* Add Time of Flight Sensor using VL53L1X
* Fix issues found by bot
* Fix issues from bot
* Remove extra logs
* Keep removing logs dependencies not used
* Remove log from update
* Add logger info to async_update
* Fix over-indented line
* Fix pylint error
* Remove logger reporting successful operation
* Update requirements
* Update requirements_all.txt
* Update requirements_test_all.txt
* Used isort to keep imports and added STMicroelectronics to docstring
* Replace time.sleep by asyncio.sleep
* Add requirements to COMMENT_REQUIREMENTS and fix typo
* Using async_add_executor_job to schedule the call in the pool
* Fix typo
* Optimize async_update
* Updated requirements files
* Group and schedule calls that should be run sequentially
* Fix lint errors
* Revision showing development history
* Cleaning and typos
* Cleaning and typos
* Fix wrong-import-order
* Fix gen_requirements_all
* Schedule rpi_gpio I/O on the executor thread pool
* Fix partial parameters
* Fix bot error - add blank line
* Fix lint error
* Remove dependencies from requirements
* Review initial commits
* Move all device I/O to async_update
* Update requirements_all.txt
* Revised header with no url to the docs
* Use async_added_to_hass to add and initialize the sensor
* Add docstring to init()
* Move sensor.open() to async_setup_platform
* Remove logging and async
* Fix typo
* Move sensor.open to safe initialization
* Fix typo
* Fix typo
* Add the new tof module to .coveragerc
* Move the sensor platform under a tof package
* Update .coveragerc and requirements_all for tof package
* Fix Name of Accesspoint if name is configured
* fix lint
* Simplyfied naming
* applied suggestion
Co-Authored-By: SukramJ <markus@mm-jankowski.de>
* update comment
* Added updating alarm state after start of the HA. Still rough and dirty.
* Fixed initialization of the panel and binary sensor. Before cleanup.
* Added alarm clearing, linting fixes.
* Removed dead code, added style changes.
* Updated requirements
* Fixed linting errors.
* Fixed linting errors
* Fixed linter errors.
* Fixed hopefully last linter errors.
* Fixes after code review, imports sorted.
* Removed init debugging
* Start preparing for homekit_controller config entries
* Review feedback
* Review feedback
* Only use the vol.strip validator for pairing_code
* CV not required now
* Changes from review
* Changes after review
The REST notification component only allows 200 + 201 as a successful
response code to the submission. notify.me returns a 202 (Accepted)
response, which works fine but gets logged as a warning in the log.
Update the allowed statuses to treat the 202 as ok.
* Serialize snapshot commands and bump amcrest package to 1.2.4
Attempting to send a snapshot command when a previous one hasn't finished will result in warnings and/or errors. This can happen when the camera picture is clicked on in the frontend, resulting in the thread that updates the thumbnail in the background every 10 seconds to sometimes collide with the thread that updates the large picture in the foreground quickly. An automation that calls the camera.snapshot service in yet another thread can make the situation worse. Fix by adding a thread lock to serialize snapshot commands. Also bump the amcrest package to 1.2.4 which fixes error handling in the command method and improves performance by reusing requests sessions.
* Update amcrest package to 1.2.4
* Add SmartThingsAccelCluster to binary_sensor
* Make corrections per discussion with @dmulcahey
* Add missing const to gateway.py
* Remove Acceleration from no sensor
* mvp basic temperature sensor support
* support for DHT temperature & humidity
* add support for ds18b20 sensors
* improve resolution of device settings
* update requirements_all.txt
* re-organize new file
* don't use filter(lambda: syntax
* set unique_id on entities to allow renaming in the UI
* leverage base Entity module to do C to F conversion
* add option for setting poll_interval
* use handler pattern to handle updates from Konnected device
* cleanups from code review
* node descriptor implementation
add info to device info
disable pylint rule
check for success
* review comments
* send manufacturer code for get attr value for mfg clusters
* ST report configs
* do zdo task first
* add guard
* use faster reporting config
* disable false positive pylint
* fix derived rate, fixes#20097
* fix derived rate, fixes#20097
* Fix typo
thnx @amelchio
* Make the test more realistic
Took values from my own smart meter for the test
* Update test to ignore rounding issues
* climate/netatmo: Added support for muletiple thermostats/valves
* Adjusted the update interval throttle to 10 seconds
* Avoid returning 'homes' without 'therm_schedules'
* Requires home to have 'modules' as well as 'therm_schedules'; Using pyatmo 1.7
* Support multiple homes
* Fix nest level too deep issue
* Fix crashing bug when discovery is true
* Fix crashing bug when discovery is true
* Modifications according to review comments
* Resolve format issue
* Fix mode name issue
* Revisions according to review's suggestions
* Revisions according to review's comments
* Revisions according to review's comments
* Update requirements
Updated requirements
* Small bump for aioharmony
Small version bump increase for aioharmony
* Add attributes
Add firmware and config version attributes
* Add hold for button press on send_command
* Fix requirements file
For some reason aioharmony ended up in there as a duplicate. Fixed it.
* Revert rebase changes
Revert some changes that should have been reverted back as part of rebase.
* Updated based on review
Removed HOLD_SECS from platform schema (configuration)
Updated getting kwargs in async_send_command
Updated debug log to include delay_secs
* do not report on 0x1000 LightLink cluster
* don't flood Zigbee network during configuration or initialization
* add lifeline of 60 minutes to lights
* use ootb polling
* Change dependency to pyvesync-v2 for vesync switch
* Update requirements_all.txt
* Update Version - Wall Switch Support
Update required version for vesync outlets and switches. Eliminate API call for energy usage for wall switches that do not have that feature
* fix name convention
* Initial pass of a mobile_app component
* Fully support encryption, validation for the webhook payloads, and other general improvements
* Return same format as original API calls
* Minor encryption fixes, logging improvements
* Migrate Owntracks to use the superior PyNaCl instead of libnacl, mark it as a requirement in mobile_app
* Add mobile_app to .coveragerc
* Dont manually b64decode on OT
* Initial requested changes
* Round two of fixes
* Initial mobile_app tests
* Dont allow making registration requests for same/existing device
* Test formatting fixes
* Add mobile_app to default_config
* Add some more keys allowed in registration payloads
* Add support for getting a single device, updating a device, getting all devices. Also change from /api/mobile_app/register to /api/mobile_app/devices
* Change device_id to fingerprint
* Next round of changes
* Add keyword args and pass context on all relevant calls
* Remove SingleDeviceView in favor of webhook type to update registration
* Only allow some properties to be updated on registrations, rename integration_data to app_data
* Add call service test, ensure events actually fire, only run the encryption tests if sodium is installed
* pylint
* Fix OwnTracks test
* Fix iteration of devices and remove device_for_webhook_id
* Add support for separate on/off ids on manual configured IHC lights.
This makes it easier to support IHC code units thats relies on being
turned on and off through specific inputs.
Also adds a pulse service (ihc.pulse) that supports sending a short on/off pulse to an IHC input.
* Fix
* Lint fix
* Add on/off id support in switch
* Make pulse async
* Code review fixes
* Added value_template config for parsing json value from state topic
Added arm_code_required to avoid code enter when arming
* Renamed config parameter to code_arm_required
* Fix for discovery update compatibility
* Fixed lint error
* Added test
* Register 'media_player.firetv_adb_cmd' service
* Wrap the 'firetv_adb_cmd' service with 'adb_decorator'
* Address reviewer comments
* Move firetv to its own platform
* Move 'adb_command' service description
* Rename DOMAIN to FIRETV_DOMAIN
* Import KEYS in __init__ method
* Change 'self.KEYS' to 'self.keys'
* Update firetv in .coveragerc
* 'homeassistant.components.media_player.firetv' -> 'homeassistant.components.firetv'
* 'homeassistant.components.firetv' -> 'homeassistant.components.firetv.media_player'
* add device_info to device
* added checks
* Fixes based on feedback
* Fix spelling
* Simplified implementation
On homematicip devices and the ap are created
* small fix with device.id
* hub/ap device creation moved to __init__.py
* Fixed result handling
* fixes after review.
* Fix test
* Refactor async_turn_on() for ZHA Light.
Use "move_to_level_with_on_off" if brightness or transition attributes
are present in the service call data, otherwise issue "On" Zigbee
command.
Allow brightness of 0 for service call -- effectively turning the light
off.
Send color commands only after the light was turned on.
* Fix zha.light tests.
* Fix HomeKit missing humidity issue
When using HomeKit components, MiTemp BT's humidity state will not display in Home.app.
After Added home-assistant device class into property, this problem is solved.
* Add Device_Class_Battery to property
* Break long lines.
* Lint
* Add the destination stations to the attributes
* Add support for showing station on map
* Add option to exclude via connections
* Cleanup the live sensor
* Perform better checking against false i/o None values
* Add support for excluding vias
* Add more details for via trains
* Lint file
* Update logger level
* 🚜 Rewrite of Toon component
* 🔥 Removed manual state from list
* 👕 Addresses code review comments
* 🔥 Removes a log line that should not have been left behind
* 👕 Addresses linting warnings
* 👕 Addresses Hound CI warning
* 👕 Fixes small code styling issues
* ✨ Sets an appropriate SCAN_INTERVAL
* ✨ Sets min/max temperature for climate platform
* 👕 Makes imports more consistent with codebase
* 🚑 Fixes incorrect SCAN_INTERVAL value in climate platform
* 🚑 Uses OrderedDict for config_flow schema
* 👕 Adds return types for min/max temp
* 🚜 Refactors entities into their actual devices
* ⬆️ Updates toonapilib to 3.0.7
* 🚜 Refactors binary sensor state inversion
* 🚑 Fixes states of OpenTherm connection and Hot Tap Water
* ✨ Adds Boiler Preheat binary sensor
* ✨ Adds Toon Thermostat Program binary sensor
* ✨ Adds Boiler Modulation Level sensor
* ✨ Adds Daily Power Cost sensor
* 🔥 Cleanup of Toon Thermostat climate attributes
* 🚜 Adjusts config_flow with Tenant selection
* 🙋 Adds myself to codeowners file as maintainer
* ⬆️ Gen requirements
* ⬆️ Updates toonapilib to 3.0.9
* ☔ Adds config_flow tests
* Add additional device classes to Cover component; Add SmartThings cover platform; Improve lock test coverage
* Enhance cover platform to support position and battery level reporting.
* Add additional classes
* Removed device class descriptions
* Updates based on review feedback
* Add test case for closed
* Bump firetv to 1.0.8
* Update the 'update' function for Fire TV
* Return None for properties when unavailable
* Remove 'self.adb_lock' attribute
* Remove threading import
* Update configuration for Fire TV component
* Clarify 'python-adb' vs. 'pure-python-adb'
* Rename '__adb_decorator' to '_adb_exception_catcher'
* Don't check 'self._available' in properties
* Bump firetv to 1.0.9
* Switch to SCAN_INTERVAL instead of throttle
This allows forced update of state
* Don't change tv on/off state in services
* Drop unused variables
* Only send mute if different from current state
* No need to update variables, will behandled on update
* Drop unused import
The Velux ACTIVE gateway uses `C#` rather than `c#` as the name of
the property that holds the count of accessories. Apple's HomeKit docs
suggest that properties should be case-insensitive, so update the
code to not assume the property names are lower case.
* Generate new sensors for discogs:
- Generate collection sensor
- Generate wantlist sensor
- Generate random record sensor
- Removes the option to set a name
* Make it so name can still be configured
* Fix invalid syntax
* Use shared data object + 1 sensor
* Linting
* Remove straying comment
* Dont use async for non-async stuff
* Don't use separate list for conf already in dict
* Use consts for keys
* Copy dict to list for sensors
* Fix syntax for computed keys in SENSORS dict
* Adding custom and zone cleaning to Neato Vacuums
* Fixing line length and missing imports
* Line too long
* Adding details to the custom service
* Fix linting issues
* Reverting ACTION
* Code cleanup
* Typo
* Requested modifications
* Changing the custom service domain
* No service schema depency anymore
* Removing useless code
* Linting
* Requested changes
* Requested changes for domain
* Revert the service domain back to vacuum
* Move iperf3 sensor to a standalone component
* Split out iperf3 into a component with a sensor platform
* Update coverage and requirements
* Add services.yaml
* Clean up a little bit
* Lint
* Lint
* * bump pip module version.
* moved named tuple into the module.
* pass SSL bool into the object init.
* support get_extra_attributes
* Update homeassistant/components/device_tracker/luci.py
* Allow the utility_meter to net meter rather than only allow increases.
* Fix PR issues around CI.
* Fix line length fallout.
* Change rollover to net_consumption. Add unit tests.
* Fix test style issues.
* Fix style in tests.
Jose Motta Lopes
Jason Hu
David Thulke
William Scanlon
Sebastian Muszynski
Marvin Wichmann
Leonardo Merza
Daniel Shokouhi
zewelor
Markus Jankowski
c-soft
Sergio Oller
Jc2k
Phil Bruckner
Franck Nijhof
Diogo Gomes
Fredrik Erlandsson
Alan Tse
Penny Wood
Paulus Schoutsen
Paulus Schoutsen
Jonathan McDowell
Nick Whyte
Steven Looman
carstenschroeder
Colby Rome
ktnrg45
roblandry
Daniel Høyer Iversen
Alok Saboo
Nate Clark
Gijs Reichert
Fabian Affolter
David F. Mulcahey
shanbs
Aaron Bach
Willem Burgers
srirams
Jeff Irion
kennedyshead
Andrew Sayre
Anders Melchiorsen
Maikel Punie
Matt White
Rohan Kapoor
ehendrix23
Daniel Perna
Joe Trabulsy
Kevin Fronczak
emontnemery
Robbie Trencheny
Wagner Sartori Junior
damarco
msvinth
cpopp
Ben Randall
Marco M
Victor Vostrikov
koolsb
Adam Dullage
CV
Robert Svensson
Alexei Chetroi
Tomas Hellström
Kevin Tuhumury
Petro31
dfournie
blackray12
Thibault Maekelbergh
Mattias Welponer
René-Marc Simard
Patrick T.C
Otto Winter
Giorgos Logiotatidis
Johann Kellerman
koreth
Joakim Plate
Baptiste Lecocq
Hmmbob
Andre Lengwenus
Tony763
Teemu R
Alistair Galbraith
Jérôme W
Martin Hjelmare
yosilevy
Richard Mitchell
Finbarr Brady
Benny de Leeuw
tmechen
Justin Bassett
siberx