* Recreate component if discovery info is changed
* Update component instead of remove+add
* Set name and unique_id in __init__
* Update unit test
* Cleanup
* More cleanup
* Refactor according to review comments
* Change discovery_hash
* Review comments, add tests
* Fix handling of value_template
* Remove FFmpeg input tests
* Not needed here
* Removing tests for removed functionality
* Minor lint
* Fix tests to reflect removed config option
* Remove async service registration by request
* More lint
* Unused imports
* Make it a non-breaking change
* Update ffmpeg.py
* Add support for off_delay to MQTT binary_sensor
* Fix debounce, add testcase
* Make off_delay number of seconds instead of timedelta
* Update mqtt.py
* Fix testcase, remove CONF_OFF_DELAY from const.py
* Use pyspcwebgw library.
* Support alarm triggering.
* Update requirements.
* Add pyspcwebgw to test reqs.
* Also update script.
* Use dispatcher.
* Address review feedback.
* create binary sensor even if initial update fails
* fixed broken test assertion
* fixed broken test assertion
* avoid fetching resource twice - manually in the setup_platform and then through add_devices
* raising PlatformNotReady instead of creating the sensor if the initial rest call fails; throttling the update to avoid fetching the same resource again immediately after setting up sensor
* rolled back throttling of the rest update call; can still avoid updating the binary sensor's rest resoure twice; fixed tests
* typo
* De-run_forever()-ization
* Use asyncio.run (or our own implementation on Python <3.7)
* hass.start is only used by tests
* setup_and_run_hass() is now async
* Add "main" async hass.run method
* move SIGINT handling to helpers/signal.py
* add flag to .run to disable hass's signal handlers
* Teach async_start and async_stop to not step on each other
(more than necessary)
* shorten over-long lines
* restore missing "import asyncio"
* move run_asyncio to homeassistant.util.async_
* LOGGER: warn => warning
* Add "force" flag to async_stop
only useful for testing
* Add 'attrs==18.2.0' to requirements_all.txt
Required for keeping requirements_test_all.txt in sync, where it is in
turn required to prevent auto-downgrading "attrs" during "pip install"
* Fixes for mypy
* Fix "mock_signal" fixture
* Revert mistaken edit
* Flake8 fixes
* mypy fixes
* pylint fix
* Revert adding attrs== to requirements_test*.txt
solved by using "pip -c"
* Rename "run" to "async_run", as per calling conventions
## Description:
More fixes flagged by pylint 2 that don't hurt to have before the actual pylint 2 upgrade (which I'll submit soon).
## Checklist:
- [ ] The code change is tested and works locally.
- [x] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
* Option to load or not to load clip sensors on start
* Full flow
* Fix config flow and add tests
* Fix attribute dark reporting properly
* Imported and properly configured deCONZ shouldn't need extra input to create config entry
* Add new device without restarting hass
* Remove debug prints
* Fix copy paste error
* Fix comments from balloob
Add tests to verify signalling with new added devices
* Fix hound comments
Add test to verify when new sensor is added
* Fix tests
* Unload entry should unsubscribe all deconz dispatchers
* Make sure mock setup also creates unsub in hass data
* Fix copy paste issue
* Lint
* Use forward entry setup with light platform
* Move sensor to forward entry setup
* Use forward entry setup with binary sensors
* Use forward entry setup with scene platform
* Remove import of unused functionality
* Move deconz setup in to setup entry
Create initial negative tests for setup entry
* Fix hound comment
* Improved tests
* Add test for scene platform
* Add test for binary sensor platform
* Add test for light platform
* Add test for light platform
* Add test for sensor platform
* Fix hound comment
* More asserts on sensor types
* Extend Threshold binary sensor to support ranges
- Adds support for ranges
- Threshold type (lower, upper, range) is defined by supplied
thresholds (lower, upper)
- Adds verbose status/position relative to threshold as attribute
(position)
* Minor changes (ordering, names, etc.)
* Update name
* Update name
* Add attribute to show who last un/set alarm.
This allows showing the name of the SPC user who last
issued an arm/disarm command and also allows for
automations to depend on this value.
* Optimize
* Update spc.py
* Update spc.py
* fix
* Fix test.
* Fix for removed is_state_attr.
* Initial commit of Vultr components
Have a working Vultr hub and binary sensor which pulls down the
following attributes of your VPS:
- Date created
- Subscription id (server id)
- Cost per month (in US$)
- Operating System installed
- IPv4 address
- label (human readable name)
- region
- number of vcpus
- which storage package chosen
- IPV6 address (if applicable)
- RAM amount
Working next on sensor and then testing / coverage.
* Added Vultr sensor for pending charges and current bandwidth. Refactored binary_sensor and hub too
* Corrected is_on bases
* Added basic tests for Vultr binary & platform
* Updated require files
* Changing test fixture to highlight different cases
* Written basic test for sensor.vultr
* Resolved linting errors and broken test
* Increase test coverage and corrected docs
* Resolved hound issues
* Revert back negative binary test
* Another hound resolve
* Refactoring and adding is switch, moving over to vultr branch
* Made Vultr components more resiliant to invalid configs
* Added negetive test for vultr binary sensor
* Added better testing of vultr sensor
* Resolved vultr platform test affecting subsequent vultr tests
* Moving VULTR components to single use design
* Added in sensor name config
* Added missing sensors var
* Resolved init data setting of sensors, added in name conf to switch
* Made the Vultr component more resiliant to startup failure with better alerting
* Various Vultr component changes
- Refactored sensor, binary_sensor, and switch to reference one subscription
- Renamed CURRENT_BANDWIDTH_GB monitored condition to CURRENT_BANDWIDTH_USED
- Improved test coverage
* Resolved local tox linting issue
* Added more testing for Vultr switch
* Improved test coverage for Vultr components
* Made PR comment changes to vultr binary sensor
* Made PR comment changes to Vultr sensor
* resolved PR comments for Vultr Switch
* Resolved vultr sensor name and improved tests
* Improved Vultr switch testing (default name formatting)
* Removed vultr hub failure checking
* Trend sensor now uses linear regression to calculate trend
* Added numpy to trend sensor test requirements
* Added trendline tests
* Trend sensor now has max_samples attribute
* Trend sensor uses utcnow from HA utils
* Trend sensor now completes setup in async_added_to_hass
* Fixed linter issues
* Fixed broken import
* Trend tests make use of max_samples
* Added @asyncio.coroutine decorator to trend update callback
* Update trend.py
* Extended Ring DoorBell to support camera playback and wifi sensors
* Bump python-ringdoorbell to version 0.1.6
* Support to camera playback via ffmpeg
* Extended ringdoorbell sensors to report WiFi attributes
* Extended unittests
* Makes lint happy
* Added support to stickup cameras and fixed logic
* Fixed unittests for stickup cameras
* Makes lint happy
* Refactored attributions and removed extra refresh method.