* Add MySensors ACK
The addition of the ACK will ask sensors to respond to commands sent to them which will update the MySensors device in Home Assistant.
Currently, if a default MySensors sketch is used the device will update but Home Assistant does not reflect the update and custom code has to be added to tell Home Assistant the command was received. With the ACK set to 1 in the message all this is taken care of by MySensors.
* Run black
* Add basic config flow
* Fix json files
* Update __init__.py
* Fix json errors
* Move constants to const.py
* Add ecobee to generated config flows
* Update config_flow for updated API
* Update manifest to include new dependencies
Bump pyecobee, add aiofiles.
* Update constants for ecobee
* Modify ecobee setup to use config flow
* Bump dependency
* Update binary_sensor to use config_entry
* Update sensor to use config_entry
* Update __init__.py
* Update weather to use config_entry
* Update notify.py
* Update ecobee constants
* Update climate to use config_entry
* Avoid a breaking change on ecobee services
* Store api key from old config entry
* Allow unloading of config entry
* Show user a form before import
* Refine import flow
* Update strings.json to remove import step
Not needed.
* Move third party imports to top of module
* Remove periods from end of log messages
* Make configuration.yaml config optional
* Remove unused strings
* Reorganize config flow
* Remove unneeded requirement
* No need to store API key
* Update async_unload_entry
* Clean up if/else statements
* Update requirements_all.txt
* Fix config schema
* Update __init__.py
* Remove check for DATA_ECOBEE_CONFIG
* Remove redundant check
* Add check for DATA_ECOBEE_CONFIG
* Change setup_platform to async
* Fix state unknown and imports
* Change init step to user
* Have import step raise specific exceptions
* Rearrange try/except block in import flow
* Convert update() and refresh() to coroutines
...and update platforms to use async_update coroutine.
* Finish converting init to async
* Preliminary tests
* Test full implementation
* Update test_config_flow.py
* Update test_config_flow.py
* Add self to codeowners
* Update test_config_flow.py
* Use MockConfigEntry
* Update test_config_flow.py
* Update CODEOWNERS
* pylint fixes
* Register services under ecobee domain
Breaking change!
* Pylint fixes
* Pylint fixes
* Pylint fixes
* Move service strings to ecobee domain
* Fix log message capitalization
* Fix import formatting
* Update .coveragerc
* Add __init__ to coveragerc
* Add option flow test
* Update .coveragerc
* Act on updated options
* Revert "Act on updated options"
This reverts commit 56b0a859f2e3e80b6f4c77a8f784a2b29ee2cce9.
* Remove hold_temp from climate
* Remove hold_temp and options from init
* Remove options handler from config flow
* Remove options strings
* Remove options flow test
* Remove hold_temp constants
* Fix climate tests
* Pass api key to user step in import flow
* Update test_config_flow.py
Ensure that the import step calls the user step with the user's api key as user input if importing from ecobee.conf/validating imported keys fails.
* add alarm_control_panel to google_assistant
* add cancel arming option
* raise error if requested state is same as current
* rework executing command logic
* Add tests
* fixed tests
* fixed level synonyms
* Added availability_template to Template Switch platform
* Fixed Entity discovery big and coverage
* flake8
* Cleaned template setup
* I'll remember to run black every time one of these days...
* Updated AVAILABILITY_TEMPLATE Rendering error
* Moved const to package Const.py
* Fix import order (pylint)
* Refactored availability_tempalte rendering to common loop
* Cleaned up const and compare lowercase result to 'true'
* reverted _available back to boolean
* Fixed tests (async, magic values and state checks)
* Fixed Enity Extraction
* Added availability_template to Template Sensor platform
* Added to test for invalid values in availability_template
* Updated AVAILABILITY_TEMPLATE Rendering error
* Moved const to package Const.py
* Fix import order (pylint)
* Moved availability_template rendering to common loop
* Removed 'Magic' string
* Cleaned up const and compare lowercase result to 'true'
* Device is unavailbale if value template render fails
* Converted test ot Async and fixed states
* Comverted back to using boolean for _availability
* Fixed state check in test
* Use light's on_level in ZHA to turn on at the correct brightness
Previously, if the light is turned off with a time transition, the
brightness level stored in the light will be 1. The next time the light
is turned on with no explicit brightness, it will be at 1.
This is solved by storing the current brightness in on_level before
turning off, and then using that when turning on (by calling the
onOff cluster 'on' command).
* store off light level locally to avoid wearing device's flash memory
* store off brightness in HA attributes
* improve set/clear of off_brightness
* fix device_state_attributes; clear off_brightness when light goes on
* fix tests
* Add here_travel_time
* Bump herepy version to 0.6.2
* Update requirements_all.txt
* Disable pylint and catch errors
* Add herepy to requirements_test_all
* Correctly place test req for herepy
* use homeassistant.const.LENGTH_METERS
* Implemented Requested Changes
* Better error message for cryptic error code
* add requested changes
* add_entities instead of async
* Add route attr and distance in km instead of m
* fix linting errors
* attribute duration in minutes instead of seconds
* Correct pattern for longitude
* dont split attribute but rather local var
* move strings to const and use travelTime
* Add tests
* Add route for pedestrian and public
* fix public transport route generation
* remove print statement
* Standalone pytest
* Use hass fixture and increase test cov
_resolve_zone is redundant
* Clean up redundant code
* Add type annotations
* Readd _resolve_zone and add a test for it
* Full test cov
* use caplog
* Add origin/destination attributes
According to https://github.com/home-assistant/home-assistant/pull/24956
* Add mode: bicycle
* black
* Add mode: publicTransportTimeTable
* Fix error for publicTransportTimeTable
Switch route_mode and travel_mode in api request.
* split up config options
* More type hints
* implement *_entity_id
* align attributes with google_travel_time
* route in lib
apply requested changes
* Update requirements_all.txt
* remove DATA_KEY
* Use ATTR_MODE
* add attribution
* Only add attribution if not none
* Add debug log for raw response
* Add _build_hass_attribution
* clearer var names in credentials check
* async _are_valid_client_credentials
* Add Ombi integration
* Black
* Remove trailing comma
* Change dict.get to dict[key] for known keys
* Remove monitored conditions from config
* Define SCAN_INTERVAL for default scan interval
* Adjust requests syntax and add music_requests
* Remove Ombi object initialization
* Move constants to const.py
* Fix imports
* Set pyombi requirement to version 0.1.3
* Add services.yaml
* Add config schema and setup for integration
* Set pyombi requirement to version 0.1.3
* Fix syntax for scan interval
* Fix datetime import
* Add all files from ombi component
* Move imports around
* Move imports around
* Move pyombi import to top of module
* Move scan_interval to sensor module
* Add custom validator for urlbase
* Add guard clause for discovery_info
* Add service validation schemas and constants
* Bump pyombi version
* Adjust urlbase validation
* Add exception warnings for irretrievable media
* Bump pyombi
* Change from .get to dict[key]
* Change schema and conf variable names
* Set return to return false
* Remove unneeded return
* Add basic support for IKEA Fyrtur blinds
* Update coveragerc
* Fix typo
* Fix typos
* Update following review
* Fix incorrect rebase
* Fix error
* Update to new format of unique id
* Add cover
* Remove reference to cover in unique id
* Update Vivotek camera component
Load model name to instance attribute
* Update Vivotek camera component
Ensure `update` is called when the entity is added.
* Update libpyvivotek to 0.2.2
https://pypi.org/project/libpyvivotek/0.2.2/
- Retrieve camera model name anonymously
- Raise a more helpful error for invalid creds
petewill
Bram Kragten
Mark Coombes
Robert Svensson
Daniel Shokouhi
Rami Mosleh
Jeff Irion
zhumuht
Andrey Kupreychik
Gil Peeters
Franck Nijhof
tleegaard
Sébastien RAMAGE
David F. Mulcahey
HomeAssistant Azure
Paulus Schoutsen
majuss
Robin
Tim McCormick
Paul Bottein
SukramJ
Balazs Sandor
Alexei Chetroi
Abílio Costa
MajestyIV
Kevin Eifinger
Tommy Larsson
jjlawren
Michał Mrozek
Patrik
Kevin McCormack