* Fixes for mclimate accounts with not only melissa components
* Fixes melissa sensor to only use HVAC
* Bumping version to 1.0.3 and remove OP_MODE that is not supported
* Removes STATE_AUTO from translation and tests
* Added python-spotcrime sensor
* Added python-spotcrime sensor
* Remove accidental included file
* Update indentation to match PEP8
* Remove days from const.py
* Changed default days to 1
* Incorporate changes requested by MartinHjelmare
* Remove unnecessary import and fix lint error
* Adds folder sensor
The state of the sensor is the time that the most recently modified
file in a folder was modified.
* Address lint errors
* Edit docstrings
Makes the recommended edits to docstrings
* Update .coveragerc
Add sensor/folder.py
* Update folder.py
* Address requests
Address requests changes
* Adds folder
* Adds test, tidy up
* Tidy
* Update test_folder.py
* Update folder.py
* Fix setup
Fix setup with else statement
* Update folder.py
* Update folder.py
* Remove list of files from attributes
* Update test_folder.py
* Update folder.py
* Update test_folder.py
* Update folder.py
* Update folder.py
* first working version of BMW connected drive sensor
* extended coveragerc
* fixed blank line
* fixed pylint
* major refactoring after major refactoring in bimmer_connected
* Update are now triggered from BMWConnectedDriveVehicle.
* removed polling from sensor and device_tracker
* backend URL is not detected automatically based on current country
* vehicles are discovered automatically
* updates are async now
resolves:
* https://github.com/ChristianKuehnel/bimmer_connected/issues/3
* https://github.com/ChristianKuehnel/bimmer_connected/issues/5
* improved exception handing
* fixed static analysis findings
* fixed review comments from @MartinHjelmare
* improved startup, data is updated right after sensors were created.
* fixed pylint issue
* updated to latest release of the bimmer_connected library
* updated requirements-all.txt
* fixed comments from @MartinHjelmare
* calling self.update from async_add_job
* removed unused attribute "account"
* added smappee component
* Fixed pylint errors and a few use cases when starting up with invalid credentials
Added coverage omit
* Added support to run only locally
Added a few more sensors
Added more error handling
Better parsing and debug message
* fixed smappee switch after local/remote support was added
* Smappee - update switches for local support (#3)
* Merged with local version
* Updated smappy library with the patched one
Fixed lint, added merge missing param
Fixed missing run for requirements_all.txt
Fixed lint
* Fixed on/off based on library. Reverted change used for testing stacktrace
* Fixed switches to work with both remote and local active
Fixed lint
Fixed switches
Fixed lint
* nothing to update per switch as the states are not saved by smappee system
* added better error handling for communication errors with smappee
* fixed lint errors
* fixed comment
* fixed lint error
* fixed lint error
* update smappee module with reviewer comments
- update smappy module
- cache cloud api requests
- added actuator info
- updated return states
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* fix comment
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Spread the load more for the yr.no sensor
* Update yr.py
* 🐎 Async WUnderground
* ∞ Them lines be too long
* Fix pylint warnings
* Changes according to comments
* Remove STATE_UNKNOWN
* 🔬 Fix tests
* Improve tests
* AirVisual: Entity Registry updates and cleanup
* Small cleanup
* Owner-requested changes
* Changed hashing function
* Put a better class instatiation mechanism in place
* Small cleanup
* Reverting unintended breaking change
* Removing hashing as part of creating the unique ID
* Attempting to jumpstart Travis
* Improve service by allowing to reference entity id instead of deconz id
* Change from having access to full entities to only store entity id together with deconz id
* Don't use eval, there is a dict type for voluptuous
* Use entity registry instead of keeping a local registry over entity ids
* Removed old code
* Add test for get_entry
* Bump dependency to v28
Fixed call to protected member
* Use chain to iterate over dict values
* Cleanup
* Fix hound comment
* Cleanup
* Follow refactoring of entity
* Revert to using a local registry
* Remove unused import
* self.hass is automatically available when entity is registered in hass
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
* Fix some rfxtrx devices with multiple sensors
Some combined temperature/humidity sensors send one packet for each of
their sensors. Without this fix one of the home assistant sensors would
always display an unknown value.
* Add comment
* Correct time on recorder loaded values in statistics sensor
Previously, the current time was used when initial values was loaded
form the recorder component. This changes that to use the stored time
from recorder instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Expose min / max age of values in the statistics sensor
This is very useful when doing derived calculations, for example in a
template sensor.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Fix duplicate entity_ids in System Monitor
This fix makes it so `_percent` is appended to the `entity_id` of the following 3 resources, in order to make the `entity_id` unique:
- disk_use_percent
- memory_use_percent
- swap_use_percent
* match entity_id to resource name
Match entity_id to resource name, to make resulting entity_id more predictable
* match entity_id to more resource names
match entity_id to more resource names
* Add unique_id property
* Revert "Add unique_id property"
This reverts commit c213ac360e.
* added more debug logging for sensor.alpha_vantage
* fixed typo in log statement, more fine grained logging
* Capitalized first character in log statement
* replaced quotes as proposed by @OttoWinter
* Add Mercedes me component
* pump api version to 0.1.2
* Add Mercedes me component
* pump api version to 0.1.2
* clean up code
* Code cleanup
* Remove unneeded return statement
* Return statements added again
* Implement requested changes
* Rework component, move data load to component
* lint
* remove debug logging
* Change RainCloud comments, change from track_utc_time to track_time_interval
* Final cleanup for version 1
* Entity#unique_id defaults to None
* Initial commit entity registry
* Clean up unique_id property
* Lint
* Add tests to entity component
* Lint
* Restore some unique ids
* Spelling
* Remove use of IP address for unique ID
* Add tests
* Add tests
* Fix tests
* Add some docs
* Add one more test
* Fix new test…
* sensor.deutsche_bahn: add only_direct option
This adds the `only_direct` option to the HA interface as provided by the schiene class.
* fix line length
as requested by @houndci-bot and @fabaff
* No line breaks needed
* Fixed Canary temperature sensor and remapped air quality value
* Addressed review comment
* - Fixed canary tests and added more tests
- Removed py-canary requirements from tests
* Noop to trigger a build again
* - Removed py-canary requirements from tests
* Addressed PR comment
* - Updated tests
- Removed py-canary from gen_requirements_all.py
* - Fixed hound violation
* Added back py-canary to gen_requirements_all.py as it's still need in tests
* Added back py-canary to test requirements as it's still need in tests
* Address PR comment
* Base platform in place
* Logic in place
* Requirements and coverage
* Fixed some linting issues
* Small attribute reorganization
* Collaborator-requested changes round 1
* Updated documentation
* worked on first version of IOTA wallet
* added sensor for IRI node
* added requirements
* ignored new component in test coverage
* changed length of line
* fixed linter issues
* changed requested changes
* moved attributes of IRI node
* change coverage definitions
* changed loading of platforms
* changed loading of platforms
* changed initial state of wallet sensor
* changed handling of config
* changed attribute handling for IOTA node sensor
* Follow the component style
* Fix ordering and docstring
* Fix pylint issue
* Added documentation reference to code
* Some code clean-ups suggested by @MartinHjelmare in PR#: 11695 after merging.
* fixed minor typo in docstring
* fixed another minor typo in same docstring...
* fixed another minor typo in same docstring...
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* added unavailability tracker, updated sensor component
* change hass argument position according to position in binary_sensor
* added hass argument to binary_sensor, updated is_on(), it can be UNAVAILABLE now
* updated switch component to support unavailability feature
* updated light component to support unavailability feature
* updated cover component to support unavailability feature
* set _hass property
* fixed error with wrong arguments number during callback call
* reset unavailability state on new message received from device
* use locks to fix race condition during managing _state property
* overriden state() method for some components to check for STATE_UNAVAILABLE and return it instead e.g. STATE_OFF
* fixed linter
* removed blank line
* use available() method instead of changing _state
* filter motion sensors 'heartbeat', was removed from PyXiaomiGateway
* remove self._hass, use self.hass set by HA on attach
* self.push_data now running in the event loop, use async_schedule_update_ha_state()
* merge fix
* removed accidentally added home-assistant-polymer
* bump PyXiaomiGateway version to 0.8.0
* bump PyXiaomiGateway to 0.8.0
* updated methods names and annotations
* Adding BME680 Sensor Component
* Flake8 lint fixes
* PyLint fixes
* Fix for log line
* Updating requirements for testing
* Fix PyLint Log format errors and add to coveragerc ommisions as requires sensor connected
* Regenerated requirements_all.txt
* Added Pylint exception for import error of system specific library
* Refactored async_add_platform to move IO out to avoid heavy yield usage
Add waterfurnace platform
This adds support for waterfurnace geothermal systems. This is
implemented as a component as there will eventually be some active
control elements. This is not done as a climate platform because
geothermal systems work best when set at a constant temperature as
they are tuned to keep within 0.5 degrees F of a setpoint, and large
temperature shifts are slow and expensive.
This is done in the Data + Sensors model, with the Data component
having a regular update thread. That thread needs to call the read()
function at least every 30 seconds otherwise the underlying websocket
is closed by the server.
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Added IHC platform
* Updated requirements for IHC platform
* Exclude IHC from test
* Correcting flake8 issues
* Fixing more flake8 issues
* Fixed flake8 issues
* Fixing pylint issues
* Fixed flake8 issues
* Changes from PR review.
* STATE_UNKNOWN changed to None
* Spelling mistake in comment
* Updated requirements_all.txt with gen_requirements_app.py
* Pylint fix: No space allowed around keyword argument assignment
* PR review changes
* Moved auto setup from platforms to ihc component
* Do no auto setup if there are no IHC products found
* Changes from PR review
* Updated bluepy to version 1.1.4 as some issues with the native code were fixed there.
* Miflora - Added support for bluepy backend.
* miflora - now using bluepy backend on linux platforms
* fixed pylint findings
* miflora now using bluepy as default bluetooth backend and gatttool as fallback
* fixed hound complaints
* fixed pylint warning
* updated requirements
* Update miflora.py
* Added support for TekSavvy bandwidth sensor
* Variable name fix
* Units are Gigabytes and not Gigabits
* Change REST calls to use asyncio
* houndci violation fix
* pylint fix
* Fix for code review
* Import order asyncxxx:wq
* Tweak docstrings and log message
* Add 'last' type to min/max sensor
Now supports types: min, max, mean, last
'last' is the most recently received value from all tracked entities.
* Min/max sensor 'last' type test
* Fix min/max sensor 'last' test
* mychevy: added basic mychevy component
This implements a component using the mychevy library (which utilizes
selenium to webscrape the mychevy website for onstar for your
car). The architecture works by having a background thread doing
periodic polling of the website, and updating the sensors when new
data is found.
This requires rather more setup than most platforms, as you need
working selenium. Instructions will be provided on the component
list. All the sensors are spawned and coordinated from a single "hub"
as they are really just attributes of the same web scraping session.
* mychevy: only poll every 30 minutes
* mychevy: update sensors
* mychevy: better error handling
* mychevy: tweaking for refactor
* mychevy: bump version to handle odometer > 1000
* mychevy: great sensor reorg
* mychevy: add binary sensors
* mychevy: bump mychevy requirement
* mychevy: use dispatcher
Instead of directly modifying the sensors, this lets us use a
dispatcher to have sensors pull information from the car object when
there is a relevant update for them.
* mychevy: remove from coverage
* mychevy: dedicated constants for dispatch signals
This makes the dispatch signals dedicated topics, and fixes updating
the state on the sensors so that they are correctly updated.
* mychevy: updated with comments from martinhjelmare
* mychevy: set battery icon based with helper function
* Address additional review feedback
* Address additional review comments
* Deprecate explicit entity_id in template platforms
* Use config validator for deprecation
* Fix copy/paste typos
* Also print the config value
* Add test for config validator
* Assert the module name that logged the message
* Switch the ZoneMinder event sensor over to use the consoleEvents API, and add monitored_conditions for 'hour', 'day', 'week', 'month' and 'all'. 'all' is enabled by default to provide backward compatibility with the old behaviour.
* - Switch to new string formatting
- Remove redundant validator
* De-lint
* Extended sensor alpha_vantage
* Improved error handling if symbol is not found. Now we add the symbols that were found,
* Added option to give names and currencies to symbols.
* Added support to read foreign exchange information.
* Icons are selected based on the currency (where MDI has a matching icon)
* added missing line at the end of the file...
* renamed variable as required by pylint
* Fix typos, ordering, and style
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
* Added Daikin climate component
* Fixed tox & hound
* Place up the REQUIREMENTS var
* Update .coveragerc
* Removed unused customization
* Prevent setting invalid operation state
* Fixed hound
* Small refactor according to code review
* Fixed latest code review comments
* Used host instead of ip_address
* No real change
* No real change
* Fixed lint errors
* More pylint fixes
* Shush Hound
* Applied suggested changes for temperature & humidity settings
* Fixed hound
* Fixed upper case texts
* Fixed hound
* Fixed hound
* Fixed hound
* Removed humidity since even the device has the feature it cant be set from API
* Code review requested changes
* Fixed hound
* Fixed hound
* Trigger update after adding device
* Added Daikin sensors
* Fixed hound
* Fixed hound
* Fixed travis
* Fixed hound
* Fixed hound
* Fixed travis
* Fixed coverage decrease issue
* Do less API calls and fixed Travis failures
* Distributed code from platform to climate and sensor componenets
* Rename sensor state to device_attribute
* Fixed hound
* Updated requirements
* Simplified code
* Implemented requested changes
* Forgot one change
* Don't allow customizing temperature unit and take it from hass (FOR NOW)
* Additional code review changes applied
* Condensed import even more
* Simplify condition check
* Reordered imports
* Disabled autodiscovery FOR NOW :(
* Give more suggestive names to sensors
* Updated plexapi to 3.0.5
* Removed removed server obj that was being used for the media URL generation as .url() is available in self._session
seasons() no longer exists -> renamed to season()
season() returns obj not list so corrected
season.index returns int, cast to str to zerofill
* Fixed Linting
* Base implementation of component, no sensors yet
* Added senor files
* First fully working chain of sensors and binary sensors going from hardware in to hass
* Clean up
* Clean up
* Added light platform
* Turning lights on and off and set brightness now works
* Pydeconz is now a proper pypi package
Stop sessions when Home Assistant is shutting down
Use a simpler websocket client
* Updated pydocstrings
Followed recommendations from pylint and flake8
* Clean up
* Updated requirements_all.txt
* Updated Codeowners to include deconz.py
Also re-added the Axis component since it had gotten removed
* Bump requirement
* Bumped to v2
Reran script/gen_requirements
* Removed global DECONZ since it wasn't relevant any more
* Username and password is only relevant in the context of getting a API key
* Add support for additional sensors
* Added support for groups
* Moved import of component library to inside of methods
* Moved the need for device id to library
* Bump pydeconz to v5
* Add support for colored lights
* Pylint and flake8 import improvements
* DATA_DECONZ TO DECONZ_DATA
* Add support for transition time
* Add support for flash
* Bump to v7
* ZHASwitch devices will now only generate events by default, instead of being a sensor entity
* Clean up
* Add battery sensor when device signals through an event
* Third-party library communicates with service
* Add support for effect colorloop
* Bump to pydeconz v8
* Same domain everywhere
* Clean up
* Updated requirements_all
* Generated API key will now be stored in a config file
* Change battery sensor to register to callback since library now supports multiple callbacks
Move DeconzEvent to hub
Bump to v9
* Improve entity attributes
* Change end of battery name to battery level
No need for static icon variable when using battery level helper
* Bump requirement to v10
* Improve pydocstring for DeconzEvent
Rename TYPE_AS_EVENT to CONF_TYPE_AS_EVENT
* Allow separate brightness to override RGB brightness
* Expose device.reachable in entity available property
* Bump requirement to 11 (it goes up to 11!)
* Pylint comment
* Binary sensors don't have unit of measurement
* Removed service to generate API key in favor of just generating it as a last resort of no API key is specified in configuration.yaml or deconz.conf
* Replace clear text to attribute definitions
* Use more constants
* Bump requirements to v12
* Color temp requires xy color support
* Only ZHASwitch should be an event
* Bump requirements to v13
* Added effect_list property
* Add attribute to battery sensor to easy find event id
* Bump requirements to v14
* Fix hound comment
* Bumped requirements_all information to v14
* Add service to configure devices on deCONZ
* Add initial support for scenes
* Bump requirements to v15
* Fix review comments
* Python doc string improvement
* Improve setup and error handling during setup
* Changed how to evaluate light features
* Remove 'ghost' events by not triggering updates if the signal originates from a config event
Bump requirement to v17
* Fix pylint issue by moving scene ownership in to groups in requirement pydeconz
Bump requirement to v18
* Added configurator option to register to deCONZ when unlocking gateway through settings
Bump requirement to v20
* Improve async configurator
* No user interaction for deconz.conf
* No file management in event loop
* Improve readability of load platform
* Fewer entity attributes
* Use values() instead of items() for dicts where applicable
* Do one add devices per platform
* Clean up of unused attributes
* Make sure that discovery info is not None
* Only register configure service and shutdown service when deconz has been setup properly
* Move description
* Fix lines longer than 80
* Moved deconz services to a separate file and moved hub to deconz/__init__.py
* Remove option to configure switch as entity
* Moved DeconzEvent to sensor since it is only Switch buttonpress that will be sent as event
* Added support for automatic discovery of deconz
Thanks to Kroimon for adding support to netdisco
* Use markup for configuration description
* Fix coveragerc
* Remove deCONZ support from Hue component
* Improved docstrings and readability
* Remove unnecessary extra name for storing in hass.data, using domain instead
* Improve readability by renaming all async methods
Bump to v21 - improved async naming on methods
* Fix first line not being in imperative mood
* Added logo to configurator
Let deconz.conf be visible since it will be the main config for the component after initial setup
* Removed bridge_type from new unit tests as part of removing deconz support from hue component
* Capitalize first letters of Battery Level
* Properly update state of sensor as well as reachable and battery
Bump dependency to v22
* Fix flake8 Multi-line docstring closing quotes should be on a separate line
* Fix martinhjelmares comments
Bump dependency to v23
Use only HASS aiohttp session
Change when to use 'deconz' or domain or deconz data
Clean up unused logger defines
Remove unnecessary return values
Fix faulty references to component documentation
Move callback registration to after entity has been initialized by HASS
Less inception style on pydocs ;)
Simplify loading platforms by using a for loop
Added voluptous schema for service
Yaml file is for deconz only, no need to have the domain present
Remove domain constraint when creating event title
* add required files
* add sochain sensor
* add missing schema
* end first sentence with a period to make travis happy
* upgrade to python-sochain-api 0.0.2 and use asyncio
* add missing _LOGGER and fix long line
* move object setup to async_setup_platform
* rename chainSo variable to chainso
* Huge ISY994 platform cleanup, fixes support for 5.0.10 firmware
# * No more globals - store on hass.data
# * Parent ISY994 component handles categorizing nodes in to Hass components, rather than each individual domain filtering all nodes themselves
# * Remove hidden string, replace with ignore string. Hidden should be done via the customize block; ignore fully prevents the node from getting a Hass entity
# * Removed a few unused methods in the ISYDevice class
# * Cleaned up the hostname parsing
# * Removed broken logic in the fan Program component. It was setting properties that have no setters
# * Added the missing SUPPORTED_FEATURES to the fan component to indicate that it can set speed
# * Added better error handling and a log warning when an ISY994 program entity fails to initialize
# * Cleaned up a few instances of unecessarily complicated logic paths, and other cases of unnecessary logic that is already handled by base classes
* Use `super()` instead of explicit base class calls
* Move `hass` argument to first position
* Use str.format instead of string addition
* Move program structure building and validation to component
Removes the need for a bunch of duplicate exception handling in each individual platform
* Fix climate nodes, fix climate names, add config to disable climate
Sensor platform was crashing when the ISY reported climate nodes. Logic has been fixed. Also added a config option to prevent climate sensors from getting imported from the ISY. Also replace the underscore from climate node names with spaces so they default to friendly names.
* Space missing in error message
* Fix string comparison to use `==`
* Explicitly check for attributes rather than catch AttributeError
Also removes two stray debug lines
* Remove null checks on hass.data, as they are always null at this point
* Use constant for offline state
* Use constant for no game name
* Rename trade and play constant their proper names
Trade and Play are not the correct names for the states. For instance
Play might be seens as the user is actually is playing, which is not
correct as there is no such state is returned from the Steam API.
Just having "trade" does not say much about what is happening and
might be misintepreted that the user is currently trading, which is not
correct either.
We instead use the names from the underlying library for naming the
states [1]
[1] 2e518ad84f/steam/user.py (L109)
* Get the proper game name if no extra info is given from the api
The third `current_game` parameter that was used before hold
extra information about the game that is being played. This might
contain the game name, it might also be empty. The correct way to
get the game name is to fetch it from the API depending on the
game id that might be returned in the `current_game` attribute if
the user is playing a game.
To not break existing implementations we keep the functionality
to first go with the extra information and only then fetch the proper
game name.
* Refactor getting game name to its own function
This cleans up the code and removed "ugly" else statements
from the sensor and makes the game fetching easier to read.
* Let state constant values be lower snake case
* Return None instead of 'None' when no current game exists
* Initialize steam app list only once to benefit form caching
* Return None as state attributes if no current game is present
* Fix statistics sensor mean and median when only one sample is available.
With only one data point stddev and variance throw an exception.
This would clear the (valid) mean and median calculations.
Separate the try..catch blocks for one-or-more and two-or-more stats so
that this doesn't happen.
Test this with a new sampling_size_1 test.
* test_statistics trivial whitespace fix
* Fire events for ISY994 control events
This allows hass to react directly to Insteon button presses (on switches and remotes), including presses, double-presses, and long holds
* Move change event subscription to after entity is added to hass
The event handler method requires `self.hass` to exist, which doesn't have a value until the async_added_to_hass method is called. Should eliminate a race condition.
* Overhaul binary sensors in ISY994 to be functional "out of the box"
We now smash all of the subnodes from the ISY994 in to one Hass binary_sensor, and automatically support both paradigms of state reporting that Insteon sensors can do. Sometimes a single node's state represents the sensor's state, other times two nodes are used and only "ON" events are sent from each. The logic between the two forunately do not conflict so we can support both without knowing which mode the device is in.
This also allows us to handle the heartbeat functionality that certain sensors have - we simply store the timestamp of the heartbeat as an attribute on the sensor device. It defaults to Unknown on bootup if and only if the device supports heartbeats, due to the presence of subnode 4.
* Parse the binary sensor device class from the ISY's device "type"
Now we automatically know which sensors are moisture, motion, and openings! (We also reverse the moisture sensor state, because Insteon reports ON for dry on the primary node.)
* Code review tweaks
The one material change here is that the event subscribers were moved to the `async_added_to_hass` method, as the handlers depend on things that only exist after the entity has been added.
* Handle cases where a sensor's state is unknown
When the ISY first boots up, if a battery-powered sensor has not reported in yet (due to heartbeat or a change in state), the state is unknown until it does.
* Clean up from code review
Fix coroutine await, remove unnecessary exception check, and return None when state is unknown
* Unknown value from PyISY is now -inf rather than -1
* Move heartbeat handling to a separate sensor
Now all heartbeat-compatible sensors will have a separate `binary_sensor` device that represents the battery state (on = dead)
* Add support for Unknown state, which is being added in next PyISY
PyISY will report unknown states as the number "-inf". This is implemented in the base ISY994 component, but subcomponents that override the `state` method needed some extra logic to handle it as well.
* Change a couple try blocks to explicit None checks
* Bump PyISY to 1.1.0, now that it has been published!
* Remove -inf checking from base component
The implementation of the -inf checking was improved in another branch which has been merged in to this branch already.
* Restrict negative-node and heartbeat support to known compatible types
Not all Insteon sensors use the same subnode IDs for the same things, so we need to use different logic depending on device type. Negative node and heartbeat support is now only used for leak sensors and open/close sensors.
* Use new style string formatting
* Add binary sensor detection for pre-5.x firmware
Meant to do this originally; writing documentation revealed that this requirement was missed!
* Add Canary component
* Made some change to how canary data is updated and stored
* Updated to use py-canary:0.1.2
* Addressed flake8 warnings
* Import canary API locally
* Import canary API locally again
* Addressed pylint errors
* Updated requirements_all.txt
* Fixed incorrect unit of measurement for air quality sensor
* Added tests for Canary component and sensors
* Updated canary component to handle exception better when initializing
* Fixed tests
* Fixed tests again
* Addressed review comments
* Fixed houndci error
* Addressed comment about camera force update
* Addressed comment regarding timeout when fetching camera image
* Updated to use py-canary==0.2.2
* Increased update frequency to 30 seconds
* Added support for Canary alarm control panel
* Address review comments
* Fixed houndci error
* Fixed lint errors
* Updated test to only test setup component / platform
* Fixed flake error
* Fixed failing test
* Uptake py-canary:0.2.3
* canary.alarm_control_panel DISARM is now mapped to canary PRIVACY mode
* Fixed failing tests
* Removed unnecessary methods
* Removed polling in canary camera component and update camera info when getting camera image
* Added more tests to cover Canary sensors
* Address review comments
* Addressed review comment in tests
* Fixed pylint errors
* Excluded canary alarm_control_panel and camera from coverage calculation
* add ads hub, light and switch
* add binary sensor prototype
* switch: use adsvar for connection
* fix some issues with binary sensor
* fix binary sensor
* fix all platforms
* use latest pyads
* fixed error with multiple binary sensors
* add sensor
* add ads sensor
* clean up after shutdown
* ads component with platforms switch, binary_sensor, light, sensor
add locking
poll sensors at startup
update state of ads switch and light
update ads requirements
remove update() from constructors on ads platforms
omit ads coverage
ads catch read error when polling
* add ads service
* add default settings for use_notify and poll_interval
* fix too long line
* Fix style issues
* no pydocstyle errors
* Send and receive native brightness data to ADS device to prevent issues with math.floor reducing brightness -1 at every switch
* Enable non dimmable lights
* remove setting of self._state in switch
* remove polling
* Revert "remove polling"
This reverts commit 7da420f823.
* add service schema, add links to documentation
* fix naming, cleanup
* re-remove polling
* use async_added_to_hass for setup of callbacks
* fix comment.
* add callbacks for changed values
* use async_add_job for creating device notifications
* set should_poll to False for all platforms
* change should_poll to property
* add service description to services.yaml
* add for brigthness not being None
* put ads component in package
* Remove whitespace
* omit ads package
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* sensor.envirophat: add missing requirement (#7451)
Adding requirements that is not explicitly pulled in by the library
that manages the Enviro pHAT.
* PyPI Openzwave (#7415)
* Remove default zwave config path
PYOZW now has much more comprehensive default handling for the config
path (in src-lib/libopenzwave/libopenzwave.pyx:getConfig()). It looks in
the same place we were looking, plus _many_ more. It will certainly do a
much better job of finding the config files than we will (and will be
updated as the library is changed, so we don't end up chasing it). The
getConfig() method has been there for a while, but was subsntially
improved recently.
This change simply leaves the config_path as None if it is not
specified, which will trigger the default handling in PYOZW.
* Install python-openzwave from PyPI
As of version 0.4, python-openzwave supports installation from PyPI,
which means we can use our 'normal' dependency management tooling to
install it. Yay.
This uses the default 'embed' build (which goes and downloads
statically sources to avoid having to compile anything locally). Check
out the python-openzwave readme for more details.
* Add python-openzwave deps to .travis.yml
Python OpenZwave require the libudev headers to build. This adds the
libudev-dev package to Travis runs via the 'apt' addon for Travis.
Thanks to @MartinHjelmare for this fix.
* Update docker build for PyPI openzwave
Now that PYOZW can be install from PyPI, the docker image build process
can be simplified to remove the explicit compilation of PYOZW.
* Add datadog component (#7158)
* Add datadog component
* Improve test_invalid_config datadog test
* Use assert_setup_component for test setup
* Fix object type for default KNX port
#7429 describes a TypeError that is raised if the port is omitted in the config for the KNX component (integer is required (got type str)). This commit changes the default port from a string to an integer. I expect this will resolve that issue...
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Added support for extracting JSON attributes from RESTful values
Setting the json_attributes configuration option to true on the
RESTful sensor will cause the result of the REST request to be parsed
as a JSON string and if successful the resulting dictionary will be
used for the attributes of the sensor.
* Added requirement that RESTful JSON results used as attributes must be
objects, not lists.
* Expanded test coverage to test REFTful JSON attributes with and
without a value template.
* Fixed breaks cause by manual upstream merge.
* Added one extra blank line to make PyLint happy.
* Switched json_attributes to be a list of keys rather than a boolean.
The value of json_attributes can now be either a comma sepaated list
of key names or a YAML list of key names. Only matching keys in a
retuned JSON dictionary will be mapped to sensor attributes.
Updated test cases to handle json_attributes being a list.
Also fixed two minor issues arrising from manual merge with 0.58 master.
* Added an explicit default value to the json_attributes config entry.
* Removed self.update() from __init__() body.
* Expended unit tests for error cases of json_attributes processing.
* Align quotes
* Refactored WHOIS sensor to resolve assumed key errors
Altered it to now set an attribute key and value only if the attribute
is present in the WHOIS response. This prevents assumed keys (registrar)
from raising a KeyError on WHOIS lookups that don't contain registrar
information (onet.pl, wp.pl, for example).
* Removed non-used self._data
* WHOIS sensor now creates a new local attributes dict and overrides
* Corrected typos, refactored error cases to clear state adn attributes
* Resolved double return and refactored error logging
* Creates a AmcresHub object to protect some private attributes on the logs
* Uses hass.data to pass AmcrestHub to components
* Prefer constants
* Removed serializer since it's using hass.data and simplified camera entity constructor
* small cleanup
Adding another sensor to output the numeber of items in the SABnabd queue. This is an alternative to displaying filesize, just a preference thing, as it is more meaningfull for me the way I use SABnzdb.
Note this is my first time coding on github and I have no idea if I am doing things right, I assume that all I needed to do is add a couple of lines to the sensors available and also another line as to what to extract from the SABnzdb API, in this case I have called the sensor "queue_count" and it gets the value from the noofslots_total which as I understand - each slot is a separate download item.
hope I did this correctly - also I don't have a separate instance of home assistant running for testing so I have no way to test this code (and I don't know how I would switch to the dev channel either). As I said I am a newb!
* Refactored to new global json saving and loading
* Fixed emulated_hue tests
* Removed unnecassary error handling
* Added missing newline
* Remove unused imports
* Fixed linting error
* Moved _load_json wrapper out of the config class
* New sensor viaggiatreno.
I've messed up the previous PR so here it is in a new one.
Should include also all corrections from @pvizeli
* fixes from PR 10522
* fixed import order
* requested changes from MartinHjelmare
* Fix ValueError exception
structure = '>{:c}'.format(data_types[register.get(CONF_DATA_TYPE)][register.get(CONF_COUNT)])
give:
ValueError: Unknown format code 'c' for object of type 'str'
* Minor typo
* Better int types support
* type
* Added optional register order
* Fix white spaces
* Fix line length
* Fix line too long
* Fix trailing whitespace
* Stylistc code fixes
* Update nederlandse_spoorwegen.py
Make departure and arrival platforms available as state attributes
* Update nederlandse_spoorwegen.py
* Update nederlandse_spoorwegen.py
* add JSON processing capabilities
* format fixes
* format fixes
* Fix according to @fabaff comment
* reverting last commit to a more sane approach
* docstring...
* still docstring...
* passed script/lint
* downgrade exception
JSONDecodeError was only introduced in Python3.5
Since we are still supporting 3.4 ValueError is the parent class of
JSONDecodeError
* Simplified URL expiration calculation and fixed refresh method
* Remove support from Ring from StickupCams or floodlight cameras
* Makes lint happy
* Removed unecessary attributes
* Add baudrate option
Baudrate is essential!
* line too long
line too long (82 > 79 characters)
* trailing whitespace
* Rename const
* Fix the missing one
* Initial commit of Vultr components
Have a working Vultr hub and binary sensor which pulls down the
following attributes of your VPS:
- Date created
- Subscription id (server id)
- Cost per month (in US$)
- Operating System installed
- IPv4 address
- label (human readable name)
- region
- number of vcpus
- which storage package chosen
- IPV6 address (if applicable)
- RAM amount
Working next on sensor and then testing / coverage.
* Added Vultr sensor for pending charges and current bandwidth. Refactored binary_sensor and hub too
* Corrected is_on bases
* Added basic tests for Vultr binary & platform
* Updated require files
* Changing test fixture to highlight different cases
* Written basic test for sensor.vultr
* Resolved linting errors and broken test
* Increase test coverage and corrected docs
* Resolved hound issues
* Revert back negative binary test
* Another hound resolve
* Refactoring and adding is switch, moving over to vultr branch
* Made Vultr components more resiliant to invalid configs
* Added negetive test for vultr binary sensor
* Added better testing of vultr sensor
* Resolved vultr platform test affecting subsequent vultr tests
* Moving VULTR components to single use design
* Added in sensor name config
* Added missing sensors var
* Resolved init data setting of sensors, added in name conf to switch
* Made the Vultr component more resiliant to startup failure with better alerting
* Various Vultr component changes
- Refactored sensor, binary_sensor, and switch to reference one subscription
- Renamed CURRENT_BANDWIDTH_GB monitored condition to CURRENT_BANDWIDTH_USED
- Improved test coverage
* Resolved local tox linting issue
* Added more testing for Vultr switch
* Improved test coverage for Vultr components
* Made PR comment changes to vultr binary sensor
* Made PR comment changes to Vultr sensor
* resolved PR comments for Vultr Switch
* Resolved vultr sensor name and improved tests
* Improved Vultr switch testing (default name formatting)
* Removed vultr hub failure checking
* Refactor Neato botvac components as a vacuum
A switch is still use to enable/disable the schedule
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* CI Hound fixes
* Fix lint errors
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* [Neato vacumm] Add sensor attributes to vacuum
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Remove line breaks and fix docstring
* PR fixes
* Add sensor platform for luftdaten.info
* Add monitored conditions to platform schema
* Make monitored conditions config obligatory
* Improve inline documentation
* Import first standard libs then 3rd party libs
* Combine resource url using format
* Remove unnecessary try..except block
* Use state “None” instead of STATE_UNKNOWN
* Minor changes incl. removal of unused vars
* Add missing spaces
* Add unit test for hddtemp sensor.
* Remove sample fixture and include it in the code.
* Add test to raise coverage.
* Fix bug when host is not reachable.
* Minor code cleanups.
* More code cleanups.
* Add Nederlandse Spoorwegen sensor
* Remove unused 'delay' option.
* Apply requested code reviewed changes
- use constants from const.py
- ensure the configuration is a list
- verify credentials upon platform setup
- verify station input
- add True as second param to add_device
- only call add_device if at least 1 sensor was setup
* Add support for different display currencies in CoinMarkerCap sensor.
* Add test for CoinMarketCap sensor.
* Add test dependency to gen_requirements_all.
* Fix review comments: use string formatting and less string case chanes.
* Fix: Last Played Media Title in plex would stay even when player was idle/off
Primary Fix is in the "if self._device" portion.
code in "if self._session" is a catch all but i'm not 100% if it is needed.
* Fixed lint issues with previous commit
* 1st Pass at refactoring plex refresh
Moved _media** into clearMedia() which is called in _init_ and
at start of refresh.
Removed redunant _media_* = None entries
Grouped TV Show and Music under single if rather than testing
seperately for now.
* Fixed invalid name for _clearMedia()
Removed another media_* = None entry
* Removed print() statements used for debug
* Removed unneeded "if" statement
* Changes
* Updated Requests to 2.18.4
* Updated plexapi to 3.0.3
* Removed function to convert_NA_to_None
* Removed function get_thumb_url
Type changes
* _session.player is now a list players
* na_type deprecated and to be removed
* plexapi has change na to None
Known Issues:
* Player controls currently broken
* Last location (library) stays while player idle
* Username is now Usernames and a list
* Fix for broken controls
* Removed errant print statement
* Removed depecrated na_type
* Updated Plex Sensor to use plexapi 3.0.3
Added support for Token to be used in sensor
Known Issues:
Username and Password broken for Plex Sensor use Token instead for now
* removed TODOs
* Fixes for private access violations
* Removed need for _local_client_fix
* Removed unused import and fixed parens
* Init commit of new whois sensor
* Updated requirements
* Resolved updated showing expired, added expired attr
* Added missing attribute in init, added whois to coveragerc
* Various PR comment changes
- Now more resiliant to invalid hostnames
- Removed various assumed STATE_UNKOWN setting
- Upfront check for valid hostname preventing the sensor starting with dud
- Resolved unit of measurement Day, Days, None issue
- Datetime formatting now done to iso 8601 standard
- Removed all expired usage, not really that useful
- Unused hass assignment
* More PR comment resolutions
- Resolved the dilemma with hosts / single host per sensor. Now running
single domain per sensor.
- Renamed host(s) to domain
* Moved coveragerc sensor location
* Re-phrased the expiration_date warning
* Resolved assumed updated_date existence
* Resolved missing indent
* Resolved discover_info typo
* Update whois.py
* Initial revision of fail2ban sensor
* Verified working, added tests
* Re-factored code so that log reading isn't called for each sensor
* Lint fixes
* Removed errant reset of last ban, added test to verify bans persist through update
* Removed for loop in read_log and replaced with regex per review request
* Refactored update to use current ban array for last ban state
- also was missing return False in timer for default behavior
* Removed CONF_SCAN_INTERVAL from PLATFORM_SCHEMA.extend
- renamed DEFAULT_SCAN_INTERVAL to SCAN_INTERVAL
* SCAN_INTERVAL changed to timedelta
* Force travis rebuild (last build timed out)
* Using compiled regex now
The default names for the feeds created by the EmonCMS component are
like 'emoncms1_feedid_10', but
- This is the display name. The ID should be lowercase and underscored,
but the display name should be readable. The ID gets derived from it
and comes out formatted correctly.
- EmonCMS lets you assign names to feeds, so it makes sense to use those
if they exist, rather than feed IDs. The ID is pretty meaningless and
basically means you have to override every name to make it readable.
- Including the ID identifying the EmonCMS instance (i.e. the '1') makes
the name clunkier and would only be useful for people with multiple
EmonCMS instances, which is likely to be an extremely small group since
one hub can run as many feeds as you need it to.
This changes the default behavior but still uses configured 'name' if
it's set, so it won't break the configuration of people who have
customized their feed names in HA config.
* Add support for multiple disks.
* Fix LINT error.
* Make disk config optional to not break existing installations.
* Change state handling as per request by @fabaff.
* Extended Ring DoorBell to support camera playback and wifi sensors
* Bump python-ringdoorbell to version 0.1.6
* Support to camera playback via ffmpeg
* Extended ringdoorbell sensors to report WiFi attributes
* Extended unittests
* Makes lint happy
* Added support to stickup cameras and fixed logic
* Fixed unittests for stickup cameras
* Makes lint happy
* Refactored attributions and removed extra refresh method.
* Added Toon support again
* Forgot about .coveragerc
* Fixed style issues
* More styling and importing fixes
* Implemented the suggestions made by @pvizeli
* The smallest fix possible
* Removed custom names for Toon states
* Fix last push with 2 outdated lines
* Removed HOME and NOT_HOME, moved to just climate states
* Bumped dependency for better handling of smartplugs that don't report power consumption
* Implemented changes as suggested by @balloob
* Rebase, gen_requirements_all.py finally working
I noticed the steam component "game" attribute is capitalized. This should be lowercase if I'm not mistaken.
From:
return {'Game': self._game}
To:
return {'game': self._game}
Not sure if i'm doing this correctly... apologizes if I'm not!
* Update aioimaplib from v0.7.12 to v0.7.13
Changelog v0.7.13:
[aiolib] adds a connection lost callback [test] imapserver : added APPENDUID response for APPEND cmd [test][fix] imapserver append should add to the connected user mb [test] imapserver : more accurate building of message headers (using python email module)
* run script/gen_requirements_all.py
* Correct capitalization inconsistency in DarkSky
All two-word sensors ("Precip Intensity," "Nearest Storm Bearing," etc) in Darksky uses title case for the friendly name of the sensor, with the exception of "Dew point."
* Implement UV Index in Darksky
* Fixed whitespace for Tox compliance
* Add unit for UV Index.
Per recommendation of reviewer, added 'UV Index' as a CONST in const.py, then used that const in both DarkSky and ISY994. It looks like BloomSky might also support UV Index and it should probably be standardized.
* Added uptime sensor for homeassistant
* Fixed pylint and flake8 errors
* Made requested changes from PR
- Fixed stale docstrings
- Changed default state to None
- Added ability for user to use hours or days
* Fixed typo
* Added unit_of_measurement check to test
* Converted to async
- Changed tests to work with async
* Minor updates
* Initializing statistics sensor with data from database
* fixed broken test case
* usage of recorder component is now optional, thx to @andrey-git
* added test case for initialize_from_database
* New Skybell platform with components
* Added skybell components to omit.
* Preemptively fixing lint issues (hopefully).
* Removed unused variable.
* Requested changes.
* Additional CRs
* Hopefully the last of the CR's!
* Introduced support to Travis CI
* Added Last Build Started sensor and simplified code
* Fixed logic error
* Simplified _LOGGER.debug statement
* Introduced support to Travis CI
* Added Last Build Started sensor and simplified code
* Fixed logic error
* Simplified _LOGGER.debug statement
* Renamed parameter since the repository_names expects a list
* Refactoring code to synchronous
* Simplified variables names
* Update to 0.12.1 and sensor implementation.
* Removing unnecessary dict gets.
* Added name property to actually use the _name variable.
* Update docstring
* Allow configuring DSMR5 protocol.
* Give good example.
* Using dev branch until released upstream.
* Update to dsmr_parser supporting v5 arguments.
* Update to latest dmsr parser, preventing exceptions thrown where warnings would suffice.
* Update even more
* Update requirements.
* Update requirements
* Introducing support to Melnor RainCloud sprinkler systems
* Make monitored_conditions optional for sub-components
* Part 1/2 - Modified attributes, added DATA_ constant and using battery helper
* Part 2/2 - Refactored self-update hub
* Fixed change requested:
- Dispatcher signal connection
- Don't send raincloud object via dispatcher_send()
- Honoring the dynamic scan_interval value on track_time_interval()
* Inherents async_added_to_hass() on all device classes
* Makes lint happy
* * Refactored RainCloud code to incorporate suggestions.
Many thanks to @pvizelli and @martinhjelmare!!
* Removed Entity from RainCloud sensor and fixed docstrings
* Update raincloud.py
* Update raincloud.py
* fix lint
* IMAP Unread sensor updated for async and push
* Implement renames suggested in review
* Use async_timeout
* Keep push capability in a variable
* Reword for Hound
* Increase Comed timeout since it sometimes takes a long time for the API to respond
* Rewrite ComEd sensor to use asyncio
* Fix whitespace and build issues
* new geo rss events sensor
* SCAN_INTERVAL instead of DEFAULT_SCAN_INTERVAL
* removed redefinition CONF_SCAN_INTERVAL
* definition of self._name not required
* removed unnecessary check and unnecessary parameter
* changed log levels
* fixed default name not used
* streamlined sensor name and entity id generation, removed unnecessary parameter
* fixed issue for entries without geometry data
* fixed tests after code changes
* simplified code
* simplified code; removed unnecessary imports
* fixed invalid variable name
* shorter sensor name and in turn entity id
* increasing test coverage for previously untested code
* fixed indentation and variable usage
* simplified test code
* merged two similar tests
* fixed an issue if no data could be fetched from external service; added test case for this case
kennedyshead
JC Connell
Robin
ChristianKuehnel
Otto Winter
Russell Cloran
Henrik Nicolaisen
mjj4791
Daniel Høyer Iversen
Paulus Schoutsen
Diogo Gomes
Aaron Bach
Julius Mittenzwei
Kane610
Fabian Affolter
Johann Kellerman
citruz
Rene Nulsch
happyleavesaoc
Mike O'Driscoll
Dougal Matthews
NovapaX
Jerad Meisner
David K
Anton Lundin
David
Sergey Isachenko
Anders Melchiorsen
akloeckner
nordlead2005
Timmo
Philip Kleimeyer
Ville Skyttä
Otto Winter
Joe Lu
Kevin Goff
MGWGIT
Nolan Gilley
arcsur
Johannes Innerbichler
lich
Paul Annekov
Sean Dague
Jens Østergaard Nielsen
Andrey
Jean-Philippe Jodoin
markferry
Ioan Loosley
Matthias Dötsch
Alok Saboo
Åskar Andersson
Heiko Thiery
covrig
Josh Anderson
Sean Wilson
timstanley1985
Julian Kahnert
Thibault Cohen
Frantz
Ryan McLean
tomaszduda23
Dan Nixon
NotoriousBDG
Thom Troy
Gregory Benner
awkwardDuck
Greg Laabs
Jordy
Frank Wickström
Thibault Maekelbergh
PhracturedBlue
Mike Megally
Michael Pollett
Erik Eriksson
Andrey Kupreychik
Alan Fischer
Roman
Stefan Lehmann
Nicolas Bougues
Nicko van Someren
Adam Cooper
Pascal Vizeli
Daniel Perna
Rasmus
Milan V
Marcelo Moreira de Mello
cgtobi
Rendili
Lewis Juggins
Sven-Hendrik Haase
bigwoof
Markus Nigbur
Egor Tsinko
Fabrizio Furnari
ziotibia81
Jeremy Williams
On Freund
Hmmbob
Hugo Dupras
Markus
lichtteil
Greg. A
Menno Blom
Richard Leurs
Hydreliox
Trevor
pezinek
arsaboo
Fabian Affolter
Tobias Sauerwein
Kevin Fronczak
Maciej Bieniek
Klaas Hoekema
Martin Eberhardt
boltgolt
Derek
PeteBa
TopdRob
mclem
Russell Cloran
Eugenio Panadero
Ryan Bahm
Mister Wil
bestlibre
Johan Bloemberg
Vignesh Venkat
Gabor SZOLLOSI
joe248
Enrique Gonzalez
Malte Franken
Tom Matheussen
Michael Prokop