So far the Flo integration only supports shutoff valves. Add support for Flo leak detector pucks, which measure temperature and humidity in addition to providing leak alerts.
* Use SwitchEntity instead of ToggleEntity and adjust test patches as recommended
* Move async_create_entry out of try block in config_flow
* Patch pypi package instead of HA code
* Bump pylitterbot to 2021.2.6, fix tests, and implement other code review suggestions
* Bump pylitterbot to 2021.2.8, remove sleep mode start/end time from vacuum, adjust and add sensors for sleep mode start/end time
* Move icon helper back to Litter-Robot component and isoformat times on time sensors
* Improve restoring data and better handling when the restore data is empty
Improve readability of some logic related to POE clients
* There is no need to check clients_all in Switch platform
* Add better tests when restoring state
* Port except handling shouldn't be needed anymore
* Walrusify get_last_state
* Increase coverage of init
* Increase coverage of config_flow
* Improve coverage of controller
* Minor improvement to switch test
* Fix review comment
* Mock websocket class
* Replace the rest of the old websocket event tests
* Improve websocket fixture for cleaner tests
* Fix typing
* Improve connection state signalling based on Martins feedback
* Improve tests of reconnection_mechanisms based on Martins review comments
* Fix unload entry
* Fix isort issue after rebase
* Fix martins comment on not using caplog
* Fix wireless clients test
* Fix martins comments on wireless clients test
* Initial prototype of automation tracing
* Small fixes
* Lint
* Move trace helpers to its own file
* Improve trace for state and numeric_state conditions
* Tweaks + apply suggestions from code review
* Index traces by automation_id, trace while script is running
* Refactor condition tracing
* Improve WS API to get traces for single automation
* Add tests
* Fix imports
* Fix imports
* Address review comments
* Cap logging of loops
* Remove unused ContextVar action_config
* A platform is not a component
* Fix dynalite
* SUPPORTED_PLATFORMS --> PLATFORMS
* In tests
* In tests 2
* Fix SmartThings
* Fix ZHA test
* Fix Z-Wave
* Revert Z-Wave
* Use PLATFORMS const in ambient_station
* Fix ihc comment
* Add force update also to non-binary sensors as e.g. POWER Measurement agerage cannot be calculated otherwise. This is the same behavior as set with the obsolete tasmota detection
* add tests in binary_sensor and test_sensor for force_update flag
* satisfy flake8
* next try for force_update test but this time on the entity object which is the correct level
* once again satisfy flake8
* one more try for a test
* fix typo
* satisfy black
* Add init test to Freebox
* Review : more readable conftest
* Expect 2 blank lines between defs
* Review : Not I/O in the event loop
* Fix test_setup test
* remove useless const
* Review : mock setup methods
* Add service test
* Add import test
* Unused pylint suppression cleanups
* Remove outdated pylint bug references
* Add flake8-noqa config and note to run it every now and then
* Add codes to noqa's
* Unused noqa cleanups
* add addon_update service, use config flow to set up config entry, create disabled sensors
* move most of entity logic to common entity class, improve device info, get rid of config_flow user step
* fix setup logic
* additional refactor
* fix refactored logic
* fix config flow tests
* add test for addon_update service and get_addons_info
* add entry setup and unload test and fix update coordinator
* handle if entry setup calls unload
* return nothing for coordinator if entry is being reloaded because coordinator will get recreated anyway
* remove entry when HA instance is no longer hassio and add corresponding test
* handle adding and removing device registry entries
* better config entry reload logic
* fix comment
* bugfix
* fix flake error
* switch pass to return
* use repository attribute for model and fallback to url
* use custom 'system' source since hassio source is misleading
* Update homeassistant/components/hassio/entity.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* update remove addons function name
* Update homeassistant/components/hassio/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* fix import
* pop coordinator after unload
* additional fixes
* always pass in sensor name when creating entity
* prefix one more function with async and fix tests
* use supervisor info for addons since list is already filtered on what's installed
* remove unused service
* update sensor names
* remove added handler function
* use walrus
* add OS device and sensors
* fix
* re-add addon_update service schema
* add more test coverage and exclude entities from tests
* check if instance is using hass OS in order to create OS entities
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
If an entity changes between restart the iOS/controller
device may have cached the old chars for the accessory.
To force the iOS/controller to reload the chars, we
increment the config version when Home Assistant restarts
* Handle stream failures in recorder
Fail gracefully with an error message when the recorder is invoked with no segments due to a stream failure.
* Update homeassistant/components/stream/recorder.py
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>
* Add zeroconf discovery to Freebox
- remove deprecated discovery
- tried with SSDP too but the presentation URL is not the same (*.fbxos.fr for zeroconf, http://mafreebox.freebox.fr/ for SSDP)
- so config entry unique_id should be the MAC (included into SSDP, but not zeroconf, can be retrieve from `fbx.system.get_config()`)
- DHCP discovery might be added in the future too
* host and port are required on zeroconf
* cleanup in other PR
* Support value_template in MQTT triggers
* Rename value_template to payload_template
* Revert "Rename value_template to payload_template"
This reverts commit 902094eefc.
* add number platform to zwave_js integration
* add discovery scheme for thermostat valve control, using number platform
Co-authored-by: kpine <keith.pine@gmail.com>
* migrate zwave_js entities to use new unique ID format
* remove extra param from helper
* add comment to remove migration logic in the future
* update comment
* use instance attribute instead of calling functino on every state update
When we set up HomeKit, we asked users if they wanted
to create an entry in bridge or accessory mode.
This approach required the user to understand how HomeKit works and
choose which type to create.
When the user includes the media player or camera domains,
we exclude them from the bridge and create the additional entries
for each entity in accessory mode.
* add poll_value service
* switch vol.All to vol.Schema
* more relevant log message
* switch service name to refresh_value, add parameter to refresh all watched values, fix tests
* rename parameter and create task for polling command so we don't wait for a response
* raise ValueError for unknown entity
* better error message
* fix test
* create zwave_js.set_config_value service
* update docstring
* PR comments
* make proposed changes
* handle providing a label for the new value
* fix docstring
* use new library function
* config param endpoint is always 0
* corresponding changes from upstream PR
* bug fixes and add tests
* create zwave_js.set_config_value service
* update docstring
* PR comments
* make proposed changes
* handle providing a label for the new value
* fix docstring
* use new library function
* config param endpoint is always 0
* corresponding changes from upstream PR
* bug fixes and add tests
* use lambda to avoid extra function
* add services description file
* bring back the missing selector
* move helper functions to helper file for reuse
* allow target selector for automation editor
* formatting
* fix service schema
* update docstrings
* raise error in service if call to set value is unsuccessful
* Update homeassistant/components/zwave_js/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/zwave_js/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/zwave_js/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/zwave_js/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/zwave_js/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/zwave_js/services.yaml
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* remove extra param to vol.Optional
* switch to set over list for nodes
* switch to set over list for nodes
Co-authored-by: Marcel van der Veldt <m.vanderveldt@outlook.com>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Add discontinuity support to stream recorder
* Use same container options for both StreamOutputs
* Fix pts adjuster
* Remove redundant/incorrect duplicate hls segment check
* Use same StreamBuffer across outputs
* Remove keepalive check for recorder
* Set output video timescale explicitly
* Disable avoid_negative_ts
* Add zwave_js.update_log_config service
* fix comment
* reduce lines
* move update_log_config from service to ws API call
* fix docstring
* Add zwave_js/get_log_config WS API command
* resolve stale comments
* remove transports since it will be removed from upstream PR
* add support to update all log config parameters since they could be useful outside of the UI for advanced users
* fix comment
* switch to lambda instead of single line validator
* fix rebase
* re-add ATTR_DOMAIN
* Add test for invalid usercode
* Add usercodes to totalconnect.
* Update existing tests for usercodes
* Fix tests
* Add test for invalid usercode
* Add usercodes to totalconnect.
* Update existing tests for usercodes
* Fix tests
* Remove YAML support
* Fix conflict
* Bump to total_connect_client 0.56
* Change Exception to HomeAssistantError
* Fix config_flow.py
* Simplify async_setup since no yaml
* Remove import from config flow and tests
* Add reauth and test for it. Various other fixes.
* Fix pylint in __init__
* Show config yaml as deprecated
* separate config_flow and init tests
* Assert ENTRY_STATE_SETUP_ERROR in init test
* Add test for reauth flow
* Fix reauth and tests
* Fix strings
* Restore username and usercode with new passord
* Correct the integration name
* Update tests/components/totalconnect/test_config_flow.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/totalconnect/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update .coveragerc
* Add test for invalid auth during reauth
* Bump total-connect-client to 0.57
* Fix .coveragerc
* More tests for usercodes
* Fix usercode test
* Reload config entry on reauth
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Remove unused "fibaro_fgs222" discovery hint
* Simplify multilevel switch current value discovery schema
* Force iBlinds v2.0 devices to be discovered as cover entities
* Rename discovery test file
* Simplify homekit runs and service calls
Now that the homekit server is async, call_service
and run are running in the Home Assistant event loop
* remove comment
* remove another comment
* add thermostat fan mode and fan state support
* return when fan mode is not supported
* use get just in case
* validate state key is in states so we dont have to use get
* pylint
* Support HLS stream discontinuity.
* Clarify discontinuity comments
* Signal a stream discontinuity on restart due to stream error
* Apply suggestions from code review
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>
* Simplify stream discontinuity logic
SSDP scans no longer runs in the executor
This is an interim step that converts the async_upnp_client
response to netdisco's object to ensure fully backwards
compatibility
* Fix exception in stream idle callback
Fix bug where idle timeout callback fails if the stream previously exited.
* Add a test for stream idle timeout after stream is stopped.
* Add clarifying comment to idle timer clear method
* Clear hls timer only on stop
Separate the HLS stream view logic out of StreamOutput since the hls
stream view is about to get more complex to track discontinuities. This
makes the idle timeout, shutdown, and coupling between hls and record
more explicit.
HomeKit pairings and accessory ids from versions 0.109 and earlier are no longer
migrated on upgrade. Users upgrading directly to 2021.3 from 0.109
and older should upgrade to 2021.2 first if they wish to preserve
HomeKit configuration and avoid re-pairing the bridge.
This change does not affect upgrades from 0.110 and later.
* Remove stream_worker dependencies on Stream
Removee stream_worker dependencies on Stream and split out the logic
for writing segments to a stream buffer.
* Stop calling internal stream methods
* Update homeassistant/components/stream/worker.py
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>
* Reuse self._outputs when creating new streams
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>
* Update test harness to allow discovery_info testing.
This is a needed update, before the whole config is converted
to the new structure, because it allows test of both the old
and new configuration style.
The following changes have been made:
- Combine test functions into a single base_test.
- Prepare for new mock by combining the 2 common test functions into one.
- Change mock to be only modbusHub
- Do not replace whole modbus class, but only the class that
connects to pymodbus (modbusHub). This allows test of modbus
configurations and not only component configurations, and is needed
when testing discovery activated platform.
- Add test of climate.
Warning this is merely test of discovery,
the real cover tests still needs to be added.
- Add test of cover.
Warning this is merely test of discovery,
the real cover tests still needs to be added.
* Update comment for old config
* Do not use hass.data, but instead patch pymodbus library.
* Add test of configuration (old/new way as available).
* Move assert to test function.
Make assert more understandable by removing it from the helper.
add base_config_test (check just calls base_test) to make it clear if
test is wanted or just controlling the config.
* use setup_component to load Modbus since it is an integration.
* Optimized flow in test helper.
* Correct missed review changes
* Adjust return value for device trigger
* Drop cannot connect
* Always assume there is a unique id
* No need to yield
* Update homeassistant/components/philips_js/media_player.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Move typing to init
* Adjust typing instead of returning lambda
* Explicity return None
* Coerce into int
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add config flow to philips_js
* Adjust name of entry to contain serial
* Use device id in event rather than entity id
* Adjust turn on text
* Deprecate all fields
* Be somewhat more explicit in typing
* Switch to direct coordinator access
* Refactor the pluggable action
* Adjust tests a bit
* Minor adjustment
* More adjustments
* Add missing await in update coordinator
* Be more lenient to lack of system info
* Use constant for trigger type and simplify
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add target to service call API
* Fix _async_call_service_step
* CONF_SERVICE_ENTITY_ID overrules target
* Move merging up before processing schema
* Restore services.yaml
* Add test
* Change the API boundary between stream and camera
Shift more of the stream lifecycle management to the camera. The motivation is to support stream urls that expire
giving the camera the ability to change the stream once it is created.
* Document stream lifecycle and simplify stream/camera interaction
* Reorder create_stream function to reduce diffs
* Increase test coverage for camera_sdm.py
* Fix ffmpeg typo.
* Add a stream identifier for each stream, managed by camera
* Remove stream record service
* Update homeassistant/components/stream/__init__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Unroll changes to Stream interface back into camera component
* Fix preload stream to actually start the background worker
* Reduce unncessary diffs for readability
* Remove redundant camera stream start code
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Unlikely sqlite and mysql, postgresql throws ProgrammingError instead
of InternalError or OperationalError when trying to create an index
that already exists.
* Remove dependencies on keepalive from StremaOutput and stream_worker
Pull logic from StreamOutput and stream_worker into the Stream
class, unifying keepalive and idle timeout logic. This prepares
for future changes to preserve hls state across stream url changes.
* Enhance MQTT cover platform
Allow combining of position and state of MQTT cover
Add template and fix optimistic in set tilt position
Add tests
* Add abbreviations
* Add tests and stopped state
* Cleanup & fix range for templates
* Apply suggestions from code review
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Erik Montnemery
Paulus Schoutsen
J. Nick Koston
Raman Gupta
Diogo Gomes
uvjustin
ollo69
Adam Ernst
Robert Svensson
Alexei Chetroi
Franck Nijhof
Nathan Spencer
Emily Mills
tkdrob
Martin Hjelmare
Eric Severance
Chris
Quentame
Rene Lehfeld
Ville Skyttä
Marcel van der Veldt
Dermot Duffy
Matt Zimmerman
Tobias Sauerwein
Allen Porter
starkillerOG
Maciej Bieniek
Joakim Plate
Charles Garwood
Bram Kragten
Joakim Sørensen
João Gabriel
Nathan Tilley
jjlawren
adrian-vlad
Álvaro Fernández Rojas
MeIchthys
MHV33
Jon Caruana
kpine
Austin Mroczek
Jan-Willem Mulder
Garrett
Steven Looman
Tom Harris
Milan Meulemans
Chris Talkington
Anders Melchiorsen
Ilja Leiko
Mark Coombes
Shay Levy
jan iversen
Andrey Kupreychik
Czapla
Steve Dwyer
Mike Keesey
Leonardo Figueiro
ehendrix23
Alan Tse
Pascal Reeb
Greg Dowling
Joeri