abaf89f57d
Update xknx to 1.0.1 ( #77244 )
2022-08-25 14:13:39 -04:00
0c617a0471
Fix level controllable output controls in deCONZ ( #77223 )
...
Fix level controllable output controls
2022-08-25 14:13:36 -04:00
58debaf837
Minor deCONZ clean up ( #76323 )
...
* Rename secondary_temperature with internal_temperature
* Prefix binary and sensor descriptions matching on all sensor devices with COMMON_
* Always create entities in the same order
Its been reported previously that if the integration is removed and setup again that entity IDs can change if not sorted in the numerical order
* Rename alarmsystems to alarm_systems
* Use websocket enums
* Don't use legacy pydeconz constants
* Bump pydeconz to v103
* unsub -> unsubscribe
2022-08-25 14:13:36 -04:00
b8b4031d31
Bump ZHA dependencies ( #77125 )
2022-08-25 14:12:24 -04:00
df5b57431d
Bump pySwitchbot to 0.18.14 ( #77090 )
2022-08-25 14:12:23 -04:00
1150c3a51a
Bump pySwitchbot to 0.18.12 ( #77040 )
2022-08-25 14:12:22 -04:00
c1d02388d1
Bump pynetgear to 0.10.7 ( #76754 )
2022-08-17 23:08:53 -04:00
d142618297
Bump aiohomekit to 1.2.11 ( #76784 )
2022-08-15 21:09:46 -04:00
d91e9f7f98
Bump homeconnect to 0.7.2 ( #76773 )
2022-08-15 21:09:45 -04:00
70541eac61
Fix stale data with SensorPush sensors ( #76771 )
2022-08-15 21:09:45 -04:00
30a5e396d3
Bump aiohue to 4.5.0 ( #76757 )
2022-08-15 21:09:44 -04:00
ae99b53757
Bump bimmer_connected to 0.10.2 ( #76751 )
...
Co-authored-by: rikroe <rikroe@users.noreply.github.com>
2022-08-15 21:09:43 -04:00
71a6128c65
Fix bad data with inkbird bbq sensors ( #76739 )
2022-08-15 21:09:43 -04:00
69ea07f29d
Bump aiohomekit to 1.2.10 ( #76738 )
2022-08-15 21:09:42 -04:00
41faf9092a
Update xknx to 1.0.0 🎉 ( #76734 )
2022-08-15 21:09:41 -04:00
d10e2336e2
Bump pySwitchbot to 0.18.10 to handle empty data and disconnects ( #76684 )
...
* Bump pySwitchbot to 0.18.7 to handle empty data
Fixes #76621
* bump again
* bump
* bump for rssi on disconnect logging
2022-08-15 21:09:39 -04:00
875de80b41
Bump pySwitchbot to 0.18.6 to fix disconnect race ( #76656 )
2022-08-15 21:09:38 -04:00
666e938b14
Bump pySwitchbot to 0.18.5 ( #76640 )
2022-08-15 21:09:37 -04:00
872b2f56ac
Update systembridgeconnector to 3.4.4 ( #75362 )
...
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
2022-08-15 21:09:36 -04:00
99c20223e5
Fix Govee 5181 with old firmware ( #76600 )
2022-08-12 14:04:16 -04:00
a3ea881a01
Fix homekit_controller not noticing ip and port changes that zeroconf has found ( #76570 )
2022-08-12 14:04:13 -04:00
6e688b2b7f
Bump ZHA dependencies ( #76565 )
2022-08-12 14:04:12 -04:00
303d8b05d1
Bump aiohomekit to 1.2.8 ( #76532 )
2022-08-09 17:18:12 -04:00
e5088d7e84
Fix pairing with HK accessories that do not provide format for vendor chars ( #76502 )
2022-08-09 17:18:10 -04:00
6c1597ff98
Bump govee-ble to 0.14.0 to fix H5052 sensors ( #76497 )
2022-08-09 17:18:09 -04:00
edac82487d
Fix inkbird ibbq2s that identify with xbbq ( #76492 )
2022-08-09 17:18:09 -04:00
5213148fa8
Bump aiohomekit to 1.2.6 ( #76488 )
2022-08-09 17:18:08 -04:00
8e3f5ec470
Bump version of pyunifiprotect to 4.0.12 ( #76465 )
2022-08-09 17:14:01 -04:00
f01b0a1a62
Fix Govee 5185 Meat Thermometers with older firmware not being discovered ( #76414 )
2022-08-09 17:13:02 -04:00
5026bff426
Bump aiobafi6 to 0.7.2 to unblock #76328 ( #76330 )
2022-08-07 12:13:02 -04:00
4b63aa7f15
Bump pySwitchbot to 0.18.4 ( #76322 )
...
* Bump pySwitchbot to 0.18.3
Fixes #76321
Changelog: https://github.com/Danielhiversen/pySwitchbot/compare/0.17.3...0.18.3
* bump
2022-08-07 12:13:01 -04:00
9cf11cf6ed
Bump pydeconz to v102 ( #76287 )
2022-08-07 12:13:00 -04:00
8971a2073e
Bump ZHA dependencies ( #76275 )
2022-08-07 12:12:59 -04:00
0e7bf35e4a
Update gree to use the network component to set discovery interfaces ( #75812 )
2022-08-07 12:12:56 -04:00
42509056bd
Enable strict typing for HomeKit Controller config flow module ( #76233 )
2022-08-04 21:50:48 +02:00
1808dd3d84
Bump AIOAladdin Connect to 0.1.41 ( #76217 )
2022-08-04 21:50:34 +02:00
31fed328ce
Bump NextDNS library ( #76207 )
2022-08-04 21:50:30 +02:00
1a030f118a
BLE pairing reliablity fixes for HomeKit Controller ( #76199 )
...
- Remove the cached map from memory when unpairing so
we do not reuse it again if they unpair/repair
- Fixes for accessories that use a config number of
0
- General reliablity improvements to the pairing process
under the hood of aiohomekit
2022-08-04 21:50:27 +02:00
2710e4b5ec
Fix arm away in Risco ( #76188 )
2022-08-04 21:50:16 +02:00
d2955a48b0
Bump bleak to 0.15.1 ( #76136 )
2022-08-04 21:47:15 +02:00
81ee24738b
Fix deconz group log warning ( #76114 )
2022-08-03 11:25:07 +02:00
29f6d7818a
Bump `azure-servicebus` to support py3.10 ( #76092 )
...
Bump azure-servicebus
2022-08-03 11:25:03 +02:00
42a1f6ca20
Bump pySwitchbot to 0.17.3 to fix hang at startup ( #76103 )
2022-08-03 08:57:18 +02:00
d85129c527
Bump aiohomekit to 1.2.3 to fix hang at startup ( #76102 )
2022-08-03 08:57:15 +02:00
690f051a87
Bump pyatv to 0.10.3 ( #76091 )
2022-08-03 08:53:50 +02:00
213812f087
Add support for SwitchBot Plug Mini ( #76056 )
2022-08-03 08:53:43 +02:00
e073f6b439
Bump Frontend to 20220802.0 ( #76087 )
2022-08-02 19:36:26 +02:00
c90a223cb6
Bump AIOAladdinConnect to 0.1.39 ( #76082 )
2022-08-02 19:36:16 +02:00
30cd087f6f
Fix govee H5074 data ( #76057 )
2022-08-02 09:38:03 +02:00
66afd1e696
Bump bluetooth-adapters to 0.1.3 ( #76052 )
2022-08-02 09:37:59 +02:00
Matthias Alphart
Robert Svensson
puddly
J. Nick Koston
starkillerOG
Frank
Marcel van der Veldt
rikroe
Marvin Wichmann
Aidan Timson
Jc2k
Christopher Bailey
Jean-François Roy
mkmer
Maciej Bieniek
On Freund
Heine Furubotten
Eloston
Zack Barett