* Add Pinecil integration
* Refactor with new library
* Add tests for config flow, remove unused code
* requested changes
* update requirements
* Move some sensor values to diagnostics, add tests for sensors
* User service uuid in discovery
* fix manufacturer name
* Bump pynecil to version 0.2.0
* Rename integration to IronOS
* Recreate snapshot
* Update strings
* type checking
* Update snapshot
* Add async_setup to coordinator
* Show device id with serial number
* Added missing boost to operation mode states
* remove super call
* Refactor
* tests
* Add an integration for Bryant Evolution HVAC systems.
* Update newly created tests so that they pass.
* Improve compliance with home assistant guidelines.
* Added tests
* remove xxx
* Minor test cleanups
* Add a test for reading HVAC actions.
* Update homeassistant/components/bryant_evolution/__init__.py
Co-authored-by: Josef Zweck <24647999+zweckj@users.noreply.github.com>
* Update homeassistant/components/bryant_evolution/climate.py
Co-authored-by: Josef Zweck <24647999+zweckj@users.noreply.github.com>
* Update homeassistant/components/bryant_evolution/climate.py
Co-authored-by: Josef Zweck <24647999+zweckj@users.noreply.github.com>
* Update homeassistant/components/bryant_evolution/climate.py
Co-authored-by: Josef Zweck <24647999+zweckj@users.noreply.github.com>
* Update homeassistant/components/bryant_evolution/climate.py
Co-authored-by: Josef Zweck <24647999+zweckj@users.noreply.github.com>
* Update homeassistant/components/bryant_evolution/climate.py
Co-authored-by: Josef Zweck <24647999+zweckj@users.noreply.github.com>
* Update homeassistant/components/bryant_evolution/config_flow.py
Co-authored-by: Josef Zweck <24647999+zweckj@users.noreply.github.com>
* Address reviewer comments.
* Address additional reviewer comments.
* Use translation for exception error messages.
* Simplify config flow.
* Continue addressing comments
* Use mocking rather than DI to provide a for-test client in tests.
* Fix a failure in test_config_flow.py
* Track host->filename in strings.json.
* Use config entry ID for climate entity unique id
* Guard against fan mode returning None in async_update.
* Move unavailable-client check from climate.py to init.py.
* Improve test coverage
* Bump evolutionhttp version
* Address comments
* update comment
* only have one _can_reach_device fn
* Auto-detect which systems and zones are attached.
* Add support for reconfiguration
* Fix a few review comments
* Introduce multiple devices
* Track evolutionhttp library change that returns additional per-zone information during enumeration
* Move construction of devices to init
* Avoid triplicate writing
* rework tests to use mocks
* Correct attribute name to unbreak test
* Pull magic tuple of system-zone into a constant
* Address some test comments
* Create test_init.py
* simplify test_reconfigure
* Replace disable_auto_entity_update with mocks.
* Update tests/components/bryant_evolution/test_climate.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update tests/components/bryant_evolution/test_climate.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update tests/components/bryant_evolution/test_config_flow.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update homeassistant/components/bryant_evolution/config_flow.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update tests/components/bryant_evolution/test_config_flow.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Update tests/components/bryant_evolution/test_config_flow.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* fix test errors
* do not access runtime_data in tests
* use snapshot_platform and type fixtures
---------
Co-authored-by: Josef Zweck <24647999+zweckj@users.noreply.github.com>
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
Update nibe library to 2.11.0 with changes
Addition of BT71 for F1155/F1255
Addition of climate zones for S1155/S1255
Include log information on incomplete reads
Correct fan speeds from being a percentage to a mapping on F series pumps
Corrections for airflow units
Let denied alarm resets writes be considered as a valid connection on setup
* Add dynamic rate limiter
* tweaks
* Revert min polling back to 2min
* Set max 1 hour
* Remove redundant update_interval
* Tuning and fixes
* Reduce double API calls
* Type test
* Remove RateCalculator
* Refactor NextBus integration to use new API
This removes the `messages`, `directions`, and `attribution` attributes
from the sensor. Those may be added back in the future with additional
refactoring.
Some existing sensors may be broken today because of deprecated Agency
names. This patch will not migrate them as the migration path is
ambiguous. Setting up again should work though.
* Move result indexing outside of try/except
* Add Matter update entities for devices with OTA requestor
Matter devices which support the OTA requestor cluster can receive
updates from a OTA provider. The Home Assistant Python Matter Server
implements such an OTA provider now.
Add update entities for devices which support the OTA requestor cluster
and check for available updates. Allow the user to update the firmware.
The update progress will be read directly from the devices' OTA
requestor cluster.
* Update homeassistant/components/matter/update.py
Co-authored-by: TheJulianJES <TheJulianJES@users.noreply.github.com>
* Bump python-matter-server to 6.3.0
This includes models and commands required for device firmware updates.
* Fix tests by including the new bluetooth_enabled field
* Add update entity tests
* Fix update entity test
* Update entity picture docstring
* Add note about reasons for progress state change update
* Enable polling for update entities by default
Matter entities don't enable polling any longer. Enable polling for
update entities by default.
* Add comment about why Update entities are polled
---------
Co-authored-by: TheJulianJES <TheJulianJES@users.noreply.github.com>
* Integrate pypi libraray: pyblu
* Raise PlatformNotReady if _sync_status is not available yet
* Revert "Raise PlatformNotReady if _sync_status is not available yet"
This reverts commit a649a6bccd00cf16f80e40dc169ca8797ed3b6b2.
* Replace 'async with timeout' with parameter in library
* Set timeout back to 10 seconds
* ruff fixes
* Update homeassistant/components/bluesound/media_player.py
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
Matthias Alphart
David F. Mulcahey
Milan Meulemans
Richard Kroegel
Marcel van der Veldt
Alexey ALERT Rubashёff
Mr. Bubbles
danielsmyers
Louis Christ
starkillerOG
Bill Flood
Jafar Atili
J. Nick Koston
Joakim Plate
Andrew Jackson
Álvaro Fernández Rojas
SplicedNZ
Brett Adams
Robert Resch
Allen Porter
Philip Vanloo
Avi Miller
Alexandre CUER
Ian
Noah Husby
Marc Mueller
Michael Hansen
Stefan Agner
Franck Nijhof
cdnninja
Duco Sebel
Maciej Bieniek
epenet
GeoffAtHome
Joost Lekkerkerker