* Updated ISY component to not overwrite state_attributes.
The ISY component included an ISYDevice base class that is used by all
of the isy994 platforms. This still overwrote the state_attributes
property instead of the more appropriate device_state_attributes
property. This was also repeated in the isy994 light platform. Both of
these were addressed. This also fixes issue #5428.
* Removed custom state attributes from ISY lights.
The brightness attribute need not be manually reported by the isy994
light platform.
* Removed ISY Node cleanup.
The ISY entities don’t really need to unsubscribe themselves while hass
is shutting down. Because these updates are not sent in a thread, there
is no negative impact from shutting down without unsubscribing. This
greatly speeds up hass shutdown.
* Removed unused attribute from isy994 light platform.
* Cleaned up ISY994 light entity class.
1) Removed the state property. This property is set in the Entity base
class and shouldn’t be overridden here.
2) Set the brightness property. This is the proper way of setting the
brightness for the Light base class.
3) Removed properties that are now unused because of these changes.
GE sell a range of Bluetooth dimmer switches based on Avi-on technology.
Add a module for controlling them. There's also a set of smart switches that
speak the same protocol, but I don't have any of those to test support with.
* Initial commit of anthemav platform. It loads but has no purpose.
* Now presents a card in the UI but the values aren't real
* Mute and volume polling/setting work now
* Source lists and selection works now.
* Reduce debug logging verbosity
* Support power on/off and skip polling for details if power is off
* Add some static tables to decode numerics from telnet commands
* Add stub for unsupported media_play
* New style anthemav uses native asyncio structure
* Add device callback for asyncio
* This is ugly but it works
* Simplify async setup and abstract class data retrieval
* Implement commands (power on and power off for now)
* Add support for scan_interval and set default to 120 seconds
* Pass-through to package handlers for volume and input selection
* Slight restructuring to satisfy anthemav 0.9
* Load anthemav package from pypi now that it's registered
* Proper app_name from a/v info
* Mispelled word
* media_player/anthemav initial commit of platform requirements
* Philio 3-in-1 Gen 4 zwave sensor needs the no-off-event workaround. (#5120)
* Add print_config_parameter service to Z-Wave (#5121)
* Add print_config_param service to z-wave
* Add print_config_parameter service to z-wave
* Add print_config_parameter service to z-wave
* Fix typos
* Fix typos
* Fix typo
* Conform to Python/project style requirements
* Making pylint happy
* Bring pip requirements in agreement with the code
* Bungled previous update
* Remove unnecessady SCAN_INTERVAL logic
I was unawre that this is performed as part of the normal platform behavior and
it's unnecessary for a platform to independently implement this logic.
* Refactor code based on @armills PR requests
* Re-add media_play stub to avoid traceback
* Align with platform reqirements
* Remove references to SCAN_INTERVAL and clean up _lookup logic
* Add DEFAULT_PORT assignment
* Code style changes and removal of vestigial structures
* CONF_NAME handling changes to allow local override to default from device
* Address PR feedback from @balloob
* Remove media_play function override
It's no longer necesary for the platform to implement a stub media_play
function override now that the Add SUPPORT_PLAY flag #5181 issue has been
resolved and merged into the dev branch.
* Rename callback function to async_ for clarity
* Use async routines for platform methods
* Convert update callback to coroutine for conformity
Underlying anthemav library now properly supports coroutine callbacks instead
of normal functions. Converted the platform callback to a coroutine for
conformance with async operation for the device.
Special thanks to @pvizeli and @armills for their invaluable remedial Python
instruction!
* Further callback refinements
Altered the nature of callback handling based on suggestions from @pvizeli
* True not needed for local push update_ha_state
* Small style fix
After _control_heating() is executed, current_operation() is correctly called but _is_device_active() still reports the old state if the heater switch, at least in my case. The resulting climate state is incorrect until the next refresh, which apparently occurs only when _sensor_changed() gets called (it can be minutes after).
I think the state of the heater switch should be forced to update at the end of _control_heating(), but I don't know how to do that...
A simple sleep() fixes it, but obviously is just a temporary workaround, I'm not really expecting this PR to be actually committed, unless there's no other solution.
* Added tado device tracker
* Added tado device tracker to .converagerc
* Updated docs
* Code formatting and removed unused import
* Code formatting and removed unused import
* Respected the lint line length
* Respect pydocstyle rules
* Respect the lint line limit length
* Fixed reviewer feedback
* Changed the tracker to support async
* Respect the New line end of file rule
* Update .coveragerc
* Improved x10 state monitoring
* Improved x10 state monitoring
* Use update mthod to fetch state change
* Use update mthod to fetch state change
* Use update function to fetch status
* remove temp file
* Add doc string to update method
* denonavr: Expose input as title when in non playing modes
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denon: Pop from the intended end of the list
Pop from front of list, so we start with NSE0, then NSE1X and so on.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Don't provide broken media_url's
Only return a media_url if we're in a state that might provide one.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Only expose player support when in a player mode
This changes so the denonavr only exposes the media player support, when
in a mode that supports media playing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Add listing and selection of available MPD playlists through input source UI.
* MPD support updating playlist list on the fly as well as at turn-on.
* Added no_throttle to force playlist update on mpd power cycle.
* Added kwargs signature to get Throttle working right.
* Initial commit of discord notification component
* Fixed error where script added extra entries to .coveragerc
* Cleaned up code
* Compliance to PEP8
* removed dependencies
* readded dependencies
* changed name of client id to token for configuration
* Changes for Hound
* Incorporated Review Feedback
* Review feedback
* Updated requirements file
* Check compliance
* Introduced Amcrest camera sensors
* Makes script/gen_requirements_all.py happy
* Bump Amcrest version across all components
* - Adjusted scan_interval to 10 seconds
- Filtering HTTPError and ConnectTimeout exceptions
- Removed @Throttle decorator
Daniel Høyer Iversen
Fabian Affolter
Adam Mills
Ryan Kraus
Pascal Vizeli
happyleavesaoc
Paulus Schoutsen
HerrHofrat
Robbie Trencheny
Daniel Hoyer Iversen
Gianluca Barbaro
Matthew Garrett
David McNett
Touliloup
Alex
Bill Nelson
Whytey
R1chardTM
anpetrov
Johan Bloemberg
Job Vermeulen
martst
Giel Janssens
Anton Lundin
Nick Touran
Christiaan Blom
Marcelo Moreira de Mello
Jesse Newland
Tom Dickman