93a9a11065
Add config validator helper positive_float ( #41640 )
2020-10-11 22:04:49 +02:00
e5e6dda04f
Bump pypck to v0.7.2 ( #40716 )
2020-09-28 18:51:38 +02:00
d2b1918e9c
Drop UNIT_ prefix for percentage constant ( #39383 )
2020-09-05 21:09:14 +02:00
53545c984b
Log lines do not end with a full stop ( #37527 )
2020-07-05 23:04:19 +02:00
4a65bed0eb
Fix LCN cover behavior when using output ports ( #37034 )
...
* Fixed LCN cover behavior when connected to output ports
* Cover is assumed to be in an open state unless it is fully closed.
2020-06-24 15:10:56 +02:00
a7842b6301
Fix of LCN cover behavior ( #35050 )
2020-05-27 23:08:51 +02:00
066e921a8b
Rename SwitchDevice to SwitchEntity ( #34673 )
2020-04-26 18:50:37 +02:00
e4333a7a44
Rename Light to LightEntity ( #34593 )
2020-04-26 18:49:41 +02:00
8c5c963b96
Rename CoverDevice to CoverEntity ( #34595 )
2020-04-25 18:07:15 +02:00
29bc93ea98
Rename ClimateDevice to ClimateEntity ( #34591 )
2020-04-25 18:04:03 +02:00
b022e08db9
Rename BinarySensorDevice to BinarySensorEntity ( #34462 )
...
* Rename BinarySensorDevice to BinarySensorEntity
* Tweak
* Move deprecation warning to __new__, add test
* Move deprecation warning back to __init__
* Move deprecation warning to __init_subclass
2020-04-23 21:57:07 +02:00
ef9d9b17bd
Drop UNIT_ prefix for constants ( #34164 )
...
* Drop UNIT_ prefix for VOLT
* Drop UNIT_ prefix for DEGREE
* Drop UNIT_ prefix for CONDUCTIVITY
* Drop UNIT_ prefix for UV_INDEX
* Run isort
2020-04-21 19:45:53 +02:00
782d2d0b75
Revert incorrect sync/async conversion in LCN integration ( #34493 )
2020-04-21 12:36:23 +02:00
bc5a2da7b7
Add transition support to scenes, cleanup blocking parameter ( #34434 )
2020-04-20 18:07:50 -07:00
b893150154
Add and use UNIT_DEGREE constant ( #33978 )
...
* Add and use UNIT_DEGREE constant
* Replace more occurrences
* Add and use TEMP_KELVIN
* Run isort
2020-04-11 16:54:11 +02:00
04c4501455
Add and use UNIT_VOLT constant ( #33994 )
...
* Add and use UNIT_VOLT constant
* Run isort
2020-04-11 02:04:58 +02:00
24840b54ac
Add yamllint (in pre-commit and CI) ( #33676 )
...
* Add yamllint (in pre-commit and CI)
* Fix linting for all YAML files
* Bump and add it to requirements
* Fix gen_requirements for pre-commit, remove 'v' from version
2020-04-05 10:33:45 +02:00
f1d3c0d19b
Remove unused manifest fields ( #33595 )
2020-04-03 12:58:19 -07:00
aef06a3544
Directly call write state 2 ( #33513 )
...
* Directly call async_write_ha_state pt2
* Directly call async_write_ha_state pt2
* Fix mock
* Address comments
2020-04-03 09:34:50 +02:00
aaa1d06809
Directly call async_write_ha_state ( #33508 )
...
* Directly call async_write_ha_state
* Address comments
* Fix tests
2020-04-01 14:19:51 -07:00
607cdfdd32
Bump pypck to 0.6.4 ( #32775 )
2020-03-13 22:27:53 +01:00
f1a0ca7cd3
Add and use percentage constant ( #32094 )
...
* Add and use percentage constant
* Fix pylint error and broken test
2020-02-28 11:46:48 -08:00
157f972d72
Use f-strings in integrations starting with "H" - "L" ( #32265 )
...
* Use f-strings in integrations starting with "H"
* Use f-strings in integrations starting with "I"
* Use f-strings in integrations starting with "J"
* Use f-strings in integrations starting with "K"
* Use f-strings in integrations starting with "L"
* Fix lint error
* Use join instead of f-string in homekit_controller
* Use local variables with f-strings
* Fix lint error
* Escape the characters in f-string
* Sort imports with isort in homeworks light
* Fix pylint error
* Fix broken tests
* Fix broken tests v2
2020-02-28 12:39:29 +01:00
a85808e325
Add and use time related constants ( #32065 )
...
* Add and use time related constants
* Sort time constants and reuse them in data rate constants
* Fix greeneyemonitor import
* Fix greeneyemonitor import V2
* Fix failing here_travel_time test
* Add TIME_MONTHS and TIME_YEARS
* Use TIME_MINUTES in opentherm_gw and isy994
* Add and use TIME_MILLISECONDS
* Change inconsistent ones
* Add TIME_MICROSECONDS and TIME_WEEKS
* Use constants in apcupsd and travisci
* Fix import error in upnp sensor.py
* Fix isy994 sensor.py using TIME_YEARS
* Fix dyson tests
* Use TIME_SECONDS in more places
* Use TIME_DAYS in google wifi
2020-02-23 22:09:24 +02:00
df7d2b3aeb
Fix typos found by codespell ( #31243 )
...
* Fix typos found by codespell
* Fix typos found by codespell
* codespell: Furture ==> Future
* Update test_config_flow.py
* Update __init__.py
* Spellcheck: successfull ==> successful
* Codespell: unsuccesful ==> unsuccessful
* Codespell: cant ==> can't
* Codespell: firware ==> firmware
* Codespell: mimick ==> mimic
2020-01-31 08:33:00 -08:00
345cc244ed
Correct names in manifests (C-L) ( #30532 )
2020-01-07 08:19:17 +01:00
a84741392b
Format all manifests with prettier ( #30521 )
2020-01-06 21:28:23 +01:00
e6388e186c
Remove unnecessary string literal concatenations ( #30360 )
2020-01-02 21:17:10 +02:00
1dea0c9e34
Sort imports according to PEP8 for components starting with "L" ( #29771 )
2019-12-09 14:22:30 +01:00
c7da781efc
Update documentation link URL for integrations in all manifests ( #27114 )
2019-10-02 09:25:44 -07:00
87f1f6cc9f
Removes unnecessary utf8 source encoding declarations ( #26887 )
2019-09-24 21:28:50 -07:00
9035efee10
Fixes invalid JSON files and whitespace corrections in YAML files ( #26396 )
2019-09-03 16:02:42 -07:00
7203027cbf
Use literal string interpolation in integrations K-M (f-strings) ( #26389 )
2019-09-03 21:14:00 +02:00
617133e465
Correct file permissions, removing executable bits ( #26376 )
2019-09-03 14:13:44 +02:00
4de97abc3a
Black
2019-07-31 12:25:30 -07:00
c4f673c894
LCN cover control via output ports ( #25511 )
...
* LCN motor control via oputput ports
* Remove default value from cover validator
2019-07-29 20:49:44 +02:00
84cf76ba36
Climate 1.0 ( #23899 )
...
* Climate 1.0 / part 1/2/3
* fix flake
* Lint
* Update Google Assistant
* ambiclimate to climate 1.0 (#24911 )
* Fix Alexa
* Lint
* Migrate zhong_hong
* Migrate tuya
* Migrate honeywell to new climate schema (#24257 )
* Update one
* Fix model climate v2
* Cleanup p4
* Add comfort hold mode
* Fix old code
* Update homeassistant/components/climate/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/climate/const.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* First renaming
* Rename operation to hvac for paulus
* Rename hold mode to preset mode
* Cleanup & update comments
* Remove on/off
* Fix supported feature count
* Update services
* Update demo
* Fix tests & use current_hvac
* Update comment
* Fix tests & add typing
* Add more typing
* Update modes
* Fix tests
* Cleanup low/high with range
* Update homematic part 1
* Finish homematic
* Fix lint
* fix hm mapping
* Support simple devices
* convert lcn
* migrate oem
* Fix xs1
* update hive
* update mil
* Update toon
* migrate deconz
* cleanup
* update tesla
* Fix lint
* Fix vera
* Migrate zwave
* Migrate velbus
* Cleanup humity feature
* Cleanup
* Migrate wink
* migrate dyson
* Fix current hvac
* Renaming
* Fix lint
* Migrate tfiac
* migrate tado
* Fix PRESET can be None
* apply PR#23913 from dev
* remove EU component, etc.
* remove EU component, etc.
* ready to test now
* de-linted
* some tweaks
* de-lint
* better handling of edge cases
* delint
* fix set_mode typos
* apply PR#23913 from dev
* remove EU component, etc.
* ready to test now
* de-linted
* some tweaks
* de-lint
* better handling of edge cases
* delint
* fix set_mode typos
* delint, move debug code
* away preset now working
* code tidy-up
* code tidy-up 2
* code tidy-up 3
* address issues #18932 , #15063
* address issues #18932 , #15063 - 2/2
* refactor MODE_AUTO to MODE_HEAT_COOL and use F not C
* add low/high to set_temp
* add low/high to set_temp 2
* add low/high to set_temp - delint
* run HA scripts
* port changes from PR #24402
* manual rebase
* manual rebase 2
* delint
* minor change
* remove SUPPORT_HVAC_ACTION
* Migrate radiotherm
* Convert touchline
* Migrate flexit
* Migrate nuheat
* Migrate maxcube
* Fix names maxcube const
* Migrate proliphix
* Migrate heatmiser
* Migrate fritzbox
* Migrate opentherm_gw
* Migrate venstar
* Migrate daikin
* Migrate modbus
* Fix elif
* Migrate Homematic IP Cloud to climate-1.0 (#24913 )
* hmip climate fix
* Update hvac_mode and preset_mode
* fix lint
* Fix lint
* Migrate generic_thermostat
* Migrate incomfort to new climate schema (#24915 )
* initial commit
* Update climate.py
* Migrate eq3btsmart
* Lint
* cleanup PRESET_MANUAL
* Migrate ecobee
* No conditional features
* KNX: Migrate climate component to new climate platform (#24931 )
* Migrate climate component
* Remove unused code
* Corrected line length
* Lint
* Lint
* fix tests
* Fix value
* Migrate geniushub to new climate schema (#24191 )
* Update one
* Fix model climate v2
* Cleanup p4
* Add comfort hold mode
* Fix old code
* Update homeassistant/components/climate/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/climate/const.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* First renaming
* Rename operation to hvac for paulus
* Rename hold mode to preset mode
* Cleanup & update comments
* Remove on/off
* Fix supported feature count
* Update services
* Update demo
* Fix tests & use current_hvac
* Update comment
* Fix tests & add typing
* Add more typing
* Update modes
* Fix tests
* Cleanup low/high with range
* Update homematic part 1
* Finish homematic
* Fix lint
* fix hm mapping
* Support simple devices
* convert lcn
* migrate oem
* Fix xs1
* update hive
* update mil
* Update toon
* migrate deconz
* cleanup
* update tesla
* Fix lint
* Fix vera
* Migrate zwave
* Migrate velbus
* Cleanup humity feature
* Cleanup
* Migrate wink
* migrate dyson
* Fix current hvac
* Renaming
* Fix lint
* Migrate tfiac
* migrate tado
* delinted
* delinted
* use latest client
* clean up mappings
* clean up mappings
* add duration to set_temperature
* add duration to set_temperature
* manual rebase
* tweak
* fix regression
* small fix
* fix rebase mixup
* address comments
* finish refactor
* fix regression
* tweak type hints
* delint
* manual rebase
* WIP: Fixes for honeywell migration to climate-1.0 (#24938 )
* add type hints
* code tidy-up
* Fixes for incomfort migration to climate-1.0 (#24936 )
* delint type hints
* no async unless await
* revert: no async unless await
* revert: no async unless await 2
* delint
* fix typo
* Fix homekit_controller on climate-1.0 (#24948 )
* Fix tests on climate-1.0 branch
* As part of climate-1.0, make state return the heating-cooling.current characteristic
* Fixes from review
* lint
* Fix imports
* Migrate stibel_eltron
* Fix lint
* Migrate coolmaster to climate 1.0 (#24967 )
* Migrate coolmaster to climate 1.0
* fix lint errors
* More lint fixes
* Fix demo to work with UI
* Migrate spider
* Demo update
* Updated frontend to 20190705.0
* Fix boost mode (#24980 )
* Prepare Netatmo for climate 1.0 (#24973 )
* Migration Netatmo
* Address comments
* Update climate.py
* Migrate ephember
* Migrate Sensibo
* Implemented review comments (#24942 )
* Migrate ESPHome
* Migrate MQTT
* Migrate Nest
* Migrate melissa
* Initial/partial migration of ST
* Migrate ST
* Remove Away mode (#24995 )
* Migrate evohome, cache access tokens (#24491 )
* add water_heater, add storage - initial commit
* add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
delint
* Add Broker, Water Heater & Refactor
add missing code
desiderata
* update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
* bugfix - loc_idx may not be 0
more refactor - ensure pure async
more refactoring
appears all r/o attributes are working
tweak precsion, DHW & delint
remove unused code
remove unused code 2
remove unused code, refactor _save_auth_tokens()
* support RoundThermostat
bugfix opmode, switch to util.dt, add until=1h
revert breaking change
* store at_expires as naive UTC
remove debug code
delint
tidy up exception handling
delint
add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
delint
bugfix - loc_idx may not be 0
more refactor - ensure pure async
more refactoring
appears all r/o attributes are working
tweak precsion, DHW & delint
remove unused code
remove unused code 2
remove unused code, refactor _save_auth_tokens()
support RoundThermostat
bugfix opmode, switch to util.dt, add until=1h
revert breaking change
store at_expires as naive UTC
remove debug code
delint
tidy up exception handling
delint
* update CODEOWNERS
* fix regression
* fix requirements
* migrate to climate-1.0
* tweaking
* de-lint
* TCS working? & delint
* tweaking
* TCS code finalised
* remove available() logic
* refactor _switchpoints()
* tidy up switchpoint code
* tweak
* teaking device_state_attributes
* some refactoring
* move PRESET_CUSTOM back to evohome
* move CONF_ACCESS_TOKEN_EXPIRES CONF_REFRESH_TOKEN back to evohome
* refactor SP code and dt conversion
* delinted
* delinted
* remove water_heater
* fix regression
* Migrate homekit
* Cleanup away mode
* Fix tests
* add helpers
* fix tests melissa
* Fix nehueat
* fix zwave
* add more tests
* fix deconz
* Fix climate test emulate_hue
* fix tests
* fix dyson tests
* fix demo with new layout
* fix honeywell
* Switch homekit_controller to use HVAC_MODE_HEAT_COOL instead of HVAC_MODE_AUTO (#25009 )
* Lint
* PyLint
* Pylint
* fix fritzbox tests
* Fix google
* Fix all tests
* Fix lint
* Fix auto for homekit like controler
* Fix lint
* fix lint
2019-07-08 14:00:24 +02:00
b8acbf3c3a
Corrected number of default LCN segment coupler scan tryouts ( #24678 )
...
* Bump to pypck==0.6.2
* Set default segment coupler scan tryouts to 0
2019-06-22 13:27:41 +02:00
d22c3f13b2
Fix validator for lcn.send_keys service ( #24580 )
...
* Fix validator for lcn.send_keys service
* Removed lowercase table names from send_keys and lock_keys validators
* Revert lowercase regex.
* Fixed table name regex.
2019-06-18 09:04:36 -07:00
a3794b3241
Fixed wrong setpoint value on startup when climate was previously turned off ( #24377 )
2019-06-07 19:29:51 -05:00
7771ecfe58
Bump to pypck==0.6.1 ( #24356 )
2019-06-06 15:30:14 -07:00
408ae44bdd
Add LCN scene platform ( #24242 )
2019-06-05 11:12:05 +02:00
50db622689
Add service calls for LCN component ( #24105 )
2019-05-29 15:59:38 -07:00
c928f82cbf
Refactoring of LCN component ( #23824 )
...
* Moved helper functions to const.py
* Removed pypck attribute from LcnDevice
* Bump to pypck==0.6.0
* Added myself as a codeowner
* Moved helper functions to helpers.py
2019-05-25 11:40:44 +02:00
2b7021407c
Add LCN climate platform ( #22542 )
...
* Add LCN climate component
* Updates of ha_state are done async
* Changes due to manifest.json
2019-05-11 10:24:02 +02:00
662375bdd7
Changes due to manifest.json. Awaiting coroutines instead of creating tasks ( #23321 )
2019-04-23 19:20:20 -07:00
2c07bfb9e0
Remove dependencies and requirements ( #23024 )
...
* Remove dependencies and requirements
* Revert "Remove dependencies and requirements"
This reverts commit fe7171b4cd391355ee2c
2019-04-12 10:13:30 -07:00
cfe4cf30ad
Add manifests ( #22699 )
...
* Add manifests
* Update auto name
* Update codeowners
* Add requirements from platforms
* Minor cleanup
* Incorporate changes from awarecan PR
2019-04-03 21:14:45 -07:00
ee8cd861e0
Add LCN binary_sensor component ( #22341 )
2019-03-28 23:09:45 +01:00
4b1de61110
Use relative imports inside integrations ( #22235 )
...
* Use relative imports inside integrations
* Lint
* Fix automation tests
* Fix scene imports
2019-03-20 22:56:46 -07:00
Matthias Alphart
Andre Lengwenus
springstan
Franck Nijhof
Erik Montnemery
Paulus Schoutsen
Christian Clauss
Ville Skyttä
Bas Nijholt
Franck Nijhof
Pascal Vizeli
cgtobi
Paulus Schoutsen