* Fix webhook registration
* Only load camera platform with valid scope
* Add initial data handler and netatmo base class
* Update camera to use data handler
* Update init
* Parallelize API calls
* Remove cruft
* Minor tweaks
* Refactor data handler
* Update climate to use data handler
* Fix pylint error
* Fix climate update not getting fresh data
* Update climate data
* update to pyatmo 4.0.0
* Refactor for pyatmo 4.0.0
* Exclude from coverage until tests are written
* Fix typo
* Reduce parallel calls
* Add heating request attr
* Async get_entities
* Undo parallel updates
* Fix camera issue
* Introduce individual scan interval per device class
* Some cleanup
* Add basic webhook support for climate to improve responsiveness
* Replace ClimateDevice by ClimateEntity
* Add support for turning camera on/off
* Update camera state upon webhook events
* Guard data class registration with lock
* Capture errors
* Add light platform
* Add dis-/connect handling
* Fix set schedule service
* Remove extra calls
* Add service to set person(s) home/away
* Add service descriptions
* Improve service descriptions
* Use LightEntity instead of Light
* Add guard if no data is retrieved
* Make services entity based
* Only raise platform not ready if there is a NOC
* Register webhook even during runtime
* Fix turning off event
* Fix linter error
* Fix linter error
* Exclude light platform from coverage
* Change log level
* Refactor public weather sensor to use data handler
* Prevent too short coordinates
* Ignore modules without _id
* Code cleanup
* Fix test
* Exit early if no home data is retrieved
* Prevent discovery if already active
* Add services to (un-)register webhook
* Fix tests
* Not actually a coroutine
* Move methods to base class
* Address pylint comment
* Address pylint complaints
* Address comments
* Address more comments
* Add docstring
* Use single instance allowed
* Extract method
* Remove cruft
* Write state directly
* Fix test
* Add file to coverage
* Move nested function
* Move nested function
* Update docstring
* Clean up code
* Fix webhook bug
* Clean up listeners
* Use deque
* Clean up prints
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Rename data_class variable
* Break when match
* Extract method
* Extract methods
* Rename variable
* Improve comment
* Some refinements
* Extra
* Extract method
* Simplify code
* Improve reability
* Code simplification
* Simplify code
* Simplify code
* Code cleanup
* Fix import
* Clean up
* Clean up magic strings
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with HOMEDATA_DATA_CLASS_NAME
* Replace data_class_name in public weather sensor
* Clean up
* Remove deprecated config options
* Schedule immediate update on camera reconnect
* Use UUID to clearly identify public weather areas
* Use subscription mode
* Move clean up of temporary data classes
* Delay data class removal
* Fix linter complaints
* Adjust test
* Only setup lights if webhook are registered
* Prevent crash with old config entries
* Don't cache home ids
* Remove stale code
* Fix coordinates if entered mixed up by the user
* Move nested function
* Add test case for swapped coordinates
* Only wait for discovery entries
* Only use what I need
* Bring stuff closer to where it's used
* Auto clean up setup data classes
* Code cleanup
* Remove unneccessary lock
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/netatmo/test_config_flow.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Clean up dead code
* Fix formating
* Extend coverage
* Extend coverage
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add config flow to HLK-SW16
* Use entry_id for unique_id
* Add options update capability
* Refactor entry_id under domain
* Remove name from config
* Set options
* Remove options flow
* remove unneccesary else block from validate_input and move domain cleanup to async_unload_entry
* Add tests and config import
* Add back config schema
* Remove config import
* Refactor unload
* Add back config import
* Update coveragerc
* Don't mock validate_input
* Test duplicate configs
* Add import test
* Use patch for timeout test
* Use mock for testing timeout
* Use MockSW16Client for tests
* Check mock_calls count
* Remove unused NameExists exception
* Remove title from strings.json
* Mock setup for import test
* Set PARALLEL_UPDATES for switch
* Move hass.data.setdefault(DOMAIN, {}) to async_setup_entry
* WOLF Smart-set integration
* Removed translations. Changed device class of timestamp. Added new test for unknown exception
* Remove unit_of_measurement from hours sensor
* Code cleanup. Pull Request comments fixes
* ConnectError import change. Removed DEVICE_CLASS_TIMESTAMP
* Add unique id guard with tests. Use common translations. Move device_id resolution to config_flow.
* Remove debug print
* Created a binary sensor and corrected some review comments.
* Updated the poolsense class and its interface to handle credentials better
* Moved the client session to the PoolSense class.
* Apply suggestions from code review
* Update binary_sensor.py
* Update homeassistant/components/poolsense/__init__.py
* Update sensor.py
* Update binary_sensor.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Add public weather sensors back in
* Remove stale code
* Cleanup after before adding entities
* Fix pylint complaint
* Add test for options flow
* Change mode to listbox
* Update .coveragerc
* Address comments
* Don't process empty list
* Address comment
* Fix mistake
* Make signal unique
* Make string more unique
* Fix merge conflict
* First step of an EnOcean integration refactoring, including code reorganisation and support of a setup config flow
* Moved title to root of strings file
* Fixed pre-commit checks failures
* Fixed linter errors
* Updated formatted string format in logs
* Removed leftover comment
* Multiple changes after PR change requests.
Using an import flow for yaml config, removed unnecessary logs, added proper unload in __init__ and EnOceanDongle
Replaced config state machine by several flows.
Serial port validity check done in the EnOceanDongle class asynchronously, removed unique ID from config flow
Multiple cosmetic changes
* Multiple changes after PR change requests
* Added variable to store default value, as setdefault was caught returning None when the empty dict literal was passed as an argument
* Literal used directly
* Added tests for EnOcean config flows, changed static methods to bundle methods for bundle
* Updated variable name
* Added missing mock to test, replaced repeated magic strings by constants
* Changed imports to avoid an unused import warning from pylint on DOMAIN
* Adding pylint exception for unused import
* Added proper propagation of setup and unload to platforms, removed dead code, some syntax changes
* Removed setup_entry forwarding as the entities can only be configured using yaml
* Removed forwarding of unload
* Enabled code coverage for config flow only
* Clean up coveragerc
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Migrate Guardian to use the DataUpdateCoordinator
* Finish work
* Cleanup
* Don't use UpdateFailed error
* Code cleanup
* Code cleanup
* Remove unnecessary change
* Code review
* Code review
* Use a subclass of DataUpdateCoordinator
* Make sure to pop client upon unload
* Adjust coverage
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* add more unit tests for plum_lightpad
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
apply suggested way to invoke async_setup_entry
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
remove now unused import
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
import Mock from tests.async_mock as suggested
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
remove now unused import
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Update tests/components/plum_lightpad/test_init.py
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* fix unit tests that were failing after suggested changes
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (add changed requirements_test_all.txt)
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (bring coverage to 100%)
* add first unit test to config flow for Plum Lightpad
* add first unit test to config flow for Plum Lightpad (updated patch path as suggested)
* add first unit test to config flow for Plum Lightpad (add unit test for abort)
* Added GLOB capability to entityfilter and every place that uses it. All existing tests are passing
* added tests for components affected by glob change
* fixed flake8 error
* mocking the correct listener
* mocking correct bus method in azure test
* tests passing in 3.7 and 3.8
* fixed formatting issue from rebase/conflict
* Checking against glob patterns in more performant way
* perf improvments and reverted unnecessarily adjusted tests
* added new benchmark test around filters
* no longer using get with default in entityfilter
* changed filter name and removed logbook from filter benchmark
* simplified benchmark tests from feedback
* fixed apache tests and returned include exclude schemas to normal
* fixed azure event hub tests to properly go through component logic
* fixed azure test and clean up for other tests
* renaming test files to match standard
* merged mqtt statestream test changes with base
* removed dependency on recorder filter schema from history
* fixed recorder tests after merge and a bunch of lint errors
* Squeezebox add config flow and player discovery
* Fixes to config flow
* Unavailable player detection and recovery
* Improved error message for auth failure
* Testing for squeezebox config flow
* Import configuration.yaml
* Support for discovery integration
* Internal server discovery
* Fix bug restoring previously detected squeezebox player
* Tests for user and edit steps in config flow
* Tests for import config flow
* Additional config flow tests and fixes
* Linter fixes
* Check that players are found before iterating them
* Remove noisy logger message
* Update requirements_all after rebase
* Use asyncio.Event in discovery task
* Use common keys in strings.json
* Bump pysqueezebox to v0.2.2 for fixed server discovery using python3.7
* Bump pysqueezebox version to v0.2.3
* Don't trap AbortFlow exception
Co-authored-by: J. Nick Koston <nick@koston.org>
* Refactor validate_input
* Update squeezebox tests
* Build data flow schema using function
* Fix linter error
* Updated en.json
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update .coveragerc for squeezebox config flow test
* Mock TIMEOUT for faster testing
* More schema de-duplication and testing improvements
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Testing and config flow improvements
* Remove unused exceptions
* Remove deprecated logger message
* Update homeassistant/components/squeezebox/media_player.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Implement suggestions from code review
* Add async_unload_entry
* Use MockConfigEntry in squeezebox tests
* Remove unnecessary config schema
* Stop server discovery task when last config entry unloaded
* Improvements to async_unload_entry
* Fix bug in _discovery arguments
* Do not await server discovery in async_setup_entry
* Do not await start server discovery in async_setup
* Do not start server discovery from async_setup_entry until homeassistant running
* Re-detect players when server removed and re-added without restart
* Use entry.entry_id instead of unique_id
* Update unittests to avoid patching homeassistant code
Co-authored-by: J. Nick Koston <nick@koston.org>
* initial commit
* small corrections
* fix linting error
* add new files to coveragerc
* rename devolo_sensor to devolo_device
* use correct import
* use binary_switch platform
* use binary_switch platform
* add binary_sensor to coverage
* adjustments according PR review
* make super call easier to read
* use f-string instead of concatenating
* update docstrings - remove device_id property
* add will_remove_from_hass
* Add config_flow to the dunehd integration
* Add tests
* Run gen_requirements_all
* Fix pylint error
* Better hostname validation
* Build device info in the class
* Add switch component
* Update homeassistant/components/plugwise/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/plugwise/switch.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Improvements by @bdraco
Co-authored-by: J. Nick Koston <nick@koston.org>
- add Synology DSM Security binary sensor (enabled by default)
- use device name instead of id in names
- add device type to name
- show disk manufacturer, model and firmware version in devices
- some entries are disabled by default (`entity_registry_enabled_default`)
- binary sensor + sensor uses `device_class` when possible
- do not fetch a concerned API if all entries of it are disabled
- entity unique_id now uses key instead of label
- entity entity_id changes for disk and volume: example from `sensor.synology_status_sda` to `sensor.synology_drive_1_status`, or from `sensor.synology_average_disk_temp_volume_1` to `sensor.synology_volume_1_average_disk_temp`
- now binary sensor:
- disk_exceed_bad_sector_thr
- disk_below_remain_life_thr
- removed sensor:
- volume type (RAID, SHR ...)
- disk name (Drive [X])
- disk device (/dev/sd[Y])
Markus Bong
Quentame
Aidan Timson
J. Nick Koston
cgtobi
James Hilliard
Xiaonan Shen
Maciej Bieniek
Rob Bierbooms
On Freund
RogerSelwyn
Adam Król
lawtancool
Perry Naseck
Haemish Kyd
jduquennoy
Aaron Bach
Baptiste Candellier
Eugene Prystupa
mdegat01
bsmappee
Thomas Le Gentil
Franck Nijhof
rajlaud
starkillerOG
Philip Allgaier
Kevin Fronczak
Tom Schneider
Tim van Cann
Alexey Kustov
Tom