* Added support for dyson hot+cool fan as climate device
* Removed decimal place in kelvin units conversion
Minor edits to be consistent with Dyson's internal conversion of temperature from kelvin to celsius. It does not include decimal place to convert between kelvin and celsius.
* made changes according to comments
* Refactored target temp logics, fixed enum issues
* changed name of component to entity
* removed temperature conversion for min/max property
* changed back to 644 permission
* added extra tests for almost-all coverage
* changed assert method to avoid lack of certain method in py35
* added test_setup_component
* shorten line length
* fixed mock spec and added checking of message listener is called
* added doc string and debug msg
* shorten line length
* removed pending target temp
* Enable brightness slider for RGB
If we are using RGB with no brightness topic, the brighness slider
should still be visible, as we can scale the RGB amount to give us the
brightness.
* Output RGB scaled by brightness
If we are outputting to an RGB device, but do not have a dedicated
brightness topic set, when the brightness slider is changed, we should
output the current colour's HS, with the V coming from the brightness
slider.
* Brightness from RGB when we're not using a brightness topic
When we aren't using a brightness topic, set the brightness slider based
on the received value from an RGB -> HSV conversion.
* Test for new brightness state scaled by RGB
This adds a test to make sure the brightness stored in the state is
being computed correctly from the RGB value when a dedicated brightness
topic is not set.
* Changes from review
Fixes formatting of supported features flags, and checks HS colour
hasn't been set when operating in RGB-only mode
* Set optimistic brightness correctly in rgb mode
When we're using rgb mode to set the brightness, we want to set
optimistic brightness if:
we are running in optimistic mode
OR
the brightness state topic isn't set and we have a brightness command topic
OR
the rgb state topic isn't set and we don't have a brightness command topic
* Add test for turn_on in RGB brightness mode
* hass.async_add_executor_job
* Fix accessories.run -> async_track_state_change
* Fixed media_player test
* Flags are now local vars
* consistent use of " and '
* Initial changes to resolve issue 16733
Added logic to ensure that if the state is unknown during startup that the error about being unable to parse the value is not logged.
Further, also ensured that if an attribute is set to None it does not try to convert the None value to Fahrenheit as that will cause an error.
* Cleaned up and added few comments
Cleaned up some lines based on flake8 and pylint.
Added some comment lines on the items added.
* Changed to async and using async_added_to_hass
Changed sensor to use async.
Registering state tracking for sensors and initial setup is now done upon the home assistant start event.
* Updated test and small fix
Updated test to handle unavailable state of sensor and return of None for attributes when data is unavailable.
Ensured that atributes are set to None when state is unavailable due to incorrect data.
* Fixed some flake8 issues in test
Fixed some flake8 issues in test_moldindicator.py.
* Updates based on review
Updates based on review from MartinHjelmare
* Added sensor entity_id to logger errors
Added sensor entity_id to logger error messages
Update test to use constant STATE_UNKNOWN instead of fixed string.
* ID is added to cards without ID in ui-lovelace.yaml when loaded
* Hound
* Remove ui-lovelace.yaml
* Nicer get
* Update tests
* If YAML dump fails, config not gone
* Add tests
* Woof!
* Remove nosetests
* Address comments
* Woof...
* Delete test.yaml
* update rights to saved file
* fix
* line break
* Add device_registry support for sensor and switch domains
* Add device_registry support for light
* Add device registry to binary_sensor, climate, cover
* Add device registry to zwave fan
* Fix test for config entry loading
* lint
* revert erroneous modification
* Revert device_registry.py change
* First commit
* Feature complete?
* Add dependency
* Move setting poe mode logic to library
* Use guard clauses
* Bump requirement to 2
* Simplify saving switches with poe off
* Store and use poe mode
* Fix indentation
* Fix flake8
* Configuration future proofing
* Bump dependency to v3
* Add first test
* Proper use of defaults with config flow (thanks helto)
* Appease hound
* Make sure there can't be duplicate entries of combination host+site
* More tests
* More tests
* 98% coverage of controller
* Fix hound comments
* Config flow step init not necessary
* Use async_current_entries to check if host and site for controller is used
* Remove storing/restoring poe off devices to slim PR
* First batch of switch tests
* More switch tests.
* Small improvements and clean up
* Make tests pass
Don't name device in device registry
* Dont process clients that belong to non-UniFi POE switches
* Allow selection of site from a list in config flow
* Fix double blank lines in method
* Update codeowners
* Fix rangefilter
RangeFilter would break for lower or upper bounds of 0, evaluating to False and thus not being handled correctly as bounds
* Add test for zero bounds
* Add notify.homematic_signalgen
* Update homematic_signalgen.py, test_homematic_signalgen.py
* Added new files to .coveragerc
* Fixed review comments from houndci-bot
* Fixed pylint errors
* Regenerate requirements_test_all.txt by script/gen_requirements_all.py
* Fix flake8 warnings
* Renamed notify.homematic_signalgen to notify.homematic and made it generic
* Update .coveragerc and requirements_test_all.txt
* Removed the terms signal generator from the sources.
* Support abbreviations in discovery topic
* Add abbreviations for all words. Add testcase.
Add missing docstring.
* Add missing abbreviations
* Support topic prefix
* Update test case
* Restrict topic prefix
* Fix merge
* Simplify abbreviations expanding, assume TOPIC_PREFIX is one character long
* Support abbreviated keys instead of words
* Remove redundant abbreviations
* Remove extra spaces in abbreviation list
* Make topic prefix less restrictive
* Make topix prefix a bit more restrictive again
* Add permission foundation
* Address comments
* typing
* False > True
* Convert more lambdas
* Use constants
* Remove support for False
* Fix only allow True
* Add support for off_delay to MQTT binary_sensor
* Fix debounce, add testcase
* Make off_delay number of seconds instead of timedelta
* Update mqtt.py
* Fix testcase, remove CONF_OFF_DELAY from const.py
* Enable BMW component to be unit system aware
* lint fixes
* use constants for config entries
* remove configuration from component and rely only on HA config of unit_system
* remove unused import
* update code to reflect feedback
* lint fixes
* remove unnecessary comments
* rework return statement to satisfy pylint
* more lint fixes
* add tests for volume utils
* lint fixes
* more lint fixes
* remove unnecessary comments
* Clean up leftover config schema option
* Allow import groups via new config yaml setup
* Fix and add test
* Add a test without groups for legacy import
* Change default import groups to False
* Fix I/O in test
* Don't set initial temperature in non-optimistic mode
* Fix tests
* Don't set initial values in non-optimistic mode
For fan mode, current operation and swing mode
* Fix tests again
* Initial Z-Wave Config Entry Support
* Use conf.get() for config import
* Uncomment test
* Re-add line breaks
* tabs -> space
* Unused import cleanup & lint fixes
* Remove unused config flow link step
* Address comments
* Remove unused import
* Fix tests
* Check for valid usb_path
* Test for Z-Stick in config flow
* Pass config dir to ZWaveOption
* Auto-generate Network Key if none provided
* Test fixes
* Address comments & more start network service registration
* add_executor_job for options.lock()
* SMHI Component
* Clean up typos
* Fixed default values first config to home location (tests will follow)
* Fixed tests and removed unused function
* Minor fixup after comments from @kane610
* add support for precipitation in forecast
* Removed old async_step_init not needed.
* Moved econet to water_heater
* Wink and Econet are now in water heater!
* Removed away mode from econet and added demo water heater
* Added demo tests
* Updated coveragerc
* Fix lint issues.
* updated requirements all
* Requirements all actually updated.
* Reset wink and econet and fixed service.
* Reset wink and econet to the correct dev state
* Reset requirements_all and .coveragerc and removed the new econet and wink water_heater files
* Removed @bind_hass service methods
* Actually reset the .coverage file
* Fixed the tests
* Addressed @MartinHjelmare's comments
* Removed unused import
* Switched to async_add_executor_job
* Fixed lint
* Removed is_on
* Added celsius demo water heater and tests.
* Removed metric import
* YesssSMS handling more errors, upgrade to version 0.2.1
- handling missing internet connection nicely
- disabling login with non-working credentials (website locked account for 1 hour)
- upgrade to new upstream version of YesssSMS
* notify.yessssms tests
* test requirements
* flake8 fix
* fixing tests, new upstream version 0.2.3
fixing tests based on requested changes, coverage
* removing unmotivated print
* passing exception to ConnectionError and SMSSendingError logger
* Pass headers to webhook handler
* Refactors webhook component to post Request object instead of data
* Update webhook tests
* Cleanup webhook test and fix a bug in ifttt
* Address code review comments
* Fixed file corruption bugs in private storage code.
* Restoring fixed test case.
* Implemented test suite for utils/json.py
* Added new unit test cases for util/json.py
* Dixed formatting nags
* Fixed more nags from the Hound
* Added doc strings to some very short functions
* Fixing lint's complains about my choice of parts of speach. Sigh.
* Moved atomic save operations down into util/json.py so that all benefit.
Added extra clean-up code to ensure that temporary files are removed in
case of errors.
Updated emulated_hue unit tests to avoid errors.
* Apparently 'e' is not allows as a variable name for an exception...
* Add zwave.network_complete_some_dead event
* add missing comma
* typo
* Add SIGNAL_AWAKE_NODES_QUERIED_SOME_DEAD Test
* Add blank lines
* fix linter warnings
Line too long
* remove trailing whitespace
* Change test signal
* Listen to other event
Oscar Tin Lai
Paulus Schoutsen
Bob Clough
Robert Svensson
cdce8p
Anders Melchiorsen
emontnemery
Malte Franken
ehendrix23
Bram Kragten
Charles Garwood
Tsvi Mostovicz
Aaron Bach
Niels Mündler
kennedyshead
Martin Mois
Nikolay Vasilchuk
Pascal Vizeli
uchagani
Martin Hjelmare
Dav0815
definitio
Markus Nigbur
cgtobi
Daniel Perna
Otto Winter
Tomas Hellström
Jari Ylimäinen
William Scanlon
Martin Berg
Julius Mittenzwei
Florian Klien
Ana Paula Gomes
Georgi Kirichkov
Jerad Meisner
Adam Mills
Diogo Gomes
mvn23
Nicko van Someren
Steven Looman
Jan van Helvoort