* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
* renamed add_devices to async_add_devices according to hass naming scheme
* replaced some occurencies of async_add_entites to async_add_devices
* fixed unit test
* fixed unit test
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
* add percentage (DPT_Scaling) KNX sensors
1. moved basic functionality to KNXSensorBaseClass instead of
KNXSensorFloatClass
2. added "if" clause in setup for a "percentage" sensor type and added KNXSensorDPTScalingClass
* support-knx-percentage-sensor: lint correction
Updated convert method base sensor class to avoid lint warning
(R201 - Method could be a function)
* added PLATFORM_SCHEMA for configuration
1. added SCHEMA extension for defined keywords
2. moved fixed data for internal settings out of sensor logic
3. moved everything into standard KNXSensor object
4. added parsing of extra config parameters in __init__
* correct lint errors on support-knx-percentage-sensor
* Added Sensor Support for KNX Devices
Added Sensor for KNX Group Addresses
- Temperature
- Wind Speed
- Illuminance(LUX)
Mostly to fetch from a KNX Wetterstation
* Some pylint,flake8 fixes
* Pydoc Fixes
* Fix Coverage Ordering
* Refactor KNX Sensor
Refactor to Idea from @usul27 and added Minimum Maximum
* Removed Measurement Untis from const.py
Removed needed Measurement Units from const.py and add it to
sensor\knx.py
* Change .coveragerc
* Add as Requested from @Teagan42 the new Type Names
Additional add CONF_MINIMUM and CONF_MAXIMUM
* Added Changes as Requested from @Teagan42
* Fixed the Merge Conflict, Hopefully i done it rigth :-)
* Fixed Styling
Julius Mittenzwei
Otto Winter
Fabian Affolter
Pascal Vizeli
Open Home Automation
Will W
Yum
Ron Klinkien
Paulus Schoutsen
David Baumann