* add familyhub.py camera
* fix import and REQUIREMENTS
* add to coveragerc
* fix formatting to make houndci-bot happy
* ran scripts/gen_requirements_all.py
* use CONF_IP_ADDRESS
* Revert "ran scripts/gen_requirements_all.py"
This reverts commit 3a38681d8a.
* fix library name
* add missing docstrings and enable polling
* Sort imports
This commit bumps the pycmus version used by the cmus component. There
was a bug in the previous version used, 1.0.0, when running in local
mode. This was caused by a mtreinish/pycmus#1 and also was reported in
the home-assistant forums (but not as an issue):
https://community.home-assistant.io/t/cant-install-cmus-component/7961
Version 0.1.1 of pycmus fixes this issue so it should work properly for
users running cmus and home-assistant on the same machine.
* Make mysensors component async
* Use async dispatcher and discovery.
* Run I/O in executor.
* Make mysensors actuator methods async.
* Upgrade pymysensors to 0.13.0.
* Use async serial gateway.
* Use async TCP gateway.
* Use async mqtt gateway.
* Start gateway before hass start event
* Make sure gateway is started after discovery of persistent devices
and after corresponding platforms have been loaded.
* Don't wait to start gateway until after hass start.
* Bump pymysensors to 0.14.0
* Gogogate2 - bump version
Uses latest version of library which ensures commands to device are idempotent
* Update requirements_all
* Expose sensor temperature
* update version
* import attribute
* Set temperature
* Remove temperature attribute
Removed temperature attribute until it can be re-implemented as a separate sensor.
* Update ordering
* Fix copy-&-paste issue
* Setup all-linking service
* Remove extra line
* Remove linefeed and tab escape chars
* Add services delete_all_link, load_all_link_database and print_all_link_database
* Check if reload is set
* Confirm entity is InsteonPLMEntity before attempting to load or print ALDB
* Debug load and print ALDB
* Debug print aldb
* Debug print_aldb
* Get entity via platform
* Track Insteon entities in component
* Store entity list in hass.data
* Add entity to hass.data
* Add ref to hass in InsteonPLMEntity
* Pass hass correctly to InsteonPLMBinarySensor
* Fix reference to ALDBStatus.PARTIAL
* Print ALDB record as string
* Get ALDB record from memory address
* Reformat ALDB log output
* Add print_im_aldb service
* Remove reference to self in print_aldb_to_log
* Remove reference to self in print_aldb_to_log
* Fix spelling issue with load_all_link_database service
* Bump insteonplm to 0.9.1
* Changes from code review
* Code review changes
* Fix syntax error
* Correct reference to cv.boolean and update requirements
* Update requirements
* Fix flake8 errors
* Reload as boolean test
* Remove hass from entity init
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Add first version of the Matrix bot
* It's a stupid but necessary change…
* Dont list it twice
* All hail the linter!
* More linter-pleasing
* Use the correct user ID
* Add expression commands
* Add tests for new validators
* Fix room alias handling
* Wording
* Defer setup
* Simplify commands
* Handle exceptions
* Update requirements
* Review
* Move login back to constructor
* Fix review comments
* Add basic PostNL sensor (WIP)
* Update PostNL sensor
* Bump version
* Small updates to PostNL package based on feedback
* Remove unused import
* Pass api to sensor
* Refactor based on feedback
* Update based on feedback
* Fix feedback
* Clean up
* Bugfiix
* Bugfix
* SCAN_INTERVAL fix
* Remove unused import
* Refactor for new wrapper implementation
* Update postnl package requirement
* Change throttle logic
* Update package version
* Add new line
* Minor changes
* Change refresh time to 30 minutes
* Update requirements_all.txt
There's one particular QNAP model which sometimes return empty/null temperatures
for certain disks. This commit ensures that this model can be integrated with HASS
without causing KeyErrors or other exceptions - if this edge case is hit, the
sensor will simply show `0` instead.
* Recode to async version of homematicip-rest-api
* Remove blank line
* Cleanup of access point status class
* Fix to loong line
* Fix import errors
* Bugfix missing wait the _retry_task for sleep command
* Update comment
* Updates after review
* Small updates of logging and property name
* Fix DOMAIN and revert back to lowercase snakecase strings
* Fix intention and tripple double quotes
* Fix travis build
* Remove unnecessary state attributes
* Fix optional name in configuration
* Further reduction of state attributes
* Handle HomeKit configuration failure more cleanly
Add support for handling cases where HomeKit configuration fails, and give
the user more information about what to do.
* Don't consume the exception for a homekit.UnknownError
If we get an UnknownError then we should alert the user but also still
generate the backtrace so there's actually something for them to file in
a bug report.
* Fix up Eufy handling of colour lights
The Eufy colour lights have separate colour and temperature modes, and give
much less light output when in colour mode. Brightness is also handled in
a slightly confusing way, which means that state must be maintained in
order to avoid switching the light between modes by accident. Add some
additional handling for that.
* Bump the lakeside version
This version has important bugfixes for colour bulbs.
* Hound fixes
* Adding USCIS component
* Adding Line after the class DOC
* Update : Extract USCIS logic code to Component
* Update : Extract USCIS logic code to Component
* Adding CURRENT_STATUS
* Change Error handling, remove date from attributes
* Update the Version for USCIS
* Update uscis.py
* Add support for controlling homekit lights and switches
This adds support for controlling lights and switches that expose a HomeKit
control interface, avoiding the requirement to implement protocol-specific
components.
* Comment out the homekit requirement
This needs to build native code, so leave it commented for now
* Review updates
* Make HomeKit auto-discovery optional
Add an "enable" argument to the discovery component and add a list of
optional devices types (currently just HomeKit) to discover
* Further review comments
* Update requirements_all.txt
* Fix houndci complaints
* Further review updates
* Final review fixup
* Lint fixups
* Fix discovery tests
* Further review updates
* Add support for Eufy bulbs and switches
Add support for driving bulbs and switches from the Eufy range.
* Fix hound checks
* Satisfy pylint
* Handle review comments
* Review updates and test fixes
* PyLint is a bit too aggressive
* Added support for requesting RSSI values from Bluetooth devices
* Moved Bluetooth RSSI code to separate library and imported it
* Cleaned up tuple issues
* Changed concatination of mac addresses
* Changed string formatting to use new style
* Ran gen_requirements_all.py
* Added switch component to Amcrest IP Camera.
* Fixes to new switch component after review
* Removed redundant branching, as well as requirement declaration.
* Changes to requirements after rerunning generation script
* Minor changes
* Google Maps location sharing device tracker.
* Use ConfigType and change debug logging to _LOGGER.debug()
* Update to locationsharinglib 0.3.0
* Remove unneeded lines.
* Use hass.config.path for config file location.
* Fixed remarks
* Return boolean in setup_scanner
* Try config entries
* Testing
* Working flow
* Config entry text strings
* Removed manual inputs for config flow
* Support unloading of config entry
* Bump requirement to v33
* Fix comments from test
* Make sure that only one deCONZ instance can be set up
* Hass doesn't support unloading platforms yet
* Modify get_api_key to be testable
* Fix hound comments
* Add test dependency
* Add test for no key
* Bump requirement to v35
Add pydeconz to list of test components
* Don't have a check in async_setup that domain exists in hass.data
* update leak sensor
* Fix error when insteon state type is unknown
* Bump insteon version to 0.8.3
* Update requirements all and test
* Fix requirements conflicts due to lack of commit sync
* Requirements sync
* Rerun script/gen_requirements_all.py
* Try requirements update again
* Update requirements
* update leak sensor
* Fix error when insteon state type is unknown
* Bump insteon version to 0.8.3
* Update requirements all and test
* Fix requirements conflicts due to lack of commit sync
* Requirements sync
* Rerun script/gen_requirements_all.py
* Try requirements update again
* Update requirements
* Add @colinodell to CODEOWNERS for qnap sensor
* Bump qnapstats library to 0.2.5
This release adds better error handling for sharenames with no folder
* updated to new "b2vapi" of bimmer_connected
* updated requirements_all.txt
* updated 2 more vehicle names after rebase
* cleanup of import statements
* found one more broken name...
* removed unused constant
* cleanup of import statements 2
* Cast Integration Cleanup
* Fix long line
* Fixes and logging
* Fix tests
* Lint
* Report unknown state with None
* Lint
* Switch to async_add_job
Gets rid of those pesky "Setup of platform cast is taking over 10 seconds." messages.
* Re-introduce PlatformNotReady
* Add tests
* Remove unnecessary checks
* Test PlatformNotReady
* Fix async in sync context
* Blocking update
It's not using async anyway
* Upgrade pychromecast to 2.1.0
* Make reviewing easier
I like "protected" access, but I like reviewing more :)
* Make reviewing even easier :)
* Comment tests
* Initial commit on new asyncio based version
* Async version
* Lint
* updated to lasted pymediaroom version
* bump version
* optimistic state updates
* bump version
* Moved class import to method import
* async schedule and name correction
* Addresses @balloob comments
* missed fixes
* no unique_id for configuration based STB
* hound
* handle 2 mediaroom platforms
* Added a simple component to support the BLNET
Adds a component based on pyblnet, that hooks up the blnet to home assistant
* Adds support for custimzation of blnet sensor devices
* Setting up blnet as a platfrom
* Updated use of state_attributes
Now the friendly_name (and for digital values the mode) is set in the state_attributes whereas the name is defined as "blnet_(analog|digital)_{sensornumber}" so you can reliably add them to groups.
* Added support for the SyncThru printer web service
* Added pysyncthru to the requirements
* Changed to Dependencis, import inside setup_platform
* Switch back to REQUIREMENTS
Looks like DEPENDENCIES is not meant for python packages but for other HA components
* Fixed access to _attributes
* Final fix
* Several Bugfixes
When the printer goes offline, the last state will be kept.
Also now checks if the printer is reachable upon setup
* Register syncthru as discoverable
* Included possible conditions to monitor
* Split the printer sensor in several seperate sensor entities
* Fixed bug at sensor creation, pep8 conform
* Bugfix
* Bugfix
* Removed Blnet components
* Fixed unused import
* Renamed discoverable to samsung_printer
* Removed unused Attribute _friendly_name
* Inserted missing space
* Pinned requirements and added to coveragerc
* Reduced redundancy by condensing into multiple sub-classes
* Fixed indentation
* Fixed super constructor calls
* Fixed super constructor calls
* Fixed format
* Resolving style issues and using name instead of friendly_name
* Pinned pysyncthru in requirements_all, having trouble with friendly_name
* Iterating over dictionary instead of dict.keys()
* ran gen_reqirements_all.py
* Fixed flake 8 issues
* Added a simple component to support the BLNET
Adds a component based on pyblnet, that hooks up the blnet to home assistant
* Implemented requested changes
* raised dependecies to pysyncthru version that has timeouts
* Raised required version for full timeout support
* Adds support for custimzation of blnet sensor devices
* Setting up blnet as a platfrom
* Updated use of state_attributes
Now the friendly_name (and for digital values the mode) is set in the state_attributes whereas the name is defined as "blnet_(analog|digital)_{sensornumber}" so you can reliably add them to groups.
* Added support for the SyncThru printer web service
* Added pysyncthru to the requirements
* Removed Blnet components
* Pinned requirements and added to coveragerc
* Fixed indentation
* Fixed format
* Pinned pysyncthru in requirements_all, having trouble with friendly_name
* ran gen_reqirements_all.py
* Updated requirements_all
* Renamed sensor objects, removed passing of hass entity
* Removed merge artifacts
* Reset syncthru to newest state
* Updated requirements_all
* switched to using the newest version of pysyncthru
* Sorted coveragerc
* add ability to set fan on
* add tests and change "not on" status to "auto"
* hound fix
* more hounds
* I don't understand new lines
* fix linting errors
* more linting fixes
* change method signature
* lint fixes
* hopefully last lint fix
* correct temp ranges according to ecobee API docs
* update dependency to latest version
* update tests with values from new temp logic
* fix linting issue
* more linting fixes
* add SUPPORT_FAN_MODE to capabilities
* add fan_list to attributes.
restore current fan state to OFF if fan is not running.
change target high/low temps from null to target temp when not in auto mode.
change target temp from null to high/low temp when in auto mode
change mode attribute to climate_mode for consistency with other lists.
* remove unused import
* simplify logic
* lint fixes
* revert change for target temps
* Add initial support fo HomematicIP components
* Fix module import
* Update reqirments file as well
* Added HomematicIP files
* Update to homematicip
* Code cleanup based on highligted issues
* Update of reqiremnets file as well
* Fix dispatcher usage
* Rename homematicip to homematicip_cloud
* phue -> aiohue
* Clean up
* Fix config
* Address comments
* Typo
* Fix rebase error
* Mark light as unavailable when bridge is disconnected
* Tests
* Make Throttle work with double delay and async
* Rework update logic
* Don't resolve host to IP
* Clarify comment
* No longer do unnecessary updates
* Add more doc
* Another comment update
* Wrap up tests
* Lint
* Fix tests
* PyLint does not like mix 'n match async and coroutine
* Lint
* Update aiohue to 1.2
* Lint
* Fix await MagicMock
* Xiaomi MiIO Sensor: Xiaomi Air Quality Monitor (PM2.5) integration.
* Missing newline added.
* Use a unique data key per domain.
* turn_{on,off} service moved to __init__.py.
* All sensors group added.
* Sensor is a ToggleEntity now.
* is_on property added.
* Use Async / await syntax.
* Make hound happy.
* Unique id added.
* Turn on/off service removed from abstract sensor.
* Turn on/off methods removed.
Device unavailable handling improved.
* Unused import removed.
* Sensor migrated back to an entity.
* Rebased and requirements updated.
* Added Foobot device sensor
* Added error handling tests
* Corrections after PR review.
* Migrated to async/await syntax
* lint fixes
* stop raising HomeAssistantError
* debug log for number of requests
* Moved shared data between sensors from a class attribute to a separate class
* Made test more async-aware
disabled setup error test for now as it's not working
* Working failure scenarios tests
* Added vesync platform
Support for power toggling, current power, and daily energy kWh
* Adds vesync to requirements file.
* Reorder vesync item in requirements_all.txt from gen_requirements_all
* Removes unnecessary global values that are not used in this component
* Removes try/catch from setup_platform -no throws. Guard check login()
* Remove unnecessary boolean convert
* Fix indentation of log messages
* Add spotcrime.py to dev
* Modify sensor to accept user API key
* Update Spotcrime to 1.0.3 in requirements_all.txt
* Fix line 76 (97 > 79 characters)
* Fix lint errors
Paulus Schoutsen
thelittlefireman
ChristianKuehnel
Paulus Schoutsen
Nate Clark
c727
Matthew Garrett
Gregory Benner
Fabian Affolter
Robert Svensson
Daniel Høyer Iversen
Sebastian Muszynski
Matthew Treinish
Martin Hjelmare
Andrey
David Broadfoot
Gerard
Javier Gonel
Jerad Meisner
Russell Cloran
Tom Harris
Jesse Newland
Lukas Barth
cdce8p
Erik Eriksson
Mick Vleeshouwer
Mathieu Velten
Mohamad Tarbin
Diogo Gomes
engrbm87
Charles Garwood
Aaron Bach
ratcash
Colin O'Dell
Daniel Perna
Mattias Welponer
Mitko Masarliev
John Mihalic
Johann Kellerman
Rohan Kapoor
Viorel Stirbu
koolsb
Mister Wil
Heiko Thiery
karlkar
Thibault Cohen
Fabien Piuzzi
Khole
geekofweek
Marco Orovecchia
citruz
Philipp Schmitt
Wolfgang Malgadey
Frederik Bolding
Andrew
Myrddyn
Rene Nulsch
Joe Lu
Michaël Arnauts
Åskar Andersson
Robin
Lewis Juggins
phileaton
Lindsay Ward
Teemu R
Otto Winter
Jeroen ter Heerdt
Sergio Viudes
nielstron
uchagani
cburgess
cgtobi
BioSehnsucht
Mark Perdue
JC Connell