Commit Graph

539 Commits (d66bc6a873d1010833999bdae5dfe06732846bef)

Author SHA1 Message Date
Dan Smith bac8ffdd52 Bump somecomfort to 0.3.2 (#3502)
This has fixes related to #3468
2016-09-23 22:15:05 -07:00
Martin Hjelmare 8d0009b894 Fix mysensors required version for HVAC (#3499) 2016-09-23 22:07:06 +02:00
kaustubhphatak 7625aae373 Add support for mysensors HVAC device (#3405)
* Added Support for mysensnors Climate/HVAC device

* Added Support for mysensnors-hvac device:fix pylint error

* Added Support for mysensnors-hvac device:fix pylint error2

* Fixed Issues in code as per review comments

* Fixed Linter Errors

* Fixed Linter Errors:2

* Fixed Linter Errors:2

* Fixed Linter Errors

* Fixed Linter Errors

* Fixed Linter Errors

* Added Support for MySensors HVAC| Fixed Review Comments| Removed Additional Comments

* Added Support for MySensors HVAC| Fixed Review Comments Itr2

* Changes to correctly support devices with both high and low bound temperatures

* Changed to optimize the code
2016-09-22 23:47:40 -07:00
Josh Nichols b34101b277 Update Ecobee state after making changes to climate (#3436)
* Update Ecobee state after making changes to climate

Without this, climate and sensor state will take up to 3 minutes
(the MIN_TIME_BETWEEN_UPDATES on its update throttle) to update in
the interface, which makes it more difficult to do automation around the
state.

* Use a boolean instance variable that update can check, rather than always calling update
2016-09-18 13:20:06 -07:00
Jeff Wilson d7452f9d5d Add ability to set fan made to Nest climate component (#3399)
* Add ability to set fan made to Nest climate component

* Use constants for fan values

* Use STATE_ON from cost

* Fix lint error
2016-09-15 21:01:32 -07:00
Dan b58976bc36 Add operation_list to radiotherm (#3393)
* Add operation_list to radiotherm

* Use constants
2016-09-14 18:14:39 -07:00
Fabian Affolter 727b756054 Use voluptuous for KNX (#3345)
* Migrate to voluptuous

* Make host optional and set default
2016-09-13 23:03:30 -07:00
Rob Johnson 7528da455c Vera Thermostat Support (#3247)
* vera thermostat & climate support

* disable abstract

* code review changes

* fix

* fix build

* remove old method
2016-09-13 21:36:49 -07:00
Pascal Vizeli e4f4e91096 Bugfix auto/manual mode change (#3384) 2016-09-13 21:43:37 +02:00
John Arild Berentsen 898cf1b352 zxt_120 set temperature did not update on setpoint (#3380) 2016-09-13 20:26:44 +02:00
John Arild Berentsen efbc378226 Fix temp conversion for nest setpoint (#3373)
* Fix temp conversion for nest setpoint

* DEbug
2016-09-13 19:16:17 +02:00
John Arild Berentsen a69c575dab Bugfix ecobee: inverted high and low temps and enforce int to temps (#3325)
* inverted high and low temps

* Looks like somethings are mixed up

* Added debugentires

* Added debugentires 2

* Enforce int on temperatures
2016-09-12 17:40:46 +02:00
John Arild Berentsen 26abe83be5 Revert only add 1 device (#3324) 2016-09-11 21:46:14 -07:00
Fabian Affolter 11396a221e Extend schema (#3278) 2016-09-11 11:45:38 +02:00
Fabian Affolter ab826eef0d Migrate to voluptuous (#3276) 2016-09-11 11:38:43 +02:00
Fabian Affolter d20b4c17a2 Migrate to voluptuous (#3277) 2016-09-11 11:30:27 +02:00
Fabian Affolter 78313c793c Migrate to voluptuous (#3298) 2016-09-11 09:21:16 +02:00
Pascal Vizeli e87da765c5 cleanup Homematic code (#3291)
* cleanup old code

* cleanup round 2

* remove unwanted platforms
2016-09-09 19:33:12 +02:00
John Arild Berentsen ba28208106 Added stuff for support range setting (#3189) 2016-09-09 11:06:53 -06:00
Fabian Affolter 1af5d4c8b8 Minor Ecobee changes (#3131)
* Update configuration check, ordering, and constants

* Make API key optional
2016-09-07 20:21:42 +02:00
Dave Banks 3668afe306 Zwave set temperature fix (#3221)
* If device was off set target temp would not work.

* Changed to use a workaround just for Horstmann HRT4-ZW Zwave Thermostat

* Wrong Horseman id

* style changes
2016-09-07 11:22:51 +02:00
John Arild Berentsen e88e6d1030 Zwave climate fix and wink cover. (#3205)
* Fixes setpoint get was done outside loop

* zxt_120

* Wink not migrated to cover

* Clarifying debug

* too long line

* Only add 1 device entity
2016-09-06 18:34:28 -07:00
turbokongen 0907eea442 move units to temperature for climate zwave. wrong state was sent to mqtt cove 2016-09-02 10:49:53 +02:00
John Arild Berentsen a50205aedb Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.

* Just rely on unit from config for unit_of_measurement

* Explicit return None

* Mqtt (#11)

* Explicit return None

* Missing service and wrong service name defined

* Mqtt state was inverted, and never triggering
2016-09-01 22:31:25 -06:00
Pascal Vizeli dcfc1ef361 fix homematic climate implementation (#3114) 2016-09-01 22:20:55 +02:00
Fabian Affolter d2dfe04ec9 Update voluptuous for nest (#3109)
* Update configuration check
* Extend platform
2016-09-01 22:08:03 +02:00
Fabian Affolter 24d412938e Use voluptuous for HDMI CEC & CONF_DEVICES constants (#3107) 2016-09-01 22:04:00 +02:00
John Arild Berentsen 571cbdf40c If device was off target temp was null. Default to Heating setpoint (#3091) 2016-09-01 09:31:52 +02:00
John Arild Berentsen 4b12ea04d6 humidity slider (#3088) 2016-09-01 07:13:33 +02:00
John Arild Berentsen 5f664acb4f unit fix (#3083) 2016-08-31 22:30:44 +02:00
John Arild Berentsen e5b6592870 Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.

* Move order of population for first time detection

* Default to config if None unit_of_measurement
2016-08-31 21:50:03 +02:00
John Arild Berentsen 7ceb22a08b Ecobee (#3055)
* Added in list for opreation

* Added attribute to reflect the old operation

* fix humidity
2016-08-30 21:04:53 +02:00
John Arild Berentsen 2d8bc754c8 Ecobee (#3025)
* fix ecobee mode

* Fixup
2016-08-28 22:51:56 +02:00
John Arild Berentsen 2a5ca1c873 Map Modes to setpoint indexes (#3023)
* Map Modes to setpoint indexes

* Fixes devices with no thermostat mode

* another try to fix devices without mode

* another try to fix devices without mode 2

* another try to fix devices without mode 3

* fix setting setpoint for devices with no mode

* fix setting setpoint for devices with no mode
2016-08-28 22:41:48 +02:00
John Arild Berentsen 17a57d3b47 Fixes wrong statevalue and problem with zwave setpoint (#3017)
* Fixes wrong statevalue and problem with zwave setpoint

* Fix demo test to match bugfix (#10)
2016-08-28 17:58:50 +02:00
John Arild Berentsen f863efdaca Use COMMAND_CLASS_THERMOSTAT_SETPOINT to get unit_of_measurement instad of COMMAND_CLASS_SENSOR_MULTILEVEL. Not all devices have multilevel sensor. (#3003) 2016-08-27 13:39:22 +02:00
Paulus Schoutsen 23e86fc8ea Update frontend 2016-08-20 23:44:31 -07:00
Pascal Vizeli a50463d2f1 Improve homematic climate support (#2894) 2016-08-20 00:20:41 +02:00
John Arild Berentsen ada4de3ffb Migrate Thermostat and HVAC component to climate component (#2825)
* First draft for climate

* Updates for thermostats
2016-08-19 00:17:28 -07:00