* Fix webhook registration
* Only load camera platform with valid scope
* Add initial data handler and netatmo base class
* Update camera to use data handler
* Update init
* Parallelize API calls
* Remove cruft
* Minor tweaks
* Refactor data handler
* Update climate to use data handler
* Fix pylint error
* Fix climate update not getting fresh data
* Update climate data
* update to pyatmo 4.0.0
* Refactor for pyatmo 4.0.0
* Exclude from coverage until tests are written
* Fix typo
* Reduce parallel calls
* Add heating request attr
* Async get_entities
* Undo parallel updates
* Fix camera issue
* Introduce individual scan interval per device class
* Some cleanup
* Add basic webhook support for climate to improve responsiveness
* Replace ClimateDevice by ClimateEntity
* Add support for turning camera on/off
* Update camera state upon webhook events
* Guard data class registration with lock
* Capture errors
* Add light platform
* Add dis-/connect handling
* Fix set schedule service
* Remove extra calls
* Add service to set person(s) home/away
* Add service descriptions
* Improve service descriptions
* Use LightEntity instead of Light
* Add guard if no data is retrieved
* Make services entity based
* Only raise platform not ready if there is a NOC
* Register webhook even during runtime
* Fix turning off event
* Fix linter error
* Fix linter error
* Exclude light platform from coverage
* Change log level
* Refactor public weather sensor to use data handler
* Prevent too short coordinates
* Ignore modules without _id
* Code cleanup
* Fix test
* Exit early if no home data is retrieved
* Prevent discovery if already active
* Add services to (un-)register webhook
* Fix tests
* Not actually a coroutine
* Move methods to base class
* Address pylint comment
* Address pylint complaints
* Address comments
* Address more comments
* Add docstring
* Use single instance allowed
* Extract method
* Remove cruft
* Write state directly
* Fix test
* Add file to coverage
* Move nested function
* Move nested function
* Update docstring
* Clean up code
* Fix webhook bug
* Clean up listeners
* Use deque
* Clean up prints
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Rename data_class variable
* Break when match
* Extract method
* Extract methods
* Rename variable
* Improve comment
* Some refinements
* Extra
* Extract method
* Simplify code
* Improve reability
* Code simplification
* Simplify code
* Simplify code
* Code cleanup
* Fix import
* Clean up
* Clean up magic strings
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with HOMEDATA_DATA_CLASS_NAME
* Replace data_class_name in public weather sensor
* Clean up
* Remove deprecated config options
* Schedule immediate update on camera reconnect
* Use UUID to clearly identify public weather areas
* Use subscription mode
* Move clean up of temporary data classes
* Delay data class removal
* Fix linter complaints
* Adjust test
* Only setup lights if webhook are registered
* Prevent crash with old config entries
* Don't cache home ids
* Remove stale code
* Fix coordinates if entered mixed up by the user
* Move nested function
* Add test case for swapped coordinates
* Only wait for discovery entries
* Only use what I need
* Bring stuff closer to where it's used
* Auto clean up setup data classes
* Code cleanup
* Remove unneccessary lock
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/netatmo/test_config_flow.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Clean up dead code
* Fix formating
* Extend coverage
* Extend coverage
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add prettier (in pre-commit and CI)
* Make all file prettier
* Change order
* Add to Azure Pipelines
* Fix a YAML file prettier caught as invalid
* Remove flow mapping using curly braces from all YAML service files
* Start webhook implementation
* Add webhook implementation
* Bump pyatmo 3.2.5
* Fire event after data evaluation
* Setup webhooks after components
* Fix logging
* Wrap non async call
* Wrap non async call
* Add smoke detector and door tag webhook support
* Catch when webhook registration fails
* Log to debug
* Fix persons lookup
* Add dependency
* Remove false requirements
* Fix requirements
* Replace netatmo events by a single one
* Slim down code
* Clean up code
* Address review vomments
* Undo attribute removal
* Bump pyatmo to v3.3.0
* Only create webhook id once and reuse
* Store and reuse cloudhook url
* Wait for hass core to be up and running
* Register webhook once HA is ready
* Delay webhook registration
* Refactor to use ids in data class
* Use station_id
* Refactor Netatmo to use oauth
* Remove old code
* Clean up
* Clean up
* Clean up
* Refactor binary sensor
* Add initial light implementation
* Add discovery
* Add set schedule service back in
* Add discovery via homekit
* More work on the light
* Fix set schedule service
* Clean up
* Remove unnecessary code
* Add support for multiple entities/accounts
* Fix MANUFACTURER typo
* Remove multiline inline if statement
* Only add tags when camera type is welcome
* Remove on/off as it's currently broken
* Fix camera turn_on/off
* Fix debug message
* Refactor some camera code
* Refactor camera methods
* Remove old code
* Rename method
* Update persons regularly
* Remove unused code
* Refactor method
* Fix isort
* Add english strings
* Catch NoDevice exception
* Fix unique id and only add sensors for tags if present
* Address comments
* Remove ToDo comment
* Add set_light_auto back in
* Add debug info
* Fix multiple camera issue
* Move camera light service to camera
* Only allow camera entities
* Make test pass
* Upgrade pyatmo module to 3.2.0
* Update requirements
* Remove list comprehension
* Remove guideline violating code
* Remove stale code
* Rename devices to entities
* Remove light platform
* Remove commented code
* Exclude files from coverage
* Remove unused code
* Fix unique id
* Address comments
* Fix comments
* Exclude sensor as well
* Add another test
* Use core interfaces
* Retrieve more detailed module infos
* Switch to using IDs
* Bump pyatmo version to 2.3.3
* Update requirements
* Undo the change of the unique id
* Rename variable
cgtobi
Franck Nijhof
Paulus Schoutsen
Franck Nijhof
Paulus Schoutsen