* XKNX improvements: Added Scene support, added support for exposing sensors to KNX bus, added reset value option for binary switches
* fixed import
* Bumped version of KNX library (minor upgrade with two important bugfixes)
* bumped version of xknx (now without python requirement *sigh*)
* Issue #11978: fixed review comments
* Issue #11978: hound suggestion fixed:
* review comments
* made async functions async
* Addressed issues mentined by @MartinHjelmare
* removed default=None from validation schema
* ATTR_ENTITY_ID->CONF_ENTITY_ID
* moved missing function to async syntax
* pylint
* Trigger notification
* Trigger notification
* fixed review comment
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
This reverts commit cadd797200.
As discussed within #10708 we should chose a different implementation. Therefore we should revert this change to avoid a breaking change.
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
* Added a service to write to KNX group addressed including documentation
* Define parameters as required
* Reformating
* Moved service documentation to service.yaml
* Moved service documentation to services.yaml
* Update knx.py
* Add address-specific KNX listeners that fire events on the HASS bus
* Added docstring
1-byte messages will be converted from a list to the value
* Formating
1. The has_attributes was comparing names to addresses
2. Some errors outside of an except block were using
_LOGGER.except. This will cause an exception itself because there is no
trance context available to the logger
3. Added alias names for the address and state addresses so that they
can be accessed with the same
4. Added return values for the set_int_value and set_percentage methods
to allow error checking similar to the set_value method
5. Added the name of the configured object to the log messages to make
them more meaningful (otherwise multiple similar log messages are
received without any hint as to the target device)
* add knx cover
also corrected bugs in device config
1. overwriting of addresses in KNXMultiAddressDevice
2. setting and getting int values
3. added percentage scaling
* Update __init__.py
#7429 describes a TypeError that is raised if the port is omitted in the config for the KNX component (integer is required (got type str)). This commit changes the default port from a string to an integer. I expect this will resolve that issue...
* Major rewrite of the KNX multi address device. This class wasn't used before, but the new class will be the base for the LNX thermostat module
* newer KNXIP version needed as the previous version had a serious bug
* Update knxip to later version
* Added thermostat module
* First implementation of a KNX thermostat module
* Minor cleanup
* Removed unsed code
* Implementation of a KNX platform driver and a KNX switch
* Starting working on a KNX thermostat implementation
* Removed KNX thermostat implementation from this branch again
* Make gateway parameter optional (can be auto-detected in many cases)
* Removed check for double initialisation
* KNX messages now will be handled internally and not send to the Home Assistant message bus
* Call update_ha_state only if should_poll is false
* Removed unused HASS variable
* knxip library version changed
* pylint optimization
Julius Mittenzwei
Fabian Affolter
Michael Prokop
Open Home Automation
Paulus Schoutsen
Will W
Josh Wright
Gert-Jan van de Streek
Daniel Matuschek