* Add bangolufsen integration
* add untested files to .coveragerc
* Simplify integration to media_player platform
* Remove missing files from .coveragerc
* Add beolink_set_relative_volume custom service
Tweaks
* Remove custom services
Remove grouping as it was dependent on custom services
* Update API to 3.2.1.150.0
Reduce and optimize code with feedback from joostlek
Tweaks
* Updated testing
* Remove unused options schema
* Fix bugfix setting wrong state
* Fix wrong initial state
* Bump API
* Fix Beosound Level not reconnecting properly
* Remove unused constant
* Fix wrong variable checked to determine source
* Update integration with feedback from emontnemery
* Update integration with feedback from emontnemery
* Remove unused code
* Move API client into dataclass
Fix not all config_flow exceptions caught
Tweaks
* Add Bang & Olufsen brand
* Revert "Add Bang & Olufsen brand"
This reverts commit 57b2722078.
* Remove volume options from setup
Simplify device checks
rename integration to bang_olufsen
update tests to pass
Update API
* Remove _device from base
Add _device to websocket
* Move SW version device update to websocket
Sort websocket variables
* Add WebSocket connection test
* Remove unused constants
* Remove confirmation form
Make discovered devices get added to Home Assistant immediately
Fix device not being available on mdns discovery
Change config flow aborts to forms with error
* Update tests for new config_flow
Add missing api_exception test
* Restrict manual and discovered IP addresses to IPv4
* Re-add confirmation step for zeroconf discovery
Improve error messages
Move exception mapping dict to module level
* Enable remote control WebSocket listener
* Update tests
* Mark home_plus_control a virtual integration using Netatmo
* Apply code review suggestion
Co-authored-by: Robert Resch <robert@resch.dev>
---------
Co-authored-by: Robert Resch <robert@resch.dev>
* Add authentication flows to tplink integration to enable newer device protocol support
* Add websession passing to tplink integration discover methods
* Use SmartDevice.connect()
* Update to use DeviceConfig
* Use credential hashes
* Bump python-kasa to 0.6.0.dev0
* Fix tests and address review comments
* Add autodetection for L530, P110, and L900
This adds mac address prefixes for the devices I have.
The wildcards are left quite lax assuming different series may share the same prefix.
* Bump tplink to 0.6.0.dev1
* Add config flow tests
* Use short_mac if alias is None and try legacy connect on discovery timeout
* Add config_flow tests
* Add init tests
* Migrate to aiohttp
* add some more ouis
* final
* ip change fix
* add fixmes
* fix O(n) searching
* fix O(n) searching
* move code that cannot fail outside of try block
* fix missing reauth_successful string
* add doc strings, cleanups
* error message by password
* dry
* adjust discovery timeout
* integration discovery already formats mac
* tweaks
* cleanups
* cleanups
* Update post review and fix broken tests
* Fix TODOs and FIXMEs in test_config_flow
* Add pragma no cover
* bump, apply suggestions
* remove no cover
* use iden check
* Apply suggestions from code review
* Fix branched test and update integration title
* legacy typing
* Update homeassistant/components/tplink/__init__.py
* lint
* Remove more unused consts
* Update test docstrings
* Add sdb9696 to tplink codeowners
* Update docstring on test for invalid DeviceConfig
* Update test stored credentials test
---------
Co-authored-by: Teemu Rytilahti <tpr@iki.fi>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Adding initial Epion Air integration logic
* Skipping sensors with missing data
* Patching Epion integration
* Adding additional Epion measurement types
* Cleaning up logging
* Cleaning up code
* Fixing error handling for invalid Epion keys
* Adding tests and improving error handling
* Patching Epion tests
* Cleaning up Epion integration code
* Bumping Epion package and including missing files
* Moving data updates to coordinator and addressing feedback
* Improve exception handling
* Exposing model name and firmware version
* Cleaning up code according to review
* Cleaning up code according to review
* Adding check to prevent duplicate account setup
* Refactoring tests and checking for duplicates
* Cleaning up test code according to review
* Cleaning up test code
* Removing entity name overrides
* Fix code format for tests
* Adding missing newlines in JSON files
* Fixing formatting
* Updating device method to always return a device
* Updating coordinator
* First checkin for myUplink
* Refactored coordinator and sensor state classe
* Updated .coveragerc
* Update test_config_flow
* Fix test_config_flow for myuplink
* Only set state class for temperature sensor
* PR comment updates
* Type strong dict
* use asyncio.timeouts
* PR updates (part 1)
* Updated to myuplink 0.0.9
* Add strict typing
* Fix typing
* Inherit CoordinatorEntity
* Clean up coordinator and sensors
* Use common base entity
* Improve device point sensor
* Exclude entity from coverage
* Set device point entity name if there's no entity description
* Update homeassistant/components/myuplink/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/myuplink/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/myuplink/entity.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Remvoed firmware + connstate sensors
* Always add device point parameter name
* Removed MyUplinkDeviceSensor
* Removed unused class
* key="celsius",
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* switcher: added support for device_key logic included in aioswitcher==3.4.1
* switcher: small fix
* switcher: after lint
* switcher: fix missing device_key in tests
* remove device_key function
* fix missing device_key in tests
* Add new Rabbit Air integration
* Remove py.typed file
It is not needed and was just accidentally added to the commit.
* Enable strict type checking for rabbitair component
Keeping the code fully type hinted is a good idea.
* Add missing type annotations
* Remove translation file
* Prevent data to be added to hass.data if refresh fails
* Reload the config entry when the options change
* Add missing type parameters for generics
* Avoid using assert in production code
* Move zeroconf to optional dependencies
* Remove unnecessary logging
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Remove unused keys from the manifest
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Replace property with attr
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Allow to return None for power
The type of the is_on property now allows this.
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Remove unnecessary method call
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update the python library
The new version properly re-exports names from the package root.
* Remove options flow
Scan interval should not be part of integration configuration. This was
the only option, so the options flow can be fully removed.
* Replace properties with attrs
* Remove multiline ternary operator
* Use NamedTuple for hass.data
* Remove unused logger variable
* Move async_setup_entry up in the file
* Adjust debouncer settings to use request_refresh
* Prevent status updates during the cooldown period
* Move device polling code to the update coordinator
* Fix the problem with the switch jumping back and forth
The UI seems to have a timeout of 2 seconds somewhere, which is just a
little bit less than what we normally need to get an updated state. So
the power switch would jump to its previous state and then immediately
return to the new state.
* Update the python library
The new version fixes errors when multiple requests are executed
simultaneously.
* Fix incorrect check for pending call in debouncer
This caused the polling to stop.
* Fix tests
* Update .coveragerc to exclude new file.
* Remove test for Options Flow.
* Update the existing entry when device access details change
* Add Zeroconf discovery step
* Fix tests
The ZeroconfServiceInfo constructor now requires one more argument.
* Fix typing for CoordinatorEntity
* Fix signature of async_turn_on
* Fix depreciation warnings
* Fix manifest formatting
* Fix warning about debouncer typing
relates to 5ae5ae5392
* Wait for config entry platform forwards
* Apply some of the suggested changes
* Do not put the MAC address in the title. Use a fixed title instead.
* Do not format the MAC to use as a unique ID.
* Do not catch exceptions in _async_update_data().
* Remove unused _entry field in the base entity class.
* Use the standard attribute self._attr_is_on to keep the power state.
* Store the MAC in the config entry data
* Change the order of except clauses
OSError is an ancestor class of TimeoutError, so TimeoutError should be
handled first
* Fix depreciation warnings
* Fix tests
The ZeroconfServiceInfo constructor arguments have changed.
* Fix DeviceInfo import
* Rename the method to make it clearer what it does
* Apply suggestions from code review
* Fix tests
* Change speed/mode logic to use is_on from the base class
* A zero value is more appropriate than None
since None means "unknown", but we actually know that the speed is zero
when the power is off.
---------
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add Hong Kong Observatory integration
* Move coordinator to a separate file
* Map icons to conditions
* Fix code for review
* Skip name
* Add typings to data_coordinator
* Some small fixes
* Rename coordinator.py
* Add Rainforest RAVEn integration
* Add Rainforest Automation brand
* Add diagnostics to Rainforest RAVEn integration
* Drop a test assertion for an undefined behavior
* Add DEVICE_NAME test constant
* Catch up with reality
* Use Platform.SENSOR
Co-authored-by: Robert Resch <robert@resch.dev>
* Make rainforest_raven translatable
* Stop setting device_class on unsupported scenarios
* Rename rainforest_raven.data -> rainforest_raven.coordinator
* Make _generate_unique_id more reusable
* Move device synchronization into third party library
* Switch from asyncio_timeout to asyncio.timeout
* Ignore non-electric meters
Co-authored-by: Robert Resch <robert@resch.dev>
* Drop direct dependency on iso4217, bump aioraven
* Use RAVEn-specific exceptions
* Add timeouts to data updates
* Move DeviceInfo generation from Sensor to Coordinator
* Store meter macs as strings
* Convert to using SelectSelector
* Drop test_flow_user_invalid_mac
This test isn't necessary now that SelectSelector is used.
* Implement PR feedback
- Split some long format lines
- Simplify meter mac_id extraction in diagnostics
- Expose unique_id using an attribute instead of a property
- Add a comment about the meters dictionary shallow copy
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Simplify mac address redaction
Co-authored-by: Joakim Sørensen <ludeeus@ludeeus.dev>
* Freeze RAVEnSensorEntityDescription dataclass
Co-authored-by: Erik Montnemery <erik@montnemery.com>
---------
Co-authored-by: Robert Resch <robert@resch.dev>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Joakim Sørensen <ludeeus@ludeeus.dev>
Teemu R
Josef Zweck
John Hess
J. Nick Koston
Luke Lashley
Jan Klausa
Markus Jacobsen
Duco Sebel
Michael Hansen
jan iversen
mkmer
Jan-Philipp Benecke
Michal Ziemski
Dave Leaver
Joost Lekkerkerker
Allen Porter
Koen van Zuijlen
jmwaldrip
Simone Chemelli
Franck Nijhof
Ståle Storø Hauknes
Steven B
Ernst Klamer
Joakim Plate
Matthias Alphart
Steven Looman
Marc Mueller
Robert Resch
Maikel Punie
Bouwe Westerdijk
Steve Easley
Robert Svensson
puddly
starkillerOG
Erwin Douna
Christophe Gagnier
Aaron Bach
Galorhallen
Sebastian Lövdahl
max2697
Willem-Jan van Rootselaar
G Johansson
Michael
cnico
Leendert Gravendeel
Erik Montnemery
Keilin Bickar
jjlawren
Tobias Sauerwein
Antoni Czaplicki
Daniel Gangl
Jan Rieger
Arie Catsman
Bram Kragten
Malte Franken
Peter Winkler
dcmeglio
Phil Bruckner
Christopher Bailey
Thomas Kistler
Shay Levy
bubonicbob
YogevBokobza
Abílio Costa
Eric Severance
elmurato
mkmer
Lucas Mindêllo de Andrade
Elvio
Brandon Rothweiler
wilburCforce
Alexander Somov
MisterCommand
Scott K Logan
Raman Gupta
Ash Hopkins
Tom Harris
Robbert Verbruggen
Patrick Frazer
David F. Mulcahey
Benjamin Richter