* Update ZHA dependencies
* Update zigpy-zigate
* Move ZNP on top of the radios so it's probed 1st
Some stick don't like if there was some unexpected traffic on the port
prior the initialization.
* Update dependencies
* Add support for events from Loitering guard and Motion guard
* Improve naming of events originating from applications Fence guard and VMD4 (Loitering guard and motion guard also benefit from this)
* Opened a new fresh page to clean my mess.
* Solved pylint warnings
* Fixing pylint issue of defining attr outside init.
* Excluded files from being tested by codecov.
* Solved binary sensor error.
* Fixed some stylisation errors.
* Resolved input not updating problem.
* Added port entry to test file.
* Added tests for create_entry.
* Added support for better state management.
* Increased code coverage of config_flow.py & made some tweaks.
* Increased coverage of config_flow.py by adding tests for unknown exceptions.
* A small bugfix.
* Stylised code as per Chris' suggestions.
* Stylised code again.
* Improved quality of test code.
* Added step_id in config flow tests.
* Add basic light platform
* Add sensor support
* Bump aioshelly to 0.2.1
* Lint
* Use UNIT_PERCENTAGE
Co-authored-by: Maciej Bieniek <bieniu@users.noreply.github.com>
* Format sensor.py
Co-authored-by: Maciej Bieniek <bieniu@users.noreply.github.com>
Some new HomeKit climate devices, like XiaoMi Air Conditioning Controller P3 are heater-cooler devices rather than
thermostat devices. This commit adds support for the heater-cooler class via homekit_controller.
* Implement config flow in the Broadlink integration
* General improvements to the Broadlink config flow
* Remove unnecessary else after return
* Fix translations
* Rename device to device_entry
* Add tests for the config flow
* Improve docstrings
* Test we do not accept more than one config entry per device
* Improve helpers
* Allow empty packets
* Allow multiple config files for switches related to the same device
* Rename mock_device to mock_api
* General improvements
* Make new attempts before marking the device as unavailable
* Let the name be the template for the entity_id
* Handle OSError
* Test network unavailable in the configuration flow
* Rename lock attribute
* Update manifest.json
* Import devices from platforms
* Test import flow
* Add deprecation warnings
* General improvements
* Rename deprecate to discontinue
* Test device setup
* Add type attribute to mock api
* Test we handle an update failure at startup
* Remove BroadlinkDevice from tests
* Remove device.py from .coveragerc
* Add tests for the config flow
* Add tests for the device
* Test device registry and update listener
* Test MAC address validation
* Add tests for the device
* Extract domains and types to a helper function
* Do not patch integration details
* Add tests for the device
* Set device classes where appropriate
* Set an appropriate connection class
* Do not set device class for custom switches
* Fix tests and improve code readability
* Use RM4 to test authentication errors
* Handle BroadlinkException in the authentication
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Avoid reading meters on startup
Cherrypick @bdraco's suggestion
* Run scaffold script
* Update version
* Bump version
* Initial commit
* Move meter and ESIID to device attributes
* Update internal to hourly due to api limit
* Format with Black
* Fix typo
* Update tests
* Update description
* Disable Pylint error
* Don't commit translations
* Remove meter number from sensor name
* Allow multiple meters per account
* Move data updates to a DataUpdateCoordinator
* Use setdefault to setup the component
* Move strings to const.py
* Fix tests
* Remove meter last updated attribute
* Bump smart-meter-texas version
* Fix logger call
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove unneeded manifest keys
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon property
Co-authored-by: J. Nick Koston <nick@koston.org>
* Handle instance where user already setup an account
Co-authored-by: J. Nick Koston <nick@koston.org>
* Remove icon constant
* Fix indentation
* Handle config flow errors better
* Use ESIID + meter number as unique ID for sensor
* Update config flow tests to reach 100% coverage
* Remove unnecessary try/except block
This checks for the same exception just prior in execution on L51.
* Remove unused return values
* Add tests
* Improve tests and coverage
* Use more pythonic control flow
* Remove all uses of hass.data
Co-authored-by: J. Nick Koston <nick@koston.org>
* Bump pysyncthru version to 0.7.0
This change includes a heavier refactoring, using a more reliable source for the device status and parsing display strings only for additional details
* Fix test flow to ensure a status is set
* Squashed
* Fix requirements_all
* Update homeassistant/components/insteon/__init__.py
Only update options if the result is to create the entry.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/insteon/__init__.py
No return value needed.
Co-authored-by: J. Nick Koston <nick@koston.org>
* Ref RESULT_TYPE_CREATE_ENTRY correctly
* Return result back to import config process
* Make DOMAIN ref more clear
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update Tesla to use DataUpdateCoordinator
* Update Tesla to use DataUpdateCoordinator
* Fix linting errors
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Address requested changes
* Apply suggestions from code review
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Fix lint errors
* Remove controller from hass.data
Co-authored-by: Chris Talkington <chris@talkingtontech.com>
* Fix webhook registration
* Only load camera platform with valid scope
* Add initial data handler and netatmo base class
* Update camera to use data handler
* Update init
* Parallelize API calls
* Remove cruft
* Minor tweaks
* Refactor data handler
* Update climate to use data handler
* Fix pylint error
* Fix climate update not getting fresh data
* Update climate data
* update to pyatmo 4.0.0
* Refactor for pyatmo 4.0.0
* Exclude from coverage until tests are written
* Fix typo
* Reduce parallel calls
* Add heating request attr
* Async get_entities
* Undo parallel updates
* Fix camera issue
* Introduce individual scan interval per device class
* Some cleanup
* Add basic webhook support for climate to improve responsiveness
* Replace ClimateDevice by ClimateEntity
* Add support for turning camera on/off
* Update camera state upon webhook events
* Guard data class registration with lock
* Capture errors
* Add light platform
* Add dis-/connect handling
* Fix set schedule service
* Remove extra calls
* Add service to set person(s) home/away
* Add service descriptions
* Improve service descriptions
* Use LightEntity instead of Light
* Add guard if no data is retrieved
* Make services entity based
* Only raise platform not ready if there is a NOC
* Register webhook even during runtime
* Fix turning off event
* Fix linter error
* Fix linter error
* Exclude light platform from coverage
* Change log level
* Refactor public weather sensor to use data handler
* Prevent too short coordinates
* Ignore modules without _id
* Code cleanup
* Fix test
* Exit early if no home data is retrieved
* Prevent discovery if already active
* Add services to (un-)register webhook
* Fix tests
* Not actually a coroutine
* Move methods to base class
* Address pylint comment
* Address pylint complaints
* Address comments
* Address more comments
* Add docstring
* Use single instance allowed
* Extract method
* Remove cruft
* Write state directly
* Fix test
* Add file to coverage
* Move nested function
* Move nested function
* Update docstring
* Clean up code
* Fix webhook bug
* Clean up listeners
* Use deque
* Clean up prints
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/netatmo/camera.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Rename data_class variable
* Break when match
* Extract method
* Extract methods
* Rename variable
* Improve comment
* Some refinements
* Extra
* Extract method
* Simplify code
* Improve reability
* Code simplification
* Simplify code
* Simplify code
* Code cleanup
* Fix import
* Clean up
* Clean up magic strings
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with CAMERA_DATA_CLASS_NAME
* Replace data_class_name with HOMEDATA_DATA_CLASS_NAME
* Replace data_class_name in public weather sensor
* Clean up
* Remove deprecated config options
* Schedule immediate update on camera reconnect
* Use UUID to clearly identify public weather areas
* Use subscription mode
* Move clean up of temporary data classes
* Delay data class removal
* Fix linter complaints
* Adjust test
* Only setup lights if webhook are registered
* Prevent crash with old config entries
* Don't cache home ids
* Remove stale code
* Fix coordinates if entered mixed up by the user
* Move nested function
* Add test case for swapped coordinates
* Only wait for discovery entries
* Only use what I need
* Bring stuff closer to where it's used
* Auto clean up setup data classes
* Code cleanup
* Remove unneccessary lock
* Update homeassistant/components/netatmo/sensor.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/netatmo/test_config_flow.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Clean up dead code
* Fix formating
* Extend coverage
* Extend coverage
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add config flow to HLK-SW16
* Use entry_id for unique_id
* Add options update capability
* Refactor entry_id under domain
* Remove name from config
* Set options
* Remove options flow
* remove unneccesary else block from validate_input and move domain cleanup to async_unload_entry
* Add tests and config import
* Add back config schema
* Remove config import
* Refactor unload
* Add back config import
* Update coveragerc
* Don't mock validate_input
* Test duplicate configs
* Add import test
* Use patch for timeout test
* Use mock for testing timeout
* Use MockSW16Client for tests
* Check mock_calls count
* Remove unused NameExists exception
* Remove title from strings.json
* Mock setup for import test
* Set PARALLEL_UPDATES for switch
* Move hass.data.setdefault(DOMAIN, {}) to async_setup_entry
* Bump the numato-gpio dependency
This relaxes the pyserial dependency to >=3.1.1 as requested by the
project with respect to the upcoming, stricter pip resolver.
* Update numato-gpio due to deprecation of class BinarySensorDevice
Alexei Chetroi
Quentame
Bram Kragten
On Freund
Tom
J. Nick Koston
Robert Svensson
Maciej Bieniek
kennedyshead
Martin Hjelmare
Joakim Plate
Robert Van Gorkom
Keilin Bickar
Evgeny
Franck Nijhof
Anders Melchiorsen
Tomer Figenblat
Paulus Schoutsen
Ziv
Michael Thingnes
Raman Gupta
rajlaud
Xiaonan Shen
SukramJ
David F. Mulcahey
Arda ŞEREMET
Andrew Marks
Chris Talkington
jgrob1
Paul Daumlechner
Ville Skyttä
matgad
Marty Zalega
bsmappee
Daniel Hjelseth Høyer
Yuxiang Zhu
Leonardo Figueiro
Paul Madden
Fabian Affolter
jjlawren
Felipe Martins Diel
James Hilliard
Ivan Belokobylskiy
Graham Wetzler
Erik Montnemery
Charles Garwood
Thomas Delaet
Jc2k
Oncleben31
Chris Caron
Aidan Timson
Niels Mündler
Kit Klein
Aaron Bach
Greg Dowling
Jeff Irion
Tom Harris
Eric Severance
Brian Rogers
Joakim Sørensen
etheralm
Andrew Sayre
Markus Bong
Marcio Granzotto Rodrigues
Eugenio Panadero
Alan Tse
Pascal Vizeli
DelusionalAI
Steffen Zimmermann
Kevin Fronczak
chewbh
Peter Nijssen
cgtobi
Daniel Perna
Davide Varricchio
clssn