1007 from fabaff/telegram-upgrade
...
Upgrade python-telegram-bot to 3.2.0
2016-01-26 17:47:42 -08:00
06cf07b097
Upgrade blockchain to 1.2.1
2016-01-26 23:53:30 +01:00
271af2c608
Upgrade python-telegram-bot to 3.2.0
2016-01-26 23:47:06 +01:00
8c6ce217e6
Upgrade influxdb to 2.11.0
2016-01-26 23:45:39 +01:00
5410a0c8f6
Updgrade to astral 0.9
2016-01-26 23:34:25 +01:00
414aa8563d
Merge pull request #930 from TangoAlpha/dev
...
Add LIFX bulb support
2016-01-25 17:51:47 -08:00
80c6bf6744
bump orvibo version
2016-01-25 16:40:27 -05:00
bb7f92330d
Update liffylights version
2016-01-25 20:53:21 +00:00
7cbd780748
update vsure version
2016-01-25 21:39:41 +01:00
784fea2d56
Update for new liffylights version
2016-01-25 19:08:48 +00:00
97f0425252
Update requirements_all
2016-01-25 15:20:23 +00:00
32cfa6998c
Update requirements_all
2016-01-25 12:13:24 +00:00
4089a7a0d3
Update requirements_all
2016-01-25 10:02:03 +00:00
069dafa3a5
Update requirements_all
2016-01-25 07:38:37 +00:00
dc5d652d31
Update version pynetgear
2016-01-24 09:43:06 -08:00
2411d1f2c8
Fix wrongly generated requirements
2016-01-24 10:07:56 +00:00
9f6a1c75fa
Fix wrongly generated requirements
2016-01-24 10:01:23 +00:00
90c392e270
Upgrade PyChromecast version
2016-01-23 17:29:40 -08:00
6cb6cbfefd
Update requirements
2016-01-24 01:18:18 +00:00
143b08d661
Add statsd component.
2016-01-22 16:18:15 +01:00
d59b98ee2b
Added Insteon Support
2016-01-22 02:28:36 -05:00
56ce3e5f5a
Wink siren support
2016-01-21 18:32:10 -08:00
f6017a17b2
Add Twitter as a notification platform
2016-01-21 02:02:32 +01:00
0495776a22
merge upstream dev
2016-01-16 12:52:22 -07:00
be23c6c86d
Bump pywemo version.
2016-01-16 11:35:17 +00:00
3d27dd3ec4
Merge pull request #902 from balloob/fix_vera_sensor_subscriptions
...
Another Vera fix
2016-01-15 21:46:27 +00:00
541b268721
Update to use refactored pyvera, fixes subscription issues - esp sensors.
2016-01-15 21:30:58 +00:00
702dddbb2f
update requirements_all
2016-01-15 17:28:32 +00:00
127488004c
update coveragerc and requirements_all
2016-01-15 17:16:02 +00:00
8617b92d1b
Update RPi.GPIO version and code refactoring
2016-01-15 16:53:45 +00:00
bb80e3a9fc
Merge pull request #898 from balloob/vera_fixes
...
Vera fixes
2016-01-15 07:43:03 -08:00
80023f62d9
Merge remote-tracking branch 'upstream/dev' into nest_sensor
...
# Conflicts:
# .coveragerc
# requirements_all.txt
2016-01-15 08:18:16 -07:00
4fd79afa42
Bump pyvera version.
2016-01-15 11:45:17 +00:00
4bc33d0352
Bump pyvera version.
2016-01-15 10:34:14 +00:00
40c75f0a51
Merge pull request #887 from sdague/dev
...
Add support for Proliphix thermostat
2016-01-14 22:03:09 -08:00
bed9b038c8
Merge pull request #856 from w1ll1am23/Wink_power_strip_support
...
Wink power strip support
2016-01-14 19:23:41 -08:00
86b0e49995
Merge pull request #894 from Xorso/alarmdotcom
...
Adding in alarm control panel for Alarm.com accounts.
2016-01-14 13:01:58 -08:00
b8c8c71b78
run requirements_all again for nest sensor
2016-01-14 11:28:28 -07:00
ac34db3c8a
Merge remote-tracking branch 'upstream/dev' into nest_sensor
...
# Conflicts:
# .coveragerc
# requirements_all.txt
2016-01-14 11:00:34 -07:00
7b993da0de
address PR comments for Nest Sensor
2016-01-14 10:48:24 -07:00
de5bee6359
Updated python-wink version
2016-01-14 08:56:59 -05:00
d867366be1
add proliphix thermostat support
...
The proliphix nt10e is an early network thermostat that supports an
HTTP interface. This adds basic support for it to home-assistant (get
/ set heating setback).
2016-01-14 06:32:08 -05:00
7a2d049ce3
Removing LIFX from requirements_all.txt
2016-01-13 23:33:19 -07:00
87cecd7e95
Adding to requirements_all
2016-01-13 23:22:42 -07:00
4dd558a420
Update Requirements
2016-01-14 07:09:25 +01:00
58cee75c0e
coverage and requirements updated
2016-01-13 09:06:16 +01:00
ea8d278f8f
Rename freesms to free_mobile
2016-01-11 21:05:32 -08:00
88de9908ce
Merge branch 'pr/879' into dev
...
Conflicts:
requirements_all.txt
2016-01-11 21:03:52 -08:00
1bbecce5eb
Add requirements and coverage exception
2016-01-11 21:03:22 -08:00
a5b198e2b8
Merge pull request #771 from MartinHjelmare/mysensors-component-switch
...
Mysensors component switch
2016-01-11 19:04:35 -08:00
cdf24ec205
Merge pull request #872 from balloob/vera-debugging
...
Vera updates
2016-01-10 17:34:49 +00:00
0b3a66dd1a
Merge branch 'dev' into mysensors-component-switch
2016-01-10 04:27:39 +01:00
2d8cf7de44
Fix wrapper and S_BINARY and bump req. version
...
* Wrap existing SerialGateway instance instead of subclassing
SerialGatewat class.
* Add S_BINARY in switch platform only in version 1.5 of mysenors api.
* Use version 0.4 of pymysensors.
* Show gateway port as state attribute.
2016-01-10 04:10:38 +01:00
438e78610d
Update PyChromecast dependency
2016-01-09 16:21:08 -08:00
af21f72d17
Update pyvera version.
2016-01-09 22:58:28 +00:00
204c151113
Merge pull request #865 from fabaff/owm-update
...
Update pyowm to 2.3.0
2016-01-09 11:59:15 -08:00
9b8256ec07
Merge pull request #867 from persandstrom/verisure_fix_lost_connection
...
Verisure fix lost connection
2016-01-09 11:47:39 -08:00
a2c6cde83d
Update pyowm to 2.3.0
2016-01-09 13:20:51 +01:00
15a046f20c
update module version
2016-01-08 19:52:03 +01:00
5a1fed3980
Bump pywemo version.
2016-01-08 16:00:56 +00:00
2803631906
Updated python-wink to 0.4.0
2016-01-08 08:25:26 -05:00
5f8dd65acf
Bump pyvera version
2016-01-04 11:24:24 +00:00
217ffc215b
Update PyNetgear version
2016-01-02 10:27:11 -08:00
622a6deb04
Merge pull request #820 from balloob/vera-subscriptons
...
Add ability to respond to events from Vera hub
2016-01-02 10:15:14 +00:00
f8e5df237b
Remove '#'' from requirements
2015-12-31 18:58:12 +00:00
6773c35760
Bump pywemo version
2015-12-31 18:47:12 +00:00
5f89b34831
Bump pyvera version
2015-12-31 16:09:05 +00:00
a8bb75d070
Update sensor with subscription code, change to use pyvera library
2015-12-31 12:16:03 +00:00
6ff24ed047
Merge branch 'dev' into mysensors-component-switch
...
Conflicts:
homeassistant/components/sensor/__init__.py
homeassistant/components/switch/__init__.py
2015-12-31 06:05:06 +01:00
41a36df801
Update pywemo version
2015-12-30 11:54:21 +00:00
df99e4ef22
Merge pull request #794 from pavoni/wemo-subscription
...
Adds Wemo event support - so wemo devices update HA more quickly
2015-12-28 00:11:34 +00:00
4feef3dd0d
Simplify update state call, shutdown properly.
2015-12-27 23:09:39 +00:00
a09d731058
Merge pull request #803 from molobrakos/tellduslive2
...
added rudimentary support for telldus live
2015-12-27 15:00:01 -08:00
468087e6bc
Merge pull request #806 from persandstrom/verisure-pypi
...
verisure module from pypi
2015-12-27 21:10:18 +01:00
8c1ebde1de
Update requirements_all.txt
2015-12-27 11:10:14 -08:00
eb3da8cb03
verisure component from pypi
2015-12-27 20:07:09 +01:00
d63e5a60ae
added rudimentary support for telldus live
2015-12-27 12:32:08 +01:00
1944b6a335
Merge pull request #796 from persandstrom/verisure-update
...
Verisure update
2015-12-26 08:17:08 -08:00
b83b36274a
changed to python-verisure 0.4.1
2015-12-25 20:16:51 +01:00
77959341a3
Merge branch 'dev' into mysensors-component-switch
...
Conflicts:
homeassistant/components/sensor/mysensors.py
requirements_all.txt
2015-12-23 23:45:32 +01:00
d191635fd8
Merge branch 'yr_no' into dev
2015-12-22 18:53:27 -08:00
8e16a443e5
Added yr sensor to requirements_all
2015-12-21 10:24:22 +01:00
824dd60aef
Upgrade PyChromecast version
2015-12-18 08:58:13 -08:00
845926236e
Add config sample and fix requirements_all
2015-12-18 03:58:21 +01:00
eae07c070a
Merge branch 'dev' into mysensors-component-switch
2015-12-18 03:39:41 +01:00
659226886f
Update .coveragerc and requirements
2015-12-18 03:37:49 +01:00
0369f5153e
Disable pychromecast in requirements all because protobuf dep fails on CI
2015-12-17 09:16:36 -08:00
38c529502d
Fix requirements_all.txt
2015-12-17 09:10:19 -08:00
faff14ac94
Merge pull request #755 from molobrakos/eliqonline
...
Added support for ELIQ Online energy monitoring device (http://eliq.se/en/ )
2015-12-17 08:56:13 -08:00
f2aeb2a6f9
Merge pull request #748 from davidedmundson/fuzzy
...
Use fuzzy matching for conversation entity matching
2015-12-17 08:55:12 -08:00
3ce6463af3
Fixed python-wink in requirements_all.txt
2015-12-16 22:07:29 -05:00
cceb79a378
Pulled from dev to get up-to-date
2015-12-16 19:00:06 -05:00
f6d16ba118
updated python-wink requirements for 3.0.1
2015-12-16 15:22:38 -05:00
69d8b995d4
added eliqonline
2015-12-16 20:54:25 +01:00
afbf377b6d
Update for style changes in python-wink
2015-12-16 13:32:38 -05:00
c8234ffb8d
Merge pull request #762 from bradsk88/pywink-0.3
...
Updating to python-wink 0.3.0
2015-12-16 07:50:35 -08:00
507145e954
Merge pull request #726 from happyleavesaoc/twitch
...
twitch sensor
2015-12-15 19:59:12 -08:00
58988787ea
Updating to python-wink 0.3.0
2015-12-15 21:46:54 -06:00
79a1ffac9c
fixed pyicloud version
2015-12-15 21:13:45 -05:00
2a3e086410
fix requirements comment
2015-12-15 20:44:55 -05:00
17940f36e8
Merge pull request #759 from happyleavesaoc/orvibo_version
...
bump orvibo dependency version
2015-12-15 16:44:38 -08:00
149449624e
bump orvibo dependency version
2015-12-15 18:50:15 -05:00
a3f805d88e
Use fuzzy matching for conversation entity matching
...
Entity may not be picked up exactly by the speech recognition. Instead
of doing an exact string match, look for names which are phonetically
similar and choose the best match above a certain threshold.
This helps as entity names may often be pronoun's (Dave's bedroom) and
this allows for some minor mistakes i.e "the bedroom" will successfully
match against a switch called "bedroom"
It introduces a new library dependency, fuzzywuzzy for comparisons.
2015-12-15 20:44:35 +00:00
94eb002b0a
Updated python-wink requirements and URL
2015-12-15 10:32:20 -05:00
2e0042adb0
Tweak iCloud device tracker
2015-12-14 21:39:48 -08:00
79c92cd0c4
Merge branch 'pr/616' into dev
2015-12-14 21:31:20 -08:00
b3171c7cde
Add fritzconnection library to requirements
2015-12-13 13:20:52 -08:00
649ce7befb
Fix typo
2015-12-13 01:00:34 +01:00
27c5c1cb9f
Add dweepy
2015-12-12 22:58:08 +01:00
a10908e167
Merge pull request #727 from andylockran/dev
...
Heatmiser Thermostat Support
2015-12-11 08:44:27 -08:00
e19af76c70
Added heatmiser thermostat support
2015-12-11 12:45:27 +00:00
b440c260e6
Add jinja2 to dependencies.
2015-12-10 20:47:05 -08:00
d3a21bee82
twitch media player
2015-12-10 20:52:36 -05:00
301194034e
Rename influx to influxdb
2015-12-06 13:11:37 -08:00
a833e8b413
Update requirements_all.txt
2015-12-06 09:38:49 -08:00
e112620b2d
Merge pull request #648 from fabaff/influx
...
Influx component
2015-12-06 09:38:13 -08:00
59524c7933
Add multiple gateways
...
* Add support for multiple serial gateways.
* Fix serialization of python objects by adding dict representation of
classes.
* Add support for showing more than one child value type per entity.
The entity state is always only one value type. This is defined by
the platform value types. Value types that are not defined as the
platform value type are shown as state_attributes.
* Add more unit of measurement types.
* Clean up code.
2015-12-06 00:29:03 +01:00
f582137fe3
point ecobee to latest api which has been cleaned up a bit.
2015-12-04 14:17:12 -05:00
9ecc08c0c8
Adding in pyicloud to requirements_all.txt
2015-12-04 09:19:16 -07:00
02a8ce71d0
fix req_all
2015-12-02 16:32:28 -05:00
08de7d954a
improve support for multiple thermostats.
2015-12-02 16:22:25 -05:00
618ebfe43c
try to fix requirements for yr sensor
2015-12-01 13:40:26 +01:00
5fba67f6c3
limitlessled improvements
2015-11-29 17:15:06 -05:00
343b5bd2b8
Merge pull request #682 from happyleavesaoc/s20-update
...
Orvibo updates
2015-11-29 14:13:31 -08:00
5023772b3e
Fix gen_requirements_all.py and add updated requirements_all.txt
2015-11-29 13:58:14 -08:00
18ca7b4f9e
bump requirement version; support multiple switches per platform
2015-11-29 15:52:16 -05:00
05978ad88d
Update discovery component to netdisco 0.5.2
2015-11-28 01:36:42 -08:00
bbfeba0fe4
Merge branch 'pr/635' into dev
...
Conflicts:
requirements_all.txt
2015-11-28 00:50:18 -08:00
bbf73e0bae
Bump pywemo version - fixed scan device = None bug
2015-11-27 19:05:15 +00:00
08da1e6f8d
Add influx component
2015-11-26 23:57:34 +01:00
7f1254d750
Merge pull request #647 from mcdeck/dev
...
Support for json messages in mqtt switches and sensors
2015-11-22 11:22:56 -08:00
d6feb82f9b
Merge branch 'pr/634' into dev
...
Conflicts:
requirements_all.txt
2015-11-21 23:22:47 -08:00
f37d0d1c20
Updated wink library version in requirements_all.txt
2015-11-21 09:52:43 -05:00
44abc31057
work in progress: configurator is now in it's own component. configurator seems to work but the thermostat is now broken.
2015-11-20 17:47:25 -05:00
b4cf0e874a
Support parsing mqtt messages via jsonpath
2015-11-20 22:03:17 +01:00
8df32aac3c
point to updated python-ecobee library
2015-11-18 10:43:52 -05:00
c6d1a4bdaf
Fix configurator, rename repo, cleanup code.
2015-11-18 10:13:46 -05:00
e317e0798b
initial commit for ecobee thermostat component.
2015-11-17 19:14:29 -05:00
bca65b620a
Update Vera sensor dependency
2015-11-17 00:34:14 -08:00
e92fe149fe
Comment out requirements that break on certain platforms
2015-11-17 00:30:13 -08:00
377d2c6e5a
Allow generating requirements_all.txt
2015-11-17 00:21:49 -08:00
b4e2f4f0be
Merge pull request #625 from balloob/enhancement_pushbullet
...
Enhancement: targeted notifications in pushbullet
2015-11-15 16:41:18 -08:00
0b0fd2490d
Pushbullet; styling, requirements, example
2015-11-15 19:14:10 +00:00
57ec58e255
fixed requirements
2015-11-14 14:19:47 -05:00
cf8e23adbc
s20 switch support
2015-11-14 14:14:02 -05:00
f4a82c6f6b
Add pushetta
2015-11-10 14:17:28 +01:00
3b3f5fe6fe
Clean up notifiy component
2015-11-08 22:15:34 -08:00
0665af7f0f
Merge branch 'pr/579' into dev
...
Conflicts:
requirements_all.txt
2015-11-08 20:10:30 -08:00
7f4c13c382
Upgrade Wink version to v0.1.1
2015-11-08 19:41:22 -08:00
ea06d946e6
modified .converagerc and requirements_all.txt
2015-11-04 21:15:56 +01:00
728cd8bb5e
Upgrade Vincenty to latest version
2015-11-02 00:03:53 -08:00
6bb95f5c9b
Merge pull request #560 from pavoni/add-vera-dimmer
...
Add vera dimmer
2015-10-30 21:47:02 -07:00
0269be5813
Update pyvera version
2015-10-30 09:39:30 +00:00
031d5ce255
Fix style issues, update pyvera version.
2015-10-30 09:37:16 +00:00
9ab9d0e383
Update netdisco requirement
2015-10-26 20:49:20 -07:00
dbc05450a0
Bump requirements_all.txt version, remove pylint disable
2015-10-26 16:32:12 +00:00
8e9cafd29d
Updated requirements_all.txt. Added placeholder to the empty deviceClass filter. Will remove this if deemed unneeded, later
2015-10-25 13:32:15 +00:00
e461ceae36
discovery: update Netdisco requirement
2015-10-24 12:18:48 -07:00
b0bafa32b7
fixed typo in requirements_all.txt
2015-10-15 11:44:19 -05:00
3d838c307f
merged upstream and fixed conflict
2015-10-15 10:13:02 -05:00
1279bf7c68
Add py-cpuinfo
2015-10-15 12:13:35 +02:00
b2e39884f9
Removed name and netdisco functions, implemented update method to caches values, radiotherm lib to coveragerc and requirements_all.txt
2015-10-14 11:02:07 -05:00
fe032be352
Upgrade psutil to 3.2.2
2015-10-13 23:42:27 +02:00
384b3d0d17
Update to latest mysensors library.
...
* Adds JSON persistence support.
* Adds documentation comments for configuration options.
2015-10-11 17:05:08 -05:00
8fc2f5fe36
Update and equalize comments
2015-10-09 17:41:07 +02:00
9f6ce868e2
Add telegram
2015-10-09 14:13:05 +02:00
050f90d07a
merge with upstream
2015-10-08 08:24:38 +00:00
213a1fe4ba
Various fixes, CI validation
2015-10-08 08:00:30 +00:00
1b4ef3856a
Merge pull request #471 from alanbowman/blinkstick_support
...
[WIP] Add blinkstick support
2015-10-08 00:05:42 -07:00
ae6f651c7d
styling and version for requirement
2015-10-07 23:22:29 +00:00
d556e5979a
Updated misc files and code styling
2015-10-07 21:45:24 +00:00
047cff6596
Add blinkstick support
2015-10-06 11:10:16 +01:00
e6cd9a6dc7
Merge pull request #459 from auchter/limitlessled-white
...
Add support for white LimitlessLED devices and multiple bridges
2015-10-02 08:55:34 -07:00
42b80868d4
Update netdisco dependency
2015-10-02 06:48:46 -07:00
34531895a0
limitlessled: Use LedControllerPool
...
This change is in preparation for adapting this component to support multiple
LimitlessLED bridges. Ultimately LedControllerPool helps to maintain the
mandatory 100ms pauses across multiple controllers so messages are reliably
received.
2015-10-01 22:38:50 -05:00
e454806669
Finish plex implementation
2015-10-01 21:14:29 +02:00
64a73f6b67
Update pywemo dependency
2015-09-30 00:12:00 -07:00
2eb36c18bd
Add geofencing to automation
2015-09-29 00:18:52 -07:00
34e5ecb8ab
Merge pull request #433 from stefan-jonasson/fix_telldus_libary_cleanup
...
Telldus libary version update + added callback cleanup
2015-09-23 12:15:31 +02:00
a9ea8972dd
Updated required tellcore version
2015-09-23 08:29:57 +02:00
e492be299b
Merge pull request #417 from miniconfig/plex-dev
...
Plex media player component
2015-09-21 11:44:33 -05:00
16d75b2981
Added plexapi library to requirements_all.txt
2015-09-21 11:45:52 -04:00
bd61555698
discovery: Update to netdisco 0.4.1
2015-09-20 19:46:33 -07:00
7e75add144
Update nmap dependency
2015-09-13 23:35:12 -07:00
40340ea832
Discover sonos devices
2015-09-13 07:48:50 -07:00
a25f7eed2b
Enable polling and fix metadata updating.
...
Remove unnecessary methods.
Include SoCo in requirements_all.txt for CI.
Lock down SoCo version to 0.11.1
Add sonos.py to exclusions in .coveragerc
2015-09-11 19:38:42 -04:00
89bdead44c
Remove latest git submodules
2015-09-08 20:11:25 -07:00
326d23de38
Fix pip checking if zip files are installed
2015-09-08 19:49:27 -07:00
bb9c50d0f1
Merge pull request #318 from sfam/dev
...
Support for trigger Maker IFTTT
2015-09-04 23:57:15 +01:00
6c70ef2e6d
upgrade pyfttt version to 0.3
2015-09-04 21:57:15 +01:00
d10cecde7c
Upstream bug fixed that caused error adding some nest thermostats
2015-09-04 12:00:47 -07:00
b8e2bf6b7e
Add pyfttt requirement for Maker IFTTT
2015-09-04 16:51:25 +01:00
0987a84bf4
Merge pull request #300 from balloob/nmap-fix
...
Migrate nmap_tracker to use different nmap lib
2015-08-31 22:06:32 -07:00
78826648e3
style + dependency fix
2015-08-31 00:44:59 -07:00
b9cca82a45
Update pywemo to 0.3
2015-08-30 22:48:48 +01:00
9ecac9e934
Upgrade media_player.cast dependency
2015-08-30 01:09:11 -07:00
4e01e7ca9b
Pip requirements and fixes.
...
1) Reduced the flags being sent to pip.
2) Required a minimum of pip 7.0.0 for Home Assistant.
2015-08-29 23:17:47 -04:00
0b6358e759
Implemented comments from Paulus.
...
Revised main to use frontend and demo strings rather than importing
their domains.
Removed submodule validation.
Moved local library mounting to the bootstrap module and out of core.
Added requirements_all.txt for all dependencies.
Made core dependencies looser.
Small updates to setup.py.
2015-08-29 22:19:52 -04:00
Greg Dowling
pavoni
Florian Holzapfel
Paulus Schoutsen
bradsk88
Daniel
Stefan Jonasson
sander
Paulus Schoutsen
Jan Harkes
Dan Smith
Fabian Affolter
Justin Moy
Per Sandström
William Scanlon
Malte Deiseroth
Rowan Hine
Christian Fredborg Braedstrup
infamy
happyleavesaoc
MartinHjelmare
Eric Rolf
Eric Rolf
Flyte
nkgilley@gmail.com
carlosmgr
Tim
Flavio Castelli
Michael Kutý
Dean
hydreliox
Joseph Hughes
sfam
Sean Dague
Daren Lord
pavoni
pavoni
Erik
Erik
kevinpanaro
happyleaves
David Edmundson
caius
andylockran
Daniel Hoyer Iversen
miniconfig
Oliver van Porten
Tom Duijf
Todd Ingarfield
Andrew Thigpen
Alan Bowman
Michael Auchter
Adrien Brault
Stefan Jonasson
Jeff Schroeder
Roy Hooper
zyell
Ryan Kraus