* Unavailable state introduced if the device isn't reachable.
A new configuration option "model" can be used to define the device type.
```
light:
- platform: xiaomi_miio
name: Xiaomi Philips Smart LED Ball
host: 192.168.130.67
token: da548d86f55996413d82eea94279d2ff
# Bypass of the device model detection.
# Optional but required to add an unavailable device
model: philips.light.bulb
```
New attribute "scene" and "delay_off_countdown" added.
New service xiaomi_miio_set_delay_off introduced.
* Service xiaomi_miio_set_delayed_turn_off updated. The attribute "delayed_turn_off" is a timestamp now.
* None must be a valid model.
* Math.
* Microseconds removed because of the low resolution.
* Comment updated.
* Update the ATTR_DELAYED_TURN_OFF on a deviation of 4 seconds (max latency) only.
* Import of datetime fixed.
* Typo fixed.
* pylint issues fixed.
* Naming.
* Service parameter renamed.
* New ceiling lamp model (philips.light.zyceiling) added.
* Use positive timedelta instead of seconds.
* Use a unique data key per domain.
* Merge from current dev
* Update for Sensor approach
* Update reference to state classes
* Reference stateKey correctly
* Reference stateKey
* Change deviceInfo to a dict
* Pass state to properties method
* Add state info to device_state_attributes
* Update entity name to include state name
* Update for on() off() vs light_on/off
* Flag newnames option
* Update configuration schema
* Update configuration schema
* Spell False correctly
* Rename state to statekey
* Rename statekey to stateKey
* Call new device with stateKey and newname
* Simplify use of newnames
* Add workdir to save devices
* Fix newnames config setup
* Propogate OnOffSensor to VariableSensor change
* Upgrade insteonplm version to 0.8.0
* Pass address rather than device object to platform
* Set inteon_plm data variable to PLM
* Consistant use of conn and plm
* Consistant use of conn and plm
* Proper reference to device and address
* Fixed platform setup issues
* Correct issue with missing _supported_features attr
* Properly reference self._state vs self.state
* Bump insteonplm version to 0.8.1
* Remove subplatform and map based on state name
* Correct refrence to State
* Correct reference to device.states
* Bump insteonplm to 0.8.2
* Fix format errors
* Fix format issues
* Fix trailing whitespace
* Correct format issues
* Fix format issues
* Fix format issues
* Fixed format issues
* Fixed format issues
* Move imports inside classes
* Simplify import of modules
* Correct reference to OnOffSwitch_OutletTop and bottom
* Remove unnessary references
* Fix format issues
* Code review adjustments
* Fix format issue
* Use new nameing format for groups that are not group 0x01
* Remove newname feature
* Fix binary_sensor type to default to None
* Fix device_class property to return the sensor type correctly.
* rename _device and _state to avoid conflicts with Entity
* Format long lines
* Pylint clean up
* Insteon_PLM
* lint cleanup
* Check device_override has address
* 3.4 lint clean up
* Changes per code review
* Change discovered from a list of dict to a dict
* Correct common_attributes usage
* Change discovered from a list of dict to a dict
* Add debugging message to confirm platform setup
* Debug messages
* Debug messages
* Debug async_added_to_hass
* Debug async_added_to_hass async_add_job
* Debug async_added_to_hass
* Debug devices not loading in hass
* Debug new entities not being added to hass
* Debug adding devices to hass
* Revert "3.4 lint clean up"
This reverts commit 0d8fb992b1.
* 3.4 lint clean up
* Revert "Debug adding devices to hass"
This reverts commit ec306773d4.
* Revert "Debug new entities not being added to hass"
This reverts commit 55fb724d06.
* Revert "Debug devices not loading in hass"
This reverts commit 07814b4f14.
* Revert "Debug async_added_to_hass"
This reverts commit 4963a255d8.
* Revert "Debug async_added_to_hass async_add_job"
This reverts commit 22cadff91f.
* Revert "Debug async_added_to_hass"
This reverts commit 12c5651fe4.
* Pylint clean up
* pylint cleanup
* Clean up naming
* Enhance config schema. Fix logging issue
* Reapply changes after squash
* Improve service by allowing to reference entity id instead of deconz id
* Change from having access to full entities to only store entity id together with deconz id
* Don't use eval, there is a dict type for voluptuous
* Use entity registry instead of keeping a local registry over entity ids
* Removed old code
* Add test for get_entry
* Bump dependency to v28
Fixed call to protected member
* Use chain to iterate over dict values
* Cleanup
* Fix hound comment
* Cleanup
* Follow refactoring of entity
* Revert to using a local registry
* Remove unused import
* self.hass is automatically available when entity is registered in hass
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
* Entity#unique_id defaults to None
* Initial commit entity registry
* Clean up unique_id property
* Lint
* Add tests to entity component
* Lint
* Restore some unique ids
* Spelling
* Remove use of IP address for unique ID
* Add tests
* Add tests
* Fix tests
* Add some docs
* Add one more test
* Fix new test…
* Multi-Room Support for Greenwave Reality
* PEP8 Line Too Long
* Update requirements_all.txt
* Shared State Object
Shared State Object added, and implemented new function of greenwavereality to abstract complex runtimes.
* Update requirements_all.txt
* Lint issues
* Rewrite method to not trigger "Method could be a function"
* Remove unnecessary arguments for update call
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* fixed error with wrong arguments number during callback call
* reset unavailability state on new message received from device
* use locks to fix race condition during managing _state property
* overriden state() method for some components to check for STATE_UNAVAILABLE and return it instead e.g. STATE_OFF
* fixed linter
* removed blank line
* use available() method instead of changing _state
* filter motion sensors 'heartbeat', was removed from PyXiaomiGateway
* remove self._hass, use self.hass set by HA on attach
* self.push_data now running in the event loop, use async_schedule_update_ha_state()
* merge fix
* removed accidentally added home-assistant-polymer
* bump PyXiaomiGateway version to 0.8.0
* bump PyXiaomiGateway to 0.8.0
* updated methods names and annotations
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Updated requirements_all.txt with gen_requirements_app.py
* Pylint fix: No space allowed around keyword argument assignment
* PR review changes
* Moved auto setup from platforms to ihc component
* Do no auto setup if there are no IHC products found
* Changes from PR review
* Updated bluepy to version 1.1.4 as some issues with the native code were fixed there.
* Miflora - Added support for bluepy backend.
* miflora - now using bluepy backend on linux platforms
* fixed pylint findings
* miflora now using bluepy as default bluetooth backend and gatttool as fallback
* fixed hound complaints
* fixed pylint warning
* updated requirements
* Update miflora.py
* Service for setting a fixed scene introduced.
Fixes https://github.com/syssi/philipslight/issues/6.
Fixes https://github.com/home-assistant/home-assistant/issues/10458.
* Service description added.
* Typo fixed.
* Error message updated and naming improved.
* Name ("scene") of the method parameter aligned.
* Hound error fixed: Spaces removed.
* async_setup_platform method simplified.
* Lazy loading of service descriptions.
* Unused import removed.
* Wemo Dimmer Support
Add support for the Wemo Dimmer Switch
* Add newline at end of file
Re: findings from hound
* Syntax for the hound
Sorry for the excess edits, new to python
* Change order of Models
Fixed order back to ABC order
* Changes as requested
I made the changes I was comfortable with at this point, the dimmer addition now very closely mirrors what is under the switch component, at least as far as the parts necessary for the dimmer.
Any changes past these with regards to the subscription registry / callback info is probably going to be over my head, but I will try to look deeper at them if required.
* Remove unnecessary lines
Removed self.schedule_update_ha_state() from turn off / turn on
* Remove update(self)
Removed update method
* Move subscription to async_added_to_hass
* Move subscription.
* Clean up.
* Wait until the job in the executor is done
* Run gen_requirements_all script
* Only update instance attributes via callback
* Hyperion: Add brightness, HDMI and effect support
- added brightness support to dim the hyperion light
- changed the "OFF" command to set the color to [0,0,0] after clearing all priorities.
This is neccesary to keep the light turned off when an HDMI grabber is used for ambilight with hyperion.
- added HDMI ambilight mode recognition and control.
by setting the "hdmi_priority" in your "configuration.yaml" file (defaults to 880), home assistant will now be able to recognize when the hyperion light is in HDMI ambilight mode and will change its icon to an HDMI symbol and set the status to ON.
Switching the hyperion light to HDMI ambilight mode can be done through the effect option (clears all priorities such that the HDMI grabber remains).
- added effect support for the default effects of hyperion, a custom list can be defined in the "configuration.yaml" file by using the "effect_list" option.
* Hyperion: Add brightness, HDMI and effect support
- added brightness support to dim the hyperion light
- changed the "OFF" command to set the color to [0,0,0] after clearing all priorities.
This is neccesary to keep the light turned off when an HDMI grabber is used for ambilight with hyperion.
- added HDMI ambilight mode recognition and control.
by setting the "hdmi_priority" in your "configuration.yaml" file (defaults to 880), home assistant will now be able to recognize when the hyperion light is in HDMI ambilight mode and will change its icon to an HDMI symbol and set the status to ON.
Switching the hyperion light to HDMI ambilight mode can be done through the effect option (clears all priorities such that the HDMI grabber remains).
- added effect support for the default effects of hyperion, a custom list can be defined in the "configuration.yaml" file by using the "effect_list" option.
- fixed some style issues with too long lines
* Hyperion: Add brightness, HDMI and effect support
- fixed some more indentation style issues
* Hyperion: Add brightness, HDMI and effect support
- yet more fixed visuel indent issues
* Hyperion: Add brightness, HDMI and effect support
- more visuel indents
* Hyperion: Add brightness, HDMI and effect support
- fixed invalid variable "A"
* Hyperion: Add brightness, HDMI and effect support
- remove unnececary brackets
- specify specific exceptions
* correct changing state holding attributes during a service method
Proccesed the comments of @MartinHjelmare: https://github.com/home-assistant/home-assistant/pull/11543#pullrequestreview-88328659
* indent correction
corrected tab instead of 4 spaces
* Hyperion: Add brightness, HDMI and effect support
- changed 'none' to None
- renamed "self._skip_check" to "self._skip_update"
* Add brightness, HDMI and effect support
changed checking if a list is empty from "list == []" to "not list"
* Deprecate explicit entity_id in template platforms
* Use config validator for deprecation
* Fix copy/paste typos
* Also print the config value
* Add test for config validator
* Assert the module name that logged the message
* trying to rework device discovery. now the main component will do the getlinked and pass it to the sub-components. no longer any config needed other than what is needed to connect to the hub. device names are no longer stored. core team told us to stop using configurator to ask for names. there should be a way to set names in hass...possibly this https://home-assistant.io/docs/configuration/customizing-devices/
* fix device types
* make device names just be the isnteon device id
* revert some config changes
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* update insteon client
* linting fixes
* Error Clean up
* Update to make requested changes
* more changes
* Finish requested changes to components
* Fixing Rebase Conflicts
* fix device types
* make device names just be the isnteon device id
* revert some config changes
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* update insteon client
* linting fixes
* Error Clean up
* Update to make requested changes
* more changes
* Finish requested changes to components
* Update Insteon_Local for performance improvements
* Fix errors from get_linked
* Fix typo
* Requested changes
* Fix spacing
* Clean up
* Requested Changes
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
* Add new iGlo component
* Missing comma
Add extra blank lines
* Dont change state in turn_on
Remove unused variables
Update before add
* Fixing some lint issues
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
Reverts energy and power unit conversions added in #10979 as they break
early devices.
A proper fix should be implemented in the pyhs100 library which should
return common units across all devices/firmwares.
* Use different colour channel intensities in tests
Uses a different value for each colour channel in MQTT light tests to
properly differentiate between colour channels.
* Correct ordering of RGB channels in MQTT light
* Correct units used in TP-Link energy monioring
- Energy is measured in kWh for swtches
- Power is reported in mW for bulbs
- Energy is reported in Wh for bulbs
* TP-Ling energy: store units in attribute names
Stores the unit in the attrbute names for TP-Link devices that support
energy monitoring.
* Huge ISY994 platform cleanup, fixes support for 5.0.10 firmware
# * No more globals - store on hass.data
# * Parent ISY994 component handles categorizing nodes in to Hass components, rather than each individual domain filtering all nodes themselves
# * Remove hidden string, replace with ignore string. Hidden should be done via the customize block; ignore fully prevents the node from getting a Hass entity
# * Removed a few unused methods in the ISYDevice class
# * Cleaned up the hostname parsing
# * Removed broken logic in the fan Program component. It was setting properties that have no setters
# * Added the missing SUPPORTED_FEATURES to the fan component to indicate that it can set speed
# * Added better error handling and a log warning when an ISY994 program entity fails to initialize
# * Cleaned up a few instances of unecessarily complicated logic paths, and other cases of unnecessary logic that is already handled by base classes
* Use `super()` instead of explicit base class calls
* Move `hass` argument to first position
* Use str.format instead of string addition
* Move program structure building and validation to component
Removes the need for a bunch of duplicate exception handling in each individual platform
* Fix climate nodes, fix climate names, add config to disable climate
Sensor platform was crashing when the ISY reported climate nodes. Logic has been fixed. Also added a config option to prevent climate sensors from getting imported from the ISY. Also replace the underscore from climate node names with spaces so they default to friendly names.
* Space missing in error message
* Fix string comparison to use `==`
* Explicitly check for attributes rather than catch AttributeError
Also removes two stray debug lines
* Remove null checks on hass.data, as they are always null at this point
* Improve support for multiple Hue bridges with lights that have the same id.
The old code pre-refactoring kept a per-bridge list of lights in a closure; my refactoring moved that to hass.data, which is convenient but caused them to conflict with each other.
Fixes#11183
* Update test_hue.py
* Fix X10 commands for mochad light turn on
This commit attempts to address issues that a lot of people are having
with the x10 light component. Originally this was written to use the
xdim (extended dim) X10 command. However, not every X10 dimmer device
supports the xdim command. Additionally, it turns out the number of
dim/brighness levels the X10 device supports is device specific and
there is no way to detect this (given the mostly 1 way nature of X10)
To address these issues, this commit removes the usage of xdim and
instead relies on using the 'on' command and the 'dim' command. This
should work on all x10 light devices. In an attempt to address the
different dim/brightness levels supported by different devices this
commit also adds a new optional config value, 'brightness_levels', to
specify if it's either 32, 64, or 256. By default 32 levels are used
as this is the normal case and what is documented by mochad.
Fixes#8943
* make code more readable
* fix style
* fix lint
* fix tests
* Introduce a new Hue component that knows how to talk to a Hue bridge, but doesn't actually set up lights.
* Refactor the hue lights platform to use the HueBridge class from the hue component.
* Reimplement support for multiple bridges
* Auto discover bridges.
* Provide some migration support by showing a persistent notification.
* Address most feedback from code review.
* Call load_platform from inside HueBridge.setup passing the bridge id.
Not only this looks nicer, but it also nicely solves additional bridges being added after initial setup (e.g. pairing a second bridge should work now, I believe it required a restart before).
* Add a unit test for hue_activate_scene
* Address feedback from code review.
* After feedback from @andrey-git I was able to find a way to not import phue in tests, yay!
* Inject a mock phue in a couple of places
All mochad devices are sharing a single socket interface. When multiple
threads are issuing requests to the mochad daemon at the same time the
write read cycle might get crossed between the threads. This is normally
not an issue for 1-way X10 devices because as long as the request issued
successfully and data is read over the socket then we know as much as
mochad will tell us (since there is no ACK from the request for most
X10 devices). However, where it does matter is on the device __init__()
because we're relying on the mochad daemon's internal state to take an
educated guess at the device's state to intialize things with. When
there are multiple devices being initialized at the same time the wires
can get crossed between and the wrong device state may be read.
To address this potential issue this commit adds locking using a
semaphore around all pairs of send_cmd() and read_data() (which is what
pymochad.device.Device.get_status() does internally) calls to the mochad
controller to ensure we're only ever dealing with a single request at a
time.
Fixesmtreinish/pymochad#4
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f823.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Refactored to new global json saving and loading
* Fixed emulated_hue tests
* Removed unnecassary error handling
* Added missing newline
* Remove unused imports
* Fixed linting error
* Moved _load_json wrapper out of the config class
When lights in the hue component are used with the emulated hue component ATTR_EMULATED_HUE is still being used, which was deprecated by #9382. This updates ATTR_EMULATED_HUE to ATTR_EMULATED_HUE_HIDDEN to improve consistency and stop the deprecation warnings.
* Added ability to control when the on command is sent.
* Changed to allow only brightness command
* Code cleanup
* Added test cases for on command mode.
* Added addition test
* Changed brightness options to lower case.
* Fixed case of default value
* Remove default
* Xiaomi Air Purifier 2 integration
* Flake8 errors fixed.
Changes based on review.
* Service domain ("fan") updated and services properly prefixed by xiaomi_miio.
* The underlying library is called python-miio now. Imports and requirements updated.
* Version bumped. The underlying library is called python-miio now.
* Add emeter attributes.
* Remove unused attributes.
* Rework supported features so it only queries the bulb once.
* Used cached supported_features, catch errors if energy usage not reported.
* New Skybell platform with components
* Added skybell components to omit.
* Preemptively fixing lint issues (hopefully).
* Removed unused variable.
* Requested changes.
* Additional CRs
* Hopefully the last of the CR's!
* bump the pyhs100 version and fix api changes
* switch.tplink: avoid I/O during __init__
* initialize _name to None in __init__
* update requirements_all.txt for the new version
With this optimization we can send a single UDP packet to the light rather
than one packet per zone (up to 80 packets for LIFX Z). This removes a
potential multi-second latency on the frontend color picker.
The aiolifx 0.6.0 release fixes an issue where an effect color could
remain set after stopping the effect. This only affected multi-zone
lights (i.e. LIFX Z) and only if the effect was stopped by setting
the light brightness or the color (but not both).
The aiolifx 0.6.0 release also defaults end_index to start_index+7,
so we can remove that argument.
Finally, aiolifx_effects 0.1.2 adds support for aiolifx 0.6.0.
* renamed add_devices to async_add_devices according to hass naming scheme
* replaced some occurencies of async_add_entites to async_add_devices
* fixed unit test
* fixed unit test
* Updated to latest AbodePy version. Added services and events. Added new device types. Added exclude, light, and polling config options.
* Disable the event service if polling is enabled.
* Addressed all CR's
* Removed duplicated super call.
* Name config option now used. Removed deprecated DEFAULT_NAME.
* Modified partial to move event to first param.
* rename xiaomi to xiaomi_aqara
* rename xiaomi vacuum and xiaomi phillips light to xiaomi miio
* update discovery and tests
* style
* update discovery and tests
* Still use Philips as name
* Update tradfri.py
## 201709013: set_hex_color() seems not to work in pytradfri api - set_rgb_color() does
## -> changed function set_hex_color() to set_rgb_color()
## tested w. IKEA tradfri GW and zigbee rgb PWM module (dresden elektronik FLS-PP lp)
* Update tradfri.py
Setup:
Home Assistant 0.53.0
pytradfri 2.2
IKEA tradfri gateway fw 1.1.0015
zigbee rgb PWM module (dresden elektronik FLS-PP lp)
Issue:
pytradfri's set_hex_color() does not work for arbitrary colors with the current IKEA tradfri gateway. Only setting rgb hex values (param 5706) of some predefined colors has the desired effect. Others will fall back to one predefined value. I assume, the GW doesn't allow for values deviating from the predefined values.
However, pytradfri's set_rgb_color() does also work for arbitrary colors. Latest pytradfri (2.2/PR51?) will convert rgb to xy and send xy thru the GW (param 5709 and 5710).
-> changed the function used from set_hex_color() to set_rgb_color() in HA's component\light\tradfri
Result:
Full RGB support with arbitrary colors with my setup.
Unfortunately I cannot test tradfri GW with other bulbs (no have hue/lightify bulbs).
___
Predefined colors from <https://github.com/ggravlingen/pytradfri/pull/51>:
this.f3891b = new HashMap();
this.f3891b.put("f5faf6", new C1386c(0.3804d, 0.3804d, "f5faf6", 0.54d));
this.f3891b.put("f1e0b5", new C1386c(0.4599d, 0.4106d, "CCT_LIGHT_NEUTRAL", 0.61d));
this.f3891b.put("efd275", new C1386c(0.5056d, 0.4152d, "efd275", 0.66d));
this.f3891b.put("dcf0f8", new C1386c(0.3221d, 0.3317d, "dcf0f8", 0.45d));
this.f3891b.put("eaf6fb", new C1386c(0.3451d, 0.3451d, "eaf6fb", 0.48d));
this.f3891b.put("f5faf6", new C1386c(0.3804d, 0.3804d, "f5faf6", 0.54d));
this.f3891b.put("f2eccf", new C1386c(0.4369d, 0.4041d, "f2eccf", 0.59d));
this.f3891b.put("CCT_LIGHT_NEUTRAL", new C1386c(0.4599d, 0.4106d, "CCT_LIGHT_NEUTRAL", 0.61d));
this.f3891b.put("efd275", new C1386c(0.5056d, 0.4152d, "efd275", 0.66d));
this.f3891b.put("ebb63e", new C1386c(0.5516d, 0.4075d, "ebb63e", 0.68d));
this.f3891b.put("e78834", new C1386c(0.58d, 0.38d, "e78834", 0.69d));
this.f3891b.put("e57345", new C1386c(0.58d, 0.35d, "e57345", 0.67d));
this.f3891b.put("da5d41", new C1386c(0.62d, 0.34d, "da5d41", 0.7d));
this.f3891b.put("dc4b31", new C1386c(0.66d, 0.32d, "dc4b31", 0.73d));
this.f3891b.put("e491af", new C1386c(0.5d, 0.28d, "e491af", 0.57d));
this.f3891b.put("e8bedd", new C1386c(0.45d, 0.28d, "e8bedd", 0.53d));
this.f3891b.put("d9337c", new C1386c(0.5d, 0.24d, "d9337c", 0.55d));
this.f3891b.put("c984bb", new C1386c(0.34d, 0.19d, "c984bb", 0.38d));
this.f3891b.put("8f2686", new C1386c(0.31d, 0.12d, "8f2686", 0.33d));
this.f3891b.put("4a418a", new C1386c(0.17d, 0.05d, "4a418a", 0.18d));
this.f3891b.put("6c83ba", new C1386c(0.2d, 0.1d, "6c83ba", 0.22d));
this.f3891b.put("a9d62b", new C1386c(0.4099999964237213d, 0.5099999904632568d, "a9d62b", 0.654d));
this.f3891b.put("d6e44b", new C1386c(0.44999998807907104d, 0.4699999988079071d, "d6e44b", 0.65d));
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
* Tado Fix#8606
Handle case where 'mode' and 'fanSpeed' are missing JSON. Based on
changes in commit
adfb608f86
* Expose hue group 0 to HA #8652
If allow_hue_groups is set expose "All Hue Lights" group for "special
group 0". This does add an additional Hue API call for every refresh
(approx 30 secs) to get the status of the special group 0 because it's
not included in the full API pull that currently occurs.
* Revert "Expose hue group 0 to HA #8652"
This reverts commit db7fe47ec7.
* Expose hue group 0 to HA #8652
If allow_hue_groups is set expose "All Hue Lights" group for "special
group 0". This does add an additional Hue API call for every refresh
(approx 30 secs) to get the status of the special group 0 because it's
not included in the full API pull that currently occurs.
* Changes per review by balloob
1) Use all_lights instead of all_lamps
2) Fix line lengths and trailing whitespace
3) Move "All Hue Lights" to GROUP_NAME_ALL_HUE_LIGHTS constant
* Make "All Hue Lights" a constant
* Fix trailing whitespace
* [light.tradfri] Support for pytradfri version supporting full white spectrum
* [light.tradfri] Checkout pytradfri master
* Developer docker image adjusted
* [light.tradfri] pytradfri 2.2 support for white spectrum bulbs
* Removed fix already included in dev
* Style adjusted
* pylint false positive overriden
* Review remarks applied (#1)
* make pylint happy
* Review remarks
* Adds support for the Xiaomi Philips LED Ball and Ceiling Lamp
* Documentation url updated.
* New component to .coveragerc added.
* Unused import removed.
* translate labeled as static method.
* Mixed parameters in log message fixed.
* Order of requirements_all.txt fixed.
* Plattform updated. It's async now.
* Simplifiable if-statement fixed.
* Some more clean-up of unneeded stuff.
* Platform schema updated.
* Component is called xiaomi_philipslight now.
* Requirements all updated.
* Initialization of some variables updated.
* Raise PlatformNotReady exception if light cannot be discovered.
* Import of math removed.
Missing space added.
* Remove unnecessary updates
* Refactor mysensors callback and add validation
* Add mysensors entity class. The mysensors entity class inherits from
a more general mysensors device class.
* Extract mysensors name function.
* Add setup_mysensors_platform for mysensors platforms.
* Add mysensors const schemas.
* Update mysensors callback and add child validation.
* Remove gateway wrapper class.
* Add better logging for mysensors callback.
* Add discover_persistent_devices function.
* Remove discovery in mysensors component setup.
* Clean up gateway storage in hass.data.
* Update all mysensors platforms.
* Add repr for MySensorsNotificationDevice.
* Fix bug in mysensors climate target temperatures.
* Clean up platforms. Child validation simplifies assumptions in
platforms.
* Remove not needed try except statements. All messages are validated
already in pymysensors.
* Clean up logging.
* Add timer debug logging if callback is slow.
* Upgrade pymysensors to 0.11.0.
* Make dispatch callback async
* Pass tuple device_args and optional add_devices
* Also return new_devices as list instead of dictionary.
Sebastian Muszynski
Jesse Hills
Adam Mills
Tom Harris
Paulus Schoutsen
Julius Mittenzwei
Anders Melchiorsen
rubenverhoef
Andrey
Kane610
Otto Winter
Slava
Russell Cloran
ErnstEeldert
Paul Annekov
Ville Skyttä
Otto Winter
David Fiel
Fabian Affolter
Jens Østergaard Nielsen
ChristianKuehnel
Martin Rowan
starkillerOG
Daniel Høyer Iversen
Dan Nixon
Russell Cloran
angel12
Jason Kölker
Kees Schollaart
Andrea Campi
Cameron Llewellyn
cdce8p
Greg Laabs
Dan Chen
Khole
Matthew Treinish
Pascal Vizeli
Alan Fischer
Stefan Lehmann
chocomega
Maciej Sokołowski
Bart S
Rendili
Lewis Juggins
Markus Nigbur
Matthew Donoughe
Stefan Jonasson
Patrik
vatir
Ted Drain
Mark Jozefiak
Aaron Bach
Hydreliox
Sean Gollschewsky
Bahnburner
Teemu R
Mister Wil
Florian Klien
Johan Bloemberg
Paul Sokolovsky
Michael Prokop
rollbrettler
spektren
Konstantin Belyalov
Phil Cole
upsert
John K. Luebs
Martin Hjelmare