* Add integration for wiffi devices
wiffi devices are DIY board manufactured by stall.biz.
Several devices are available, e.g. a weather station (weatherman), an
indoor environmental sensor (wiffi-wz) and some more.
This intgration has been developed using a weatherman device, but should
also work for other devices from stall.biz.
* Fix pylint warning
* Use WIFFI / STALL WIFFI instead of wiffi to be consistent with stall.biz
* Don't update disabled entities.
* fix complains
- move wiffi specific code to pypi
- remove yaml configuration code
* incorporate various suggestions from code review
* fix remaining comments from Martin
* fix comments
* add tests for config flow
* fix comments
* add missing requirements for tests
* fix pylint warnings
* fix comments
* fix comments
remove debug log
rename .translations to translations
* rebase and adapt to latest dev branch
* Update homeassistant/components/wiffi/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/wiffi/config_flow.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* fix missing import
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use helper functions for exception handling
* Create a separate class to handle communication with the device
* Update manifest
* Use coroutine for service setup
* Fix sensor update
* Update tests
* Fix MP1 switch
* Add device.py to .coveragerc
* Remove unnecessary blocking from test_learn_timeout
* Change access method for entries with default values
* Make the changes suggested by MartinHjelmare
* Remove dot from debug message
* Use underscore for unused variable
* Patch aiohttp client session close
* Add test
* Restore close regardless of auto_cleanup
* Close session instead of detaching and do not restore
* Delint test
* Add frame helper
* Use frame helper
* Test warning log when closing session
* Clean up
* Correct docstring
* Do not change shutdown
* Fix tests
* Ensure homekit_controller recieves zeroconf c# updates
If an integration has a homekit config flow step
homekit controller would not see updates for
devices that were paired with it and would not
rescan for changes.
* Only send updates to homekit controller if the device is paired
This avoids the device showing up a second time.
* remove debug
* fix refactor error
* add binary sensor platform to zwave_mqtt
* add tests for binary_sensor
* fix tests
* device class is required value
* Update homeassistant/components/zwave_mqtt/binary_sensor.py
use colon as separator
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* extend tests
* code optimize
* add test for enabling a legacy binary sensor
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* rewrite library
* Update strings.json
* fix updated with empty reply
* dont use entity_id
* atag_id
* use super init instead
* original ids to prevent breaking change
Each ServerBrowser currently runs in its own thread which
processes every A or AAAA record update per instance.
As the list of zeroconf names we watch for grows, each additional
ServiceBrowser would process all the A and AAAA updates on the network.
To avoid overwhemling the system we pre-filter here and only process
DNSPointers for the configured record name (type)
* Ensure camera stream can be restarted after failure
* If ffmpeg failed to start, was killed, or the iOS device
closed the stream right away, the stream could never
be started until the HomeKit bridge was restarted.
* watch ffmpeg instead of checking only once
* handle forceful shutdowns gracefully
* Increase coverage
* lutron_caseta: allow for multiple bridges; use config entries
Refactor to use config entries/flows, but only implemented import
(async_setup) flow handler for now.
* lutron_caseta: config_flow.py pylint hint
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: tweaks to __init__.py per PR feedback
* lutron_caseta: add config_flow tests
* lutron_caseta: verify connectivity to bridge
check connectivity before creating config entry; cleanup translation/strings
* lutron_caseta: allow for multiple bridges; use config entries
Refactor to use config entries/flows, but only implemented import
(async_setup) flow handler for now.
* lutron_caseta: config_flow.py pylint hint
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* lutron_caseta: tweaks to __init__.py per PR feedback
* lutron_caseta: add config_flow tests
* lutron_caseta: verify connectivity to bridge
check connectivity before creating config entry; cleanup translation/strings
* lutron_caseta: add error logging when exception is encountered checking connectivity
* lutron_caseta: tests mock bridge creation, not ha-side connectivity check
* lutron_caseta: catch more specific Error types while checking bridge conn.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Re-evaluate template on group member state change
* Use named groups for entity extraction regex
This will avoid unnecessary edits of match indices if the regex is
amended in the future
* Improve test coverage
* increase coverage and cleanup BleBox cover
* test entity properites via the `state` property
* properly test entity properities
* properly mock io call
* Simplification of upnp component
* Make update interval configurable
* Description
* Require minimal value of 30
* Black
* Linting
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Use tests.async_mock instead of asynctest
* Remove unnecessary existence check
* Improve songpal service registering
* Add tests
* Seperate device api from entity api
* Improve disconnect log messages
* Improve tests
* Rename SongpalDevice to SongpalEntity
* Improve reconnecting
* Remove logging and sleep patch from tests
* Test unavailable state when disconnected
* Rename SongpalEntity.dev to _dev
* Add quality scale to manifest
* Initial commit for BSBLan Climate component
The most basic climate functions work.
* Delete manifest 2.json
wrongly added to commit
* fix incorrect name
current_hvac_mode
* update coverage to exclude bsblan
* sorted and add configflow
* removed unused code, etc
* fix hvac, preset mix up
now it sets hvac mode to none and preset to eco
* fix naming
* removed commented code and cleaned code that isn't needed
* Add test for the configflow
* Update requirements
fixing some issues in bsblan Lib
* Update coverage file to include configflow bsblan
* Fix hvac preset is not in hvac mode
rewrote how to handle presets.
* Add passkey option
My device had a passkey so I needed to push this functionality to do testing
* Update constants
include passkey and added some more for device indentification
* add passkey for configflow
* Fix use discovery_info instead of user_input
also added passkey
* Fix name
* Fix for discovery_info[CONF_PORT] is None
* Fix get value CONF_PORT
* Fix move translation to new location
* Fix get the right info
* Fix remove zeroconf and fix the code
* Add init for mockConfigEntry
* Fix removed zeroconfig and fix code
* Fix changed ClimateDevice to ClimatEntity
* Fix log error message
* Removed debug code
* Change name of device.
* Remove check
This is done in the configflow
* Remove period from logging message
* Update homeassistant/components/bsblan/strings.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add passkey
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add integration for Flick Electric NZ
* Start adding Config Flow and external API
* Second Wave of Config Flow and API implementation
* Fix test (errors is None instead of blank array?)
* Don't update sensor if price is still valid
* Add input validation
* Fix linting for DOMAIN
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Remove platform schema (config is by entries only)
* Don't catch AbortFlow exception
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update test
* Re-arrange try-catch in config flow
* Fix linting in sensor.py
* Staticly define list of components
* Fix test exceptions
* Fix _validate_input not being awaited
* Fix tests
* Fix pylint logger
* Rename test and remove print debug
* Add test for duplicate entry
* Don't format string in log function
* Add tests __init__ file
* Remove duplicate result assignment
* Add test for generic exception handling
* Move translations folder
* Simplify testing
* Fix strings/translation
* Move to "flick_electric" as domain
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ISY994 Add Config and Options Flow
Add tests for config flow
Fix test
Update Tests
* Fix merge errors
* Update homeassistant/components/isy994/strings.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Fix patching in tests to not actually start Home Assistant
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor ZHA config flow
Present more descriptive list of radio types when user has to pick one.
* Update docstring.
* Add some common models to EZSP radio.
* Add more model names
More model names, less english since radio types won't be translated.
Steffen Zimmermann
Felipe Martins Diel
Martin Hjelmare
Robert Svensson
Franck Nijhof
Emily Mills
Thomas Johanns
On Freund
J. Nick Koston
Marcel van der Veldt
Paulus Schoutsen
gadgetmobile
MatsNl
Xiaonan Shen
Alexei Chetroi
Dan Jenkins
Steven Looman
Fredrik Erlandsson
jjlawren
Chris Aljoudi
Chris Talkington
ollo69
Thomas Hollstegge
shbatm
Daniel Høyer Iversen
Pieter Goetschalckx
Willem-Jan
Brynley McDonald