* Create repairs issue if an outdated currency code is configured
* Add script for updating list of currencies
* Use black for formatting
* Move currency codes to a separate file
* Address review comments
* Added initial files for air-Q integration
* Allow FIXME comments in pylint (temporary)
Also reintroduce --ignore-missing-annotations=y
* Set up air-q entry to connect to aioairq's API (initial attempt)
Also add necessary constants
* Implement a class for sensors and its update logic
Very early stage, WIP
* Zeroconf and authentication are working
* Complete the bare-bone minimal working version
Specifically, make AirQSensor update its values.
* Handle invalid authentication gracefully
* Handle ClientConnectionError gracefully
* Add field hint for the login form
The key in the schema, which defines the form in
`ConfigFlow.async_show_form` is looked up in both `airq/strings/json`
and `airq/translations/en.json`. I am still not 100% sure how this
lookup is performed. WIP
* Minor cleanups
* Extend sensor list to all supported by SensorDeviceClass
Also manage warming up sensors
* aioairq is published to PyPI and mentioned in requirements
* Reordered constants and list content alphabetically
As required by style guides. Also turned SENSOR_TYPES to a list
* Updated file docstrings for a dev unfamiliar w/homeassistant like myself
* Adding a bit of logging for the integration setup process
* Expose scan interval & smoothing flag
Also streamline test_authentication in config_flow.
* Fix a type annotation mistake
* Use as many constants from homeassistant.const as possible
My only concern is using CONST_IP_ADDRESS = "ip_address" for smth which
stands for both IP address and mDNS...
* Temporarily rollback ConfigFlow.async_step_configure and use defaults
TODO: implement OptionFlowHandler instead
* Define custom Coordinator, w subset of airq config
The latter is then accessed from entity / sensor constructors to define
correct DeviceInfo
* Provide translations to de & fr + minor changes to en
* Provide translations to ru + a minor en changes
* Make translation a little more helpful and polite
* Fix devicename and entry title
* Remove stale commented out code
* Test config_flow
At this point two helper functions which interact with the external
library are not tested
* Clean up unrelated and meant as temporary changes
* Clean up unnecessary comments meant for internal use
* Move fetching config to a dedicated async coordinator method
As opposed to it being a potentially poorly justified step in
async_setup_entry
* Remove zeroconf support since it is not yet ready
* Remove translations other than en
* Remove unnecessary comments, manifest.json entries, and constants
* Improve exception handling
- `_LOGGER` uses `debug` and not `error` levels.
- Drop `ClientConnect` and catch `aiohttop.ClientConnectError` directly
- Drop `Exception` as it is not expected from `aioairq` (remove the
corresponding test too)
* Drop strings for obsolete errors and steps
Specifically, `unknown` error isn't caught any more. `configure` step
has also been removed.
* Refactor en.json to be consistent with strings.json
* Move target_route from a coordinator argument to a constant
At this point a user cannot configure the target_route route, thus it
does not make sense to expose it half-heartedly in
`AirQCoordinator.__init__`, since it cannot be accessed.
* Fix an async call in `AirQCoordinator.async_setup_entry`
* Refactor underlying aioairq API
- Use `homeassistant.helpers.aiohttp.async_get_clientsession` and pass a
single persistent session to `aioariq.AirQ.__init__`
- `aioairq.AirQ.fetch_device_info` now returns a `DeviceInfo` object heavily
inspired and almost compatible with `homeassistant.helpers.entity.DeviceInfo`.
Make heavier use of this object and define a single `DeviceInfo` in the
`AirQCoordinator` (instead of recreating the same object for each sensor
of the device in `sensor.AirQSensor`)
- Drop two helper functions in `config_flow.py` and operate on `aioariq.AirQ`
methods directly
* Fix the version of aioairq
* Add 15 more sensors + icons
* Remove cnt* & TypPS, change units of health & performance
* Add 12 more sensors
* Add a missing icon
* Gracefully handle device not being available on setup
If the device and the host are not on the same WiFi,
ServerTimeoutError is raised, which is caught by
ClientConnectionError.
If the device is powered off, ClientConnectionError is expected.
In both cases, ConfigEntryNotReady is raised, as prescribed by the docs.
Newer version of aioairq times-out far quicker than the default 5 mins.
* Rename two sensors
* Validate provided IP address / mDNS
aioairq now raises InvalidInput if provided IP / mDNS does not seem
valid. Handle this exception correctly
* Apply suggestions from code review
Clean up the comments and rename the logger
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during the first refresh
- Fetched info is stored in AirQCoordinator.device_info.
- In `AirQSensor.native_value` only multiply by the factor if
the sensor reading is not None
- Fix the tests for ConfigFlow for aioairq==0.2.3. Specifically
make the dummy data pass the new validation step upstream
+ add a test which fails it
* Drop custom device classes for now
* Apply suggestions from code review
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during ConfigFlow.async_step_user
Store the result obtained by `airq.fetch_device_info` it in
`config_entry.data`. Pass the entire config entry to `AirQCoordinator`
and build the entire `homeassistant.helpers.entity.DeviceInfo` in the
`AirQCoordinator.__init__`. This makes
`AirQCoordinator._async_fetch_device_info` and overloaded
`AirQCoordinator._async_config_entry_first_refresh` obsolete.
Bump aioairq version.
Turn update_interval from `AirQCoordinator.__init__` argument into a
contestant.
* Custom entity description exposing a hook to modify sensor value
Use a `AirQEntityDescription` with a callable `value_fn` which allows to
change the sensor value retrieved from the device. Note that the
callable does not handle data retrieval itself (even from
`coordinator.data`). Instead it is purely a hook to transform obtained
value.
* Avoid duplicated use of unique_id
Device info is fetched during the `ConfigFlow.async_user_step`.
`unique_id` is taken from the device info and is **not** stored
in `config_entry.data`. Subsequently `config_entry.unique_id` is
used instead.
* Drop unnecessary try-except
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Clarify the use of value_transform_fn
* Refactor the use of lambdas in AirQEntityDescription
Now it is the job of the callable under `value` to get the sensor
reading from the coordinator's data. Factoring this functionality into a
callback decouples the key of the description from the key of dict,
returned by the API, so `AirQEntityDescription` no longer requires its key
to be set to smth clearly internal (e.g. `nh3_MR100`).
* Use a callback to update native_value
Since all `native_value`s are updated synchronously, it can as well be
done in a callback for better state consistency (right?)
* Revert the description keys to match data keys
Must match given the current way of identifying available sensors. On a
broader scale, they must match to be able to relate the descriptions to
sensors, unless a separate lookup table is maintained.
* Reduce number of loops when adding sensors
Filtering warming up sensors and non-sensor keys can be combined with
adding entities.
* Remove obsolete imports
* Update integrations.json
* Add integration_type
Integration supports multiple devices => hub
Co-authored-by: dl2080 <daniel.lehmann@runbox.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
Co-authored-by: Daniel Lehmann <43613560+dl2080@users.noreply.github.com>
Co-authored-by: Martin Selbmann <job@martin-selbmann.de>
* mapping
* update
* working
* tests
* fixes
* temp add binary sensor platform to make sure it works
* fixes
* 100% cover
* adjust
* disable chatty sensors by default
* remove binary sensor_platform for next PR
* time is much nicer than counter
* Add Config Flow to APCUPSd integration and remove YAML support.
* Hide the binary sensor if user does not select STATFLAG resource.
* Add tests for config flows.
* Simplify config flow code.
* Spell fix.
* Fix pylint warnings.
* Simplify the code for config flow.
* First attempt to implement import flows to suppport legacy YAML configurations.
* Remove unnecessary log calls.
* Wrap synchronous update call with `hass.async_add_executor_job`.
* Import the YAML configurations when sensor platform is set up.
* Move the logger call since the variables are not properly set up.
* Add codeowner.
* Fix name field of manifest.json.
* Fix linting issue.
* Fix incorrect dependency due to incorrect rebase.
* Update codeowner and config flows via hassfest.
* Postpone the deprecation warning to 2022.7.
* Import future annotations for init file.
* Add an newline at the end to make prettier happy.
* Update github id.
* Add type hints for return types of steps in config flow.
* Move the deprecation date for YAML config to 2022.12.
* Update according to reviews.
* Use async_forward_entry_setups.
* Add helper properties to `APCUPSdData` class.
* Add device_info for binary sensor.
* Simplify config flow.
* Remove options flow strings.
* update the tests according to the changes.
* Add `entity_registry_enabled_default` to entities and use imported CONF_RESOURCES to disable entities instead of skipping them.
* Update according to reviews.
* Do not use model of the UPS as the title for the integration.
Instead, simply use "APCUPSd" as the integration title and let the device info serve as title for each device instead.
* Change schema to be a global variable.
* Add more comments.
* Rewrite the tests for config flows.
* Fix enabled_by_default.
* Show friendly titles in the integration.
* Add import check in `async_setup_platform` to avoid importing in sensor platform setup.
* Add import check in `async_setup_platform` to avoid importing in sensor platform setup.
* Update comments in test files.
* Use parametrize instead of manually iterating different test cases.
* Swap the order of the platform constants.
* Avoid using broad exceptions.
* Set up device info via `_attr_device_info`.
* Remove unrelated test in `test_config_flow`.
* Use `DeviceInfo` instead of dict to assign to `_attr_device_info`.
* Add english translation.
* Add `async_create_issue` for deprecated YAML configuration.
* Enable UPS status by default since it could show "online, charging, on battery etc" which is meaningful for all users.
* Apply suggestions from code review
* Apply suggestion
* Apply suggestion
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Add nibe local integration
* Add sensor platform
* Enable sensor platform
* Fix manifest
* Correct domain after rename
* Adjust tests for rename
* Correct codeowners
* Add requirements for tests
* Grab coil by name
* Switch to home assistant error
* Config entry always exist
* Switch to create task
* Bump to 0.5.0
* Use new coils access
* Remove unneeded check
* Use single instance of logger
* Test invalid ip
* Don't allow coil to be None
* Remove sleep
* Initialize data in coordinator init
* Add utils to ignore
* Update homeassistant/components/nibe_heatpump/manifest.json
Co-authored-by: J. Nick Koston <nick@koston.org>
* Use generator instead
* Use tenacity as retry decorator
* Use package instead of name to get logger
* Skip broad exception handling
* Catch missing coil exception
* Add missing test
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add SwitchBee Integration
* fixes
* improved API and more logs
* fixed test_config_flow code
* removed light and cover
* Fixed CR comments, updated pylib, improved response time and lowered the scan interval for lower latency
* CR fixes, added advanced setup form to let the
user choose the following:
- scan interval in seconds: default 5
- whether to expose scenarios and group switches from the CU or not
* used SCAN_INTERVAL_SEC instead of typing just the number
* Fixed PR comments, added unit tests
* fixes
* Improved the pypi and updated the code accordingly
* Add SwitchBee Integration
* fixes
* improved API and more logs
* fixed test_config_flow code
* removed light and cover
* Fixed CR comments, updated pylib, improved response time and lowered the scan interval for lower latency
* CR fixes, added advanced setup form to let the
user choose the following:
- scan interval in seconds: default 5
- whether to expose scenarios and group switches from the CU or not
* used SCAN_INTERVAL_SEC instead of typing just the number
* Fixed PR comments, added unit tests
* fixes
* Improved the pypi and updated the code accordingly
* fixes
* restored new line in .coveragerc
* test: increased config_flow test coverage
* removed two way type
* Updated CODEOWNERS
* fix: code review comments
* fixed review comments
* added device_info
* moved device info to attribute
* Bump thermopro-ble to 0.4.2
- Turns on rounding of long values
- Uses bluetooth-data-tools under the hood
- Adds the TP393 since it works without any changes to the parser
Changelog: https://github.com/Bluetooth-Devices/thermopro-ble/compare/v0.4.0...v0.4.2
* bump again for device detection fix
* Initial version of Nobø Ecohub.
* Options update listener for Nobø Ecohub
* Unit test for nobo_hub config flow
* Cleanup
* Moved comment re backwards compatibility
* Improved tests
* Improved tests
* Options flow test
Pylint
* Fix backwards compatibility mode
* Don't require Python 3.9
* Import form configuration.yaml
* Check if device is already configured.
Correct tests for only discovering serial prefix
Fix importing when only serial suffix is configured
* Use constants
* Pylint and variable name clenaup.
* Review
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Fix tests
* Correct disabling off_command and on_commands ("Default" is a hard coded week profile in the hub).
* Improve options dialog
* Configure override type in options dialog
* Formatting
* pyupgrade
* Incorporated review comments
* Incorporated review comments.
* Incorporated second round of review comments.
* Add polling to discover preset change in HVAC_MODE_AUTO.
* Added tests/components/nobo_hub to CODEOWNERS.
* Update homeassistant/components/nobo_hub/config_flow.py
Review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Update homeassistant/components/nobo_hub/climate.py
Review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Simplify if tests.
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Separate config step for manual configuration.
* Fixed indentation
* Made async_set_temperature more robust
* Thermometer supports tenths even though thermostat is in ones.
* Preserve serial suffix in config dialog on error.
* Initial version of Nobø Ecohub.
* Improved tests
* Review
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Configure override type in options dialog
* Separate config step for manual configuration.
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Formatting (prettier)
* Fix HA stop listener.
* Review
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Review
- Removed workaround to support "OFF" setting.
- Simplified config flow to add a new device.
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fixed review comments
* Update en.json with correction in review.
* Implemented review comments:
- Register devices
- Simplifed async_set_temperature
* Register hub as device in init module
* Implemented review comments.
Upgraded pynobo to 1.4.0.
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Avoid tacking on the device name in the entity name
* Inherit entity name from device name
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Allen Porter <allen.porter@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add BThome BLE
* Update BThome to latest version
* 0.3.4
* Rename to bthome 2
* Fix uuids not being found
* Make energy a total increasing state class
* Change unit of measurement of VOC
* Use short identifier
* Fix the reauth flow
* Bump bthome_ble
* Parameterize sensor tests
* Remove Move function to parameter
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* refactor volvooncall to use ConfigFlow
* remove unused constant SIGNAL_STATE_UPDATED
* implemented feedback
* improve ConfigFlow UX by giving an option for region=None
* implemented more feedback
* next round of feedback
* implemented more feedback
* improve test coverage
* more test coverage
* Apply suggestions from code review
* implemented feedback on tests
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add Landis+Gyr Heat Meter integration
* Add contant for better sensor config
* Add test for init
* Refactor some of the PR suggestions in config_flow
* Apply small fix
* Correct total_increasing to total
* Add test for restore state
* Add MWh entity that can be added as gas on the energy dashoard
* Remove GJ as unit
* Round MWh to 5 iso 3 digits
* Update homeassistant/components/landisgyr_heat_meter/const.py
* Update CODEOWNERS
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add bluetooth discovery
* Use home assistant standard api
* Fixup manufacture data
* Adjust config flow to use standard features
* Fixup tests
* Mock bluetooth
* Simplify device check
* Fix missing typing
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add new LaCrosse View integration
* Add new LaCrosse View integration
* Add retry logic
* Actually use the start time for the retry logic
* Get new token after 1 hour
* Replace retry logic with more reliable logic
* Improve test coverage
* Add device info and unique id to config entry
* Fix manufacturer name
* Improve token refresh and check sensor permission
* Improve test cover
* Add LaCrosse View to .strict-typing
* Remove empty fields in manifest.json
* Fix mypy
* Add retry logic for get_data
* Add missing break statement in retry decorator
* Fix requirements
* Finish suggestions by Allen Porter
* Suggestions by Allen Porter
* Fix typing issues with calls to get_locations and get_sensors
* Add Govee BLE integration
* add missing files
* remove test file not needed yet
* fix
* add bbq sensors
* fixed lib
* bump again to fix the names
* fix discovery of the newer bbq devices
* fix the test to test the right thing
* verify no outstanding flows
* only accept entities that match the platform
* refactor
* refactor
* refactor
* Refactor PassiveBluetoothDataUpdateCoordinator to support multiple platforms
* cover
* Update for new model
* Update for new model
* Update tests/components/govee_ble/test_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* purge dead code
* backmerge from integration
* Update docstring
* Update docstring
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial xiaomi_ble integration
* black
* Update homeassistant/components/xiaomi_ble/config_flow.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Update homeassistant/components/xiaomi_ble/config_flow.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Apply suggestions from code review
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Update tests/components/xiaomi_ble/test_config_flow.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Update homeassistant/components/xiaomi_ble/sensor.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Update tests/components/xiaomi_ble/test_config_flow.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Remove debug code
* Need 'proper' MAC when running tests on linux
* Need to use proper MAC so validation passes
* Add tests for already_in_progress and already_configured
* copy test, add session fixture
* fix test
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* ESPHome use dhcp responses to update connection host of known devices
* Add test for dhcp
* Add another test to cover when there are no changes required
* Add config flow to AnthemAV integration
* Add importing of existing configuration
* Change setting to optional and add default value
* Use entity attribute
* Reduce changes by removing additional media player properties
* Remove title from translation
* Refactor config flow and fix PR comments
* Fix a failing test because of wrong renaming
* Add typing and use existing class and enum
* Bump dependency to v1.3.1
* Remove unecessary async_reload_entry
* Fix requirements_test_all after rebase
* Add const for timeout and remove async_block in test
* Reapply CodeOwner and configflow after rebase
* Remove name from configflow
* Fix manifest prettier failure
* Simplify code and avoid catching broad exception
* Removed unused strings and translations
* Avoid asserting hass.data
* Update the nest integration to be useable fully from the config flow
* Support discovery in nest config flow
* Remove configuration entries
* Remove unused import
* Remove dead code
* Update homeassistant/components/nest/strings.json
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Remove commented out code
* Use config flow for app auth reauthentication path
* Improves for re-auth for upgrading existing project and creds
* More dead code removal
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Remove outdated code
* Update homeassistant/components/nest/config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add config flow to eight_sleep
* simplify tests
* Remove extra file
* remove unused import
* fix redundant code
* Update homeassistant/components/eight_sleep/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* incorporate feedback
* Review comments
* remove typing from tests
* Fix based on changes
* Fix requirements
* Remove stale comment
* Fix tests
* Reverse the flow and force the config entry to reconnect
* Review comments
* Abort if import flow fails
* Split import and user logic
* Fix error
Co-authored-by: J. Nick Koston <nick@koston.org>
* fixing after MartinHjelmare review
* fixing after MartinHjelmare review conversion alarm state to hass state
* fixing after MartinHjelmare review conversion alarm state to hass state
* manage the status in the alarm control
* simplyfing return function
* Removing iAlarm XR integration because of Antifurto365 explicit request to remove after some issues in their cloud service
* Change to new package and tcp
* Rework integration pt1
* Show by default
* Handle auth error
* Use const
* New version avaliable (to be replaced in future by update entity)
* Remove visible
* Version latest
* Filesystem space use
* Dev package
* Fix sensor
* Add services
* Update package
* Add temperature and voltage
* GPU
* Bump package version
* Update config flow
* Add displays
* Fix displays connected
* Round to whole number
* GPU fan speed in RPM
* Handle disconnections
* Update package
* Fix
* Update tests
* Handle more errors
* Check submodule and return missing uuid in test
* Handle auth error on config flow
* Fix test
* Bump package version
* Handle key errors
* Update package to release version
* Client session in config flow
* Log
* Increase timeout and use similar logic in config flow to init
* 30 secs
* Add test for timeout error
* Cleanup logs
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/system_bridge/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* uuid raise specific error
* Type
* Lambda to functions for complex logic
* Unknown error test
* Bump package to 3.0.5
* Bump package to 3.0.6
* Use typings from package and pydantic
* Use dict()
* Use data listener function and map to models
* Use passed module handler
* Use lists from models
* Update to 3.1.0
* Update coordinator to use passed module
* Improve coordinator
* Add debug
* Bump package and avaliable -> available
* Add version check
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* First version of laundrify integration
* Code cleanup
* Code cleanup after review #2
* Move coordinator to its own file
* Save devices as dict and implement available prop as fn
* Validate token on init, abort if already configured
* Some more cleanup after review
* Add strict type hints
* Minor changes after code review
* Remove OptionsFlow (use default poll interval instead)
* Fix CODEOWNERS to pass hassfest job
* Fix formatting to pass prettier job
* Fix mypy typing error
* Update internal device property after fetching data
* Call parental update handler and remove obsolete code
* Add coordinator tests and fix some config flow tests
* Refactor tests
* Refactor fixtures
* Device unavailable if polling fails
* Add ConfigFlow for here_travel_time
* Use Selectors and Menu
* Use separate config flow steps for menus
* Move time options together
* Update homeassistant/components/here_travel_time/config_flow.py
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Blacken config_flow
* Initialize _config
* Only catch HERE errors
* Fix unknown error test
* Implement async_step_import
* Only catch errors for validate_api_key
* Split lat/lon
* Add additional test coverage
* Use TimeSelector in option flow
* Assert config entry data/option
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Add google application_credentials platform
* Further simplify custom auth implementation overrides
* Add test coverage in application_credentials
* Simplify wording in a comment
* Remove unused imports accidentally left from merge
* Wrap lines that are too long for style guide
* Move application credential loading to only where it is needed
* Leave CLIENT_ID and CLIENT_SECRET as required.
* Adding flow and async
* Fixes to init
* Lint and type
* Fixed coveragerc file
* Added Test Coverage
* Added Update Listener and removed unused code
* Wrong integration name in init.
* Nothing
* Added yaml import flow
* Added YAML import functionality
* Added back aladdin_connect files to coverage rc
* Removed commented code
* Clean up error message
* Update homeassistant/components/aladdin_connect/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/aladdin_connect/__init__.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Update homeassistant/components/aladdin_connect/config_flow.py
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
* Updated Documentation errors
* recommended change broke cover.py - backed out
* Cleaned up unused defenitions
* implimented recommended changes from gjohansson
* Dev environment cleanup
* Raised errors for better recovery, replaced removed update files, utilized PLATFORM vars to init platform
* Added back removal
* Added Code Owner
* Fixed more comment errors and import duplicates
* Added test coverage and formated code
* Added test coverage for model and init
* Added test_cover for full testing coverage
* Added await to async call
* Added missing asserts to failure tests
* Updated tranlsation
* Fixed wording in yaml import function, white space in const.py, return from validate_input.
* Update homeassistant/components/aladdin_connect/config_flow.py
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* "too much" whitespace
* Added back mising strings.json errors
* Added ConfigFlowReconfig and tests
* Finished up reauth config flow and associated tests
* Added reauth to strings, removed username from reauth
* recommended changes, ran script.translations, added auth test to reauth
* put back self.entry.data unpack.
* Cleanup for error message, fixed missing "asserts" in tests
* Added yaml import assertions
* Fixed documentation errors in test_cover.
* remove unused string.
* revised tests and wording for yaml import
* Documentation cleanup.
* Changed sideeffect names
Co-authored-by: G Johansson <goran.johansson@shiftit.se>
Co-authored-by: Robert Svensson <Kane610@users.noreply.github.com>
* Add ws66i core integration
* Remove all ws66i translations
* Update ws66i unit tests to meet minimum code coverage
* Update ws66i based on @bdraco review
* General improvements after 2nd PR review
* Disable entities if amp shutoff, set default source names, set 30sec polling
* Add _attr_ and change async_on_unload
* Improve entity generation
* Implement coordinator
* Made options fields required, retry connection on failed attempts, use ZoneStatus for attributes
* Refactor WS66i entity properties, raise HomeAssistantError on restore service if no snapshot
* Update to pyws66i v1.1
* Add quality scale of silver to manifest
* Update config_flow test
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Initial developer credentials scaffolding
- Support websocket list/add/delete
- Add developer credentials protocol from yaml config
- Handle OAuth credential registration and de-registration
- Tests for websocket and integration based registration
* Fix pydoc text
* Remove translations and update owners
* Update homeassistant/components/developer_credentials/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/developer_credentials/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Remove _async_get_developer_credential
* Rename to application credentials platform
* Fix race condition and add import support
* Increase code coverage (92%)
* Increase test coverage 93%
* Increase test coverage (94%)
* Increase test coverage (97%)
* Increase test covearge (98%)
* Increase test coverage (99%)
* Increase test coverage (100%)
* Remove http router frozen comment
* Remove auth domain override on import
* Remove debug statement
* Don't import the same client id multiple times
* Add auth dependency for local oauth implementation
* Revert older oauth2 changes from merge
* Update homeassistant/components/application_credentials/__init__.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Move config credential import to its own fixture
* Override the mock_application_credentials_integration fixture instead per test
* Update application credentials
* Add dictionary typing
* Use f-strings as per feedback
* Add additional structure needed for an MVP application credential
Add additional structure needed for an MVP, including a target
component Xbox
* Add websocket to list supported integrations for frontend selector
* Application credentials config
* Import xbox credentials
* Remove unnecessary async calls
* Update script/hassfest/application_credentials.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update script/hassfest/application_credentials.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update script/hassfest/application_credentials.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update script/hassfest/application_credentials.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Import credentials with a fixed auth domain
Resolve an issue with compatibility of exisiting config entries when importing
client credentials
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Malte Franken
Erik Montnemery
Robert Hillis
puddly
Mick Vleeshouwer
StefanIacobLivisi
Renat Sibgatulin
Rami Mosleh
Aidan Timson
aschmitz
G Johansson
epenet
Steven Looman
Daniel Gangl
Marc Mueller
Raman Gupta
Aaron Bach
Franck Nijhof
Bram Kragten
hackerESQ
J. Nick Koston
Simon Hansen
Kevin Addeman
Chris Talkington
Steven Hosking
Guido Schmitz
Maciej Bieniek
Paulus Schoutsen
Robert Svensson
Lén
Austin Brunkhorst
starkillerOG
spycle
Brandon Rothweiler
Glenn Waters
Jafar Atili
Tobias Sauerwein
Zack Barett
Vincent Giorgi
uvjustin
Yuxin Wang
Tom Puttemans
Joakim Plate
Artem Draft
Ernst Klamer
Radu
Alex Thompson
Øyvind Matheson Wergeland
Pascal Vizeli
Justin Vanderhooft
guozi7788
y34hbuddy
Vincent Knoop Pathuis
Charles Garwood
Zach Berger
Koen van Zuijlen
Laz
Martin Hjelmare
Jc2k
IceBotYT
Allen Porter
Stefan Rado
Jesse Hills
MasonCrawford
Alex Henry
henryptung
Álvaro Fernández Rojas
Allen Porter
Thibaut
Dave T
BigMoby
xLarry
Kevin Stillhammer
Matrix
mkmer
Rudolf Offereins
Fairesoimeme
Shawn Saenger
Paul Annekov