* zone trigger supports entity id pattern
* fixed lint error
* fixed test code
* initial version of new geo_location trigger
* revert to original
* simplified code and added tests
* refactored geo_location trigger to be based on a source defined by the entity
* amended test cases
* small refactorings
* Add ws get, set card
* lint+fix test
* Add test for set
* Added more tests, catch unsupported yaml constructors
Like !include will now give an error in the frontend.
* lint
* New rtorrent sensor
* Fix lint issue
* Fix another lint issue
* Fix pylint issue
* how many python linters do you guys use
* Cleanup code
* python linting
* newline
* Added support for dyson hot+cool fan as climate device
* Removed decimal place in kelvin units conversion
Minor edits to be consistent with Dyson's internal conversion of temperature from kelvin to celsius. It does not include decimal place to convert between kelvin and celsius.
* made changes according to comments
* Refactored target temp logics, fixed enum issues
* changed name of component to entity
* removed temperature conversion for min/max property
* changed back to 644 permission
* added extra tests for almost-all coverage
* changed assert method to avoid lack of certain method in py35
* added test_setup_component
* shorten line length
* fixed mock spec and added checking of message listener is called
* added doc string and debug msg
* shorten line length
* removed pending target temp
* Enable brightness slider for RGB
If we are using RGB with no brightness topic, the brighness slider
should still be visible, as we can scale the RGB amount to give us the
brightness.
* Output RGB scaled by brightness
If we are outputting to an RGB device, but do not have a dedicated
brightness topic set, when the brightness slider is changed, we should
output the current colour's HS, with the V coming from the brightness
slider.
* Brightness from RGB when we're not using a brightness topic
When we aren't using a brightness topic, set the brightness slider based
on the received value from an RGB -> HSV conversion.
* Test for new brightness state scaled by RGB
This adds a test to make sure the brightness stored in the state is
being computed correctly from the RGB value when a dedicated brightness
topic is not set.
* Changes from review
Fixes formatting of supported features flags, and checks HS colour
hasn't been set when operating in RGB-only mode
* Set optimistic brightness correctly in rgb mode
When we're using rgb mode to set the brightness, we want to set
optimistic brightness if:
we are running in optimistic mode
OR
the brightness state topic isn't set and we have a brightness command topic
OR
the rgb state topic isn't set and we don't have a brightness command topic
* Add test for turn_on in RGB brightness mode
* Fix linky sensor login error
* Make platform fail-safe
Adding following enhancements:
* Make sure the platform loads correctly by making the first API request in setup_platform.
* Close the session after each API call.
* Use timeout parameter everywhere.
* Fix Hound CI error: line too long.
* Update pylinky library
* Remove LinkyClient from update()
* hass.async_add_executor_job
* Fix accessories.run -> async_track_state_change
* Fixed media_player test
* Flags are now local vars
* consistent use of " and '
* Add doorsense sensor for August 3rd Gen Smart Lock Pro
Add a binary sensor to August for the August 3rd Gen Smart Lock Pro doorsense sensor.
This is a re-do from PR 17116 https://github.com/home-assistant/home-assistant/pull/17116 that I closed due to rebase issue on my end.
* Changed to use snjoetw provided code
Going through the py-august I found that snjoetw had provided updated versions for the august component (august.py and binary_sensor/august.py) to include DoorSense sensor.
Changed what I did to to what snjoetw provided instead as he split it into 2 classes; much cleaner I think.
I modified his coding with:
Fixes that were done to the August component and not part of the coding snjoetw provided.
Added the debug logging improvement I had done in the code.
Note, fix I committed earlier for lock atribute (lock/august.py) is thus still the same.
* Reverted change from add_device to add_entities
Missed an item when merging snjoetw's code with current. Fixed.
* Updated call from add_devices to add_entities as well
Updated the call from add_devices to add_entities.
* Fixed permissions on files
Fixed permissions on components/august.py and binary_snesor/august.py
* Changed if/else to if/continue
Changed logic so that if the door sensor state is unknown during initalization the debug log is written and then continue the loop instead of using if/else logic.
* Added available property for Door Sensor
Added the available property for the Door Sensor and setting it to False if a status unknown is received.
* Updated setting self._available
Changed line for setting self._available to what Martin provided. Much more efficient to read. :-)
* Add OpenTherm Gateway sensor platform.
* Add OTGW_ variables to list of supported sensors.
* Order imports.
* Add OpenTherm Gateway binary sensor support.
* Revert "Add OpenTherm Gateway binary sensor support."
This reverts commit 115acaa912.
* Import COMP_SENSOR from sensor component rather than defining it.
* Update opentherm_gw sensor platform docs url.
* Update dependency to v0.2b1
Old version had incorrect variable names for some of the sensors
* Update requirements_all.txt
* Address review findings.
* Update .coveragerc
* Add LG soundbar support
We can autodiscover these, so for now let's skip any local configuration.
Currently we expose volume, source and equaliser preset - we can expose the
other volume controls and options as well if necessary, but I don't know
whether it's worth it.
* Add discovery of LG devices
This is a generic discovery type that doesn't obviously contain enough
information to identify whether we're talking to a speaker system or any
other kind of device - on the other hand I haven't been able to find any
other LG devices that respond like this, so we can cross that bridge when
we get to it.
* Lint
- Bump twilio requirement to latest 6.19.1 version
- The generic response type is gone in the latest
versions of the twilio package. It appears we were
generating an empty response just to get the empty
xml body. TwilML is the new base class all responses
inherit from. So I've switched the code over to using
and empty TwilML object instead.
- The exception type was moved to a different location.
* Validate ports as port
Better than just a positive integer since it limits the range from 1 to 65535.
* Validate port for Axis
* Validate port for Xiaomi Home Camera
* Validate port for Modbus
* Validate port for Yamaha MusicCast Receivers
* Update zhong_hong.py
Validate port as a port, the gateway address as positive_int
Also moved the default values to their variable
* Validate port for the Asterisk Voicemail interface
* Fix lint
* Validate port for Xiaomi Cameras
* Initial changes to resolve issue 16733
Added logic to ensure that if the state is unknown during startup that the error about being unable to parse the value is not logged.
Further, also ensured that if an attribute is set to None it does not try to convert the None value to Fahrenheit as that will cause an error.
* Cleaned up and added few comments
Cleaned up some lines based on flake8 and pylint.
Added some comment lines on the items added.
* Changed to async and using async_added_to_hass
Changed sensor to use async.
Registering state tracking for sensors and initial setup is now done upon the home assistant start event.
* Updated test and small fix
Updated test to handle unavailable state of sensor and return of None for attributes when data is unavailable.
Ensured that atributes are set to None when state is unavailable due to incorrect data.
* Fixed some flake8 issues in test
Fixed some flake8 issues in test_moldindicator.py.
* Updates based on review
Updates based on review from MartinHjelmare
* Added sensor entity_id to logger errors
Added sensor entity_id to logger error messages
Update test to use constant STATE_UNKNOWN instead of fixed string.
* ID is added to cards without ID in ui-lovelace.yaml when loaded
* Hound
* Remove ui-lovelace.yaml
* Nicer get
* Update tests
* If YAML dump fails, config not gone
* Add tests
* Woof!
* Remove nosetests
* Address comments
* Woof...
* Delete test.yaml
* update rights to saved file
* fix
* line break
* Updgrae blinkpy to 0.10.0
- Remove status sensor (API endpoint unreliable for this)
- Wifi strength reports in wifi bars rather than dBm (result of new API
endpoint)
- Added unique ids based on serial number
* Update requirements
* add capability for manually specifying IP and port of Konnected device(s)
* add config options for blink and discovery settings
* import konnected only in functions where needed
* updates from code review feedback
* convert manual_discovery to async
* code review updates; use correct sync vs async
I believe this adds registry support. The UI allows me to change
the entity ID now.
For example, a light bulb called "BasementHallLight" in the Vera
has an initial Entity ID like light.basementhalllight_108, where
108 is the unique ID that the Vera assigned the device when I
added it to the z-wave network.
Now I can use the UI to change the Entity ID to
light.basementhalllight and I can still turn it on and off.
* Add device_registry support for sensor and switch domains
* Add device_registry support for light
* Add device registry to binary_sensor, climate, cover
* Add device registry to zwave fan
* Fix test for config entry loading
* lint
* revert erroneous modification
* Revert device_registry.py change
* First commit
* Feature complete?
* Add dependency
* Move setting poe mode logic to library
* Use guard clauses
* Bump requirement to 2
* Simplify saving switches with poe off
* Store and use poe mode
* Fix indentation
* Fix flake8
* Configuration future proofing
* Bump dependency to v3
* Add first test
* Proper use of defaults with config flow (thanks helto)
* Appease hound
* Make sure there can't be duplicate entries of combination host+site
* More tests
* More tests
* 98% coverage of controller
* Fix hound comments
* Config flow step init not necessary
* Use async_current_entries to check if host and site for controller is used
* Remove storing/restoring poe off devices to slim PR
* First batch of switch tests
* More switch tests.
* Small improvements and clean up
* Make tests pass
Don't name device in device registry
* Dont process clients that belong to non-UniFi POE switches
* Allow selection of site from a list in config flow
* Fix double blank lines in method
* Update codeowners
* Fix rangefilter
RangeFilter would break for lower or upper bounds of 0, evaluating to False and thus not being handled correctly as bounds
* Add test for zero bounds
* Migrate CONF_WEBHOOK_ID to homeassistant.const
* Switch over all instances of webhook_id to the const
* Switch last instance of webhook_id to the const
* automation: conf constants for conf
* webhook: conf constants for conf
* new lib dependencies, working old xmpp
* non working aioxmpp
* reverting to sync xmpp
will try slixmpp instead of aioxmpp
reasons:
echo bot example of aioxmpp had blocking behavior (slixmpp echo bot works fine)
closer API to sleekxmpp
less dependencies than aioxmpp
* first working slixmpp version
* DEBUG messages, changed MUC call
the joinMUC method changed from sleekxmpp to slixmpp
added debug messages
better name for cleanup callback
* flake8
* little cleanup, tested MUC
* requirements_all
* dependencies managed by slixmpp, removed debug messages
* resource configurable by user, requirements updated
* changed __init__ parameter code format
* removed trailing dots from LOG messages
* changed super call to python3 format
* Provide an individual color temperature range per Yeelight model
* Fix lint
* Bump yeelight version
* Remove unused const
* Enable SUPPORT_COLOR_TEMP for BulbType.WhiteTemp
* Add notify.homematic_signalgen
* Update homematic_signalgen.py, test_homematic_signalgen.py
* Added new files to .coveragerc
* Fixed review comments from houndci-bot
* Fixed pylint errors
* Regenerate requirements_test_all.txt by script/gen_requirements_all.py
* Fix flake8 warnings
* Renamed notify.homematic_signalgen to notify.homematic and made it generic
* Update .coveragerc and requirements_test_all.txt
* Removed the terms signal generator from the sources.
* Support abbreviations in discovery topic
* Add abbreviations for all words. Add testcase.
Add missing docstring.
* Add missing abbreviations
* Support topic prefix
* Update test case
* Restrict topic prefix
* Fix merge
* Simplify abbreviations expanding, assume TOPIC_PREFIX is one character long
* Support abbreviated keys instead of words
* Remove redundant abbreviations
* Remove extra spaces in abbreviation list
* Make topic prefix less restrictive
* Make topix prefix a bit more restrictive again
* Add support for off_delay to MQTT binary_sensor
* Fix debounce, add testcase
* Make off_delay number of seconds instead of timedelta
* Update mqtt.py
* Fix testcase, remove CONF_OFF_DELAY from const.py
* Implement turn_off and turn_on actions for eq3btsmart
This commit implements the turn_off and turn_on methods for eq3btsmart. Turning the device off will set the thermostat to "OFF". Turning it on will set it to "AUTO".
* Add missing support flags for on/off feature
* Fix line length
* Enable BMW component to be unit system aware
* lint fixes
* use constants for config entries
* remove configuration from component and rely only on HA config of unit_system
* remove unused import
* update code to reflect feedback
* lint fixes
* remove unnecessary comments
* rework return statement to satisfy pylint
* more lint fixes
* add tests for volume utils
* lint fixes
* more lint fixes
* remove unnecessary comments
* Clean up leftover config schema option
* Allow import groups via new config yaml setup
* Fix and add test
* Add a test without groups for legacy import
* Change default import groups to False
* Fix I/O in test
* Made it possible to define multiple octoprint printers
* style fix
* Added configuration option for octoprint port
* SSL support in octoprint platform configuration
* Octoprint component now auto loads sensor and binary_sensor platforms
* preliminary support for auto discovery of octoprint servers
* Moved sensors and binary sensors configuration into main octoprint configuration
* Using base_url as the key for storing api in the octoprint component
* made sure to not supersede the platforms' domains
* bugfix: continue setting up other printers if one fails
* flake8 style correction
* Added icons to sensors
* Fail platform setup if no printers were successfully added
* Simplified custom validator
Aaron Bach
Sébastien RAMAGE
Manuel de la Rosa
Malte Franken
Tommy Jonsson
Daniel Høyer Iversen
Bram Kragten
Matt Snyder
Paulus Schoutsen
Richard Patel
Luke Fritz
Mathieu Velten
Oscar Tin Lai
Fabian Affolter
emontnemery
Paulus Schoutsen
guillaume1410
Raymon de Looff
mvn23
Bob Clough
Julien Debaru
Robert Svensson
Daniel Shokouhi
cdce8p
Glenn Waters
Nick Touran
Steven Looman
Nick Horvath
ehendrix23
Thomas Lovén
jjlawren
Anders Melchiorsen
Kevin Fronczak
Nikolay Vasilchuk
Matthew Garrett
Brian Gianforcaro
Jorim Tielemans
Eduard van Valkenburg
cgtobi
Ville Skyttä
Nate Clark
Brant Knudson
Marcel Hoppe
Ben Lebherz
Charles Garwood
Tsvi Mostovicz
William Scanlon
Alexander Lyon
Daniel Perna
Dougal Matthews
Pascal Vizeli
Niels Mündler
Julius Mittenzwei
Adam
kennedyshead
Rohan Kapoor
Craig J. Midwinter
333ryan18
noxhirsch
J4nsen
Dan Klaffenbach
Miloš Bunčić
Keiran S
Florian Klien
Tom Harris
Martin Berg
Tom French
Jedmeng
Sebastian Muszynski
Martin Mois
shred86
Zhong Jianxin
Mister Wil
Karim Geiger
uchagani
Martin Hjelmare
George Marshall
Fabien Piuzzi
Dav0815