* Add support for LaunchRequest alexa intent
* Support LaunchRequest for multiple skills
* formatting
* adding tests to cover launch request
* formatting
* Honeywell fixes and improvements
Give the Honeywell device a state ('On', 'Off', etc) that
can be displayed to user and understood by other components.
Previously this was always 'Unknown'. Update also raises a
state_changed event when a new temperature is polled.
These two together fix an issue (#8688) where Honeywell
climate data couldn't be logged in InfluxDB.
* Roll back some changes
These were not necessary to achieve the result I wanted.
* Renamed RoundThermostat's 'device' member for greater clarity
Now called 'client'
* Improve and simplify discovering thermostat mode
Per code review, this is a rather neater way to discover the thermostat mode
* Update tests for compatibility with new component
The tests previously relied upon the update() method being
called in the constructor. This is no longer the case.
* Address formatting review comment
Parens not necessary
* This system mode is not certain to apply to domestic hot water
Moved the mode lookup to only happen on update of radiator devices,
since hot water devices seem to be treated differently and I can't test.
* Clean up remote component
* Don't have device be required in send_command service and method.
* Don't have entity_id be required in the base service schema.
* Don't always add activity in the data dict for a service call.
* Update harmony remote platform according to new service schema.
* Remove not needed properties and attributes from the Kira remote
platform.
* Add send_command method to demo platform.
* Add tests and remove duplicate tests.
* Break out required argument as positional argument
* Fixed issue with routers in bridge mode
- Router in brdige mode apparently don't report all of the stats
- Re-wrote the data_format function so it's a bit easier to follow and able to log keys that aren't supported by a router in a given mode
- Changed config so that it properly ignores conditions when not explicitly listed
- Added tests to check for the above and also to verify we log that a key doesn't exist rather than throwing an exception
* Mistakenly was calling MONITORED_CONDITIONS in data_format
- Changed to be the actual config values to prevent log error
* Update zwave.py to work with updated OpenZwave library
Update zwave.py to work with updated OpenZwave library
* Update zwave.py
* Update zwave.py
* Update to fix garage door openers
Update to fix garage door support for latest version of openzwavelib
* Update to cover.zwave list of states
Update to cover.zwave to provide list of states based on dev version of
openzwave lib
* Some values not saved
* Formatting fix
* Formatting fix
* Variable typo
* Formatting fix
* Formatting
* Variable Update
Variable Update and properties added
* Formatting fixes
* Formatting Fix
* Update test case for door states
* Formatting / Testing process fix
* Formatting
* Formatting / Test Fixes
* Variable rename
* Added members to CoverDevice
* Removed un-needed else
* Formatting
* Formatting
* Variable name changes and const updates
* Changed variable names to cover_state
* Added constains into const.py
* Updated to change the main state on the cover device
* Fixes
* Formatting fixes
* Formatting/Variables
* Formatting
* Variable fixes
* Import update
* Formatting / Variables
* Update test for new states
* Revert state changes
* Test fix
* Variable Fix
* Formatting
* Variable typo
* Missing constant
* Variable fix
* Requested changes
* Added is_opening
* Added is_closing
* Updated test based on changes
* Formatting
* Changed cover_state back to _state
* Formatting and variable fixes
* Test fixes
* Formatting and variable touchup
* Formatting
* Optimizations
* Add new cover features to demo
* Add tests for demo cover closing/opening
* Remove unused STATE_STOPPED
* Add tests for new zwave cover values
* Manual alarm with MQTT control
* Duplicate manual control panel code instead of extending it
* Duplicate manual alarm test as well; modify for manual_mqtt
* Add MQTT-specific tests for manual_mqtt alarm
* Add intent component
* Add intent script component
* Add shopping list component
* Convert Snips to use intent component
* Convert Alexa to use intent component
* Lint
* Fix Alexa tests
* Update snips test
* Add intent support to conversation
* Add API to view shopping list contents
* Lint
* Fix demo test
* Lint
* lint
* Remove type from slot schema
* Add dependency to conversation
* Move intent to be a helper
* Fix conversation
* Clean up intent helper
* Fix Alexa
* Snips to use new hass.components
* Allow registering intents with conversation at any point in time
* Shopping list to register sentences
* Add HTTP endpoint to Conversation
* Add async action option to intent_script
* Update API.ai to use intents
* Cleanup Alexa
* Shopping list component to register built-in panel
* Rename shopping list intent to inlude Hass name
* Enhance python_script to support "_getitem_"
In order to use dict / list structures in python scripts we need
_getitem_ allowed in the RestrictedPython environment. There is a
default_guarded_getitem included with RestrictedPython, which is a
pass through used in the Eval code paths.
* Add tests for dict/list support in python_scripts
* Lint
* Initial support for Google Wifi/OnHub
* Moved state logic to update function of API class
- Throttle added to update
- State logic implementation is cleaner
- Modified tests to work with the new throttle on update
Prometheus (https://prometheus.io/) is an open source metric and alerting
system. This adds support for exporting some metrics to Prometheus, using
its Python client library.
* New service `send_magic_packet` in new component `wake_on_lan`
* fix
* Unit tests for new component wake_on_lan
* Add wakeonlan to tests requirements
* remove wakeonlan from tests requirements and remake the component tests
* remove wakeonlan from tests requirements
* link domain and service names to component
* fix mocking in test_setup_component
* send_magic_packet as coroutine, better use of mock_calls in tests
* fix imports
* review changes
* better async calls
* Update test_wake_on_lan.py
This commit adds support for the set_operation_mode system call to the
generic thermostat component. This enables users to set whether the
thermostat is enabled or not by either setting it to auto or off.
* Remove the need to login on the UPC Connect component
* Remove unnecessary imports
* Update the unit tests for the UPC Connect component
* Fix the "302" error with the UPC Connect component
* Fix a flake8 error
* Update the unit tests for the UPC Connect component
* Add tube_state
Add tube_state sensor
* Final cleanup
* Make corrections
Correct PLATFORM_SCHEMA
* Fix space
* Make test pass
* Correct format of test
Test still failing, don’t understand why
* correct description
* Make test pass
Preferred method below returns None
state = self.hass.states.get('sensor.london_overground')
* Format for hound
* indent
* Make requested changes to test, not working
Test fails with:
AssertionError: assert 0 > 0
where 0 = len([])
Surely I need tube_state.setup_platform ?
* Fixed test
Config was wrong
* Change component name to london_tube
* Update name to london_underground
Make consistent
* cleanup
* Adding done_message to alert
Adding an optional entry to the config that will send a notification when an
alarm goes from on to off.
* Update test_alert.py
* Update test_alert.py
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Added camera service calls to arm/disarm the cameras. Entity id is optional so that with a single call we can arm all the cameras or specify a particular entity id to arm if applicable and possible in that camera type.
* Fixed the spaces and indentation related issues that houndci found
* Fixed the spaces and indentation related issues that houndci found
* Missed the const file which has the macros defined.
* Fixed the CI build error
* Fixed the CI build error because of unused variable in exception case
* Updating the arlo code based on comment from @balloob. Changed the arm and disarm to enable_motion_detection and disable_motion_detection respectively. Similarly fixed the AttributeError handling. Added dummy code to the demo camera also. Moved out the definitions in const.py into the camera __init__ file
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by houndci-bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot
* Fixed the comments posted by travis-ci integration bot for demo.py: expected 2 lines, found 1
* Updated code in camera __init__.py to use the get function instead of directly calling the member in the structure.
* Updated code in camera __init__.py
* Posting the updated code for PR based on @balloob's suggestions/recommendations
* Removed the arlo reference from demo code. Copy-paste error
* Removed the unused import found by hound bot
* Expected 2 lines before function, but found only 1.
* Based on @balloob's comments, moved these constants to the camera/arlo.py
* Added test_demo.py to test the motion enabled and motion disabled in camera component
* Fixing issues found by houndci-bot
* Fixing issues found by houndci-bot
* Fixing the code as per @balloob's suggestions
* Fixing the code as per @balloob's suggestions
* Fixing the test_demo failure. Tried to rewrite a base function to enable the motion in __init__.py and missed to add it to as a job.
* Fixing the hound bot comment
* Update arlo.py
* Update arlo.py
* Implement templates for covers
* Fix a few remaining pylint warnings
* Fix hound line-length warnings
* Fix one more hound line-length warning
* Fix quadruple-quotes an line length code-quality issues
* Irrelevant change to retrigger travis due to timeout
* Use volutuous Exclusive to check for mutex condition
* Fix incorrect state check
* Fixed mqtt subscription filter on sys $ topics
* fixed linting issue
* added unit tests for $ topics and changed fix to use re.escape
* merge upstream/dev mqtt unit tests
* Update test_init.py
* Open Hardware Monitor sensor
Platform which is able to connect to the JSON API of Open Hardware Monitor and adds sensors for the devices.
* Remove copyright in header, not needed.
* - Removed old code
- Fixed typo’s in comments
- Removed log spamming
- Removed code that was unnecessary
- Use requests instead of urllib
- Moved sensor update functionality to data handler, to remove unwanted constructor parameters
* Fixed typo in comment
Added tests
* Added default fixture, to stabilize tests
* - Fix for values deeper than 4 levels, no longer relies on fixed level
- Fixed tests
* Removed timer in preference of helper methods
* Moved update functionality back to Entity….
Updated SCAN INTERVAL
* Added timeout to request
Removed retry when Open Hardware Monitor API is not reachable
Fixed naming of sensors
Flow optimalisations
Fixed tests to use states
* Remove unused import
* Update InfluxDB to handle datetime objects
Updates the InfluxDB regex to ignore datetime objects being coverted
into float values.
Adds tests to the component to ensure datetime objects are corectly
handled.
* Fix Hound errors
Fixes errors from Hound bot
* Update InfluxDB to handle multiple decimal points
Changes the way InfluxDB handles values such as 1.2.3.4 to be 1.234 so
it stores in InfluxDB as a valid float value
* Fix lint issues
Reduce the size of a line for the linter
* Update InfluxDB to pass on unknown variable
If we get an error trying to convert a variable to a float, let's ignore
it completely
* Make InfluxDB Regex constants
Makes the Regex's used by InfluxDB constants so they don't need to be
compiled each time
* cleanup
* fix lint
* Update regex
* fix tests
* Fix JSON body missing new line character
* fix exceptions
* Use standard entity_ids for zwave entities
* Include temporary opt-in for new entity ids
* Update link to blog post
* Update tests
* Add old entity_id as state attribute
* Expose ZWave value details
* Update tests
* Also show new_entity_id
* Just can't win with this one
* Setup to send component data is option is enabled
* testcases, as well as moved to a single boolean, passed to the function
* fixed pep8 failures
* Clarify config option.
* Allow device tracker platforms to specify picture
* Allow device tracker to specify icon during discovery
* Clean up and add tests
* Fix lint
* Fix test
* Make percentage string values as floats in InfluxDB
Currently Z-wave and other compontents report an attributes battery
level as an integer, for example
```yaml
{
"is_awake": false,
"battery_level": 61,
}
```
However, some other components like Vera add the battery level as a
string
```yaml
{
"Vera Device Id": 25,
"device_armed": "False",
"battery_level": "63%",
"device_tripped": "False",
}
```
By removing any % signs in the field, this will send the value to
InfluxDB as an int, which can then be used to plot the data in graphs
correctly, like other percentage fields.
* Add tests and remove all trailing non digits
Adds tests and now removes all trailing non-numeric characters for
better use
* Update variable name for InfluxDB digit checks
Updates the variable used for the regex to remove trailing non digits
* Fix linting errors for InfluxDB component
Fixes a small linting error on the InfluxDB component
* dismiss service for persistent notifications
Unnecessary notifications can now be removed automatically. Added a
dismiss service to remove persistent notifications via script and/or
automation.
* removed unnecessary loop
loop removed
* Add initial version
* Fix requirements
* Prefer logging over printing
* Set executor thread name on >Py36 only
* Add tests
* Lint
* Add restrictedpython to test dependencies
* Create python_script.py
From doc:
```
However, an empty dict ({}) is treated as is. If you want to specify a list that can contain anything, specify it as dict:
>>> schema = Schema({}, extra=ALLOW_EXTRA) # don't do this
>>> try:
... schema({'extra': 1})
... raise AssertionError('MultipleInvalid not raised')
... except MultipleInvalid as e:
... exc = e
>>> str(exc) == "not a valid value"
True
>>> schema({})
{}
>>> schema = Schema(dict) # do this instead
>>> schema({})
{}
>>> schema({'extra': 1})
{'extra': 1}
```
* Add support for Vanderbilt SPC alarm panels.
* Arm/disarm + read state
* Autodiscover and add motion sensors
* Fix code formatting.
* Use asyncio.async for Python < 3.4.4.
* Fix for moved aiohttp exceptions.
* Add docstrings.
* Fix tests and add docstrings.
* Fix#7758 subscription expiration/removal
Removes a subscription after receiving an HTTP 410 response when trying to send a new message.
* Fix tests failing due to additional call
* Fix code style
* Lint
* Remove setting up an hbmqtt broker
* Don't pass loop to web.Application in tests
* Use .query instead of deprecated .GET for aiohttp requests
* Fix closing file resource
* Do not use asyncio mark
* Notify.html5 - PyJWT: Use options to disable verify
* Yamaha: Test was still using deprecated ip
* Remove pytest-asyncio
* starting light template component
* linting/flaking
* starting unit tests from copypasta
* working on unit testing
* forgot to commit the test
* wrapped up unit testing
* adding remote back
* updates post running tox
* Revert "adding remote back"
This reverts commit 852c87ff96.
* adding submodule back from origin
* updating submodule
* removing a line to commit
* re-adding line
* trying to update line endings
* trying to fix line endings
* trying a different approach
* making requested changes, need to fix tests
* flaking
* union rather than intersect; makes a big difference
* more tests passing, not sure why this one's failing
* got it working
* most of the requested changes
* hopefully done now
* sets; the more you know
* Added new commands and functionality to the harmony remote component.
-This includes the ability to optionally specify a number of times to repeat a specific command, such as pressing the volume button multiple times.
-Also added a new command that allows you to send multiple commands to the harmony at once, such as sending a set of channel numbers.
-Updated the unit tests for these changes.
* Fix flake8 coding violations
* Remove send_commands command and make send_command handle a single or list of commands
* Remove send_commands tests
* Update itach and kira remotes for new send_command structure. Fix pyharmony version in requirements_all.txt
* Fix incorrect variable name
* Fix a couple minor issues with remote tests
* Make ssh and telnet connections continuous in asuswrt
* Refactored SSH and Telnet connections into respective classes.
* Fixed several copy-paste typos and errors.
* More typos fixed.
* Small changes to arguments, to pass automated tests.
* Removed unsupported named arguments.
* Fixed a couple of mistakes in Telnet, and other lint errors.
* Added Telnet tests, and added lint exceptions.
* Removed comments from tests, as they irritated the hound.
* Ignore attribute changes in automation trigger from/to
* Quote names in deprecation warnings
This makes it somewhat easier to read if the suggestion happens to be
named "to".
* Add test with same state, new attribute value
* Remove global hass
* Http.auth test no longer spin up server
* Remove server usage from http.ban test
* Remove setupModule from test device_sun_light_trigger
* Update common.py
* # This is a combination of 3 commits.
# The first commit's message is:
Add seperate zwave panel
# The 2nd commit message will be skipped:
# unused import
# The 3rd commit message will be skipped:
# Use get for config
* Add seperate zwave panel
* Modify set_config_parameter to accept setting string values
* descriptions
* Tweaks
* Tweaks
* Tweaks
* Tweaks
* lint
* Fallback if no config parameteres are available
* Update services.yaml
* review changes
* Refactor color profiles to a class
* Refactor into preprocess_turn_on_alternatives
* LIFX: use light.preprocess_turn_on_alternatives
This avoids the color_name duplication and gains support for profile.
* Add kelvin parameter to light.turn_on
* Add brightness_pct parameter to light.turn_on
* LIFX: accept brightness_pct in effects
* Add test of kelvin/brightness_pct conversions
* Add sonos alarm clock update service
* Add tests and break lines
* Fix style errors
* Make test work with python<3.6
* Fix last two pylint errors
* fix new line to long errors
* SMTP notify enhancements: HTML emails and customization options
- Send full HTML emails, with or without inline attached images.
- Custom `timeout`.
- Custom `product_name` identifier for the `FROM` and `X-MAILER` email headers.
- New HTML email test
* `sender_name` instead of product_name
- Change `sender_name` instead of `product_name`.
- No changes in `X-Mailer` header.
- `From` header as always unless you define the new `sender_name` parameter.
* No longer require pyunify during tests
* No longer require cast during tests
* No longer required dependency for tests
* No longer require pymochad for tests
* Astral is a core dependency
* Avoid having to install datadog dependency during tests
* CMUS test doesn't test anything
* Frontier Silicon doesn't test anything
* No longer require mutagen
* Update requirements_test_all.txt
* Remove stale comment
* Support adding different server locations
* Rename variables and move CONF_ const into component as requested in review
* Fix unittests
* Forgot to add tests for microsoft_face_identify
* Generate a new updateDate with every call
This should fix#7459
Tests need to be updated in another commit.
* Replace STATIC_TIME with datetime object check
Removing the "DATE" argument from the Alexa component's configuration (because it is now dynamically generated) requires this commit's changes to the test cases to check that the updateDate data is a datetime type rather than a specific hardcoded value ('2016-10-10T19:51:42.0Z').
* Fix brackets
* # This is a combination of 3 commits.
# The first commit's message is:
Add seperate zwave panel
# The 2nd commit message will be skipped:
# unused import
# The 3rd commit message will be skipped:
# Use get for config
* Add seperate zwave panel
* more info
* Add usercodeview
* Improve api
* Improve api
* Separate api into own file.
* disable missing import
* review changes
* Tests 1
* Verify that we fetch data from groups
* Tests groups
* config 1
* usercode 1
* Api mods
* Tweak API
* docstrings
* 100% api testing
* Refactor sun component for correctness
* Convert datetimes to dates for astral
* Fix tests for updated code
* Fix times now that calcs are fixed
* Move sun functions to helpers
* Fix flake on new file
* Additional tweaks from review
* Update requirements
* Convert automatic device tracker to push updates
* Update test
* Add to coveragerc
* Fire hass events when automatic update received
* Change brace indentation
* correct MQTT subscription filter
* wildcard handling (#) fixed
* wildcard handling (#) fixed
* added tests for topic subscription like +/something/#
* function names changed (line too long)
* using raw strings for regular expression
import order changed
* add support for shuffle toggling on Spotify component.
this also required adding support for shuffle on the
media_player component.
* lint
* Use ATTR_MEDIA_SHUFFLING for service handler param
* Line too long fix
* fix tests
* add shuffle set to demo mediaplayer
* rename shuffle attribute
* new implementation without mqtt
* fixed lint findings
* fixed more lint findings
* fixed final flak8 error
* added unit tests for platform "plant"
* - changed status to "OK" / "problem"
- added attribute "problem" with details on the problems
- removed unused constant
- setting icon to "?" until we have meaningful data
* reformatted code to meet line length requirements
* binary_sensor.workday: fix handling of states vs provinces
* Add test cases for workday sensor with states
* remove redundant assignment
* Repair unit test to improve coverage
Patch from Wolf-Bastian Pöttner
* Fix handling of invalid states/provinces
* fix indentation to satisfy pylint
* Remove global limit on white light temperature
Here are the supported temperatures of some popular bulbs:
Philips Hue: 2000K-6500K (the current 500-154 mired range)
LIFX Color 1000: 2500K-9000K
IKEA TRÅDFRI: 2200K, 2700K, 4000K
Obviously, Home Assistant cannot enforce a global limit and work properly
with all of these bulbs. So just remove the limit and leave it up to each
platform to work it out.
This commit updates the existing users and adds a clamp to Hue (where the
limit appears to have originated). It does not attempt to update other
platforms that might need extra handling of the larger range that is now
possible.
* Add min_mireds/max_mireds state attributes to lights
* Support min_mireds/max_mireds with LIFX lights
Steve Rhoades
Lukas Barth
Fabian Affolter
Dan Sarginson
Martin Hjelmare
emlt
Paulus Schoutsen
Kevin Fronczak
Adam Mills
Chris
Pascal Vizeli
Richard Cox
Abílio Costa
Robin
Colin O'Dell
Sean Dague
Anders Melchiorsen
Andrey
Dougal Matthews
Russell Cloran
Eugenio Panadero
Matthew Treinish
Charles Blonde
PhracturedBlue
Johan Bloemberg
Flavien Charlon
Adrien Ball
Michael Fester
Josh
viswa-swami
natemason
Wim Haanstra
Alex Mekkering
Phil Hawthorne
Caleb
pezinek
Alex Harvey
boojew
Thiago Oliveira
Marco Sirabella
tedstriker
Jacob Minnis
Martin Berg
Trevor
cribbstechnologies
Per Osbäck
Boris K
Anton Sarukhanov
amigian74
everix1992
Stu Gott
nordeep
Lev Aronsky
John Arild Berentsen
Marc Egli
Tsvi Mostovicz
jumpkick
Nuno Sousa
Marc Egli
Robbie Trencheny
ChristianKuehnel
Dan Ports
Brian Cribbs