Remove old style configuration from switch.
- The old style configuration allowed a number of illegal
configurations, instead of adding if...log. in setup we
only support the new configuration style.
Add new/changed configuration switch.
Removed verify_state and cleaned configuration to avoid possible
illegal configurations.
* Reuse HA constants for serial configuration.
Reusing HA consts reduces the need for translation.
Sort/group constants in const.
* Change const name ATTR_* to CONF_*
* Correct wrong import
* ATTR_* for service and CONF_* for schemas.
* Revert change to service call.
* Rename CONF_TEMPERATURE -> ATTR_TEMPERATURE
Avoid possible division problem in set_temperature.
* Change modbus configuration to new style.
The old (frozen) configuration is still supported, but when detected a big
warning is issued that it will soon be removed. This allows users to change
their configuration at their pace.
Clean configuration SCHEMAs and move common modbus parts
to MODBUS_SCHEMA (renamed from BASE_SCHEMA).
Add BASE_COMPONENT_SCHEMA to ensure common configuration of components.
All component define e.g. NAME, move these to a common schema.
change components (binary_sensor, sensor, switch) to new config
Add test set for modbus itself (old config and discovery_info).
Add test of devices discovery_info configuration
* Update discovery_info configuration for binary_sensor.
* Update discovery_info configuration for sensor.
* Update discovery_info configuration for switch.
* Review comments.
* update due to change in core
* flake8 problem.
* Correct log message.
* add should_poll property.
* Fix polling for Modbus binary sensor
* Fix polling for Modbus sensor
* Fix polling for Modbus switch
* Fix switch.
* Fix pytest errors.
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/modbus.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ToogleEntity -> SwitchEntity and add abastract
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/modbus/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* removed if/else in test.
* Remove other if.
Co-authored-by: Vladimir Zahradnik <vladimir@zahradnik.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add Modbus cover
* Fix improper commands written for Modbus cover via coil
* Make changes per review comments
* Fix default hub not defined
Since support for multiple hubs was added, the default hub option
was not implemented correctly. Now I added necessary logic to make
it work. First hub in a list will be used as a default hub.
* Move Cover config under Modbus section
* Revert setting up a default hub alias
* Make hub mandatory for Cover
* Add default scan interval
* Read scan_interval from discovery info
* Fix linter error
* Use default scan interval from Cover platform
* Handle polling for Modbus cover directly inside entity
* Move covers under hub config
* Fix for review comment
* Call update() from Cover actuator methods
* Fix time validation
* modbus sensor: string data_type
Adds support for a string data_type. This allows the reading of holding registers that contain ascii string data
* Add modbus sensor string data_type #35269
Fingers crossed that I am putting these file in the correct location this time
* Delete const.py
* Delete sensor.py
* Add files via upload
* modbus sensor - add string support. Upload from local dev environment
* fix executable stauts
* fix flake8 failure
* modbus: bumb pymodbus version to 2.3.0
pymodbus version 1.5.2 did not support asyncio, and in general
the async handling have been improved a lot in version 2.3.0.
updated core/requirement*txt
* updated core/CODEOWNERS
committing result of 'python3 -m script.hassfest'.
* modbus: change core connection to async
change setup() --> async_setup and update() --> async_update()
Use async_setup_platform() to complete the async connection to core.
listen for EVENT_HOMEASSISTANT_START happens in async_setup()
so it needs to be async_listen.
But listen for EVENT_HOMEASSISTANT_STOP happens in start_modbus()
which is a sync. function so it continues to be listen().
* modbus: move setup of pymodbus into modbushub
setup of pymodbus is logically connected to the class modbushub,
therefore move it into the class.
Delay construction of pymodbus client until event
EVENT_HOMEASSISTANT_START arrives.
* modbus: use pymodbus async library
convert pymodbus calls to refer to the async library.
Remark: connect() is no longer needed, it is done when constructing
the client. There are also automatic reconnect.
* modbus: use async update for read/write
Use async functions for read/write from pymodbus.
change thread.Lock() to asyncio.Lock()
* Modbus: patch for slow tcp equipment
When connecting, via Modbus-TCP, so some equipment (like the
huawei sun2000 inverter), they need time to prepare the protocol.
Solution is to add a asyncio.sleep(x) after the connect() and before
sending the first message.
Add optional parameter "delay" to Modbus configuration.
Default is 0, which means do not execute asyncio.sleep().
* Modbus: silence pylint false positive
pylint does not accept that a class construction __new__
can return a tuple.
* Modbus: move constants to const.py
Create const.py with constants only used in
the modbus integration.
Duplicate entries are removed, but NOT any entry that would
lead to a configuration change.
Some entries were the same but with different names, in this
case renaming is done.
Also correct the tests.
* Modbus: move connection error handling to ModbusHub
Connection error handling depends on the hub, not the
entity, therefore it is logical to have the handling in
ModbusHub.
All pymodbus call are added to 2 generic functions (read/write)
in order not to duplicate the error handling code.
Added property "available" to signal if the hub is connected.
* Modbus: CI cleanup
Solve CI problems.
* Modbus: remove close of client
close() no longer exist in the pymodbus library, use
del client instead.
* Modbus: correct review comments
Adjust code based on review comments.
* Modbus: remove twister dependency
Pymodbus in asyncio mode do not use twister but still throws a
warning if twister is not installed, this warning goes into
homeassistant.log and can thus cause confusion among users.
However installing twister just to avoid the warning is not
the best solution, therefore removing dependency on twister.
* Modbus: review, remove comments.
remove commented out code.
jan iversen
jan iversen
tkdrob
Vladimír Záhradník
Brad Keifer