* specify rtsp_transport for onvif camera
* remove used variable
* Update homeassistant/components/stream/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* change options to stream_options
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Adding support for PTZ move modes
Adding support for other PTZ move modes.
Onvif intergration used to only support RelativeMove where it should also supports AbsoluteMove, ContinuousMove and Stop.
For exemple Goke GK7102 based IP camera only support ContinuousMove mode.
This commit add those new modes with avaibility to select mode and params in service call.
* Adding support for PTZ move modes
Adding support for other PTZ move modes.
Onvif intergration used to only support RelativeMove where it should also supports AbsoluteMove, ContinuousMove and Stop.
For exemple Goke GK7102 based IP camera only support ContinuousMove mode.
Update service helper for new avaibility to select mode and params in service call.
* RelativeMode as default move_mode to avoid breakchange
RelativeMode as default move_mode to avoid breakchange
* add missing attribute
add missing continuous_duration attribute
* change service attribute label for continuous_duration
* update description
fix wrong assertion for move_mode attr description
* Update services.yaml
* Update services.yaml
fix wrong wording for move_mode
* Update camera.py
Using defined constants instead of raw strings in conditions
* Update camera.py
Replace integer to floating point in logger debug PTZ values
* Update services.yaml
* Update services.yaml
* Update camera.py
* Update camera.py
* use dict[key] for required schema keys and keys with default schema values
* remove async for setup_ptz method
* lint error
* remove unecessary PTZ_NONE = "NONE"
changed request by @MartinHjelmare
* addressing @ MartinHjelmare comments
- Remove None in defaluts and dicts
- Replace long if blocks
* remove NONE
* lint issue
* Update camera.py
* Fix lint error - typo
* rename onvif_ptz service to just ptz
* rename onvif_ptz service to just ptz
* use dict[key] when default values are set
use service.data[key] instead of service.data.get[key] when default value is set in service schema
* adresse comment: use dict[key] for pan tilt zoom
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* add app support
* code cleanup, add additional test, add CONF_APPS storage logic for import
* simplify schema defaults logic
* remove unnecessary lower() and fix docstring
* remove default return for popping CONF_APPS during import update because we know entry data has CONF_APPS due to if statement
* further simplification
* even more simplification
* fix type hints
* move app configuration to separate step, fix tests, and only make app updates if device_type == tv
* remove errors variable from tv_apps and move tv_apps schema out of ConfigFlow for consistency
* slight refactor
* remove unused error from strings.json
* set unique id as early as possible
* correct which dictionary to use to set unique id in pair_tv step
* Returns an unencrypted location of all persons with device trackers
* Handle encrypted messages and exclude the poster's location
* Friends is by default False. Reformats with Black
* Updates the context init to account for the Friends option
* Fix Linter error
* Remove as a config option
* No longer imports encyrption-related functions in encrypt_message
* Fix initialization in test
* Test the friends functionality
* Bugfix for persons not having a location
* Better way to return the timestamp
* Update homeassistant/components/owntracks/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Linting and tid generation
* Fix test
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* bugfix: correctly handle non-UTC TZs
* bugfix: system mode is always permanent
* bugfix: handle where until is none
* tweak: improve logging to support above fixes
* Fetch iCloud devices again if the status is pending
* Remove "No iCloud device found" double check
* fix default api_devices value
* Remove useless unitialisation declarations
* added presets for switch devices
* added channel type to __init and const
* ran pylint on library so needed a few changes in names
* removed callback
* bool -> cv.boolean
* Add attribute
latest release tag
* add attrs =
and only create attr Tag if exists
made requested changes
* change condition for _latest_release_tag
to use self._github_data.latest_release_url
* Correct changes
* Update sensor.py
* blackify
* Emoncms API provides a Unit
The EmonCMS API has been amended to include a 'unit' as part of it's payload. By using this information, all the sensors can be created without the need for individual sensors to be setup by type.
The change is backward compatible so if a unit type has been specified in the configuration, this will be used by default.
If no unit is pecified either by the Home Assistant configuration, or the Emoncms API, then the default of W will be used as before.
* Update sensor.py
Check the 'unit' key is in the API call. Older systems may not have that key in the payload.
* Modified approach with new configuration item
* Removed new config item
Removed the configuration item. The integration attempts to get the unit from the API.
If this fails *or* the unit key of the API is blank, either the specified unit, or the default will be used.
If approved, documentation will be updated.
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Apply suggestions from code review
* Apply suggestions from code review v2
* Update homeassistant/components/emoncms/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update sensor.py
Update `config_unit`
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* [soundtouch] workaround for API bug when removing multiple slaves from a zone at once
* [soundtouch] added additional attributes exposing multiroom zone info
* Fix update with slave entities
* Add zone attributes test
* Fix and clean up tests
* Fix typo
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add edl21 component for SML-based smart meters
* edl21: Remove unused variable
* [edl21] Add 1 minute throttle to the sensor
* Update homeassistant/components/edl21/manifest.json
Fix documentation URL
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* edl21: Move imports to top
* edl21: Remove special case for STATE_UNKNOWN, which replicated default behavior
* edl21: Implement blacklist for and warn about unhandled OBIS values
* edl21: Make blacklist global
* edl21: Add filter to issues URL
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* edl21: Rename device to entity
* edl21: Don't schedule async_add_entities
* edl21: Use dispatcher, implement own throttling mechanism
* edl21: Simplify keeping track of known obis
* edl21: Use whitelist for state attributes
* edl21: Remove dispatcher on shutdown
* edl21: Convert state attributes to snakecase
* edl21: Annotate handle_telegram with @callback
* edl21: Call async_write_ha_state instead of schedule_update_ha_state
Co-authored-by: David Straub <straub@protonmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Allow string values on zwave.set_node_value
This allows for:
* Accessing longer value_ids. In some cases, value ids in z-wave nodes are very large (17 digits in my case). Passing them as int does not seem to work well (python probably truncates the number), but passing them as string works fine
* Changing color values, which are represented as hex string
reformat test
* update services.yaml with string set_node_value
The documentation for google_travel_time was at odds with the
implementation. The documentation stated a default scan time of
5 minutes, but the implementation was using Throttle which resulted
in the sensor updating at a maximum rate of one API call every
5 minutes. This was especially at odds with a given example at
the end of the documentation, which showed updating the sensor
every 2 minutes during commute times.
This change brings the implementation in line with the docs by
adopting the `SCAN_INTERVAL` constant set to the stated default
of 5 minutes and removing the Throttle.
* Update image_processing.py
Adds save timestamp file and adds last_detection attribute
* Update test_image_processing.py
Adds test
* Adds assert pil_img.save.call_args
* Test timestamp filename
* Add test bad data
* Update test_image_processing.py
* Fix bad image data test
* Update homeassistant/components/sighthound/image_processing.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Reduce log level for initial error and bump library version
* Use new buienradar library version which reduces the log level
for some types of warnings.
* Initially logs at a lower level and only logs at WARN for repeated
errors.
This should serve to reduce confusion with users such as in
issue #32301.
* Fix linter error with new linter settings.
* Fix linter warning
* Update homeassistant/components/buienradar/util.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* code quality improvements
* code quality improvements and fixed tests
* explicitly set unique ids
* improve unique id creation
* remove entities from entity registry
* added test for removing entities from entity registry
* revert entity registry handling from sensor and test code
* check for entity registry removal in geolocation test case
* make import absolute; isort
* change quality scale
Rami Mosleh
Bram Kragten
Jc2k
olijouve
Chris Talkington
Josef Schlehofer
Paulus Schoutsen
David F. Mulcahey
David Bonnes
Ville Skyttä
Quentame
Alexei Chetroi
springstan
Daniel Høyer Iversen
Pascal Vizeli
Martin Hjelmare
HomeAssistant Azure