* Wemo Dimmer Support
Add support for the Wemo Dimmer Switch
* Add newline at end of file
Re: findings from hound
* Syntax for the hound
Sorry for the excess edits, new to python
* Change order of Models
Fixed order back to ABC order
* Changes as requested
I made the changes I was comfortable with at this point, the dimmer addition now very closely mirrors what is under the switch component, at least as far as the parts necessary for the dimmer.
Any changes past these with regards to the subscription registry / callback info is probably going to be over my head, but I will try to look deeper at them if required.
* Remove unnecessary lines
Removed self.schedule_update_ha_state() from turn off / turn on
* Remove update(self)
Removed update method
* Move subscription to async_added_to_hass
* Move subscription.
* Clean up.
* Wait until the job in the executor is done
* Run gen_requirements_all script
* Only update instance attributes via callback
* mychevy: added basic mychevy component
This implements a component using the mychevy library (which utilizes
selenium to webscrape the mychevy website for onstar for your
car). The architecture works by having a background thread doing
periodic polling of the website, and updating the sensors when new
data is found.
This requires rather more setup than most platforms, as you need
working selenium. Instructions will be provided on the component
list. All the sensors are spawned and coordinated from a single "hub"
as they are really just attributes of the same web scraping session.
* mychevy: only poll every 30 minutes
* mychevy: update sensors
* mychevy: better error handling
* mychevy: tweaking for refactor
* mychevy: bump version to handle odometer > 1000
* mychevy: great sensor reorg
* mychevy: add binary sensors
* mychevy: bump mychevy requirement
* mychevy: use dispatcher
Instead of directly modifying the sensors, this lets us use a
dispatcher to have sensors pull information from the car object when
there is a relevant update for them.
* mychevy: remove from coverage
* mychevy: dedicated constants for dispatch signals
This makes the dispatch signals dedicated topics, and fixes updating
the state on the sensors so that they are correctly updated.
* mychevy: updated with comments from martinhjelmare
* mychevy: set battery icon based with helper function
* Address additional review feedback
* Address additional review comments
* Strip off the RTS/IO ID from the entity ID
* Ignore exception thrown when the device does not provide an active state
* Send actions with a label for easier identification in the Tahoma log
* Linting
* Strip off the RTS/IO ID from the entity ID, take 2
As per suggestions, let HA do the standard initialization and assign
an appropriate entity_id, instead of overriding it with the lengthy
unique_id coming from the TaHoma devices.
* Hyperion: Add brightness, HDMI and effect support
- added brightness support to dim the hyperion light
- changed the "OFF" command to set the color to [0,0,0] after clearing all priorities.
This is neccesary to keep the light turned off when an HDMI grabber is used for ambilight with hyperion.
- added HDMI ambilight mode recognition and control.
by setting the "hdmi_priority" in your "configuration.yaml" file (defaults to 880), home assistant will now be able to recognize when the hyperion light is in HDMI ambilight mode and will change its icon to an HDMI symbol and set the status to ON.
Switching the hyperion light to HDMI ambilight mode can be done through the effect option (clears all priorities such that the HDMI grabber remains).
- added effect support for the default effects of hyperion, a custom list can be defined in the "configuration.yaml" file by using the "effect_list" option.
* Hyperion: Add brightness, HDMI and effect support
- added brightness support to dim the hyperion light
- changed the "OFF" command to set the color to [0,0,0] after clearing all priorities.
This is neccesary to keep the light turned off when an HDMI grabber is used for ambilight with hyperion.
- added HDMI ambilight mode recognition and control.
by setting the "hdmi_priority" in your "configuration.yaml" file (defaults to 880), home assistant will now be able to recognize when the hyperion light is in HDMI ambilight mode and will change its icon to an HDMI symbol and set the status to ON.
Switching the hyperion light to HDMI ambilight mode can be done through the effect option (clears all priorities such that the HDMI grabber remains).
- added effect support for the default effects of hyperion, a custom list can be defined in the "configuration.yaml" file by using the "effect_list" option.
- fixed some style issues with too long lines
* Hyperion: Add brightness, HDMI and effect support
- fixed some more indentation style issues
* Hyperion: Add brightness, HDMI and effect support
- yet more fixed visuel indent issues
* Hyperion: Add brightness, HDMI and effect support
- more visuel indents
* Hyperion: Add brightness, HDMI and effect support
- fixed invalid variable "A"
* Hyperion: Add brightness, HDMI and effect support
- remove unnececary brackets
- specify specific exceptions
* correct changing state holding attributes during a service method
Proccesed the comments of @MartinHjelmare: https://github.com/home-assistant/home-assistant/pull/11543#pullrequestreview-88328659
* indent correction
corrected tab instead of 4 spaces
* Hyperion: Add brightness, HDMI and effect support
- changed 'none' to None
- renamed "self._skip_check" to "self._skip_update"
* Add brightness, HDMI and effect support
changed checking if a list is empty from "list == []" to "not list"
* Adding support for Lutron Radio RA2 shades as cover components.
* Adding initial version of the Lutron shades component.
* Fixed line-length violation detected by Hound.
* Added snips.say and snips.say_action services
* Added snips.say and snips.say_action services
* Merged services.yaml changes I missed
* added tests for new service configs
* Woof
* Woof Woof
* Changed attribute names to follow hass standards.
* updated test_snips with new attribute names
* Added support for enable/disable motion detection
* Changed name of variable for exception, lint error
* Moved motion_detection_enabled property to the other properties
* Fix error when name is non-latin script
When the name is non-latin script (e.g. Japanese), slugify returns empty string and causes failure in a later stage. This commit fixes the issue by using default name.
* Add test
* Make the order shown in the history component match the ordering given in the configuration of included entities (if any)
* return the sorted result
* optimize sorting. since entities only appear once, we can break from a search on first find, and no copy of the list is needed
* Changed device type of media player and cover to switch
Covers and media players should not be of device type 'light'. Example: If user requests all lights to switch to off, covers are closed and media players are affected too.
* Fix test
* Make the rpi_rf component thread-safe
The previous implementation suffered from race conditions when two rpi_rf switches are triggered at the same time. This implementation uses an RLock to give one thread at a time exclusive access to the rfdevice object.
* cleanup
* fix lint
Thom Troy
angel12
Heiko Thiery
Sean Dague
covrig
heydonms
Fabian Affolter
Kane610
Lukas Barth
Daniel Høyer Iversen
Giuseppe
starkillerOG
Jesse Hills
Alok Saboo
Nicko van Someren
Jason Kölker
Kees Schollaart
Pascal Vizeli
Thijs de Jong
tschmidty69
Bob Anderson
Adam Mills
Jack Fan
Paulus Schoutsen
Andreas Björshammar
cgtobi
Laqoore
Andrey
kennedyshead
Sean Wilson
hawk259
Daniel Perna
Ulrich Dobramysl
Josh Anderson
Dan Nixon
Anders Melchiorsen
randellhodges