3f3f77c6e6
Reduce config entry setup/unload boilerplate N-P ( #49777 )
2021-04-27 20:42:21 +02:00
4cd7f9bd8b
Raise ConfigEntryAuthFailed during setup or coordinator update to start reauth ( #48962 )
2021-04-09 19:41:29 -10:00
198ecb0945
Uniformize platform setup ( #47101 )
...
* A platform is not a component
* Fix dynalite
* SUPPORTED_PLATFORMS --> PLATFORMS
* In tests
* In tests 2
* Fix SmartThings
* Fix ZHA test
* Fix Z-Wave
* Revert Z-Wave
* Use PLATFORMS const in ambient_station
* Fix ihc comment
2021-03-02 21:43:59 +01:00
10e88cd23d
Improve nest defense against broken event loop on shutdown ( #46494 )
2021-02-14 13:36:05 +01:00
2fb3be50ab
Make DeviceRegistry.async_get_device connections arg optional ( #44897 )
...
* Make async_get_device connections Optional, default None
* Remove unnecessary async_get_device connections arg usages
Some of these were using an incorrect collection type, which didn't
cause issues mostly just due to luck.
2021-01-07 13:49:45 +01:00
321c0a87ae
Resolve nest pub/sub subscriber token refresh issues ( #44686 )
2021-01-02 01:51:01 +01:00
baacf2cd7d
Publish timestamps in nest events ( #44641 )
2020-12-30 10:23:48 +01:00
71af0fac16
Improve nest setup error handling ( #44385 )
...
* Improve error handling user experience
This is meant to make the nest integration quieter. Exceptions are handled with a single log error message.
Co-authored-by: j-stienstra <65826735+j-stienstra@users.noreply.github.com>
2020-12-27 20:30:51 -08:00
51b88337ca
Simplify nest event handling ( #44367 )
...
* Simplify nest event handling
Use device specific update callbacks rather than a global callback.
The motivation is to prepare for a follow up change that will store
camera specific event tokens on the camera itself, so that a service
can later fetch event specific image snapshots, which would be difficult
to send across the event bus.
* Increase nest camera test coverage
* Remove unnecessary device updates for nest cameras
* Remove unused imports
* Fix device id check to look at returned entry
* Remove unused imports after rebase
* Partial revert of nest event simplification
* Push more update logic into the nest library
* Revert nest device_info changes
* Revert test changes to restore global update behavior
* Bump nest library version to support new callback interfaces
2020-12-27 09:49:22 +01:00
24ccdb55bb
Move Legacy Works With Nest integration to subdirectory ( #44368 )
...
* Move Legacy Works With Nest integration to subdirectory
Motivation is to streamline the actively developed integration e.g. make code coverage easier to reason about and simplify __init__.py
2020-12-22 12:42:37 -08:00
81341bbf91
Handle expiration of nest auth credentials ( #44202 )
...
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
2020-12-20 01:41:29 +01:00
945a0a9f7e
Add nest device triggers for camera and doorbell events ( #43548 )
2020-11-30 09:19:42 +01:00
745823dd55
Add nest SDM API camera/doorbell events ( #42700 )
...
* Add nest SDM API camera/doorbell events
Events are fired when pubsub messages are received. When messages
are received lookup a home assistant device id from the nest
device id, so that the home assistant device id can be included
in the event payload.
* Update homeassistant/components/nest/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update nest code style based on PR feedback
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2020-11-24 14:34:43 -08:00
3dd14e05e3
Update nest library and switch events to async ( #43583 )
2020-11-24 08:53:50 -07:00
2d14f07396
Improve nest SDM integration error handling ( #43271 )
2020-11-19 12:26:49 +01:00
a5da98680a
Add nest climate support for SDM API ( #42702 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2020-11-06 09:57:02 +01:00
8caa177ba1
Add Nest cam support for the SDM API ( #42325 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2020-10-27 15:20:01 +01:00
0c852b5f81
Update nest integration with fixes from initial PR ( #42250 )
2020-10-24 20:48:28 +02:00
52b66e88c7
Update Nest integration to support Google Nest Device Access (new API) ( #41689 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2020-10-21 10:17:49 +02:00
965bb2c8df
Update nest to use async_add_executor_job ( #41926 )
2020-10-16 13:31:16 +02:00
53545c984b
Log lines do not end with a full stop ( #37527 )
2020-07-05 23:04:19 +02:00
1855c91988
Use CONF_CLIENT_ID & CONF_CLIENT_SECRET from homeassistant.const ( #36233 )
...
* Use CONF_CLIENT_ID & CONF_CLIENT_SECRET from homeassistant.const
* Fix pylint
* Use in tests
* Search for "client_id"
* Fix tests
* Fix test
* Fix test
2020-05-30 17:27:20 +02:00
fca90a8ddc
Improve string formatting v5 ( #33697 )
...
* Improve string formatting v5
* Address review comments
2020-04-05 17:48:55 +02:00
6f1900c6f4
Replace OSError aliases with OSError ( #33655 )
2020-04-04 22:09:11 +02:00
4ebbabcdd1
Unsub dispatcher when removing entity from hass ( #33510 )
...
* Unsub dispatcher when removing entity from hass
* Update homeassistant/components/plaato/sensor.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/volvooncall/__init__.py
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
2020-04-02 09:25:33 -07:00
e6388e186c
Remove unnecessary string literal concatenations ( #30360 )
2020-01-02 21:17:10 +02:00
186799794d
Sort imports according to PEP8 for nest ( #29670 )
2019-12-09 12:08:51 +01:00
ab598da4ba
Move imports in nest component ( #27778 )
2019-10-17 15:03:50 +02:00
1c5e0123c9
Use literal string interpolation in integrations N-Q (f-strings) ( #26391 )
2019-09-03 11:35:00 -07:00
4de97abc3a
Black
2019-07-31 12:25:30 -07:00
84cf76ba36
Climate 1.0 ( #23899 )
...
* Climate 1.0 / part 1/2/3
* fix flake
* Lint
* Update Google Assistant
* ambiclimate to climate 1.0 (#24911 )
* Fix Alexa
* Lint
* Migrate zhong_hong
* Migrate tuya
* Migrate honeywell to new climate schema (#24257 )
* Update one
* Fix model climate v2
* Cleanup p4
* Add comfort hold mode
* Fix old code
* Update homeassistant/components/climate/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/climate/const.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* First renaming
* Rename operation to hvac for paulus
* Rename hold mode to preset mode
* Cleanup & update comments
* Remove on/off
* Fix supported feature count
* Update services
* Update demo
* Fix tests & use current_hvac
* Update comment
* Fix tests & add typing
* Add more typing
* Update modes
* Fix tests
* Cleanup low/high with range
* Update homematic part 1
* Finish homematic
* Fix lint
* fix hm mapping
* Support simple devices
* convert lcn
* migrate oem
* Fix xs1
* update hive
* update mil
* Update toon
* migrate deconz
* cleanup
* update tesla
* Fix lint
* Fix vera
* Migrate zwave
* Migrate velbus
* Cleanup humity feature
* Cleanup
* Migrate wink
* migrate dyson
* Fix current hvac
* Renaming
* Fix lint
* Migrate tfiac
* migrate tado
* Fix PRESET can be None
* apply PR#23913 from dev
* remove EU component, etc.
* remove EU component, etc.
* ready to test now
* de-linted
* some tweaks
* de-lint
* better handling of edge cases
* delint
* fix set_mode typos
* apply PR#23913 from dev
* remove EU component, etc.
* ready to test now
* de-linted
* some tweaks
* de-lint
* better handling of edge cases
* delint
* fix set_mode typos
* delint, move debug code
* away preset now working
* code tidy-up
* code tidy-up 2
* code tidy-up 3
* address issues #18932 , #15063
* address issues #18932 , #15063 - 2/2
* refactor MODE_AUTO to MODE_HEAT_COOL and use F not C
* add low/high to set_temp
* add low/high to set_temp 2
* add low/high to set_temp - delint
* run HA scripts
* port changes from PR #24402
* manual rebase
* manual rebase 2
* delint
* minor change
* remove SUPPORT_HVAC_ACTION
* Migrate radiotherm
* Convert touchline
* Migrate flexit
* Migrate nuheat
* Migrate maxcube
* Fix names maxcube const
* Migrate proliphix
* Migrate heatmiser
* Migrate fritzbox
* Migrate opentherm_gw
* Migrate venstar
* Migrate daikin
* Migrate modbus
* Fix elif
* Migrate Homematic IP Cloud to climate-1.0 (#24913 )
* hmip climate fix
* Update hvac_mode and preset_mode
* fix lint
* Fix lint
* Migrate generic_thermostat
* Migrate incomfort to new climate schema (#24915 )
* initial commit
* Update climate.py
* Migrate eq3btsmart
* Lint
* cleanup PRESET_MANUAL
* Migrate ecobee
* No conditional features
* KNX: Migrate climate component to new climate platform (#24931 )
* Migrate climate component
* Remove unused code
* Corrected line length
* Lint
* Lint
* fix tests
* Fix value
* Migrate geniushub to new climate schema (#24191 )
* Update one
* Fix model climate v2
* Cleanup p4
* Add comfort hold mode
* Fix old code
* Update homeassistant/components/climate/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/climate/const.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* First renaming
* Rename operation to hvac for paulus
* Rename hold mode to preset mode
* Cleanup & update comments
* Remove on/off
* Fix supported feature count
* Update services
* Update demo
* Fix tests & use current_hvac
* Update comment
* Fix tests & add typing
* Add more typing
* Update modes
* Fix tests
* Cleanup low/high with range
* Update homematic part 1
* Finish homematic
* Fix lint
* fix hm mapping
* Support simple devices
* convert lcn
* migrate oem
* Fix xs1
* update hive
* update mil
* Update toon
* migrate deconz
* cleanup
* update tesla
* Fix lint
* Fix vera
* Migrate zwave
* Migrate velbus
* Cleanup humity feature
* Cleanup
* Migrate wink
* migrate dyson
* Fix current hvac
* Renaming
* Fix lint
* Migrate tfiac
* migrate tado
* delinted
* delinted
* use latest client
* clean up mappings
* clean up mappings
* add duration to set_temperature
* add duration to set_temperature
* manual rebase
* tweak
* fix regression
* small fix
* fix rebase mixup
* address comments
* finish refactor
* fix regression
* tweak type hints
* delint
* manual rebase
* WIP: Fixes for honeywell migration to climate-1.0 (#24938 )
* add type hints
* code tidy-up
* Fixes for incomfort migration to climate-1.0 (#24936 )
* delint type hints
* no async unless await
* revert: no async unless await
* revert: no async unless await 2
* delint
* fix typo
* Fix homekit_controller on climate-1.0 (#24948 )
* Fix tests on climate-1.0 branch
* As part of climate-1.0, make state return the heating-cooling.current characteristic
* Fixes from review
* lint
* Fix imports
* Migrate stibel_eltron
* Fix lint
* Migrate coolmaster to climate 1.0 (#24967 )
* Migrate coolmaster to climate 1.0
* fix lint errors
* More lint fixes
* Fix demo to work with UI
* Migrate spider
* Demo update
* Updated frontend to 20190705.0
* Fix boost mode (#24980 )
* Prepare Netatmo for climate 1.0 (#24973 )
* Migration Netatmo
* Address comments
* Update climate.py
* Migrate ephember
* Migrate Sensibo
* Implemented review comments (#24942 )
* Migrate ESPHome
* Migrate MQTT
* Migrate Nest
* Migrate melissa
* Initial/partial migration of ST
* Migrate ST
* Remove Away mode (#24995 )
* Migrate evohome, cache access tokens (#24491 )
* add water_heater, add storage - initial commit
* add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
delint
* Add Broker, Water Heater & Refactor
add missing code
desiderata
* update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
* bugfix - loc_idx may not be 0
more refactor - ensure pure async
more refactoring
appears all r/o attributes are working
tweak precsion, DHW & delint
remove unused code
remove unused code 2
remove unused code, refactor _save_auth_tokens()
* support RoundThermostat
bugfix opmode, switch to util.dt, add until=1h
revert breaking change
* store at_expires as naive UTC
remove debug code
delint
tidy up exception handling
delint
add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
delint
bugfix - loc_idx may not be 0
more refactor - ensure pure async
more refactoring
appears all r/o attributes are working
tweak precsion, DHW & delint
remove unused code
remove unused code 2
remove unused code, refactor _save_auth_tokens()
support RoundThermostat
bugfix opmode, switch to util.dt, add until=1h
revert breaking change
store at_expires as naive UTC
remove debug code
delint
tidy up exception handling
delint
* update CODEOWNERS
* fix regression
* fix requirements
* migrate to climate-1.0
* tweaking
* de-lint
* TCS working? & delint
* tweaking
* TCS code finalised
* remove available() logic
* refactor _switchpoints()
* tidy up switchpoint code
* tweak
* teaking device_state_attributes
* some refactoring
* move PRESET_CUSTOM back to evohome
* move CONF_ACCESS_TOKEN_EXPIRES CONF_REFRESH_TOKEN back to evohome
* refactor SP code and dt conversion
* delinted
* delinted
* remove water_heater
* fix regression
* Migrate homekit
* Cleanup away mode
* Fix tests
* add helpers
* fix tests melissa
* Fix nehueat
* fix zwave
* add more tests
* fix deconz
* Fix climate test emulate_hue
* fix tests
* fix dyson tests
* fix demo with new layout
* fix honeywell
* Switch homekit_controller to use HVAC_MODE_HEAT_COOL instead of HVAC_MODE_AUTO (#25009 )
* Lint
* PyLint
* Pylint
* fix fritzbox tests
* Fix google
* Fix all tests
* Fix lint
* Fix auto for homekit like controler
* Fix lint
* fix lint
2019-07-08 14:00:24 +02:00
2c07bfb9e0
Remove dependencies and requirements ( #23024 )
...
* Remove dependencies and requirements
* Revert "Remove dependencies and requirements"
This reverts commit fe7171b4cd391355ee2c
2019-04-12 10:13:30 -07:00
c5de32e7b1
Climate const.py move ( #20945 )
...
* Move constants to const.py
* Import from const instead of climate
2019-02-14 20:34:43 +01:00
161c368c9d
Update file header ( #21054 )
...
* Update file header
* Update __init__.py
2019-02-13 20:35:12 -08:00
f84c0ee473
Upgrade python-nest to 4.1.0 ( #20313 )
2019-01-22 13:23:33 +01:00
9b53b7e9e4
Bump Python-Nest to 4.0.5 ( #18580 )
...
* Fix Nest eco
* Update Python-nest to 4.0.5
* Update requirements_all.txt
* Update requirements_test_all.txt
2018-11-20 12:18:46 +01:00
42fea4fb97
Add services to set/update and cancel Nest ETA ( #17836 )
...
* Add service to cancel ETA
* Update test requirements
* Change service name and update logging
* Reformat logging to verify structures
2018-11-06 16:11:10 +01:00
1578187376
Change cv.string to [cv.string] ( #18050 )
2018-10-31 12:52:21 +01:00
7f0a50ce31
async_create_task ( #17059 )
...
* async_create_task
* Update google.py
2018-10-02 11:03:09 +02:00
bab079f649
Add unique_id to Nest Sensors ( #16869 )
...
* Add unique_id
* Add device_info
* Fix typo
* Update __init__.py
2018-09-26 09:19:47 +02:00
5341785aae
Revert changes to platforms using self.device ( #16209 )
...
* Revert tank_utility
* Fix Soundtouch
* Fix Plex
* Fix Emby
* Fix Radiotherm
* Fix Juicenet
* Fix Qwikswitch
* Fix Xiaomi miio
* Fix Nest
* Fix Tellduslive
* Fix KNX
2018-08-26 21:25:39 +02:00
0009be595c
Device Registry ( #15980 )
...
* First draft
* Generate device id
* No obscure registry
* Dont store config_entry_id in device
* Storage
* Small mistake on rebase
* Do storage more like entity registry
* Improve device identification
* Add tests
* Remove deconz device support from PR
* Fix hound comments, voff!
* Fix comments and clean up
* Fix proper indentation
* Fix pydoc issues
* Fix mochad component to not use self.device
* Fix mochad light platform to not use self.device
* Fix TankUtilitySensor to not use self.device
* Fix Soundtouch to not use self.device
* Fix Plex to not use self.device
* Fix Emby to not use self.device
* Fix Heatmiser to not use self.device
* Fix Wemo lights to not use self.device
* Fix Lifx to not use self.device
* Fix Radiotherm to not use self.device
* Fix Juicenet to not use self.device
* Fix Qwikswitch to not use self.device
* Fix Xiaomi miio to not use self.device
* Fix Nest to not use self.device
* Fix Tellduslive to not use self.device
* Fix Knx to not use self.device
* Clean up a small mistake in soundtouch
* Fix comment from Ballob
* Fix bad indentation
* Fix indentatin
* Lint
* Remove unused variable
* Lint
2018-08-22 10:46:37 +02:00
dbd0763f83
Grammar and spelling fixes ( #16065 )
2018-08-19 22:29:08 +02:00
83b0ef4e26
Fix Nest async from sync ( #15997 )
2018-08-16 13:46:43 +02:00
f58425dd3c
Refactor data entry flow ( #15883 )
...
* Refactoring data_entry_flow and config_entry_flow
Move SOURCE_* to config_entries
Change data_entry_flow.FlowManager.async_init() source param default
to None
Change this first step_id as source or init if source is None
_BaseFlowManagerView pass in SOURCE_USER as default source
* First step of data entry flow decided by _async_create_flow() now
* Lint
* Change helpers.config_entry_flow.DiscoveryFlowHandler default step
* Change FlowManager.async_init source param to context dict param
2018-08-09 13:24:14 +02:00
59f8a73676
Return True from Nest setup ( #15797 )
2018-08-02 16:36:37 -06:00
ea2ff6aae3
Use async_create_task ( #15633 )
...
* Use async_create_task
* Fix test
2018-07-23 14:05:38 +02:00
2f7b79764a
More pylint 2 fixes ( #15565 )
...
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
2018-07-20 11:45:20 +03:00
6e4fb7a937
Prevent Nest component setup crash due insufficient permission. ( #14966 )
...
* Prevent Nest component setup crash due insufficient permission.
* Trigger CI
* Better error handle and address code review comments
* Lint
* Tiny wording adjust
* Notify user if async_setup_entry failed
* Return False if exception occurred in NestDevice.initialize
2018-06-25 16:06:00 -04:00
6c0fc65eaf
Bump python-nest to 4.0.3 ( #15098 )
...
Resolve network reconnect issue
2018-06-25 13:04:32 -04:00
J. Nick Koston
Quentame
Allen Porter
Ville Skyttä
Franck Nijhof
springstan
Paulus Schoutsen
Bas Nijholt
Franck Nijhof
Pascal Vizeli
cgtobi
Joakim Plate
Fabian Affolter
Jason Hu
Paulus Schoutsen
Matt Schmitt
cdce8p
Charles Garwood
Robert Svensson
Paulus Schoutsen