* Only replace a node if the mfgr id / prod id / prod type differ
* Prefer original device name for unready node
* move register_node_in_dev_reg into async_setup_entry
* simplify get_device_id_ext
* Don't need hex ids
* Revert "move register_node_in_dev_reg into async_setup_entry"
This reverts commit f900e5fb0c67cc81657a1452b51c313bccb6f9e1.
* Revert Callable change
* Revert device backup name
* Add test fixtures
* Update existing not ready test with new fixture data
* Check device properties after node added event
* Add entity check
* Check for extended device id
* better device info checks
* Use receive_event to properly setup components
* Cleanup tests
* improve test_replace_different_node
* improve test_replace_same_node
* add test test_node_model_change
* Clean up long comments and strings
* Format
* Reload integration to detect node device config changes
* update assertions
* Disable entities on "value removed" event
* Disable node status sensor on node replacement
* Add test for disabling entities on remove value event
* Add test for disabling node status sensor on node replacement
* disable entity -> remove entity
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Use configured speed ranges for HomeSeer FC200+ fan controllers in zwave_js
* Fix pylint errors
* Remove unused param in tests
* Fix test values
* Address various review notes
* Remove now-redundant assertion
* Add an additional test case for set_percentage=0
* Use round() instead of int() for percentage computations; this makes the percentage setting match the setpoints in the UI
* Add additional tests
* Fix pct conversions
* Make conversion tests exhaustive
* Add tests for discovery data templates
* Revert "Add tests for discovery data templates"
This reverts commit 85dcbc0903.
* Improve typing on ConfigurableFanSpeedDataTemplate#resolve_data
* Move config error handling to the discovery data template
* Fix checks for config data
* Revise fallback logic in percentage_to_zwave_speed and ensure that the speed list is non-empty
* Rework error handling
* Fix runtime fan speed updates
* Use warning instead of warn
* Move data validation to get_speed_config; turns out that resolve_data is only called once, at startup.
* Temporarily remove the not-yet-used fixed fan speed template. Add an additional assertion to ensure speeds are sorted.
* Add a comment about the assertions in discovery_data_template.py
* Update homeassistant/components/zwave_js/discovery_data_template.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fix typo in comment
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add support for multilevel switch CC select entities
* Use state names from docs and include more device identifiers from device DB
* black
* pylint
* type fix
* Add failure scenario test
* Update homeassistant/components/zwave_js/select.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add energy support for zwave_js meter CC entities
* shrink
* comments
* comments
* comments
* Move attributes
* Add tests
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add On/Off as target values for stop cover
Certain ZWave Cover devices use On/Off instead of the more common
Open/Close and Up/Down targets for movement.
Adding On/Off to the targets used to stop the cover during movement.
Fixes issue #51963
* Add test for updated zwave_js stop cover logic
* Initial support for zwave_js device triggers
* lint
* Add node status changed trigger
* comments
* create helper function and simplify trigger logic
* simplify code
* fix exception
* remove unused type ignore
* switch to append to make future changes easier
* make exception consistent
* Add state config schema validation
* comment
* remove 0 from falsy check
* increase test coverage
* typos
* Add central scene and scene activation value notification triggers
* reorder things for readability and enumerate node statuses
* Add support for Basic CC value notifications
* fix schemas since additional fields on triggers aren't very flexible
* pylint
* remove extra logger statement
* fix comment
* dont use get when we know key will be available in dict
* tweak text
* use better schema for required extra fields that are ints
* rename trigger types to make them easier to parse
* fix strings
* missed renaming of one trigger type
* typo
* Fix strings
* reduce complexity
* Use Al's suggestion for strings
* add additional failure test cases
* remove errant logging statement
* make CC required
* raise vol.Invalid when value ID isn't legit to prepare for next PR
* Use helper function
* fix tests
* black
* Add support for Z-Wave JS siren
* Add additional device class to discovery
* fix docstring
* Remove device class specific part of discovery schema
* rename test
* switch to entry.async_on_remove
* Fix logic based on #52971
* Use constants to unblock PR
* Add support to set volume level
* Update homeassistant/components/zwave_js/siren.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add WS API support for zwave_js firmware updates
* move file to fixture
* review comments
* fix logic and test based on upstream changes
* handle failure scenario
* handle failure scenario
* fix tests and adjust message
* Update homeassistant/components/zwave_js/api.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* remove return from firmware upload view because client will raise an exception if not successful
* raise if user is not an admin
* raise bad request exception if firmware command fails
* incorporate #50923
* Add test for failed command
* add event name to messages
* change error to not found
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Set device_class for shutters and blinds
* Add missing. imports
* Add tests for device class setting
* Clean up
* Avoid storing the node in an unused variable
* Fix entity name
* Extend qubino shutter discovery
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add zwave_js support for HeatIt Z-TRM2fx
* fix docstring
* use AwesomeVersion to support firmware version ranges
* add guard against empty firmware range
* switch guard approach to raise exception sooner
* make post init more generic
* Set up firmware range schema as AwesomeVersion during initialization
* Update homeassistant/components/zwave_js/discovery.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Allow min_ver and max_ver to be None
* fix docstring
* reduce import scope
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add zwave_js discovery schema for Vision Security ZL7432
* add tests
* fix test
* add correct fixture
* Make discussed changes
* fix tests
* move event handler
* fix logic to get entity ID
* add test
* make discovery test more explicit
* remove domain from event data
* always provide entity_id key to make automations easier and translate value if possible
* formatting
* comment
* dont overwrite value
* add number platform to zwave_js integration
* add discovery scheme for thermostat valve control, using number platform
Co-authored-by: kpine <keith.pine@gmail.com>
* Remove unused "fibaro_fgs222" discovery hint
* Simplify multilevel switch current value discovery schema
* Force iBlinds v2.0 devices to be discovered as cover entities
* Rename discovery test file
* Remove v4 multilevel transitional currentValue workaround
This was only needed because the get-after-set was reporting a
transitional currentValue instead of the final one.
zwave-js v6.1.1 removes the get-after-set functionality completely, so
this is no longer required (and breaks status reporting entirely)
* Fix tests to check currentValue instead of targetValue as well
* Use new zwave_js client
* Remove client callbacks
* Clean up on connect and on disconnect
* Clean log
* Add stop listen to unsubscribe callbacks
* Fix most tests
* Adapt to new listen interface
* Fix most tests
* Remove stale connection state feature
* Bump zwave-js-server-python to 0.16.0
* Clean up disconnect
* Remove zwave_js devices that the controller is no longer connected to on initialization
* remove extra line break
* fix test
* Clean up
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Lint
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
kpine
Raman Gupta
Michael Kowalchuk
Paul Frank
Erik Montnemery
Joakim Sørensen
p4p3r
Martin Hjelmare
Dror Eiger
Chris
Marcel van der Veldt
Tobias Sauerwein
Jesse Campbell
Paulus Schoutsen