* Fire events on homekit TV remote key press
* Changes from code review
* black
* isort
* flake8
* Update tests/components/homekit/test_type_media_players.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Ensure camera stream can be restarted after failure
* If ffmpeg failed to start, was killed, or the iOS device
closed the stream right away, the stream could never
be started until the HomeKit bridge was restarted.
* watch ffmpeg instead of checking only once
* handle forceful shutdowns gracefully
* Increase coverage
* Homekit cameras - Add codecs support
* Add valid_codecs + move audio application parameter
* Increase video bufsize
* Increase audio bufsize
* Update config flow to be aware of the copy option
* Add tests for copy video and audio codec
* remove unused from test
* remove unused from test
Co-authored-by: J. Nick Koston <nick@koston.org>
* Add homekit camera support
* Cleanup pyhapcamera inheritance
* Add camera to homekit manifest
* Use upstream pyhap server handler in homekit
* Remove unused homekit constants
* Fix lint errors in homekit camera
* Update homekit camera log messages
* Black after conflict fixes
* More conflict fixes
* missing srtp
* Allow streaming retry when ffmpeg fails to connect
* Fix inherit of camera config, force kill ffmpeg on failure
* Fix audio (Home Assistant only comes with OPUS)
* Fix audio (Home Assistant only comes with OPUS)
* Add camera to the list of supported domains.
* add a test for camera creation
* Add a basic test (still needs more as its only at 44% cover)
* let super handle reconfigure_stream
* Remove scaling as it does not appear to be needed and causes artifacts
* Some more basic tests
* make sure no exceptions when finding the source from the entity
* make sure the bridge forwards get_snapshot
* restore full coverage to accessories.py
* revert usage of super for start/stop stream
* one more test
* more mocking
* Remove -tune zerolatency, disable reconfigure_stream
* Restore -tune zerolatency
Co-authored-by: John Carr <john.carr@unrouted.co.uk>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Config flow for homekit
Allows multiple homekit bridges to run
HAP-python state is now stored at .storage/homekit.{entry_id}.state
aids is now stored at .storage/homekit.{entry_id}.aids
Overcomes 150 device limit by supporting
multiple bridges.
Name and port are now automatically allocated
to avoid conflicts which was one of the main
reasons pairing failed.
YAML configuration remains available in order to offer entity
specific configuration.
Entries created by config flow can add and remove
included domains and entities without having to restart
* Fix services as there are multiple now
* migrate in executor
* drop title from strings
* Update homeassistant/components/homekit/strings.json
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Make auto_start advanced mode only, add coverage
* put back title
* more references
* delete port since manual config is no longer needed
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Display a QR code for homekit pairing
This will reduce the failure rate with HomeKit
pairing because there is less chance of entry
error.
* Add coverage
* Test that the qr code is created
* I cannot spell
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* HomeKit: Store generated aid against unique_id where possible
* Fix conflict
* Fix max accessories check
* homekit counts the bridge as an accessory
* Add coverage for aidmanager
* prepare for merge
Co-authored-by: J. Nick Koston <nick@koston.org>
* Prevent a single accessory setup failure from breaking all HomeKit accessories
Raise the max devices to 150 as the spec allows for this
many. Previously 100 made sense because of the event
storms when homekit started would sometimes break pairing,
as these have largely been fixed in 0.109 (still a few
to cleanup) using the HAP spec limit of 150 is now possible.
* Handle both failure states
* Convert homekit fans to use service callbacks
* Convert homekit fans to use service callbacks
Service callbacks allow us ensure that we call
fan services in the correct order.
* Avoid calling turn_on if a speed is sent and the device is on
* Fix test to not leave files behind
* Fix test
* Update homeassistant/components/homekit/type_fans.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Set homekit alarm/sensor/switch state as soon as possible
This change is part of a multi-part effort to fix the
HomeKit event storms on startup.
Previously we would set the states after HomeKit
had started up which meant that when the controller
client connected it would request the states and get
a list of default states so all the initial states
would always be wrong. The defaults states generally went
unnoticed because we set the state of each HomeKit device
soon after which would result in an event storm in the log
that looked like the following for every client and every
device:
Sending event to client: ('192.168.x.x', 58410)
Sending event to client: ('192.168.x.x', 53399)
Sending event to client: ('192.168.x.x', 53399)
To solve this, we now set the state right away when we
create the entity in HomeKit, so it is correct on
initial sync, which avoids the event storm. Additionally,
we now check all states values before sending an update
to HomeKit to ensure we do not send events when nothing
has changed.
* pylint
* Fix event storm in covers as well
* fix refactoring error in security system
* cover positions, now with constants
* Convert homekit thermostats to use service callbacks
Service callbacks allow us to get all the temperature
changes in one request so we can avoid all the
need to store state and debounce.
* remove excess debug
* Fix lock and light tests
* Ensure all code for Thermostats has coverage
* I am answering all the homekit cases anyways so might as well be aware of regressions
* Make lock notifications reliable
* Update homeassistant/components/homekit/type_lights.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Fix reversed door closing/opening states in HomeKit
When we closed the door we would set state 2 which
is "Opening" it should have been 3 which is
"Closing"
When we opened the door we would set state 3 which
is "Closing" it should have been 2 which is
"Opening"
Add constants to make this easier to catch
in the future.
* Remove debug
* Add note about target door state
* Add homekit configuration option to bind to default interface
Homekit can fail to be discoverable because the
zeroconf default is to bind to all interfaces
(InterfaceChoice.All). This does not work
on some systems and (InterfaceChoice.Default) which
binds to 0.0.0.0 is needed for homekit to zeroconf
to function.
A new option is available for homekit
zeroconf_default_interface: true
* Update tests
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Update homeassistant/components/homekit/__init__.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Review items
* has a default
* Revert "has a default"
This reverts commit 24ecf0920f.
Breaks the tests
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
Home Assistant auto mode is described as
"The device is set to a schedule, learned behavior, AI."
HomeKit Accessory Protocol expects "heating or cooling to maintain
temperature within the heating and cooling threshold of the
target temperature"
Since HomeKit is expecting to set temperatures in this mode,
mapping homekit state 3 ("Auto") to Home Assistant HVAC_MODE_HEAT_COOL
is more inline with how Home Assistant defines HVAC_MODE_HEAT_COOL
as "The device supports heating/cooling to a range"
Homekit only has Off/Heat/Cool/Auto at this time, but
at least we can prevent the device from erroring
by mapping dry and fan to cool so it continues
to function.
* Switch homekit lights to use service callbacks
Service callbacks allow us to get the on/off, brightness, etc
all in one call so we remove all the complexity that was
previously needed to handle the out of sync states
We now get the on event and brightness event at the same time
which allows us to prevent lights from flashing up to 100%
before the requested brightness.
* Fix STATE_OFF -> STATE_ON,brightness:0
* Add HomeKit support for slat tilting
* Reset tilt-specific attribute, not position attribute
Co-Authored-By: J. Nick Koston <nick@koston.org>
* Add explanation why we fix HomeKit's targets
We have to assume that the device has worse precision than HomeKit. If it
reports back a state that is only _close_ to HK's requested state, we'll
"fix" what HomeKit requested so that it won't appear out of sync.
Co-authored-by: J. Nick Koston <nick@koston.org>
In PR#24804 the step size was changed to match the step size
of the device that HomeKit is controlling. Since HomeKit
is always working in TEMP_CELSIUS and the step size is based on
the Home Assistant units setting, we were mixing data with different
units of measure when Home Assistant was using imperial units.
This regression presented the symptom that setting the
temperature to 73F would result in 74F. Other values are affected
where the math doesn't happen to work out.
HomeKit currently has a default of 0.1 in the spec and the override
of this value has been removed.
* Use f-strings in integrations starting with "H"
* Use f-strings in integrations starting with "I"
* Use f-strings in integrations starting with "J"
* Use f-strings in integrations starting with "K"
* Use f-strings in integrations starting with "L"
* Fix lint error
* Use join instead of f-string in homekit_controller
* Use local variables with f-strings
* Fix lint error
* Escape the characters in f-string
* Sort imports with isort in homeworks light
* Fix pylint error
* Fix broken tests
* Fix broken tests v2
* HomeKit: update position state characteristic for covers
position state is a mandatory characteristic for HK window coverings
* Test position state characteristic
* Move imports to top for homekit
* Moved back a couple imports, added annotation to disable import-outside-toplevel
* Fix all tests in test_homekit.py
* Limit available heat/cool modes for HomeKit thermostats.
The Home app only shows appropriate modes (heat/cool/auto) for the device. Depending on the climate integration, disabling the auto start might be needed.
* Include improved mapping for HVAC modes in tests
* Remove malformed pylint disable markers
* Remove some unused imports
* Remove some unneeded lint exclusions
* Remove more unneeded lint exclusions
* Add specific codes to all noqa's
* Add options to specify advertised IP and MAC for HomeKit Bridge
This makes use of HAP-python's new feature in version 2.6.0
that allows to specify the mDNS advertised IP and MAC address.
This is a requirement for the following use cases:
- Running Home Assistant behind a NAT, e.g. inside Docker.
- Running it on a system with multiple interfaces there
the default IP address, DNS entry and hostname diverge.
The forwarding of the required mDNS packets can be done with
an avahi-daemon based gateway, e.g. by using enable-reflector=yes.
Specifying the MAC address makes it possible to identify an
accessory in case HA is run inside a ephemeral docker container.
Whitespace changes were performed due to black and flake8.
* Update tests for HomeKit Bridge due to IP and MAC advertising
Whitespace changes were performed due to black and flake8.
* Remove the possibility to set the MAC address of the HomeKit Bridge
Since the MAC address is a random device ID, there is no need
for the user to be able to set a custom MAC address value for it.
Whitespace changes were performed due to black and flake8.
* Fix homekit temperature sensor for round with one decimal
* Removing unnecesary operations
* Adapting tests for new temperature_to_homekit() result precision
* Move more constants to const.py
* Import constants directly from const
* ATTR_ENTITY_ID is not defined in media_player
* MEDIA_PLAYER_PLAY_MEDIA_SCHEMA is still in __init__.py
* Correct imports in tts
* PLATFORM_SCHEMA, SCHEMA is still defined in __init__.py
* Pandora imports several services
* Some additional fixes for move of const in media_player
* Fix hound lengths
* hass.async_add_executor_job
* Fix accessories.run -> async_track_state_change
* Fixed media_player test
* Flags are now local vars
* consistent use of " and '
* Support binary_sensor and device_tracker for HomeKit
* Add test for get_accessory and binary sensor
* Test service.display_name and char_detected.display_name
* Split test to improve speed
* Add async timeout feature
* Decorator for setter methods to limit service calls to HA
* Changed to async
* Use async_call_later
* Use lastargs, async_add_job
* Use dict for lastargs
* Updated tests to stop patch
* Accept and report both xy and RGB color for lights
* Fix demo light supported_features
* Add new XY color util functions
* Always make color changes available as xy and RGB
* Always expose color as RGB and XY
* Consolidate color supported_features
* Test fixes
* Additional test fix
* Use hue/sat as the hass core color interface
* Tests updates
* Assume MQTT RGB devices need full RGB brightness
* Convert new platforms
* More migration
* Use float for HS API
* Fix backwards conversion for KNX lights
* Adjust limitless min saturation for new scale
* Restructure
* Pincode will now be autogenerated and display using a persistence notification
* Added 'homekit.start' service
* Added config options
* Renamed files for types
* Improved tests
* Changes (based on feedback)
* Removed CONF_PIN_CODE
* Added services.yaml
* Service will only be registered if auto_start=False
* Bugfix names, changed default port
* Generate aids with zlib.adler32
* Added entity filter, minor changes
* Small changes
* Added support for security system, switch and thermostat
* Processing review
* Only perform set call when the call didn't come from HomeKit
* Added support for alarm_code
* Take into account review remarks
* Provide tests for HomeKit security systems, switches and thermostats
* Support STATE_AUTO
* Guard if state exists
* Improve support for thermostat auto mode
* Provide both high and low at the same time for home assistant
* Set default values within accepted ranges
* Added tests for auto mode
* Fix thermostat test error
* Use attributes.get instead of indexing for safety
* Avoid hardcoded attributes in tests
* Added test for temperature fahrenheit
* Restructured tests to use more mocks
* Rearanged homekit constants
* Improved 'test_homekit_class'
* Added import statements
* Fix Pylint Test errors
* Changed version of "HAP-python" to "v1.1.7"
* Updated acc file to simplify init calls
* Code refactored and '°F' temp Sensors added
* Changed call to 'HomeAccessory' and 'HomeBridge'
* Extended function of 'add_preload_service' to add additional characteristics
* Added function to override characteristic property values
* TemperatureSensor
* Added unit
* Added calc_temperature
* Updated tests
* Basic Homekit support
* Added Temperatur Sensor
* Added Window Cover
* Code refactored
* Added class HomeAccessory(Accessory)
* Added class HomeBridge(Bridge)
* Changed homekit imports to relative, to enable use in custom_components
* Updated requirements
* Added docs
* Other smaller changes
* Changed Homekit from entity to class
* Changes based on feedback
* Updated config schema
* Add only covers that support set_cover_position
* Addressed comments, updated to pyhap==1.1.5
* For lint: added files to gen_requirements_all
* Added codeowner
* Small change to Wrapper classes
* Moved imports to import_types, small changes
* Small changes, added tests
* Homekit class: removed add_accessory since it's already covered by pyhap
* Added test requirement: HAP-python
* Added test suit for homekit setup and interaction between HA and pyhap
* Added test suit for get_accessories function
* Test bugfix
* Added validate pincode, tests for cover and sensor types
J. Nick Koston
Nick Whyte
HomeAssistant Azure
Paulus Schoutsen
stickpin
Greg Thornton
Jc2k
Knapoc
Ville Skyttä
springstan
Franck Nijhof
Marcel Steinbach
Christian Clauss
Michael Dokolin
David K
Fazli Sapuan
Bas Nijholt
Austin Drummond
Marc Hörsken
Javier González Calleja
Franck Nijhof
Aaron Bach
cdce8p
Pascal Vizeli
Josh Anderson
chmielowiec
cgtobi
Paulus Schoutsen
Joakim Plate
Fabian Affolter
Andreas Hartl
Daniel Høyer Iversen
quthla
ehendrix23
Julius Mittenzwei
Matt Schmitt
roiff
Maciej Bieniek
Mark Coombes
Yonsm
Phil Kates
Niklas Morberg
maxclaey
Adam Mills
Johann Kellerman