5116d02747
deCONZ - Improve service tests ( #26663 )
...
* Improve configure service tests
* Add refresh device service test
* Add tests for setup and unload services
* Remove refresh device test from test_init
* Extra verification of deconz services existance in hass.data
2019-09-16 10:08:13 +02:00
9c2053a251
deCONZ - Remove mechanisms to import a configuration from configuration.yaml ( #26648 )
2019-09-14 22:53:59 +02:00
41c9ed5d51
deCONZ - battery sensor instead of battery attribute ( #26591 )
...
* Allow all sensors to create battery sensors
* Neither binary sensor, climate nor sensor will have battery attributes
2019-09-14 19:15:18 +02:00
5885c3f353
Move deCONZ services to their own file ( #26645 )
2019-09-14 15:15:06 +02:00
6a9ecf0015
[ci skip] Translation update
2019-09-14 00:32:15 +00:00
fb1acfccc9
deCONZ - create deconz_events through sensor platform ( #26592 )
...
* Move event creation into sensor platform where it belongs
* Fixed the weird failing test observed during device automation PR
2019-09-14 00:16:37 +02:00
10f742d552
[ci skip] Translation update
2019-09-13 00:33:08 +00:00
d4c5cf3967
[ci skip] Translation update
2019-09-12 00:33:41 +00:00
53a3f2e83d
[ci skip] Translation update
2019-09-11 00:33:50 +00:00
c680c07c65
deCONZ device automations ( #26366 )
...
* Early draft
* Getting there
* Working fully with Hue dimmer remote
* Fix Balloobs comments
* No side effects in constructor
* Improve hue dimmer
* Add Ikea remote control
* Add xiaomi button support
* Refactor getting deconz event
* Added xiaomi devices and tradfri wireless dimmer
* Resolve unique id from device id
* Add Hue Tap and Tradfri on off switch
* More triggers for ikea on off switch and Aqara double wall switch
* Add support for Tradfri open close remote
* Fix changes after rebase
* Initial test
* Change id to event_id
* Fix translations and add subtypes
* Try if tests pass without the new tests
* Revert disabling tests
Add new exception InvalidDeviceAutomationConfig
* Ignore places calling remotes
* Enable all gateway tests
* Found the issue, now to identify which test creates it
* Remove block till done
* See if device automation test passes in azure
* Register event to device registry
* Enable test sensors
* Skip deconz event tests currently failing
* Added reason why skipping tests
2019-09-10 16:56:28 -07:00
9df5c0ab86
[ci skip] Translation update
2019-09-10 00:32:37 +00:00
e204d22a9e
[ci skip] Translation update
2019-09-08 00:32:16 +00:00
0b1f389c76
[ci skip] Translation update
2019-09-07 00:32:45 +00:00
3714cdaa6d
[ci skip] Translation update
2019-09-06 00:33:40 +00:00
518d2c31bb
deCONZ - use entity registry disabled_by to control available entities ( #26219 )
...
* First draft
* Support enabling disabled entities
* Clean up
* Move import
* Local entity enabled replaced during rebase
* Add option flow test
* Mark options properties with option
2019-09-05 16:38:00 -07:00
1cbb895d20
[ci skip] Translation update
2019-09-05 10:11:41 +00:00
1bd22a129b
[ci skip] Translation update
2019-09-05 00:32:29 +00:00
fba06049d2
Merge remote-tracking branch 'origin/master' into dev
2019-09-04 09:18:32 -07:00
3b1a4a52e9
[ci skip] Translation update
2019-09-04 07:41:09 +00:00
a74bb3fd5e
String has nothing to do with class method naming ( #26368 )
2019-09-03 23:20:14 -07:00
6a24d893c8
Use literal string interpolation in integrations B-D (f-strings) ( #26378 )
2019-09-03 17:09:59 +02:00
c6d839f8ae
String has nothing to do with class method naming ( #26368 )
2019-09-02 22:12:10 -07:00
d1e3fbd622
deCONZ - Dont update entry if data is equal
2019-09-01 22:30:45 -07:00
385a496944
Update translations
2019-09-01 22:30:09 -07:00
6102eb9f1c
Migrate Axis, deCONZ and UniFi to use config entry subclass ( #26173 )
...
* Use init_subclass for Config Entries
* Pylint cant handle subclass being the only user of imports
2019-09-01 13:15:48 +02:00
d1874d148a
deCONZ - Dont update entry if data is equal
2019-08-31 15:56:43 +02:00
62338dd28e
Fix deConz thermostat integration ( #26267 )
...
* Fixed logger name to allow selective logging
* Fixed thermostat mode ('off' and 'heat' modes were not consistent with Eurotronic Spirit Zigbee Thermostat state) and added 'auto' to supported mode
* Added required blank lines in code
* Black formatting
* Revert logging code added to each files. Instead, only replaced "." by __package__ in const.py
* Added a test on self._device.state_on to determine hvac_mode
* Black formatting
* Added debug message when unsupported hvac_mode is encountered
* Applied formatting recommandations
* Updated tests for 'auto' hvac_mode
2019-08-30 14:28:39 +02:00
04d2dbb573
Add translations
2019-08-29 12:32:46 -07:00
36312bdef1
Add translations
2019-08-29 12:32:15 -07:00
d156648c55
deCONZ normalizes cover values to follow zigbee spec ( #26240 )
2019-08-28 13:38:50 -07:00
907ffdb762
Update translations
2019-08-28 12:46:02 -07:00
e69953fe2d
Update translations
2019-08-28 12:45:48 -07:00
1f2e0d3949
deCONZ normalizes cover values to follow zigbee spec ( #26240 )
2019-08-27 21:06:14 +02:00
e41c002f70
Add config entry options support to deCONZ ( #26049 )
2019-08-19 14:42:21 -07:00
87119472a3
Update translations
2019-08-11 20:42:50 -07:00
8b6ddc22a5
Fix deconz allow_clip_sensor and allow_deconz_groups options ( #25811 )
2019-08-09 19:31:58 +02:00
37d78af42c
Add translations
2019-07-31 16:16:40 -07:00
4de97abc3a
Black
2019-07-31 12:25:30 -07:00
c6c4c07f2d
deCONZ - cleanup sensor attributes ( #25540 )
...
* Improve attributes
2019-07-28 21:01:52 +02:00
da53e0a836
deCONZ - Add power attribute for consumption sensors ( #25512 )
...
* Add power attribute for consumption sensors
* Bump dependency to v62
2019-07-28 18:25:38 +02:00
ea5d3ce85a
Add a unique identifier to deCONZ groups ( #25485 )
...
* Add a unique identifier to deconz groups
2019-07-25 18:39:38 +02:00
84cf76ba36
Climate 1.0 ( #23899 )
...
* Climate 1.0 / part 1/2/3
* fix flake
* Lint
* Update Google Assistant
* ambiclimate to climate 1.0 (#24911 )
* Fix Alexa
* Lint
* Migrate zhong_hong
* Migrate tuya
* Migrate honeywell to new climate schema (#24257 )
* Update one
* Fix model climate v2
* Cleanup p4
* Add comfort hold mode
* Fix old code
* Update homeassistant/components/climate/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/climate/const.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* First renaming
* Rename operation to hvac for paulus
* Rename hold mode to preset mode
* Cleanup & update comments
* Remove on/off
* Fix supported feature count
* Update services
* Update demo
* Fix tests & use current_hvac
* Update comment
* Fix tests & add typing
* Add more typing
* Update modes
* Fix tests
* Cleanup low/high with range
* Update homematic part 1
* Finish homematic
* Fix lint
* fix hm mapping
* Support simple devices
* convert lcn
* migrate oem
* Fix xs1
* update hive
* update mil
* Update toon
* migrate deconz
* cleanup
* update tesla
* Fix lint
* Fix vera
* Migrate zwave
* Migrate velbus
* Cleanup humity feature
* Cleanup
* Migrate wink
* migrate dyson
* Fix current hvac
* Renaming
* Fix lint
* Migrate tfiac
* migrate tado
* Fix PRESET can be None
* apply PR#23913 from dev
* remove EU component, etc.
* remove EU component, etc.
* ready to test now
* de-linted
* some tweaks
* de-lint
* better handling of edge cases
* delint
* fix set_mode typos
* apply PR#23913 from dev
* remove EU component, etc.
* ready to test now
* de-linted
* some tweaks
* de-lint
* better handling of edge cases
* delint
* fix set_mode typos
* delint, move debug code
* away preset now working
* code tidy-up
* code tidy-up 2
* code tidy-up 3
* address issues #18932 , #15063
* address issues #18932 , #15063 - 2/2
* refactor MODE_AUTO to MODE_HEAT_COOL and use F not C
* add low/high to set_temp
* add low/high to set_temp 2
* add low/high to set_temp - delint
* run HA scripts
* port changes from PR #24402
* manual rebase
* manual rebase 2
* delint
* minor change
* remove SUPPORT_HVAC_ACTION
* Migrate radiotherm
* Convert touchline
* Migrate flexit
* Migrate nuheat
* Migrate maxcube
* Fix names maxcube const
* Migrate proliphix
* Migrate heatmiser
* Migrate fritzbox
* Migrate opentherm_gw
* Migrate venstar
* Migrate daikin
* Migrate modbus
* Fix elif
* Migrate Homematic IP Cloud to climate-1.0 (#24913 )
* hmip climate fix
* Update hvac_mode and preset_mode
* fix lint
* Fix lint
* Migrate generic_thermostat
* Migrate incomfort to new climate schema (#24915 )
* initial commit
* Update climate.py
* Migrate eq3btsmart
* Lint
* cleanup PRESET_MANUAL
* Migrate ecobee
* No conditional features
* KNX: Migrate climate component to new climate platform (#24931 )
* Migrate climate component
* Remove unused code
* Corrected line length
* Lint
* Lint
* fix tests
* Fix value
* Migrate geniushub to new climate schema (#24191 )
* Update one
* Fix model climate v2
* Cleanup p4
* Add comfort hold mode
* Fix old code
* Update homeassistant/components/climate/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/climate/const.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* First renaming
* Rename operation to hvac for paulus
* Rename hold mode to preset mode
* Cleanup & update comments
* Remove on/off
* Fix supported feature count
* Update services
* Update demo
* Fix tests & use current_hvac
* Update comment
* Fix tests & add typing
* Add more typing
* Update modes
* Fix tests
* Cleanup low/high with range
* Update homematic part 1
* Finish homematic
* Fix lint
* fix hm mapping
* Support simple devices
* convert lcn
* migrate oem
* Fix xs1
* update hive
* update mil
* Update toon
* migrate deconz
* cleanup
* update tesla
* Fix lint
* Fix vera
* Migrate zwave
* Migrate velbus
* Cleanup humity feature
* Cleanup
* Migrate wink
* migrate dyson
* Fix current hvac
* Renaming
* Fix lint
* Migrate tfiac
* migrate tado
* delinted
* delinted
* use latest client
* clean up mappings
* clean up mappings
* add duration to set_temperature
* add duration to set_temperature
* manual rebase
* tweak
* fix regression
* small fix
* fix rebase mixup
* address comments
* finish refactor
* fix regression
* tweak type hints
* delint
* manual rebase
* WIP: Fixes for honeywell migration to climate-1.0 (#24938 )
* add type hints
* code tidy-up
* Fixes for incomfort migration to climate-1.0 (#24936 )
* delint type hints
* no async unless await
* revert: no async unless await
* revert: no async unless await 2
* delint
* fix typo
* Fix homekit_controller on climate-1.0 (#24948 )
* Fix tests on climate-1.0 branch
* As part of climate-1.0, make state return the heating-cooling.current characteristic
* Fixes from review
* lint
* Fix imports
* Migrate stibel_eltron
* Fix lint
* Migrate coolmaster to climate 1.0 (#24967 )
* Migrate coolmaster to climate 1.0
* fix lint errors
* More lint fixes
* Fix demo to work with UI
* Migrate spider
* Demo update
* Updated frontend to 20190705.0
* Fix boost mode (#24980 )
* Prepare Netatmo for climate 1.0 (#24973 )
* Migration Netatmo
* Address comments
* Update climate.py
* Migrate ephember
* Migrate Sensibo
* Implemented review comments (#24942 )
* Migrate ESPHome
* Migrate MQTT
* Migrate Nest
* Migrate melissa
* Initial/partial migration of ST
* Migrate ST
* Remove Away mode (#24995 )
* Migrate evohome, cache access tokens (#24491 )
* add water_heater, add storage - initial commit
* add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
delint
* Add Broker, Water Heater & Refactor
add missing code
desiderata
* update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
* bugfix - loc_idx may not be 0
more refactor - ensure pure async
more refactoring
appears all r/o attributes are working
tweak precsion, DHW & delint
remove unused code
remove unused code 2
remove unused code, refactor _save_auth_tokens()
* support RoundThermostat
bugfix opmode, switch to util.dt, add until=1h
revert breaking change
* store at_expires as naive UTC
remove debug code
delint
tidy up exception handling
delint
add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
add water_heater, add storage - initial commit
delint
add missing code
desiderata
update honeywell client library & CODEOWNER
add auth_tokens code, refactor & delint
refactor for broker
delint
bugfix - loc_idx may not be 0
more refactor - ensure pure async
more refactoring
appears all r/o attributes are working
tweak precsion, DHW & delint
remove unused code
remove unused code 2
remove unused code, refactor _save_auth_tokens()
support RoundThermostat
bugfix opmode, switch to util.dt, add until=1h
revert breaking change
store at_expires as naive UTC
remove debug code
delint
tidy up exception handling
delint
* update CODEOWNERS
* fix regression
* fix requirements
* migrate to climate-1.0
* tweaking
* de-lint
* TCS working? & delint
* tweaking
* TCS code finalised
* remove available() logic
* refactor _switchpoints()
* tidy up switchpoint code
* tweak
* teaking device_state_attributes
* some refactoring
* move PRESET_CUSTOM back to evohome
* move CONF_ACCESS_TOKEN_EXPIRES CONF_REFRESH_TOKEN back to evohome
* refactor SP code and dt conversion
* delinted
* delinted
* remove water_heater
* fix regression
* Migrate homekit
* Cleanup away mode
* Fix tests
* add helpers
* fix tests melissa
* Fix nehueat
* fix zwave
* add more tests
* fix deconz
* Fix climate test emulate_hue
* fix tests
* fix dyson tests
* fix demo with new layout
* fix honeywell
* Switch homekit_controller to use HVAC_MODE_HEAT_COOL instead of HVAC_MODE_AUTO (#25009 )
* Lint
* PyLint
* Pylint
* fix fritzbox tests
* Fix google
* Fix all tests
* Fix lint
* Fix auto for homekit like controler
* Fix lint
* fix lint
2019-07-08 14:00:24 +02:00
e841f568c1
Update translations
2019-06-24 08:27:46 -07:00
ca70b96005
Update translations
2019-06-18 11:54:56 -07:00
92816b57ef
Update translations
2019-06-14 14:53:13 -07:00
9aeb75f28d
deCONZ - Change attribute Watts to W ( #24535 )
2019-06-14 20:14:45 +02:00
fadfb89b4c
Load the SSDP component only when it's needed ( #24420 )
...
* fix(hue): Load the SSDP component only when it's needed
* fix(deconz): Don't load the SSDP component when it's not needed
* Update config_flow.py
* Update test_config_flow.py
2019-06-10 09:11:07 -07:00
84e6813779
Rename via_hub to via_device ( #24360 )
...
* Rename via_hub to via_device
* Fixed registry interactions
2019-06-10 09:10:44 -07:00
3fa84039f8
deCONZ fix retry set state( #24410 )
2019-06-08 17:45:10 +02:00
48276b041c
deCONZ - properly identify configured bridge ( #24378 )
2019-06-08 08:43:18 +02:00
Robert Svensson
HomeAssistant Azure
HomeAssistant Azure
Paulus Schoutsen
Franck Nijhof
5mauggy
Nikolay Vasilchuk
Pascal Vizeli
Julien Brochet
Penny Wood