cec3b57390
Fix thermostats that do not support off under homekit ( #33809 )
...
TargetHeatingCoolingState: value=0 is an invalid value.
would be raised when a thermostat did not support
off.
2020-04-08 11:56:11 -07:00
46bbe816f6
Remove None from dict.get(key, None) ( #33794 )
2020-04-07 21:06:05 +02:00
cf563df42a
Bump HAP-python to 2.8.1 ( #33756 )
2020-04-06 23:30:10 +02:00
171c1b20f7
Remap homekit auto to home assistant heat_cool ( #33701 )
...
Home Assistant auto mode is described as
"The device is set to a schedule, learned behavior, AI."
HomeKit Accessory Protocol expects "heating or cooling to maintain
temperature within the heating and cooling threshold of the
target temperature"
Since HomeKit is expecting to set temperatures in this mode,
mapping homekit state 3 ("Auto") to Home Assistant HVAC_MODE_HEAT_COOL
is more inline with how Home Assistant defines HVAC_MODE_HEAT_COOL
as "The device supports heating/cooling to a range"
2020-04-05 15:54:57 -05:00
b855177fe6
Make homekit aware of STATE_STANDBY ( #33679 )
2020-04-05 08:47:44 -05:00
de317fb2f6
Map dry and fan only states for homekit thermostats ( #33682 )
...
Homekit only has Off/Heat/Cool/Auto at this time, but
at least we can prevent the device from erroring
by mapping dry and fan to cool so it continues
to function.
2020-04-05 08:47:32 -05:00
7653dc947a
Enable pylint unnecessary-pass ( #33650 )
...
* Enable pylint unnecessary-pass
* Process review suggestions
* Fix smhi tests
2020-04-05 10:33:07 +02:00
000ad256fb
Handle float values for homekit lightning ( #33683 )
...
* Handle float values for homekit lightning
* Empty commit to rerun CI
2020-04-04 23:21:44 -07:00
f1d3c0d19b
Remove unused manifest fields ( #33595 )
2020-04-03 12:58:19 -07:00
f25321e010
Use homekit service callbacks for lights to resolve out of sync states ( #32348 )
...
* Switch homekit lights to use service callbacks
Service callbacks allow us to get the on/off, brightness, etc
all in one call so we remove all the complexity that was
previously needed to handle the out of sync states
We now get the on event and brightness event at the same time
which allows us to prevent lights from flashing up to 100%
before the requested brightness.
* Fix STATE_OFF -> STATE_ON,brightness:0
2020-04-02 20:06:13 -05:00
36a606f81d
Bump HAP-python to 2.8.0 ( #33539 )
2020-04-02 23:09:35 +02:00
6cafc9aaef
Add humidity support to homekit thermostats ( #33367 )
2020-03-31 11:45:33 -07:00
6208d8c911
Add HomeKit support for slat tilting ( #33388 )
...
* Add HomeKit support for slat tilting
* Reset tilt-specific attribute, not position attribute
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add explanation why we fix HomeKit's targets
We have to assume that the device has worse precision than HomeKit. If it
reports back a state that is only _close_ to HK's requested state, we'll
"fix" what HomeKit requested so that it won't appear out of sync.
Co-authored-by: J. Nick Koston <nick@koston.org>
2020-03-30 19:47:03 -05:00
369ffe2288
Fix setting HomeKit temperatures with imperial units ( #33315 )
...
In PR#24804 the step size was changed to match the step size
of the device that HomeKit is controlling. Since HomeKit
is always working in TEMP_CELSIUS and the step size is based on
the Home Assistant units setting, we were mixing data with different
units of measure when Home Assistant was using imperial units.
This regression presented the symptom that setting the
temperature to 73F would result in 74F. Other values are affected
where the math doesn't happen to work out.
HomeKit currently has a default of 0.1 in the spec and the override
of this value has been removed.
2020-03-27 21:02:51 -07:00
f1a0ca7cd3
Add and use percentage constant ( #32094 )
...
* Add and use percentage constant
* Fix pylint error and broken test
2020-02-28 11:46:48 -08:00
157f972d72
Use f-strings in integrations starting with "H" - "L" ( #32265 )
...
* Use f-strings in integrations starting with "H"
* Use f-strings in integrations starting with "I"
* Use f-strings in integrations starting with "J"
* Use f-strings in integrations starting with "K"
* Use f-strings in integrations starting with "L"
* Fix lint error
* Use join instead of f-string in homekit_controller
* Use local variables with f-strings
* Fix lint error
* Escape the characters in f-string
* Sort imports with isort in homeworks light
* Fix pylint error
* Fix broken tests
* Fix broken tests v2
2020-02-28 12:39:29 +01:00
df7d2b3aeb
Fix typos found by codespell ( #31243 )
...
* Fix typos found by codespell
* Fix typos found by codespell
* codespell: Furture ==> Future
* Update test_config_flow.py
* Update __init__.py
* Spellcheck: successfull ==> successful
* Codespell: unsuccesful ==> unsuccessful
* Codespell: cant ==> can't
* Codespell: firware ==> firmware
* Codespell: mimick ==> mimic
2020-01-31 08:33:00 -08:00
6be9a45333
Upgrade HAP-python to 2.7.0 ( #31201 )
2020-01-27 11:42:09 +01:00
894b841a15
Fix HomeKit window covering to support float numbers in the position ( #31081 )
...
* Fix HomeKit window covering to support float numbers in the position
* Fix HomeKit window covering to cast current position to an integer value
2020-01-23 09:02:44 -08:00
6b49bea6c4
Fix HomeKit behavior with lights supporting color and temperature ( #30756 )
2020-01-14 07:09:35 -08:00
345cc244ed
Correct names in manifests (C-L) ( #30532 )
2020-01-07 08:19:17 +01:00
a84741392b
Format all manifests with prettier ( #30521 )
2020-01-06 21:28:23 +01:00
5216477353
Be consistent with Home Assistant and Hass.io spelling ( #30500 )
...
* Be consistent with Home Assistant spelling
* Be consistent with Hass.io spelling
2020-01-05 14:09:17 +02:00
df6c7b97f5
isort homekit ( #30437 )
2020-01-03 15:00:44 +00:00
859935e8bc
Update HomeKit position state characteristic for covers ( #27867 )
...
* HomeKit: update position state characteristic for covers
position state is a mandatory characteristic for HK window coverings
* Test position state characteristic
2020-01-03 08:19:03 -05:00
e6388e186c
Remove unnecessary string literal concatenations ( #30360 )
2020-01-02 21:17:10 +02:00
251808874f
Move imports into setup function in homekit __init__.py ( #30137 )
2019-12-22 10:23:44 +01:00
92fd3e3ad5
Fix homekit handling of 0 light brightness and fan speed ( #29962 )
...
* Fix homekit handling of 0 light brightness and fan speed
* Update homekit tests for new initial brightness/speed value
2019-12-20 11:00:21 +01:00
72f336a2dd
Move imports to top for homekit ( #29560 )
...
* Move imports to top for homekit
* Moved back a couple imports, added annotation to disable import-outside-toplevel
* Fix all tests in test_homekit.py
2019-12-09 16:10:02 +01:00
b731ddabde
Sort imports according to PEP8 for homekit ( #29645 )
2019-12-08 18:16:49 +01:00
c5f4872aea
Limit available heat/cool modes for HomeKit thermostats ( #28586 )
...
* Limit available heat/cool modes for HomeKit thermostats.
The Home app only shows appropriate modes (heat/cool/auto) for the device. Depending on the climate integration, disabling the auto start might be needed.
* Include improved mapping for HVAC modes in tests
2019-12-06 14:07:45 +01:00
c47ed743f1
Fix HomeKit linked battery sensor crash ( #28974 )
...
* fix homekit linked battery sensor crash
* simplified missing linked battery
* fixed formatting
* Make if faster
2019-11-26 08:55:33 -08:00
99c7608fb4
Lint config cleanups ( #28864 )
...
* Remove bunch of unneeded lint exclusions
* Use symbolic names instead of identifiers in pylint disables
* Tighten scope of some pylint disables
2019-11-25 22:40:08 -08:00
d88ca0f5cb
Lint exclusions ( #28655 )
...
* Remove malformed pylint disable markers
* Remove some unused imports
* Remove some unneeded lint exclusions
* Remove more unneeded lint exclusions
* Add specific codes to all noqa's
2019-11-16 10:22:07 +01:00
48660585f1
Add climate device triggers ( #28544 )
...
* Add climate device triggers
* Test capabilities
2019-11-07 16:28:45 +01:00
e3f0c904b0
Add option to specify mDNS advertised IP address for HomeKit Bridge ( #26791 )
...
* Add options to specify advertised IP and MAC for HomeKit Bridge
This makes use of HAP-python's new feature in version 2.6.0
that allows to specify the mDNS advertised IP and MAC address.
This is a requirement for the following use cases:
- Running Home Assistant behind a NAT, e.g. inside Docker.
- Running it on a system with multiple interfaces there
the default IP address, DNS entry and hostname diverge.
The forwarding of the required mDNS packets can be done with
an avahi-daemon based gateway, e.g. by using enable-reflector=yes.
Specifying the MAC address makes it possible to identify an
accessory in case HA is run inside a ephemeral docker container.
Whitespace changes were performed due to black and flake8.
* Update tests for HomeKit Bridge due to IP and MAC advertising
Whitespace changes were performed due to black and flake8.
* Remove the possibility to set the MAC address of the HomeKit Bridge
Since the MAC address is a random device ID, there is no need
for the user to be able to set a custom MAC address value for it.
Whitespace changes were performed due to black and flake8.
2019-10-22 22:06:21 -07:00
c6b08b28b2
Fix homekit temperaturesensor round ( #27047 )
...
* Fix homekit temperature sensor for round with one decimal
* Removing unnecesary operations
* Adapting tests for new temperature_to_homekit() result precision
2019-10-03 17:44:07 -07:00
c7da781efc
Update documentation link URL for integrations in all manifests ( #27114 )
2019-10-02 09:25:44 -07:00
ed21019b7a
Bump HAP-python to 2.6.0 for homekit ( #26783 )
2019-09-21 15:34:08 +02:00
f9edec19ad
Use literal string interpolation in integrations H-J (f-strings) ( #26380 )
2019-09-03 17:27:14 +02:00
4de97abc3a
Black
2019-07-31 12:25:30 -07:00
5e2dfb14fb
Add area support to lock service schemas ( #25435 )
...
* Add area support to lock service schemas
* extend
* Fixed tests
* Fixed tests
2019-07-23 16:05:21 -07:00
c2f4f06005
Add HomeKit Reset Accessory ( #25158 )
...
* added the ability to reset homekit accessories
* added tests for homekit reset accessory
* minor fixes
2019-07-16 03:43:37 +02:00
98ba015f06
Remove myself as codeowner ( #25043 )
2019-07-10 08:36:17 -07:00
84cf76ba36
Climate 1.0 ( #23899 )
...
* Climate 1.0 / part 1/2/3
* fix flake
* Lint
* Update Google Assistant
* ambiclimate to climate 1.0 (#24911 )
* Fix Alexa
* Lint
* Migrate zhong_hong
* Migrate tuya
* Migrate honeywell to new climate schema (#24257 )
* Update one
* Fix model climate v2
* Cleanup p4
* Add comfort hold mode
* Fix old code
* Update homeassistant/components/climate/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/climate/const.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* First renaming
* Rename operation to hvac for paulus
* Rename hold mode to preset mode
* Cleanup & update comments
* Remove on/off
* Fix supported feature count
* Update services
* Update demo
* Fix tests & use current_hvac
* Update comment
* Fix tests & add typing
* Add more typing
* Update modes
* Fix tests
* Cleanup low/high with range
* Update homematic part 1
* Finish homematic
* Fix lint
* fix hm mapping
* Support simple devices
* convert lcn
* migrate oem
* Fix xs1
* update hive
* update mil
* Update toon
* migrate deconz
* cleanup
* update tesla
* Fix lint
* Fix vera
* Migrate zwave
* Migrate velbus
* Cleanup humity feature
* Cleanup
* Migrate wink
* migrate dyson
* Fix current hvac
* Renaming
* Fix lint
* Migrate tfiac
* migrate tado
* Fix PRESET can be None
* apply PR#23913 from dev
* remove EU component, etc.
* remove EU component, etc.
* ready to test now
* de-linted
* some tweaks
* de-lint
* better handling of edge cases
* delint
* fix set_mode typos
* apply PR#23913 from dev
* remove EU component, etc.
* ready to test now
* de-linted
* some tweaks
* de-lint
* better handling of edge cases
* delint
* fix set_mode typos
* delint, move debug code
* away preset now working
* code tidy-up
* code tidy-up 2
* code tidy-up 3
* address issues #18932 , #15063
* address issues #18932 , #15063 - 2/2
* refactor MODE_AUTO to MODE_HEAT_COOL and use F not C
* add low/high to set_temp
* add low/high to set_temp 2
* add low/high to set_temp - delint
* run HA scripts
* port changes from PR #24402
* manual rebase
* manual rebase 2
* delint
* minor change
* remove SUPPORT_HVAC_ACTION
* Migrate radiotherm
* Convert touchline
* Migrate flexit
* Migrate nuheat
* Migrate maxcube
* Fix names maxcube const
* Migrate proliphix
* Migrate heatmiser
* Migrate fritzbox
* Migrate opentherm_gw
* Migrate venstar
* Migrate daikin
* Migrate modbus
* Fix elif
* Migrate Homematic IP Cloud to climate-1.0 (#24913 )
* hmip climate fix
* Update hvac_mode and preset_mode
* fix lint
* Fix lint
* Migrate generic_thermostat
* Migrate incomfort to new climate schema (#24915 )
* initial commit
* Update climate.py
* Migrate eq3btsmart
* Lint
* cleanup PRESET_MANUAL
* Migrate ecobee
* No conditional features
* KNX: Migrate climate component to new climate platform (#24931 )
* Migrate climate component
* Remove unused code
* Corrected line length
* Lint
* Lint
* fix tests
* Fix value
* Migrate geniushub to new climate schema (#24191 )
* Update one
* Fix model climate v2
* Cleanup p4
* Add comfort hold mode
* Fix old code
* Update homeassistant/components/climate/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/climate/const.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* First renaming
* Rename operation to hvac for paulus
* Rename hold mode to preset mode
* Cleanup & update comments
* Remove on/off
* Fix supported feature count
* Update services
* Update demo
* Fix tests & use current_hvac
* Update comment
* Fix tests & add typing
* Add more typing
* Update modes
* Fix tests
* Cleanup low/high with range
* Update homematic part 1
* Finish homematic
* Fix lint
* fix hm mapping
* Support simple devices
* convert lcn
* migrate oem
* Fix xs1
* update hive
* update mil
* Update toon
* migrate deconz
* cleanup
* update tesla
* Fix lint
* Fix vera
* Migrate zwave
* Migrate velbus
* Cleanup humity feature
* Cleanup
* Migrate wink
* migrate dyson
* Fix current hvac
* Renaming
* Fix lint
* Migrate tfiac
* migrate tado
* delinted
* delinted
* use latest client
* clean up mappings
* clean up mappings
* add duration to set_temperature
* add duration to set_temperature
* manual rebase
* tweak
* fix regression
* small fix
* fix rebase mixup
* address comments
* finish refactor
* fix regression
* tweak type hints
* delint
* manual rebase
* WIP: Fixes for honeywell migration to climate-1.0 (#24938 )
* add type hints
* code tidy-up
* Fixes for incomfort migration to climate-1.0 (#24936 )
* delint type hints
* no async unless await
* revert: no async unless await
* revert: no async unless await 2
* delint
* fix typo
* Fix homekit_controller on climate-1.0 (#24948 )
* Fix tests on climate-1.0 branch
* As part of climate-1.0, make state return the heating-cooling.current characteristic
* Fixes from review
* lint
* Fix imports
* Migrate stibel_eltron
* Fix lint
* Migrate coolmaster to climate 1.0 (#24967 )
* Migrate coolmaster to climate 1.0
* fix lint errors
* More lint fixes
* Fix demo to work with UI
* Migrate spider
* Demo update
* Updated frontend to 20190705.0
* Fix boost mode (#24980 )
* Prepare Netatmo for climate 1.0 (#24973 )
* Migration Netatmo
* Address comments
* Update climate.py
* Migrate ephember
* Migrate Sensibo
* Implemented review comments (#24942 )
* Migrate ESPHome
* Migrate MQTT
* Migrate Nest
* Migrate melissa
* Initial/partial migration of ST
* Migrate ST
* Remove Away mode (#24995 )
* Migrate evohome, cache access tokens (#24491 )
* add water_heater, add storage - initial commit
* add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
delint
* Add Broker, Water Heater & Refactor
add missing code
desiderata
* update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
* bugfix - loc_idx may not be 0
more refactor - ensure pure async
more refactoring
appears all r/o attributes are working
tweak precsion, DHW & delint
remove unused code
remove unused code 2
remove unused code, refactor _save_auth_tokens()
* support RoundThermostat
bugfix opmode, switch to util.dt, add until=1h
revert breaking change
* store at_expires as naive UTC
remove debug code
delint
tidy up exception handling
delint
add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
delint
bugfix - loc_idx may not be 0
more refactor - ensure pure async
more refactoring
appears all r/o attributes are working
tweak precsion, DHW & delint
remove unused code
remove unused code 2
remove unused code, refactor _save_auth_tokens()
support RoundThermostat
bugfix opmode, switch to util.dt, add until=1h
revert breaking change
store at_expires as naive UTC
remove debug code
delint
tidy up exception handling
delint
* update CODEOWNERS
* fix regression
* fix requirements
* migrate to climate-1.0
* tweaking
* de-lint
* TCS working? & delint
* tweaking
* TCS code finalised
* remove available() logic
* refactor _switchpoints()
* tidy up switchpoint code
* tweak
* teaking device_state_attributes
* some refactoring
* move PRESET_CUSTOM back to evohome
* move CONF_ACCESS_TOKEN_EXPIRES CONF_REFRESH_TOKEN back to evohome
* refactor SP code and dt conversion
* delinted
* delinted
* remove water_heater
* fix regression
* Migrate homekit
* Cleanup away mode
* Fix tests
* add helpers
* fix tests melissa
* Fix nehueat
* fix zwave
* add more tests
* fix deconz
* Fix climate test emulate_hue
* fix tests
* fix dyson tests
* fix demo with new layout
* fix honeywell
* Switch homekit_controller to use HVAC_MODE_HEAT_COOL instead of HVAC_MODE_AUTO (#25009 )
* Lint
* PyLint
* Pylint
* fix fritzbox tests
* Fix google
* Fix all tests
* Fix lint
* Fix auto for homekit like controler
* Fix lint
* fix lint
2019-07-08 14:00:24 +02:00
69089da88e
Use climate device's target temp step value ( #24804 )
2019-06-27 15:14:23 -07:00
e24d56aa5b
Add HomeKit Television functionality ( #22968 )
2019-05-05 17:51:47 +02:00
db2904624a
Fix low_battery_threshold issue HomeKit ( #23593 )
2019-05-01 16:48:56 +02:00
b4e2a0ef84
Add HomeKit low battery threshold config ( #23363 )
2019-04-30 02:02:53 +02:00
54c34bb224
Display person component as occupancy sensor HomeKit ( #23451 )
2019-04-28 18:38:21 +02:00
2c07bfb9e0
Remove dependencies and requirements ( #23024 )
...
* Remove dependencies and requirements
* Revert "Remove dependencies and requirements"
This reverts commit fe7171b4cd391355ee2c
2019-04-12 10:13:30 -07:00
3d441dffad
Update HAP-python to 2.5.0 ( #23031 )
2019-04-12 13:26:52 +02:00
6d2412022b
Fix HomeKit fan speed conversion ( #22951 )
...
* Check that speed value from state is not 'None'
* Added tests
2019-04-10 08:35:17 +02:00
c4e31bc4df
Add linked battery sensor to HomeKit ( #22788 )
2019-04-09 23:13:48 +02:00
cfe4cf30ad
Add manifests ( #22699 )
...
* Add manifests
* Update auto name
* Update codeowners
* Add requirements from platforms
* Minor cleanup
* Incorporate changes from awarecan PR
2019-04-03 21:14:45 -07:00
9125e49628
Fix battery_level error - HomeKit ( #21120 )
2019-02-16 23:04:29 -08:00
c5de32e7b1
Climate const.py move ( #20945 )
...
* Move constants to const.py
* Import from const instead of climate
2019-02-14 20:34:43 +01:00
3736120c6a
Update file header ( #21061 )
...
* Update file header
* Fix lint issue
* Fix lint issue
2019-02-14 16:01:46 +01:00
d16d14b648
Media player const.py move ( #20822 )
...
* Move more constants to const.py
* Import constants directly from const
* ATTR_ENTITY_ID is not defined in media_player
* MEDIA_PLAYER_PLAY_MEDIA_SCHEMA is still in __init__.py
* Correct imports in tts
* PLATFORM_SCHEMA, SCHEMA is still defined in __init__.py
* Pandora imports several services
* Some additional fixes for move of const in media_player
* Fix hound lengths
2019-02-08 14:18:18 -08:00
a94a24f6f8
Added HomeKit fan speed based on speed_list ( #19767 )
...
Speed_list needs to be in ascending order.
2019-02-05 16:11:19 +01:00
1bd31e3459
Change STATE_UNKOWN to None ( #20337 )
...
* Change STATE_UNKOWN to None
* Change STATE_UNKOWN to None
* tests
* tests
* tests
* tests
* tests
* style
* fix comments
* fix comments
* update fan test
2019-01-24 08:20:20 +01:00
bf29824dac
Update HAP-python to 2.4.2 ( #19776 )
...
* Bugfixes for connection issues
2019-01-04 22:37:42 +01:00
1be440a72b
Upgrade pylint to 2.2.2 ( #18750 )
...
* Upgrade to 2.2.0
* simplifiable-if-expression fixes
* duplicate-string-formatting-argument fixes
* unused-import fixes
* Upgrade to 2.2.1
* Remove no longer needed disable
* Upgrade to 2.2.2
2018-12-06 11:54:44 +01:00
0ca94f239d
Update HAP-python 2.4.1 ( #18417 )
...
* Bugfixes
2018-11-16 11:42:48 +01:00
ed7aea006a
Add safe_mode HomeKit ( #18356 )
...
* Use: 'safe_mode: True' in case of pairing issues
2018-11-16 11:08:39 +01:00
132bb7902a
Update HAP-python to 2.4.0 ( #18355 )
2018-11-10 18:33:45 +01:00
c59b038512
Add scenes as switches HomeKit ( #17799 )
2018-11-05 21:36:30 +01:00
26ba4a56e8
Ignore duplicate state changes GarageDoor HomeKit ( #18149 )
...
* Ignore duplicate state changes GarageDoor HomeKit
* Don't ignore service_call
2018-11-05 16:42:19 +01:00
8ee0e0c6c6
Turn off not cancellable scripts automatically HomeKit ( #17793 )
2018-11-05 11:11:26 +01:00
959fa81ea6
Fix temperature interval Thermostat HomeKit ( #18192 )
...
* Will round to nearest .0 or .5
2018-11-04 22:04:51 +01:00
4a3f754033
Revert HomeKit update to 2.2.2 ( #18069 )
2018-11-01 19:35:02 +01:00
599390d985
Update HAP-python to 2.3.0 ( #17778 )
...
* Update HAP-python to 2.3.0
* Fix tests
2018-10-25 09:45:56 +02:00
a9a8cbbd10
Homekit component cleanup ( #17627 )
...
* hass.async_add_executor_job
* Fix accessories.run -> async_track_state_change
* Fixed media_player test
* Flags are now local vars
* consistent use of " and '
2018-10-20 00:14:05 +02:00
ff33cbd22f
Add water_heater support to HomeKit ( #17614 )
...
* Homekit add support for water_heater
* Added tests
2018-10-19 21:04:05 +02:00
fee87cd6ed
Add LogBook support to HomeKit ( #17180 )
2018-10-16 13:32:53 +02:00
37a47b5a59
Add faucet, shower, sprinkler, valve to HomeKit ( #17145 )
2018-10-05 12:43:50 +02:00
2e62afabdc
Added warning to HomeKit component ( #16807 )
...
* added warning if more then 100 devices are added to HomeKit
2018-10-05 12:32:26 +02:00
52ff232797
Bugfix invalid entity_config parameter HomeKit ( #17143 )
2018-10-04 20:37:04 +02:00
3bfe9e757e
Add Carbon Monoxide HomeKit Sensor ( #16664 )
2018-09-21 12:51:02 +02:00
dd9d53c83e
Update pydocstyle to 2.1.1 and flake8-docstrings to 1.3.0 ( #14557 )
...
* Update pydocstyle to 2.1.1 and flake8-docstrings to 1.3.0
* Pydocstyle D401 fixes
2018-08-24 10:28:43 +02:00
dbd0763f83
Grammar and spelling fixes ( #16065 )
2018-08-19 22:29:08 +02:00
b7c336a687
Pylint cleanups ( #15626 )
...
* Pylint 2 no-else-return fixes
* Remove unneeded abstract-class-not-used pylint disable
2018-07-23 10:16:05 +02:00
4de847f84e
Bugfix HomeKit name and serial_number ( #15600 )
...
* Bugfix HomeKit name and serial_number
* Revert serial_number changes
2018-07-22 09:51:42 +02:00
bf17ed0917
More pylint 2 fixes ( #15516 )
...
* Pylint 2 useless-import-alias fixes
* Pylint 2 chained-comparison fixes
* Pylint 2 consider-using-get fixes
* Pylint 2 len-as-condition fixes
2018-07-18 11:54:27 +02:00
e31dd4404e
Pylint 2 fixes ( #15487 )
...
* pylint 2 inline disable syntax fixes
* pylint 2 logging-not-lazy fixes
* pylint 2 consider-using-in fixes
* Revert pylint 2 inline disable syntax fixes addressing unused-imports
Will have a go at removing more unused imports altogether first.
2018-07-17 19:34:29 +02:00
1533bc1e1f
Add support for Homekit battery service ( #14288 )
2018-06-17 20:54:34 +02:00
722c27f1e2
HomeKit style clean up ( #14793 )
2018-06-17 13:37:44 +02:00
f5d74e07d5
Add support for outlets in HomeKit ( #14628 )
2018-06-01 18:04:54 +02:00
ab3717af76
Homekit Thermostat: Better support for temperature ranges ( #14679 )
...
* Support for obtaining temperature range
* Fallback to Defaults
* Fixed unit conversion
* Added test
2018-06-01 13:49:16 +02:00
f1f4d80f24
Homekit Bugfixes ( #14689 )
...
* Fix async bug
* Fix debounce bug
2018-05-30 12:39:27 +02:00
7d2563eb1f
Update HAP-python to 2.2.2 ( #14674 )
...
* Pass driver to accessory
* Added 'hk_driver' fixture for tests
2018-05-29 22:43:26 +02:00
6f4dd7b057
Improve Homekit media_player options ( #14637 )
...
* Optimize imports
* Optimize name
* Optimize config schema
* Rename mode to feature
* Replace mode with feature_list
2018-05-28 10:26:33 -04:00
143be49c66
Add HomeKit support for automations ( #14595 )
2018-05-25 11:38:48 +02:00
a9f19a16ee
Add HomeKit support for media players ( #14446 )
2018-05-25 11:37:20 +02:00
0589379de5
Homekit style cleanup ( #14556 )
...
* Style cleanup
* Sorted imports
* Harmonized service calls
* Test improvements
* Small update
2018-05-20 22:25:53 -04:00
12e76ef7c1
Update HAP-python to 2.1.0 ( #14528 )
2018-05-18 16:32:57 +02:00
4c328baaa6
Add code to HomeKit lock ( #14524 )
2018-05-18 13:52:52 +02:00
25dcddfeef
Add HomeKit support for fans ( #14351 )
2018-05-16 13:15:59 +02:00
234bf1f0ea
Spelling, grammar etc fixes ( #14432 )
...
* Spelling, grammar etc fixes
* s/an api data/data of an api/
2018-05-13 12:09:28 +02:00
621c653fed
Allow HomeKit name to be customized ( #14159 )
2018-05-11 14:22:45 +02:00
91fe6e4e56
Add debounce to move_cover ( #14314 )
...
* Add debounce to move_cover
* Fix spelling mistake
2018-05-06 20:55:38 -04:00
95d27bd1fa
Sensor device classes ( #14282 )
...
* Added light device class, moved device classes to const
* Removed unnecessary icons
* Replace 'lux' with 'lx'
* Fix comment
* Changed device_class name
2018-05-05 09:37:40 -04:00
255a85ad02
HomeKit: Support triggered state for alarm_control_panel ( #14285 )
2018-05-05 00:09:16 +02:00
bb76ba67f3
Homekit: Changed device_class requirement Humidity Sensor ( #14277 )
2018-05-04 22:48:38 +02:00
e37fd5b132
Update HAP-python to 2.0.0 ( #14278 )
...
* Fixed async (added 'async_add_job' and 'add_job')
* Driver status
* Use pyhap category constants
* Changed 'set_broker' to 'set_driver'
* Changed loader method names
* Use 'serv.configure_char'
* Use 'self.set_info_service'
* Use 'self.add_preload_service'
* Fix hound issue
* Updated HAP-python to 2.0.0
2018-05-04 16:46:00 +02:00
c9de2f015b
HomeKit - Climate: power state on/off support ( #14082 )
...
* add power state support on off
* Added check for current operation mode
* Extended 'set_heat_cool'
* Added tests
2018-05-03 18:22:43 +02:00
46c260fd85
Added CONF_IP_ADDRESS to HomeKit ( #14163 )
2018-04-30 08:58:17 -04:00
2091f86e25
Clean up HomeKit accessory information characteristics ( #14114 )
...
* Update accessory information characteristics
* Add firmware revision characteristic
2018-04-28 23:17:30 +02:00
c78e8eb578
Add support for light sensors with 'lx' unit to HomeKit ( #14131 )
...
* add support for light sensors with lx unit
* add test for light sensor with 'lx' unit
2018-04-28 17:14:34 +02:00
5fe4053021
Update device classes for contact sensor HomeKit ( #14051 )
2018-04-23 13:52:39 +02:00
51f55bddb7
HomeKit Alarm Control Panel Code Exception Fix ( #14025 )
...
* Catch exception for KeyError
* Use get and added test
2018-04-21 16:16:46 +02:00
b589dbf26c
Support basic covers with open/close/stop services HomeKit ( #13819 )
...
* Support basic covers with open/close/stop services
* Support optional stop
* Tests
2018-04-18 14:39:58 +02:00
993866a314
Support Garage Doors in HomeKit ( #13796 )
2018-04-12 18:08:48 +02:00
c863b9614c
Support CO2/PM2.5/Light sensors in HomeKit ( #13804 )
...
* Support co2/light/air sensor in HomeKit
* Add tests
* Added tests
* changed device_class lux to light
2018-04-12 15:01:41 +02:00
dd7e6edf61
HomeKit type_cover fix ( #13832 )
...
* Removed char_position_state
* Changed service call
2018-04-12 13:19:21 +02:00
2a5751c09d
Homekit refactor ( #13707 )
2018-04-11 22:24:14 +02:00
ae4e792651
Improved upgradeability HomeKit security_systems ( #13783 )
2018-04-09 22:57:10 +02:00
c61611d2b4
Add Homekit locks support ( #13625 )
...
* homekit: Add locks support
* Improved upgradeability
2018-04-09 16:23:49 +02:00
cb51553c2d
Support binary_sensor and device_tracker in HomeKit ( #13735 )
...
* Support binary_sensor and device_tracker for HomeKit
* Add test for get_accessory and binary sensor
* Test service.display_name and char_detected.display_name
* Split test to improve speed
2018-04-09 15:32:28 +02:00
262ea14e5a
Add timeout / debounce (for brightness and others) ( #13534 )
...
* Add async timeout feature
* Decorator for setter methods to limit service calls to HA
* Changed to async
* Use async_call_later
* Use lastargs, async_add_job
* Use dict for lastargs
* Updated tests to stop patch
2018-04-06 23:11:53 +02:00
85487612d5
Update Homekit to 1.1.9 ( #13716 )
...
* Version bump to HAP-python==1.1.9
* Updated types and tests
2018-04-06 10:20:59 -04:00
bb5484edac
Support color temperature in Homekit ( #13658 )
...
* Add support for color temperature
* Add test for color temp
2018-04-05 18:06:23 +02:00
206e38a2ab
Update HAP-python to 1.1.8 ( #13563 )
...
* Bump version to HAP-python==1.1.8
* Required changes for version change
* Small bugfix lights
2018-04-05 13:20:20 +02:00
692b2644c7
Minor style changes, cleanup ( #13654 )
...
* Minor style changes, cleanup
* Change 'self._entity.id' to 'self.entity_id'
* Use const 'STATE_OFF'
* Added CATEGORY constants
* Removed *args from accessory types
* Changed 'self._hass' to 'self.hass'
* Added log debug msg (for added lights)
2018-04-05 00:52:25 +02:00
f263a931f7
Bugfixes HomeKit covers, lights ( #13689 )
...
* covers -> current_position attribute
* lights -> hue and saturation attribute
2018-04-05 00:46:27 +02:00
cd96d7b2ec
Add pincode fallback ( #13587 )
...
* Add pincode log statement
* Moved msg to show_setup_msg
2018-04-01 08:38:29 -07:00
cea2de5eb5
HomeKit: Fix setting light brightness ( #13518 )
...
* Added test
2018-03-29 18:35:57 +02:00
2bebfec3a6
Homekit: Fix security systems ( #13499 )
...
* Fix alarm_code=None
* Added test
2018-03-27 23:39:25 +02:00
9eda04b787
Homekit: Bugfix Thermostat Fahrenheit support ( #13477 )
...
* Bugfix thermostat temperature conversion
* util -> temperature_to_homekit
* util -> temperature_to_states
* util -> convert_to_float
* Added tests, deleted log msg
2018-03-27 11:31:18 +02:00
7db37a3834
HomeKit: Bugfix & improved logging ( #13431 )
...
* Bugfix & improved logging
* Removed logging statements
* Removed logging test
2018-03-25 12:53:15 +02:00
553920780f
Added default return value for HS_Color ( #13395 )
2018-03-23 10:22:48 -07:00
0396725fe9
Homekit Bugfix: Use get instead of indexing ( #13353 )
...
Fixes bug for alarm_control_panel if not code is required.
2018-03-21 19:06:46 +01:00
89c7c80e42
Use hue/sat as internal light color interface ( #11288 )
...
* Accept and report both xy and RGB color for lights
* Fix demo light supported_features
* Add new XY color util functions
* Always make color changes available as xy and RGB
* Always expose color as RGB and XY
* Consolidate color supported_features
* Test fixes
* Additional test fix
* Use hue/sat as the hass core color interface
* Tests updates
* Assume MQTT RGB devices need full RGB brightness
* Convert new platforms
* More migration
* Use float for HS API
* Fix backwards conversion for KNX lights
* Adjust limitless min saturation for new scale
2018-03-18 15:00:29 -07:00
f6ae2d338d
Homekit: Use util functions for unit conversion ( #13253 )
...
* Updated to util/color for conversion
* Updated temperature sensor to use util/temperature conversion
2018-03-16 11:38:44 +01:00
2350ce96a6
Homekit: New supported devices ( #13244 )
...
* Fixed log message
* Added support for scripts
* Added support for lights
* Small refactoring
* Added support for humidity sensor
* Added tests
2018-03-16 01:05:28 +01:00
d348f09d3d
HomeKit Restructure (new config options) ( #12997 )
...
* Restructure
* Pincode will now be autogenerated and display using a persistence notification
* Added 'homekit.start' service
* Added config options
* Renamed files for types
* Improved tests
* Changes (based on feedback)
* Removed CONF_PIN_CODE
* Added services.yaml
* Service will only be registered if auto_start=False
* Bugfix names, changed default port
* Generate aids with zlib.adler32
* Added entity filter, minor changes
* Small changes
2018-03-15 02:48:21 +01:00
c48c8710b7
Bugfix HomeKit: Error string values for temperature ( #13162 )
2018-03-14 13:22:38 +01:00
3ca139e21e
HomeKit Bugfix: names ( #13031 )
...
* Fix display_names, changed default port (+1)
* Revert port change
2018-03-09 19:41:59 -08:00
4218b31e7b
Add support for alarm system, switch and thermostat to homekit ( #12819 )
...
* Added support for security system, switch and thermostat
* Processing review
* Only perform set call when the call didn't come from HomeKit
* Added support for alarm_code
* Take into account review remarks
* Provide tests for HomeKit security systems, switches and thermostats
* Support STATE_AUTO
* Guard if state exists
* Improve support for thermostat auto mode
* Provide both high and low at the same time for home assistant
* Set default values within accepted ranges
* Added tests for auto mode
* Fix thermostat test error
* Use attributes.get instead of indexing for safety
* Avoid hardcoded attributes in tests
2018-03-07 13:17:52 +01:00
168e1f0e2d
Improved Homekit tests ( #12800 )
...
* Added test for temperature fahrenheit
* Restructured tests to use more mocks
* Rearanged homekit constants
* Improved 'test_homekit_class'
* Added import statements
* Fix Pylint Test errors
2018-03-01 15:20:02 -08:00
4821858afb
Homekit schema gracefully fail with integer ( #12725 )
...
* Homekit schema gracefully fail with integer
* Fix return value
* Added test
* Fix 2
2018-02-27 01:09:49 +01:00
6a665ffb84
Fix homekit: temperature calculation ( #12720 )
2018-02-26 22:29:52 +01:00
27b1d448a3
Homekit Update, Support for TempSensor (°F) ( #12676 )
...
* Changed version of "HAP-python" to "v1.1.7"
* Updated acc file to simplify init calls
* Code refactored and '°F' temp Sensors added
* Changed call to 'HomeAccessory' and 'HomeBridge'
* Extended function of 'add_preload_service' to add additional characteristics
* Added function to override characteristic property values
* TemperatureSensor
* Added unit
* Added calc_temperature
* Updated tests
2018-02-25 19:27:40 -08:00
eacfbc048a
Improved Homekit tests ( #12647 )
...
* Spelling and typos
* Updated 'test_homekit_pyhap_interaction'
* Patch ip_address
2018-02-25 10:58:13 +01:00
42ab4e1366
Homekit component test bugfixes for py3.5
2018-02-20 01:40:56 +01:00
eec3bad94f
Add support for HomeKit ( #12488 )
...
* Basic Homekit support
* Added Temperatur Sensor
* Added Window Cover
* Code refactored
* Added class HomeAccessory(Accessory)
* Added class HomeBridge(Bridge)
* Changed homekit imports to relative, to enable use in custom_components
* Updated requirements
* Added docs
* Other smaller changes
* Changed Homekit from entity to class
* Changes based on feedback
* Updated config schema
* Add only covers that support set_cover_position
* Addressed comments, updated to pyhap==1.1.5
* For lint: added files to gen_requirements_all
* Added codeowner
* Small change to Wrapper classes
* Moved imports to import_types, small changes
* Small changes, added tests
* Homekit class: removed add_accessory since it's already covered by pyhap
* Added test requirement: HAP-python
* Added test suit for homekit setup and interaction between HA and pyhap
* Added test suit for get_accessories function
* Test bugfix
* Added validate pincode, tests for cover and sensor types
2018-02-19 14:46:22 -08:00
J. Nick Koston
springstan
Franck Nijhof
Paulus Schoutsen
Marcel Steinbach
Christian Clauss
Michael Dokolin
Ville Skyttä
Jc2k
David K
Fazli Sapuan
Bas Nijholt
Austin Drummond
Marc Hörsken
Javier González Calleja
Franck Nijhof
Aaron Bach
cdce8p
Pascal Vizeli
Josh Anderson
chmielowiec
cgtobi
Paulus Schoutsen
Joakim Plate
Fabian Affolter
Andreas Hartl
Daniel Høyer Iversen
quthla
ehendrix23
Julius Mittenzwei
Matt Schmitt
roiff
Maciej Bieniek
Mark Coombes
Nick Whyte
Yonsm
Phil Kates
Niklas Morberg
maxclaey
Adam Mills
Johann Kellerman