* Add SwitchBee Integration
* fixes
* improved API and more logs
* fixed test_config_flow code
* removed light and cover
* Fixed CR comments, updated pylib, improved response time and lowered the scan interval for lower latency
* CR fixes, added advanced setup form to let the
user choose the following:
- scan interval in seconds: default 5
- whether to expose scenarios and group switches from the CU or not
* used SCAN_INTERVAL_SEC instead of typing just the number
* Fixed PR comments, added unit tests
* fixes
* Improved the pypi and updated the code accordingly
* Add SwitchBee Integration
* fixes
* improved API and more logs
* fixed test_config_flow code
* removed light and cover
* Fixed CR comments, updated pylib, improved response time and lowered the scan interval for lower latency
* CR fixes, added advanced setup form to let the
user choose the following:
- scan interval in seconds: default 5
- whether to expose scenarios and group switches from the CU or not
* used SCAN_INTERVAL_SEC instead of typing just the number
* Fixed PR comments, added unit tests
* fixes
* Improved the pypi and updated the code accordingly
* fixes
* restored new line in .coveragerc
* test: increased config_flow test coverage
* removed two way type
* Updated CODEOWNERS
* fix: code review comments
* fixed review comments
* added device_info
* moved device info to attribute
* Initial version of Nobø Ecohub.
* Options update listener for Nobø Ecohub
* Unit test for nobo_hub config flow
* Cleanup
* Moved comment re backwards compatibility
* Improved tests
* Improved tests
* Options flow test
Pylint
* Fix backwards compatibility mode
* Don't require Python 3.9
* Import form configuration.yaml
* Check if device is already configured.
Correct tests for only discovering serial prefix
Fix importing when only serial suffix is configured
* Use constants
* Pylint and variable name clenaup.
* Review
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Fix tests
* Correct disabling off_command and on_commands ("Default" is a hard coded week profile in the hub).
* Improve options dialog
* Configure override type in options dialog
* Formatting
* pyupgrade
* Incorporated review comments
* Incorporated review comments.
* Incorporated second round of review comments.
* Add polling to discover preset change in HVAC_MODE_AUTO.
* Added tests/components/nobo_hub to CODEOWNERS.
* Update homeassistant/components/nobo_hub/config_flow.py
Review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Update homeassistant/components/nobo_hub/climate.py
Review
Co-authored-by: Allen Porter <allen.porter@gmail.com>
* Simplify if tests.
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Separate config step for manual configuration.
* Fixed indentation
* Made async_set_temperature more robust
* Thermometer supports tenths even though thermostat is in ones.
* Preserve serial suffix in config dialog on error.
* Initial version of Nobø Ecohub.
* Improved tests
* Review
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Configure override type in options dialog
* Separate config step for manual configuration.
* Update homeassistant/components/nobo_hub/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* Formatting (prettier)
* Fix HA stop listener.
* Review
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Review
- Removed workaround to support "OFF" setting.
- Simplified config flow to add a new device.
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Fixed review comments
* Update en.json with correction in review.
* Implemented review comments:
- Register devices
- Simplifed async_set_temperature
* Register hub as device in init module
* Implemented review comments.
Upgraded pynobo to 1.4.0.
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Avoid tacking on the device name in the entity name
* Inherit entity name from device name
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Allen Porter <allen.porter@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add BThome BLE
* Update BThome to latest version
* 0.3.4
* Rename to bthome 2
* Fix uuids not being found
* Make energy a total increasing state class
* Change unit of measurement of VOC
* Use short identifier
* Fix the reauth flow
* Bump bthome_ble
* Parameterize sensor tests
* Remove Move function to parameter
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* refactor volvooncall to use ConfigFlow
* remove unused constant SIGNAL_STATE_UPDATED
* implemented feedback
* improve ConfigFlow UX by giving an option for region=None
* implemented more feedback
* next round of feedback
* implemented more feedback
* improve test coverage
* more test coverage
* Apply suggestions from code review
* implemented feedback on tests
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add support for USB dongles to the hardware integration
* Update hardware integrations
* Adjust tests
* Add USB discovery for SkyConnect 1.0
* Improve test coverage
* Apply suggestions from code review
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Fix frozen dataclass shizzle
* Adjust test
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
* Add Landis+Gyr Heat Meter integration
* Add contant for better sensor config
* Add test for init
* Refactor some of the PR suggestions in config_flow
* Apply small fix
* Correct total_increasing to total
* Add test for restore state
* Add MWh entity that can be added as gas on the energy dashoard
* Remove GJ as unit
* Round MWh to 5 iso 3 digits
* Update homeassistant/components/landisgyr_heat_meter/const.py
* Update CODEOWNERS
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add basic tests to the HDMI-CEC component
* Add tests for the HDMI-CEC switch component
* Add test for watchdog code
* Start adding tests for the HDMI-CEC media player platform
Also some cleanup and code move.
* Add more tests for media_player
And cleanup some switch tests.
* Improve xfail message for features
* Align test pyCEC dependency with main dependency
* Make fixtures snake_case
* Cleanup call asserts
* Cleanup service tests
* fix issues with media player tests
* Cleanup MockHDMIDevice class
* Cleanup watchdog tests
* Add myself as code owner for the HDMI-CEC integration
* Fix async fire time changed time jump
* Fix event api sync context
* Delint tests
* Parametrize watchdog test
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add new LaCrosse View integration
* Add new LaCrosse View integration
* Add retry logic
* Actually use the start time for the retry logic
* Get new token after 1 hour
* Replace retry logic with more reliable logic
* Improve test coverage
* Add device info and unique id to config entry
* Fix manufacturer name
* Improve token refresh and check sensor permission
* Improve test cover
* Add LaCrosse View to .strict-typing
* Remove empty fields in manifest.json
* Fix mypy
* Add retry logic for get_data
* Add missing break statement in retry decorator
* Fix requirements
* Finish suggestions by Allen Porter
* Suggestions by Allen Porter
* Fix typing issues with calls to get_locations and get_sensors
* Add Govee BLE integration
* add missing files
* remove test file not needed yet
* fix
* add bbq sensors
* fixed lib
* bump again to fix the names
* fix discovery of the newer bbq devices
* fix the test to test the right thing
* verify no outstanding flows
* only accept entities that match the platform
* refactor
* refactor
* refactor
* Refactor PassiveBluetoothDataUpdateCoordinator to support multiple platforms
* cover
* Update for new model
* Update for new model
* Update tests/components/govee_ble/test_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* purge dead code
* backmerge from integration
* Update docstring
* Update docstring
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Initial xiaomi_ble integration
* black
* Update homeassistant/components/xiaomi_ble/config_flow.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Update homeassistant/components/xiaomi_ble/config_flow.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Apply suggestions from code review
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Update tests/components/xiaomi_ble/test_config_flow.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Update homeassistant/components/xiaomi_ble/sensor.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Update tests/components/xiaomi_ble/test_config_flow.py
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
* Remove debug code
* Need 'proper' MAC when running tests on linux
* Need to use proper MAC so validation passes
* Add tests for already_in_progress and already_configured
* copy test, add session fixture
* fix test
Co-authored-by: Ernst Klamer <e.klamer@gmail.com>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Switchbot add support for hygrometers
* Update CODEOWNERS
* Improve debug
* Remove redundant mention to temp unit
* Adopt FlowResultType
* Modify SwitchBot data within coordinator
* Increase logging for switchbot sensor
* Revert "Increase logging for switchbot sensor"
This reverts commit d8b377429c.
Co-authored-by: J. Nick Koston <nick@koston.org>
Sergio Conde Gómez
Robert Hillis
Franck Nijhof
jafar-atili
Alex Thompson
Michael
J. Nick Koston
Øyvind Matheson Wergeland
Pascal Vizeli
Justin Vanderhooft
Paulus Schoutsen
Ernst Klamer
Jeef
y34hbuddy
Kevin Addeman
Rami Mosleh
Erik Montnemery
Vincent Knoop Pathuis
Charles Garwood
Koen van Zuijlen
Pieter Mulder
Laz
Martin Hjelmare
Jonathan Keslin
Eloston
IceBotYT
qiz-li
Jc2k
Diogo F. Andrade Murteira
puddly