* ADS light breaks if optional parameter adsvar_brightness is not set
Just a small change to prevent exception if optional parameter adsvar_brightness is not set
* corrected blank lines
* Initial commit of LCN component and light platform
* Corrected pre-review comments
* Fixed dimming behaviour in combination with transitions for lcn lights
* Removed unused logger
* Combined __init__.py and core.py into lcn.py component. Bumped to pypck==0.5.6
* Fixed .coveragerc
* Bumped to pypck==0.5.7
* Bump to pypck==0.5.8
* Fixed requirements_all.txt
* Moved unique generation of connection names to config schema's validator
* Minor changes due to review comments.
Bump to pypck==0.5.9.
* Address_connection is passed into LcnDevice
* Set should_poll property on LcnDevice to return False
* Moved platform config validation to component. Load platform using discovery helper
* Furtehr changes due to the review
* Light configuration is set required as there are no other platforms up to now
* Added Lutron Homeworks components.
* Made all requested changes other than config.
* Removed commented out code.
* Removed binary_sensor.
Implemented new signal/events for button presses.
Cleaned up some data passing.
* Fixed minor formatting.
* Got rid of unused config stuff.
Reordered imports.
* Missed removing vol, and forgot an extra line.
* More requested changes
Removed HomeworksController, it wasn't needed.
* Removed stale code.
* Imperative doc change.
* Implement async_configure() method for ZHA entities.
Allow attribute reporting configuration to be stored as dict of zha
entity.
* Update ZHA platform to use new attribute reporting configuration.
* Use const declaration instead of magic numbers.
* Add support for manufacturer_id in ZCL attribute reporting configuration.
* Refactor async_configure() method.
Rename attribute reporting dict to zcl_reporting_config.
* WeMo - Various fixes and improvements
Various fixes & improvements to the WeMo components, including:
-- Fixes to rediscovery
-- New reset filter service for the WeMo Humidifier
-- Switched the remainder of the WeMo components to async IO
-- Removed any remaining IO in entity properties and moved them to the polling/subscription update process
* WeMo - Fix pywemo version and remove test code from WeMo fan component
* WeMo Humidifier - Add services.yaml entry for reset filter life service
* WeMo - Update binary_sensor component to use asyncio
* WeMo - Add available property to binary_sensor component
* WeMo - Fixed line length issue
* WeMo - Fix issue with discovering the same device multiple times
* WeMo - Fix for the fix for discovering devices multiple times
* WeMo - Fix long lines
* WeMo - Fixes from code review
* WeMo - Breaking Change - entity_ids is now required on wemo_set_humidity
* WeMo - Code review fixes
* WeMo - Code review fixes
* WeMo - Code review fixes
* Adding basic Plum Lightpad support - https://plumlife.com/
* Used Const values
is_on is a bool
* Added LightpadPowerMeter Sensor to the plum_lightpad platform
* Moved to async setup, Introduced a PlumManager, events, subscription, Light and Power meter working
* Added PlumMotionSensor
* Added Glow Ring support
* Updated plum library and re-normalized
* set the glow-ring's icon
* Naming the glow ring
* Formatting and linting
* Cleaned up a number of linting issues. Left a number of documentation warnings
* setup_platform migrated to async_setup_platform Plum discovery run as a job
* bumped plumlightpad version
* On shutdown disconnect the telnet session from each plum lightpad
* Cleanup & formatting. Worked on parallell cloud update
* Moved setup from async to non-async
* Utilize async_call_later from the helpers
* Cleanedup and linted, down to documentation & one #TODO
* Remove commented out debug lines
* Fixed Linting issues
* Remove TODO
* Updated comments & fixed Linting issues
* Added plumlightpad to requirements_all.txt
* Fixing imports with isort
* Added components to .coveragerc
* Added PLUM_DATA constant for accessing hass.data[PLUM_DATA]
* used dictionary syntax vs get(...) for config
* Linting needed an additonal line
* Fully async_setup now. removed @callback utilize bus events for detecting new devices found.
* Upgraded to plumlightpad 0.0.10
* Removed extra unused PLATFORM_SCHEMA declarations
* Moved listener attachment to `async_added_to_hass` and removed unused properties & device_state_attributes
* Utilized Discovery when devices were located
* Linting and cleanup
* used `hass.async_create_task` instead of `hass.async_add_job` per Martin
* Removed redundant criteria in if block
* Without discovery info, there is no need to setup
* Better state management and async on/off for Glow Ring
* renamed async_set_config back to set_config, fixed cleanup callback and Plum Initialization
* Fixed flake8 linting issues
* plumlightpad package update
* Add 'motion' device_class to Motion Sensor
* Fixed last known Linting issue
* let homeassistant handle setting the brightness state
* String formatting vs concatenation
* use shared aiohttp session from homeassistant
* Updating to use new formatting style
* looks like @cleanup isn't neccesary
* ditch the serial awaits
* Ensure async_add_entities is only called once per async_setup_platform
* Creating tasks to wait for vs coroutines
* Remove unused white component in the GlowRing
* Used local variables for GlowRing colors & added a setter for the hs_color property to keep the values in sync
* Linted and added docstring
* Update the documentation path to point to the component page
* Removed the extra sensor and binary_sensor platforms as requested. (To be added in later PRs)
* Update plum_lightpad.py
* Update plum_lightpad.py
* Add Philips Moonlight Bedside Lamp support
* Update comment
* Make hound happy
* Wrap the call that could raise the exception only
* Remote blank line
* Use updated python-miio API
* move component to a package
* move TelldusLiveEntry to separate file
* refactor
* move entities from a shared container
* using the dispatch helper instead for communication between component and platforms
* updated covereagerc and codeowners
* suggestions from MartinHjelmare
* don't make update async
* "Strip is good!"
* Added lightwave components for switches and lights.
* Address warnings raised by Hound
* Correcting lint messages and major typo. This time tested before commit.
* Trying to fix author
* Minor lint changes
* Attempt to correct other lint error.
* Another lint attempt.
* More lint issues.
* Last two lint errors! Hurrah.
* Changes after review from fabaff.
* Moved device dependent code to PyPi.
* Replaced DEPENDENCIES with REQUIREMENTS
* Updated following code review from Martin Hjelmare.
* Added lightwave to requirements_all.txt
* Omit lightwave from tests.
* Updated requirements_all.txt
* Refactored how lightwave lights and switches load.
* Removed imports that were no longer required.
* Add guard for no discovery_info.
* Make it a guard clause and save indentation. Rename LRFxxx to LWRFxxx.
* Sorted imports to match style guidelines.
* Correct return value.
* Update requirements_all.txt
* Catch case where we have no lights or switches configured.
* Improve configuration validation.
* Restore states through a JSON store
* Accept entity_id directly in restore state helper
* Keep states stored between runs for a limited time
* Remove warning
* Use asyncio Lock for fibaro light
* line length and empty line at end
* async turn_off
Turned the turn_off into async as well
* bless you, blank lines...
My local flake8 lies to me. Not cool.
Remove the return value from setup_platform
Convert LutronLight.__init__ to use super() when referencing the parent class.
Change device_state_attributes() to use lowercase snakecase (Rename 'Lutron Integration ID' to 'lutron_integration_id')
* Added Fibaro omcponents
Added cover, light, sensor and switch components
* Improvements based on code review
Improvements based on code review
* Fixes based on code review
Fixes based on code review
* Changes to light behavior based on code review
Changes to light behavior based on code review
* Internal changes
Changed how brightness is represented internally.
It should have no impact on functionality.
* Update Avi-On to work with the API.
* Use voluptuous defaults instead of .get()
* Bump library version.
* Remove unnecessary voluptuous defaults. Fix manually-configured devices.
API-discovered devices are already Avion objects, but manually-configured devices need to be instantiated as Avion objects first.
* Use .get() where appropriate.
* Remove default
* Enable brightness slider for RGB
If we are using RGB with no brightness topic, the brighness slider
should still be visible, as we can scale the RGB amount to give us the
brightness.
* Output RGB scaled by brightness
If we are outputting to an RGB device, but do not have a dedicated
brightness topic set, when the brightness slider is changed, we should
output the current colour's HS, with the V coming from the brightness
slider.
* Brightness from RGB when we're not using a brightness topic
When we aren't using a brightness topic, set the brightness slider based
on the received value from an RGB -> HSV conversion.
* Test for new brightness state scaled by RGB
This adds a test to make sure the brightness stored in the state is
being computed correctly from the RGB value when a dedicated brightness
topic is not set.
* Changes from review
Fixes formatting of supported features flags, and checks HS colour
hasn't been set when operating in RGB-only mode
* Set optimistic brightness correctly in rgb mode
When we're using rgb mode to set the brightness, we want to set
optimistic brightness if:
we are running in optimistic mode
OR
the brightness state topic isn't set and we have a brightness command topic
OR
the rgb state topic isn't set and we don't have a brightness command topic
* Add test for turn_on in RGB brightness mode
* Add device_registry support for sensor and switch domains
* Add device_registry support for light
* Add device registry to binary_sensor, climate, cover
* Add device registry to zwave fan
* Fix test for config entry loading
* lint
* revert erroneous modification
* Revert device_registry.py change
* Provide an individual color temperature range per Yeelight model
* Fix lint
* Bump yeelight version
* Remove unused const
* Enable SUPPORT_COLOR_TEMP for BulbType.WhiteTemp
* Changing z-wave brightness calculation to respect 0x01 and 0x02 byte
values
* adding additional line breaks to satisfy houndci
* - Update comment style for linter
- Add additional unit test to increase code coverage
* Update zwave.py
* Allow only_cache parameter in zha.safe_read()
* Use cache_only for binary_sensor.zha initial update.
* Use cache_only for fan.zha initial update.
* Use cache_only for sensor.zha initial update.
* Use cache_only for switch.zha initial update.
* Use cache_only for light.zha initial update.
* Refactor cached only read in zha platform.
* Allow device registry to optionally store config entries
* Connections and identifiers are now sets with tupels
* Make config entries mandatory
* Fix duplicate keys in test
* Rename device to device_info
* Entity platform should only create device entries if config_entry_id exists
* Fix Soundtouch tests
* Revert soundtouch to use self.device
* Fix baloobs comments
* Correct type in test
* First draft
* Generate device id
* No obscure registry
* Dont store config_entry_id in device
* Storage
* Small mistake on rebase
* Do storage more like entity registry
* Improve device identification
* Add tests
* Remove deconz device support from PR
* Fix hound comments, voff!
* Fix comments and clean up
* Fix proper indentation
* Fix pydoc issues
* Fix mochad component to not use self.device
* Fix mochad light platform to not use self.device
* Fix TankUtilitySensor to not use self.device
* Fix Soundtouch to not use self.device
* Fix Plex to not use self.device
* Fix Emby to not use self.device
* Fix Heatmiser to not use self.device
* Fix Wemo lights to not use self.device
* Fix Lifx to not use self.device
* Fix Radiotherm to not use self.device
* Fix Juicenet to not use self.device
* Fix Qwikswitch to not use self.device
* Fix Xiaomi miio to not use self.device
* Fix Nest to not use self.device
* Fix Tellduslive to not use self.device
* Fix Knx to not use self.device
* Clean up a small mistake in soundtouch
* Fix comment from Ballob
* Fix bad indentation
* Fix indentatin
* Lint
* Remove unused variable
* Lint
* Implement X10
* Add X10 after add_device_callback
* Ref device by id not hex and add x10OnOffSwitch name
* X10 services and add sensor device
* Correctly reference X10_HOUSECODE_SCHEMA
* Log adding of X10 devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct ref to X10 states vs devices
* Add X10 All Units Off, All Lights On and All Lights Off devices
* Correct X10 config
* Debug x10 device additions
* Config x10 from bool to housecode char
* Pass PLM to X10 device create
* Remove PLM to call to add_x10_device
* Unconfuse x10 config and method names
* Correct spelling of x10_all_lights_off_housecode
* Bump insteonplm to 0.10.0 to support X10
* Add host to config options
* Add username and password to config for hub connectivity
* Add username and password to config for hub
* Convert port to int if host is defined
* Add KeypadLinc
* Update config schema to require either port or host
* Solidify Hub and PLM configuration to ensure proper settings
* Update hub schema
* Bump insteonplm version
* Fix pylint and flake issues
* Bump insteonplm to 0.12.1
* Merge insteon_plm and insteon_local to insteon
* Rename insteon_plm to insteon
* Bump insteonplm to 0.12.2
* Flake8 cleanup
* Update .coveragerc for insteon_plm, insteon_local and insteon changes
* Add persistent notification
* Fix reference to insteon_plm
* Fix indentation
* Shorten message and fix grammer
* Add comment to remove in release 0.90
* Hound fix
* remove velbus fan and light platforms
these platforms should not be there since they can be created with template components based on switch platform
* use latest version of python-velbus which supports auto-discovery of modules
* fix linting errors
* fix linting errors
* fix linting errors
* address review comments from @MartinHjelmare
* update based on automatic feedback
* fix linting errors
* update dependency
* syntax corrections
* fix lint warning
* split out common functionality in VelbusEntity
use sync methods for loading platforms
support unique_ids so that entities are registred in entity registry
* fix linting errors
* fix linting errors
* fix linting errors
* integrate review comments (common functionality in VelbusEntity class)
* rename DOMAIN import to VELBUS_DOMAIN
* revert change created by requirements script
* regen
* Initial commit for deCONZ switch support
* Fix hound comment
* Fix martins comment; platforms shouldn't depend on another platform
* Fix existing tests
* New tests
* Clean up unnecessary methods
* Bump requirement to v43
* Added device state attributes to light
* Remember last brightness value and use it on turn_on()
* Pyfnip-0.2 now returns state reliably, no manual changes needed.
* Split too long line of code
* Updated pyfnip library version
* Add a component for Sisyphus Kinetic Art Tables
The [Sisyphus Kinetic Art Table](https://sisyphus-industries.com/) uses a
steel ball to draw intricate patterns in sand, thrown into sharp relief by a
ring of LED lights around the outside.
This component enables basic control of these tables through Home Assistant.
* Fix lints
* Docstrings, other lints
* More lints
* Yet more.
* Feedback
* Lint
* Missed one piece of feedback
* - Use async_added_to_hass in media player
- async_schedule_update_ha_state in listeners
- constants for supported features
- subscripting for required keys
- asyncio.wait
- update to sisyphus-control with passed-in session
* Update requirements
* lint
* Add context
* Add context to switch/light services
* Test set_state API
* Lint
* Fix tests
* Do not include context yet in comparison
* Do not pass in loop
* Fix Z-Wave tests
* Add websocket test without user
* Added support for FutureNow light platform and relay/dimmer units
* Pinned specific version for requirement
* Added support for FutureNow light platform and relay/dimmer units
* Added futurenow.py to .coveragerc.
* Minor fixes and enhancements as requested in the code review.
* Minor fixes and enhancements as requested in the code review.
* Use device_config's value directly as it's validated as boolean.
* Simplify state check.
* Fixed brightness update that was broken in previous commit.
* Allow defining default turn-on values for lights in the profiles file.
* Mock out file operations in unit test.
* Fix unit test flakiness.
* Avoid unnecessary copy
* light.tplink: initialize min & max mireds only once, avoid i/o outside update
* revert the index change
* fix indent, sorry for overwriting your fix, balloob
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
* Update to next version with enum states
* Change to generic dimmer class
* Update of requirement files
* Update to hmip lib to v0.9.7
* Missing update of requirements files
* Cleanup of icon properties
* Fix ZWave RGBW lights not producing color without explicit white_value (#13930)
* simplify conditional in previous commit (#13930)
* ZwaveColorLight - only zero _white if white_value not specified in call (#13930)
* Add HomematicIP Cloud to config flow
* Inititial trial for config_flow
* Integrations text files
* Load and write config_flow and init homematicip_cloud
* Split into dedicated files
* Ceanup of text messages
* Working config_flow
* Move imports inside a function
* Enable laoding even no accesspoints are defined
* Revert unnecassary changes in CONFIG_SCHEMA
* Better error handling
* fix flask8
* Migration to async for token generation
* A few fixes
* Simplify config_flow
* Bump version to 9.6 with renamed package
* Requirements file
* First fixes after review
* Implement async_step_import
* Cleanup for Config Flow
* First tests for homematicip_cloud setup
* Remove config_flow tests
* Really remove all things
* Fix comment
* Update picture
* Add support for async_setup_entry to switch and climate platform
* Update path of the config_flow picture
* Refactoring for better tesability
* Further tests implemented
* Move 3th party lib inside function
* Fix lint
* Update requirments_test_all.txt file
* UPdate of requirments_test_all.txt did not work
* Furder cleanup in websocket connection
* Remove a test for the hap
* Revert "Remove a test for the hap"
This reverts commit 968d58cba1.
* First tests implemented for config_flow
* Fix lint
* Rework of client registration process
* Implemented tests for config_flow 100% coverage
* Cleanup
* Cleanup comments and code
* Try to fix import problem
* Add homematicip to the test env requirements
Previous commit d4f7dfa successfully fixed the bug in which lights
would not turn off if a transition was specified, however if 'bri' is not
present in the payload of the PUT request set to deCONZ, then any
'transitiontime' ends up being ignored. This commit addresses the
unintended side effect by reintroducing 'bri', resulting in the following
payload:
{ "on": false, "bri": 0, "transitiontime": ... }
When light.turn_off is invoked with a transition, the following payload was
sent to deCONZ via PUT to /light/N/state:
{ "bri": 0, "transitiontime": transition }
However, on recent versions of deCONZ (latest is 2.05.31 at the time of
writing) this does not turn off the light, just sets it to minimum brightness
level (brightness is clamped to minimum level the light supports without
turning it off).
This commit makes the code send this payload instead:
{ "on": false, "transitiontime": transition }
This works as intended and the light does transition to the 'off' state.
This change was tested with Philips Hue colored lights, IKEA colored lights
and IKEA white spectrum lights: they were all able to be turned off
successfully with the new payload, and none of them could be turned off with
the old payload.
* Address inconsistent behavior between different controllers.
Correct issue with comparison that was preventing white value slider from being shown.
* Add white mode for Flux LED
* Call _bulb.turnOn() after bulb properties have been set to prevent immediate on action
* Only use existing brightness if rgb is None to prevent unexpected recalculation of passed rgb values.
* Remove blank line
* Undo change so current brightness is used in all cases.
* Fix MQTT Light with RGB and Brightness
When an MQTT light is given an RGB and Brightness topic, the RGB
is scaled by the brightness *as well* as the brightness being set
This causes 255,0,0 at 50% brightness to be sent as 127,0,0 at 50%
brightness, which ends up as 63,0,0 after the RGB bulb has applied
its brightness scaling.
Fixes the same issue in mqtt, mqtt-json and mqtt-template.
Related Issue: #13725
* Add comment to mqtt_json as well
* Expose Wemo component availability to home assistant
* Do not add availability feature to dimmer - it works differently
* Brain fade, deleted completely the wrong thing.
Revert "Do not add availability feature to dimmer - it works differently"
This reverts commit f64e717981.
* (2nd attempt) Do not add availability feature to dimmer - it works differently
* Added platform lw12wifi for Lagute LW-12 Wifi Lights
Supported features:
* RGB colors
* Variable brightness
* 29 effects
* Changing transitions speed for animated effects
* Added lw12wifi to the list of omitted files to test
* Added lw12 module as new requirement for lw12wifi platform
* Added configuration example docstring for platform lw12wifi
* Updating code according to review in PR:
* Removed unused imports: enum, socket.
* Unused and not imported feature SUPPORT_FLASH was removed.
* Unused import lw12 in setup_platform method removed.
* Fixed indention for valuptuous.
* Changed check if effect is None.
* Removed personal debug output.
* Blocking function are not async anymore.
* Further improvements to satisfy PR.
* Unused import asyncio removed.
* Fixed: Return value and docstring no match up for `assumed_state`.
* Check if the set effect is supported, otherwise revert to normal light.
* Added describing missing docstrings to all functions.
* Adopted code to work with HS color setting.
* Syntactical change in comment.
* Removed redefinition of DOMAIN.
* Refactored lw12 controller setup: removed requirement for host and port in LW12Wifi class.
* Rewritten supported feature setup to a more static expression.
* Removed unused rgb_color property
* Fixed typo in comment for set_light_option
* Changed RGB option validation schema
* Removed instance properties as config options
* Removed optional settings to be more inline with code style.
* Removed unused option from config example
* Removal of unused import
* Added property to disable state polling for this entity.
* Raise an exception if an unknown effect was selected.
* Fixed an issue with the check for known effects.
* As we do not need to set a default, use simple accessing by key.
* Log if an unknown effect was selected.
* Added link to future documentation.
* Simplify conditionals.
* Send white_value on service call.
* Remove extra blank line
* Further simplification of conditionals
* Requested changes
* Do not call getRgb if not needed
* Update log message
* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Add support for shutter contact and motion detector device
* Add support for power switch devices
* Add support for light switch device
* Cleanup binary_switch and light platform
* Update comment
* Setup all-linking service
* Remove extra line
* Remove linefeed and tab escape chars
* Add services delete_all_link, load_all_link_database and print_all_link_database
* Check if reload is set
* Confirm entity is InsteonPLMEntity before attempting to load or print ALDB
* Debug load and print ALDB
* Debug print aldb
* Debug print_aldb
* Get entity via platform
* Track Insteon entities in component
* Store entity list in hass.data
* Add entity to hass.data
* Add ref to hass in InsteonPLMEntity
* Pass hass correctly to InsteonPLMBinarySensor
* Fix reference to ALDBStatus.PARTIAL
* Print ALDB record as string
* Get ALDB record from memory address
* Reformat ALDB log output
* Add print_im_aldb service
* Remove reference to self in print_aldb_to_log
* Remove reference to self in print_aldb_to_log
* Fix spelling issue with load_all_link_database service
* Bump insteonplm to 0.9.1
* Changes from code review
* Code review changes
* Fix syntax error
* Correct reference to cv.boolean and update requirements
* Update requirements
* Fix flake8 errors
* Reload as boolean test
* Remove hass from entity init
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Allow independent control of white level on flux_led component.
Also preserve brightness on color change.
* Limit white value support to RGBW mode.
* Requested changes.
* Correct liniting issues
* Formatting
Eufy device state isn't reported if the bulb is off, so avoid stamping on
the previous values if the bulb isn't going to give us useful information.
In addition, improve handling of bulb turn on if we aren't provided with a
brightness - this should avoid the bulb tending to end up with a brightness of
1 after power cycling.
* Use forward entry setup with light platform
* Move sensor to forward entry setup
* Use forward entry setup with binary sensors
* Use forward entry setup with scene platform
* Remove import of unused functionality
* Move deconz setup in to setup entry
Create initial negative tests for setup entry
* Fix hound comment
* Improved tests
* Add test for scene platform
* Add test for binary sensor platform
* Add test for light platform
* Add test for light platform
* Add test for sensor platform
* Fix hound comment
* More asserts on sensor types
* Fix up Eufy handling of colour lights
The Eufy colour lights have separate colour and temperature modes, and give
much less light output when in colour mode. Brightness is also handled in
a slightly confusing way, which means that state must be maintained in
order to avoid switching the light between modes by accident. Add some
additional handling for that.
* Bump the lakeside version
This version has important bugfixes for colour bulbs.
* Hound fixes
* Add support for controlling homekit lights and switches
This adds support for controlling lights and switches that expose a HomeKit
control interface, avoiding the requirement to implement protocol-specific
components.
* Comment out the homekit requirement
This needs to build native code, so leave it commented for now
* Review updates
* Make HomeKit auto-discovery optional
Add an "enable" argument to the discovery component and add a list of
optional devices types (currently just HomeKit) to discover
* Further review comments
* Update requirements_all.txt
* Fix houndci complaints
* Further review updates
* Final review fixup
* Lint fixups
* Fix discovery tests
* Further review updates
* Add support for Eufy bulbs and switches
Add support for driving bulbs and switches from the Eufy range.
* Fix hound checks
* Satisfy pylint
* Handle review comments
* Review updates and test fixes
* PyLint is a bit too aggressive
With AbodePy 0.12.3, dimmers will now work but a conversion of the brightness is required. Additionally, when a brightness value of 100 is sent to Abode, 99 is returned causing AbodePy to throw an error so this component will send 99 instead of 100.
Keeps the brightness value sent and returned from the device response consistent. However, during initialization and when a device refresh is received, Abode can return 100 thus we'll convert that case back to 99.
* Handle turn_on situation when no color is set
As is, an error gets thrown when turn_on is called without an HS value. By adding an if statement, we only try to set RGB if an HS value is applied.
* Fix Whitespace Issues
* Made Requested Changes
* unique_ids for tradfri lights and groups
* set color temperature on CWS bulb
Cannot set_color_temp on color bulb, needs conversion from mired to hsb
* make travis happy
* change condition so we ensure color bulbs are included, change comments.
* New service added to control the power mode of the yeelight
* Debug output removed.
* Strict validation of the available power modes
* Service description added
* Service parameter name fixed
Jarle B. Hjortand
Sören Oldag
Rendili
Alistair Galbraith
emontnemery
sander76
Daniel Chesterton
carstenschroeder
Andre Lengwenus
Jc2k
Alexei Chetroi
David F. Mulcahey
Andrew Loe
Michael Dubno
Adam Belebczuk
Otto Winter
Colin Harrington
pbalogh77
Paulus Schoutsen
Eric Nagley
javicalle
Fredrik Erlandsson
Sebastian Muszynski
Sean Wilson
Teemu R
GeoffAtHome
Adam Mills
damarco
Austin
Fabian Affolter
Kacper Krupa
cdheiser
mopolus
Franck Nijhof
Daniel Perna
Anders Melchiorsen
Levi Govaerts
Matthew Garrett
Robert Svensson
Anton Sarukhanov
Rohan Kapoor
Ville Skyttä
Matt Snyder
Bob Clough
Thomas Lovén
Charles Garwood
Julius Mittenzwei
Daniel Shokouhi
Jedmeng
shred86
Glenn Waters
cdce8p
Greg Laabs
Zoé Bőle
Nikolay Kasyanov
Harvtronix
Maciej Bieniek
Tom Harris
Paulus Schoutsen
Max Prokhorov
Thomas Delaet
Juha Niemi
Jonathan Keljo
Jens Østergaard Nielsen
Daniel Kalmar
Mattias Welponer
huangyupeng
Jason Antman
Leonardo Brondani Schenkel
Martin Hjelmare
Thibault Cohen
gstorer
Hate-Usernames
austinlg96
Julian Knauer
Marco Orovecchia
Diogo Gomes
William Scanlon
Matthew Garrett
Kerwin Bryant
Khole
Johann Kellerman
Niklas Wagner
Lewis Juggins
dramamoose
NovapaX
Lewis Juggins
Lindsay Ward
a-andre